LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Dennis Fritz

Sat, 17 Mar 2007 19:43:58 EDT

Tan, Geok Ang

Sun, 18 Mar 2007 15:49:22 +0800

Inge

Sun, 18 Mar 2007 09:47:53 +0100

Tan, Geok Ang

Mon, 19 Mar 2007 07:27:45 +0800

Stadem, Richard D.

Mon, 19 Mar 2007 07:30:49 -0500

Tan, Geok Ang

Mon, 19 Mar 2007 21:27:52 +0800

Hernefjord Ingemar

Mon, 19 Mar 2007 15:57:25 +0100

John Maxwell

Mon, 19 Mar 2007 09:06:16 -0700

(2) [TN] Paste Volume, off contact vs non off contact

Inge

Mon, 19 Mar 2007 18:46:38 +0100

Re: (2) [TN] Paste Volume, off contact vs non off contact

Barmuta, Michael

Mon, 12 Mar 2007 13:12:58 -0700

Re: (2) [TN] Paste Volume, off contact vs non off contact

Matt Kehoe-SIPAD Systems

Mon, 12 Mar 2007 18:19:05 -0400

Re: (2) [TN] Paste Volume, off contact vs non off contact

Barmuta, Michael

Mon, 12 Mar 2007 15:52:14 -0700

Re: (2) [TN] Paste Volume, off contact vs non off contact

Ryan Grant

Tue, 13 Mar 2007 08:42:24 -0600

<List>[TN] immersion silver and exposed copper in small vias

Re: <List>[TN] immersion silver and exposed copper in small vias

Gary Warner

Tue, 6 Mar 2007 11:48:00 -0700

Joe Fjelstad

Tue, 27 Mar 2007 19:31:22 -0400

Mike Buetow

Tue, 27 Mar 2007 18:50:04 -0500

Joe Fjelstad

Tue, 27 Mar 2007 23:11:59 EDT

Alpha 5003 flux

James TerVeen

Tue, 6 Mar 2007 09:39:06 -0500

AlSiC

Inge

Tue, 20 Mar 2007 20:39:20 +0100

Creswick, Steven

Wed, 21 Mar 2007 07:15:31 -0400

Marsico, James

Wed, 21 Mar 2007 07:21:55 -0400

Hernefjord Ingemar

Thu, 22 Mar 2007 08:04:57 +0100

Hernefjord Ingemar

Thu, 22 Mar 2007 08:07:55 +0100

Creswick, Steven

Thu, 22 Mar 2007 08:20:01 -0400

Marsico, James

Thu, 22 Mar 2007 08:26:33 -0400

Marsico, James

Thu, 22 Mar 2007 08:30:23 -0400

Creswick, Steven

Thu, 22 Mar 2007 08:38:15 -0400

Leo Higgins

Thu, 22 Mar 2007 23:19:00 -0700

Inge

Fri, 23 Mar 2007 20:03:39 +0100

AlSiC conclusion

Inge

Thu, 22 Mar 2007 18:55:57 +0100

Stadem, Richard D.

Thu, 22 Mar 2007 13:10:16 -0500

Marsico, James

Thu, 22 Mar 2007 14:16:58 -0400

Creswick, Steven

Thu, 22 Mar 2007 14:22:22 -0400

Alternative SAC

Gabriela Bogdan

Fri, 30 Mar 2007 13:17:48 +0200

Re: Alternative SAC

arnaud grivon

Fri, 30 Mar 2007 13:29:53 +0200

Re: Alternative SAC

Gabriela Bogdan

Fri, 30 Mar 2007 13:45:54 +0200

Re: Alternative SAC

Christopher Nash

Fri, 30 Mar 2007 12:00:37 -0400

Alternative SAC (NTC)

Hogg, Blair K.

Fri, 30 Mar 2007 08:16:06 -0400

John Burke

Fri, 30 Mar 2007 07:30:36 -0700

Stadem, Richard D.

Fri, 30 Mar 2007 09:49:03 -0500

Drew meyer

Fri, 30 Mar 2007 09:54:48 -0600

Whittaker, Dewey (EHCOE)

Fri, 30 Mar 2007 07:56:40 -0700

Whittaker, Dewey (EHCOE)

Fri, 30 Mar 2007 08:00:03 -0700

John Burke

Fri, 30 Mar 2007 09:41:14 -0700

David D. Hillman

Fri, 30 Mar 2007 11:45:12 -0500

John Burke

Fri, 30 Mar 2007 09:49:26 -0700

An IPC webcast you shouldn't miss - Embedded Passive Components - Costs More or Costs Less?

Whittaker, Dewey (EHCOE)

Fri, 30 Mar 2007 10:26:39 -0700

Tina Nerad

Thu, 22 Mar 2007 09:25:37 -0500

Anybody else have trouble getting things from Pace?

Steve Gregory

Thu, 8 Mar 2007 15:19:40 -0600

Re: Anybody else have trouble getting things from Pace?

Bloomquist, Ken

Thu, 8 Mar 2007 13:32:13 -0800

Re: Anybody else have trouble getting things from Pace?

Phil Nutting

Thu, 8 Mar 2007 16:56:56 -0500

Re: Anybody else have trouble getting things from Pace?

John Burke

Thu, 8 Mar 2007 15:14:32 -0800

Re: Anybody else have trouble getting things from Pace?

John Burke

Thu, 8 Mar 2007 15:26:23 -0800

APEX NTC

Re: APEX NTC

Wrobel, Clayton

Fri, 2 Mar 2007 10:40:55 -0500

Re: APEX NTC

John Burke

Fri, 2 Mar 2007 08:44:00 -0800

Approved Substitute for Mil-P-13949/7 (GR)

Marty W. Sheppard

Mon, 26 Mar 2007 06:47:28 -0600

Re: Approved Substitute for Mil-P-13949/7 (GR)

ekalgren

Mon, 26 Mar 2007 10:27:20 -0400

A_50 SIR Phoenix Board

John Parsons

Mon, 19 Mar 2007 15:03:00 -0700

Re: A_50 SIR Phoenix Board

Douglas O. Pauls

Mon, 19 Mar 2007 21:47:22 -0500

Re: A_50 SIR Phoenix Board

Stadem, Richard D.

Tue, 20 Mar 2007 08:01:47 -0500

BGA Die Attach Criteria

Victor G. Hernandez

Tue, 13 Mar 2007 06:55:42 -0500

Re: BGA Die Attach Criteria

Inge

Tue, 13 Mar 2007 18:44:42 +0100

BGA footprint

Bob Perkins

Thu, 1 Mar 2007 16:36:18 -0800

Wayne Thayer

Thu, 1 Mar 2007 22:05:56 -0500

David Greig

Fri, 2 Mar 2007 10:31:09 -0000

Terry Kozlyk

Fri, 2 Mar 2007 05:00:56 -0700

Stadem, Richard D.

Fri, 2 Mar 2007 08:03:40 -0600

Haynes, Kim

Fri, 2 Mar 2007 10:41:34 -0600

Stadem, Richard D.

Fri, 2 Mar 2007 11:09:22 -0600

David Greig

Fri, 2 Mar 2007 17:35:19 -0000

Call for registration - IPC Lead Free workshops - 4/17/07 & 4/18/07, in Bannockburn, IL

Stadem, Richard D.

Fri, 2 Mar 2007 12:25:03 -0600

Tina Nerad

Tue, 13 Mar 2007 15:19:40 -0500

Call for Registration - IPC REACH Webcast Series

Tina Nerad

Thu, 15 Mar 2007 14:56:49 -0500

CC fixture issue

Jeff Smith

Thu, 8 Mar 2007 14:10:36 -0600

Re: CC fixture issue

Douglas O. Pauls

Fri, 9 Mar 2007 08:25:09 -0600

Re: CC fixture issue

Dehoyos, Ramon

Fri, 9 Mar 2007 12:55:01 -0500

Chip Capacitor Reliability Question

Leland Woodall

Mon, 5 Mar 2007 18:22:27 -0600

John Maxwell

Mon, 5 Mar 2007 17:27:49 -0800

Wenger, George M.

Mon, 5 Mar 2007 21:12:36 -0500

Hernefjord Ingemar

Tue, 6 Mar 2007 09:11:13 +0100

Werner Engelmaier

Tue, 6 Mar 2007 11:52:11 EST

Chip Scale Packagine (CSP)

Whittaker, Dewey (EHCOE)

Tue, 6 Mar 2007 10:16:23 -0700

Upton, Shawn

Tue, 13 Mar 2007 09:50:39 -0400

Eric CHRISTISON

Tue, 13 Mar 2007 14:09:45 +0000

Upton, Shawn

Tue, 13 Mar 2007 10:30:13 -0400

Upton, Shawn

Thu, 15 Mar 2007 08:08:16 -0400

Guy Ramsey

Thu, 15 Mar 2007 08:40:22 -0400

cleaning conformally coated boards

Upton, Shawn

Thu, 15 Mar 2007 08:48:34 -0400

Edward Mines

Thu, 29 Mar 2007 07:10:23 -0700

Cofired gold

Hernefjord Ingemar

Thu, 29 Mar 2007 15:38:32 +0200

Creswick, Steven

Thu, 29 Mar 2007 10:13:48 -0400

Creswick, Steven

Thu, 29 Mar 2007 12:57:32 -0400

Wayne Thayer

Fri, 30 Mar 2007 06:18:18 -0400

Creswick, Steven

Fri, 30 Mar 2007 06:55:59 -0400

Cognex Vision Card Repair Update...

Joyce Koo

Fri, 30 Mar 2007 08:48:24 -0500

Re: Cognex Vision Card Repair Update...

prakash

Sun, 11 Mar 2007 23:29:56 +0800

COMPATIBILITY

BADRI

Wed, 28 Mar 2007 19:37:18 +0530

Paymon Sani

Wed, 28 Mar 2007 11:57:44 -0400

Louis, Edwin @ CSE

Wed, 28 Mar 2007 12:57:14 -0400

Werner Engelmaier

Wed, 28 Mar 2007 13:19:35 EDT

Paymon Sani

Wed, 28 Mar 2007 13:49:01 -0400

Paymon Sani

Wed, 28 Mar 2007 14:37:17 -0400

Component Orientation Survey

Dehoyos, Ramon

Wed, 28 Mar 2007 15:26:09 -0400

component orientation

Louis Hart

Thu, 1 Mar 2007 13:26:13 -0500

Tempea, Ioan

Thu, 1 Mar 2007 07:53:26 -0500

Steve Gregory

Thu, 1 Mar 2007 07:02:50 -0600

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 06:47:18 -0700

Joyce Koo

Thu, 1 Mar 2007 08:53:41 -0500

Dale Ritzen

Thu, 1 Mar 2007 07:55:26 -0600

McGlaughlin, Jeffrey A

Thu, 1 Mar 2007 09:02:01 -0500

Upton, Shawn

Thu, 1 Mar 2007 09:03:20 -0500

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 07:10:07 -0700

Steve Smith

Thu, 1 Mar 2007 09:10:33 -0500

Joyce Koo

Thu, 1 Mar 2007 09:25:19 -0500

Bill Kasprzak

Thu, 1 Mar 2007 09:30:09 -0500

Upton, Shawn

Thu, 1 Mar 2007 09:34:22 -0500

Dale Ritzen

Thu, 1 Mar 2007 08:40:19 -0600

Dehoyos, Ramon

Thu, 1 Mar 2007 09:43:25 -0500

Stadem, Richard D.

Thu, 1 Mar 2007 08:59:25 -0600

Chris Ball

Thu, 1 Mar 2007 10:27:57 -0500

Phil Nutting

Thu, 1 Mar 2007 10:32:05 -0500

Douglas O. Pauls

Thu, 1 Mar 2007 10:10:25 -0600

Roger Stoops

Thu, 1 Mar 2007 11:20:18 -0500

Ted Tontis

Thu, 1 Mar 2007 10:24:43 -0600

Greg Scott

Thu, 1 Mar 2007 08:39:28 -0800

Bill Kasprzak

Thu, 1 Mar 2007 11:54:06 -0500

Comps on opposite side of PCB sharing GND vias

Phil Nutting

Thu, 1 Mar 2007 08:56:31 -0500

Terry Kozlyk

Tue, 13 Mar 2007 05:10:17 -0600

Re: Comps on opposite side of PCB sharing GND vias

Upton, Shawn

Tue, 13 Mar 2007 08:25:10 -0400

Re: Comps on opposite side of PCB sharing GND vias

Dave Seymour

Tue, 13 Mar 2007 08:43:43 -0400

conformal coating repair

Edward Mines

Tue, 6 Mar 2007 06:30:17 -0800

copper deterioration (NTC?)

Louis Hart

Thu, 8 Mar 2007 14:15:54 -0500

John Burke

Thu, 8 Mar 2007 11:24:45 -0800

Whittaker, Dewey (EHCOE)

Thu, 8 Mar 2007 13:38:06 -0700

Brian Ellis

Fri, 9 Mar 2007 14:16:42 +0200

Hernefjord Ingemar

Fri, 9 Mar 2007 13:25:16 +0100

Hernefjord Ingemar

Fri, 9 Mar 2007 14:45:43 +0100

Darrel Therriault is out of the office until 11/27/06.

Joyce Koo

Fri, 9 Mar 2007 08:58:28 -0500

Darrel Therriault

Thu, 29 Mar 2007 01:12:50 -0700

Double sided reflow

Tempea, Ioan

Tue, 27 Mar 2007 15:42:32 -0400

Phillip Bavaro

Thu, 29 Mar 2007 03:44:49 +0800

Tempea, Ioan

Wed, 28 Mar 2007 16:13:01 -0400

Dehoyos, Ramon

Wed, 28 Mar 2007 16:27:32 -0400

Macko, Joe @ IEC

Wed, 28 Mar 2007 12:33:53 -0800

Paymon Sani

Wed, 28 Mar 2007 16:53:32 -0400

Guy Ramsey

Wed, 28 Mar 2007 16:56:08 -0400

Phillip Bavaro

Thu, 29 Mar 2007 05:12:37 +0800

Stadem, Richard D.

Wed, 28 Mar 2007 16:41:09 -0500

Stadem, Richard D.

Wed, 28 Mar 2007 16:44:46 -0500

Double sided reflow... clarification

Paymon Sani

Wed, 28 Mar 2007 23:07:59 -0400

Re: Double sided reflow... clarification

Tempea, Ioan

Fri, 30 Mar 2007 08:12:04 -0400

Dry Film Thickness

Fri, 16 Mar 2007 11:22:10 -0400

Chezhian, Krishnan (Radhakrishnan)

Fri, 16 Mar 2007 23:33:46 +0800

Chuck Brummer

Fri, 16 Mar 2007 10:29:45 -0700

R Sedlak

Fri, 16 Mar 2007 12:54:10 -0700

Re: EN 1000015 vs. ESD 20.20

Jeffrey Bush

Fri, 16 Mar 2007 15:46:16 -0400

EN 1000015 vs. ESD 20.20

Dale Ritzen

Thu, 8 Mar 2007 16:29:38 -0600

Juan T. MarugÃ¡n

Fri, 9 Mar 2007 01:09:02 -0600

Engineering Question [NTC]

Re: Engineering Question [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 12:44:37 EDT

Engineering Question

Bloomquist, Ken

Fri, 16 Mar 2007 07:48:59 -0700

Werner Engelmaier

Fri, 16 Mar 2007 11:08:06 EDT

Bloomquist, Ken

Fri, 16 Mar 2007 08:16:56 -0700

Stadem, Richard D.

Fri, 16 Mar 2007 10:22:26 -0500

Dave Seymour

Fri, 16 Mar 2007 11:22:49 -0400

Ryan Grant

Fri, 16 Mar 2007 09:30:50 -0600

John Burke

Fri, 16 Mar 2007 08:36:26 -0700

Dehoyos, Ramon

Fri, 16 Mar 2007 11:40:47 -0400

Bloomquist, Ken

Fri, 16 Mar 2007 08:43:51 -0700

Werner Engelmaier

Fri, 16 Mar 2007 11:51:44 EDT

Werner Engelmaier

Fri, 16 Mar 2007 11:55:16 EDT

John Burke

Fri, 16 Mar 2007 09:07:12 -0700

Stadem, Richard D.

Fri, 16 Mar 2007 11:21:08 -0500

Stadem, Richard D.

Fri, 16 Mar 2007 11:22:27 -0500

Werner Engelmaier

Fri, 16 Mar 2007 12:33:34 EDT

Dehoyos, Ramon

Fri, 16 Mar 2007 12:41:01 -0400

John Burke

Fri, 16 Mar 2007 09:43:12 -0700

Werner Engelmaier

Fri, 16 Mar 2007 12:49:56 EDT

Wood, Kenneth

Fri, 16 Mar 2007 12:53:38 -0400

Engineering Question [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 12:58:09 EDT

Re: Engineering Question [NTC]

Genny Gibbard

Fri, 16 Mar 2007 10:34:47 -0600

Re: Engineering Question [NTC]

Joe Fjelstad

Sat, 17 Mar 2007 16:57:03 -0400

Environmental Tests For PCB

Clayton @ Reliability Resources

Fri, 30 Mar 2007 12:36:54 -0700

Re: Environmental Tests For PCB

Werner Engelmaier

Fri, 30 Mar 2007 20:00:08 EDT

ESD charges in conformal coatings

Hernefjord Ingemar

Tue, 27 Mar 2007 13:09:18 +0200

Marsico, James

Tue, 27 Mar 2007 07:25:47 -0400

Dehoyos, Ramon

Tue, 27 Mar 2007 08:33:03 -0400

Hernefjord Ingemar

Tue, 27 Mar 2007 14:34:15 +0200

Hernefjord Ingemar

Tue, 27 Mar 2007 14:53:32 +0200

ESD charges in conformal coatings (conclusion)

James Verrette

Wed, 28 Mar 2007 08:52:35 -0400

Inge

Wed, 28 Mar 2007 19:08:24 +0200

Phillip Bavaro

Thu, 29 Mar 2007 03:30:52 +0800

Hernefjord Ingemar

Thu, 29 Mar 2007 07:57:42 +0200

Dehoyos, Ramon

Thu, 29 Mar 2007 08:37:02 -0400

ESD control and fans

Joel Alexander

Mon, 12 Mar 2007 14:52:19 -0500

Re: ESD control and fans

Brian Ellis

Tue, 13 Mar 2007 11:39:22 +0200

Re: ESD control and fans

Gene Felder

Tue, 13 Mar 2007 08:08:00 -0700

Re: ESD control and fans

Inge

Tue, 13 Mar 2007 18:19:11 +0100

ESD question

Bob Arciolla

Mon, 5 Mar 2007 08:57:11 -0500

Graham Collins

Mon, 5 Mar 2007 09:11:49 -0500

Hernefjord Ingemar

Mon, 5 Mar 2007 15:18:14 +0100

Roger Stoops

Mon, 5 Mar 2007 09:22:03 -0500

Douglas O. Pauls

Mon, 5 Mar 2007 08:23:45 -0600

Hogg, Blair K.

Mon, 5 Mar 2007 09:21:48 -0500

Stadem, Richard D.

Mon, 5 Mar 2007 08:51:33 -0600

Hernefjord Ingemar

Mon, 5 Mar 2007 16:17:22 +0100

Gene Felder

Mon, 5 Mar 2007 08:17:07 -0800

Hernefjord Ingemar

Tue, 6 Mar 2007 12:58:31 +0100

Joyce Koo

Tue, 6 Mar 2007 08:40:54 -0500

Guy Ramsey

Tue, 6 Mar 2007 09:07:54 -0500

Explanation of Cpk (Ppk)

Ryan Grant

Wed, 28 Mar 2007 09:39:06 -0600

Lee parker

Wed, 28 Mar 2007 11:45:53 -0400

Eric CHRISTISON

Wed, 28 Mar 2007 16:57:49 +0100

Re: Explanation of CpK (Ppk)

Louis Hart

Wed, 28 Mar 2007 12:20:06 -0400

Richard Kraszewski

Wed, 28 Mar 2007 11:51:11 -0500

Kathy Kuhlow

Wed, 28 Mar 2007 14:12:38 -0500

Jeffrey Bush

Wed, 28 Mar 2007 16:48:19 -0400

Ryan Grant

Wed, 28 Mar 2007 16:52:03 -0600

Flex Circuit Scratch...

Steve Gregory

Thu, 15 Mar 2007 09:35:14 -0500

Joe Fjelstad

Thu, 15 Mar 2007 13:22:25 EDT

Kerry McMullen

Thu, 15 Mar 2007 13:25:45 -0500

Steve Kelly

Thu, 15 Mar 2007 16:55:56 -0400

ZLATKO BIJEDIC

Thu, 15 Mar 2007 16:04:31 -0700

Flip-flop panels

Tempea, Ioan

Fri, 2 Mar 2007 13:23:13 -0500

John Parsons

Fri, 2 Mar 2007 10:51:18 -0800

Steve Gregory

Fri, 2 Mar 2007 13:09:25 -0600

Tempea, Ioan

Fri, 2 Mar 2007 14:15:33 -0500

John Parsons

Fri, 2 Mar 2007 11:29:34 -0800

Frank Kimmey

Fri, 2 Mar 2007 11:32:01 -0800

Dehoyos, Ramon

Fri, 2 Mar 2007 15:19:59 -0500

Stadem, Richard D.

Fri, 2 Mar 2007 14:58:41 -0600

Ryan Grant

Fri, 2 Mar 2007 14:15:27 -0700

Whittaker, Dewey (EHCOE)

Fri, 2 Mar 2007 14:31:19 -0700

Sherif Refaat

Fri, 2 Mar 2007 16:31:32 -0500

Footprint standards for Polarized components (Diodes)

Stadem, Richard D.

Fri, 2 Mar 2007 15:35:06 -0600

Gary Bremer

Tue, 27 Mar 2007 21:47:22 -0700

Re: Footprint standards for Polarized components (Diodes)

Al Onderick

Wed, 28 Mar 2007 15:27:30 -0500

Footprint standards for Polarized components (Diodes)

Bob Wilson

Wed, 28 Mar 2007 15:48:19 -0700

FPGA (DSP)

Inge

Sat, 10 Mar 2007 20:04:38 +0100

Wayne Thayer

Sun, 11 Mar 2007 09:59:47 -0500

Inge

Sun, 11 Mar 2007 19:07:12 +0100

Inge

Sun, 11 Mar 2007 23:12:23 +0100

Hernefjord Ingemar

Mon, 12 Mar 2007 12:14:32 +0100

Wayne Thayer

Mon, 12 Mar 2007 08:56:57 -0400

- bogert

Mon, 12 Mar 2007 08:31:59 -0500

Hernefjord Ingemar

Mon, 12 Mar 2007 16:02:12 +0100

Hernefjord Ingemar

Mon, 12 Mar 2007 16:28:17 +0100

Inge

Mon, 12 Mar 2007 21:33:09 +0100

Hogg, Blair K.

Tue, 13 Mar 2007 08:56:21 -0400

Hernefjord Ingemar

Tue, 13 Mar 2007 14:16:15 +0100

Stadem, Richard D.

Wed, 14 Mar 2007 08:09:49 -0500

FR408 vs. FR-4 in RoHS Compliant SMT Process

Hernefjord Ingemar

Wed, 14 Mar 2007 15:52:27 +0100

Dale Ritzen

Mon, 12 Mar 2007 10:21:41 -0600

Gerard O'Brien

Mon, 12 Mar 2007 12:22:11 -0500

Ian Hanna

Mon, 12 Mar 2007 11:48:03 -0500

Werner Engelmaier

Mon, 12 Mar 2007 13:03:45 EDT

Werner Engelmaier

Mon, 12 Mar 2007 13:12:26 EDT

Gerard O'Brien

Mon, 12 Mar 2007 14:53:01 -0500

Jeffrey Bush

Mon, 12 Mar 2007 14:43:25 -0400

Friday Poem NTC

Inge

Fri, 2 Mar 2007 18:50:25 +0100

Gold %

Christopher Nash

Mon, 26 Mar 2007 11:41:39 -0400

Paymon Sani

Mon, 26 Mar 2007 12:29:16 -0400

Stadem, Richard D.

Mon, 26 Mar 2007 12:33:56 -0500

P. Langeveld

Mon, 26 Mar 2007 19:39:16 +0200

Stadem, Richard D.

Mon, 26 Mar 2007 12:58:33 -0500

Christopher Nash

Mon, 26 Mar 2007 14:09:33 -0400

Gold Ball Bond attaching surface roughness

Werner Engelmaier

Mon, 26 Mar 2007 14:04:42 EST

Victor G. Hernandez

Thu, 15 Mar 2007 07:25:17 -0500

Creswick, Steven

Thu, 15 Mar 2007 08:36:03 -0400

Inge

Thu, 15 Mar 2007 18:23:07 +0100

Victor G. Hernandez

Thu, 15 Mar 2007 13:48:00 -0500

Creswick, Steven

Thu, 15 Mar 2007 14:51:10 -0400

Victor G. Hernandez

Thu, 15 Mar 2007 15:26:18 -0500

Inge

Thu, 15 Mar 2007 22:18:22 +0100

Inge

Thu, 15 Mar 2007 22:31:26 +0100

Stadem, Richard D.

Thu, 15 Mar 2007 17:30:14 -0500

Stadem, Richard D.

Thu, 15 Mar 2007 17:35:18 -0500

stephengregory5849

Thu, 15 Mar 2007 17:47:37 -0500

Creswick, Steven

Fri, 16 Mar 2007 06:12:21 -0400

Victor G. Hernandez

Fri, 16 Mar 2007 05:38:28 -0500

Inge

Fri, 16 Mar 2007 20:02:27 +0100

Leo Higgins

Sun, 18 Mar 2007 15:18:11 -0700

Creswick, Steven

Mon, 19 Mar 2007 06:21:24 -0400

Hernefjord Ingemar

Mon, 19 Mar 2007 12:06:25 +0100

Victor G. Hernandez

Mon, 19 Mar 2007 06:40:42 -0500

Hernefjord Ingemar

Mon, 19 Mar 2007 15:07:34 +0100

Victor G. Hernandez

Mon, 19 Mar 2007 09:39:42 -0500

Hernefjord Ingemar

Mon, 19 Mar 2007 16:40:25 +0100

Creswick, Steven

Mon, 19 Mar 2007 13:02:28 -0400

Victor G. Hernandez

Mon, 19 Mar 2007 12:47:13 -0500

Inge

Mon, 19 Mar 2007 18:59:34 +0100

arnaud grivon

Wed, 21 Mar 2007 12:35:32 +0100

Victor G. Hernandez

Wed, 21 Mar 2007 06:43:40 -0500

Joyce Koo

Wed, 21 Mar 2007 10:02:32 -0500

Creswick, Steven

Wed, 21 Mar 2007 10:13:19 -0400

Victor G. Hernandez

Wed, 21 Mar 2007 09:38:37 -0500

Inge

Wed, 21 Mar 2007 20:31:41 +0100

Werner Engelmaier

Wed, 21 Mar 2007 22:38:49 EDT

Hernefjord Ingemar

Thu, 22 Mar 2007 08:12:32 +0100

Hernefjord Ingemar

Thu, 22 Mar 2007 08:28:23 +0100

Hardness Characterization of a PCB Surface Finish

Leo Higgins

Thu, 22 Mar 2007 23:32:05 -0700

Good books to read?

West, Jim

Tue, 27 Mar 2007 14:12:10 -0400

Re: Good books to read?

Steve Gregory

Tue, 27 Mar 2007 13:25:18 -0500

Re: Good books to read?

Brian Ellis

Wed, 28 Mar 2007 13:08:34 +0300

arnaud grivon

Fri, 23 Mar 2007 11:18:59 +0100

Re: Hardness Characterization of a PCB Surface Finish

Colin McVean

Fri, 23 Mar 2007 10:42:32 -0000

Re: Hardness Characterization of a PCB Surface Finish

Jeffrey Bush

Fri, 23 Mar 2007 08:23:33 -0400

Re: Hardness Characterization of a PCB Surface Finish

Inge

Fri, 23 Mar 2007 19:51:18 +0100

HEAT SINKS

Dan Skweres

Tue, 20 Mar 2007 09:55:35 -0600

Dave Seymour

Tue, 20 Mar 2007 11:03:23 -0400

Dan Skweres

Tue, 20 Mar 2007 10:28:40 -0600

Hogg, Blair K.

Tue, 20 Mar 2007 13:48:57 -0400

Steve Gregory

Tue, 20 Mar 2007 13:10:56 -0500

Inge

Tue, 20 Mar 2007 19:25:11 +0100

Phil Nutting

Tue, 20 Mar 2007 14:32:40 -0400

Dan Skweres

Tue, 20 Mar 2007 13:40:15 -0600

Dan Skweres

Tue, 20 Mar 2007 13:42:02 -0600

Steve Gregory

Tue, 20 Mar 2007 13:45:16 -0500

I know it's not Friday but... NTC

Dan Skweres

Tue, 20 Mar 2007 13:50:12 -0600

high temp adhesive film

Phillip Bavaro

Fri, 30 Mar 2007 13:20:08 +0800

Joe Fjelstad

Thu, 15 Mar 2007 13:36:02 EDT

Re: I know it's not Friday but... NTC

Bill Kasprzak

Thu, 15 Mar 2007 13:52:36 -0400

Re: I know it's not Friday but... NTC

Chris Ball

Thu, 15 Mar 2007 14:14:31 -0500

I know it's not Friday but...close enough [NTC]

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Thu, 15 Mar 2007 14:54:05 EDT

Re: I know it's not Friday but...close enough [NTC]

Steve Gregory

Thu, 15 Mar 2007 14:20:56 -0500

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Thu, 15 Mar 2007 15:43:16 EDT

Re: I know it's not Friday but...close enough [NTC]

Inge

Thu, 15 Mar 2007 22:29:26 +0100

Re: I know it's not Friday but...close enough [NTC]

Genny Gibbard

Thu, 15 Mar 2007 16:23:06 -0600

Re: I know it's not Friday but...close enough [NTC]

stephengregory5849

Thu, 15 Mar 2007 17:49:53 -0500

Re: I know it's not Friday but...close enough [NTC]

Jeffrey Bush

Fri, 16 Mar 2007 08:12:01 -0400

Re: I know it's not Friday but...close enough [NTC]

Dehoyos, Ramon

Fri, 16 Mar 2007 10:25:02 -0400

Re: I know it's not Friday but...close enough [NTC]

Scott Decker

Fri, 16 Mar 2007 10:02:52 -0700

Re: I know it's not Friday but...close enough [NTC]

John Burke

Fri, 16 Mar 2007 10:31:41 -0700

Re: I know it's not Friday but...close enough [NTC]

Joe Russeau

Fri, 16 Mar 2007 13:37:38 -0600

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 13:45:58 EDT

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 13:48:32 EDT

Re: I know it's not Friday but...close enough [NTC]

Stadem, Richard D.

Fri, 16 Mar 2007 13:06:46 -0500

Re: I know it's not Friday but...close enough [NTC]

Bill Kasprzak

Fri, 16 Mar 2007 14:15:22 -0400

Re: I know it's not Friday but...close enough [NTC]

Inge

Fri, 16 Mar 2007 19:43:15 +0100

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 14:55:19 EDT

Re: I know it's not Friday but...close enough [NTC]

Inge

Fri, 16 Mar 2007 20:43:33 +0100

Re: I know it's not Friday but...close enough [NTC]

Werner Engelmaier

Fri, 16 Mar 2007 16:00:14 EDT

Re: I know it's not Friday but...close enough [NTC]

Hogg, Blair K.

Fri, 16 Mar 2007 16:39:05 -0400

immersion silver and exposed copper in small vias

Fran Juliot

Tue, 6 Mar 2007 09:57:56 -0600

Re: immersion silver and exposed copper in small vias

Alistair Murray

Tue, 6 Mar 2007 17:10:08 -0000

Re: immersion silver and exposed copper in small vias

Wayne Thayer

Tue, 6 Mar 2007 15:51:42 -0500

Re: immersion silver and exposed copper in small vias

Kevin Glidden

Tue, 6 Mar 2007 16:20:17 -0500

Re: immersion silver and exposed copper in small vias

Ian Hanna

Tue, 6 Mar 2007 16:26:11 -0500

Re: immersion silver and exposed copper in small vias

Steve Gregory

Tue, 6 Mar 2007 15:24:24 -0600

Re: immersion silver and exposed copper in small vias

Hogg, Blair K.

Tue, 6 Mar 2007 16:43:50 -0500

Re: immersion silver and exposed copper in small vias

Whittaker, Dewey (EHCOE)

Tue, 6 Mar 2007 15:34:16 -0700

Re: immersion silver and exposed copper in small vias

Jeffrey Bush

Tue, 6 Mar 2007 16:58:11 -0500

Re: immersion silver and exposed copper in small vias

Werner Engelmaier

Tue, 6 Mar 2007 19:05:19 EST

Re: immersion silver and exposed copper in small vias

Lee parker

Wed, 7 Mar 2007 09:40:52 -0500

Re: immersion silver and exposed copper in small vias

Barmuta, Michael

Wed, 7 Mar 2007 07:53:37 -0800

Re: immersion silver and exposed copper in small vias

Lee parker

Wed, 7 Mar 2007 11:01:36 -0500

Re: immersion silver and exposed copper in small vias

Whittaker, Dewey (EHCOE)

Wed, 7 Mar 2007 09:39:56 -0700

Re: immersion silver and exposed copper in small vias

Barmuta, Michael

Wed, 7 Mar 2007 09:30:30 -0800

Re: immersion silver and exposed copper in small vias

Whittaker, Dewey (EHCOE)

Wed, 7 Mar 2007 11:03:25 -0700

Re: immersion silver and exposed copper in small vias

Werner Engelmaier

Wed, 7 Mar 2007 13:43:51 EST

Re: immersion silver and exposed copper in small vias

John Burke

Wed, 7 Mar 2007 12:31:13 -0800

immersion silver and exposed copper in small vias NTC

Re: immersion silver and exposed copper in small vias NTC

Mike Fenner

Wed, 7 Mar 2007 11:57:19 -0000

immersion silver and exposed copper in small viasNTC

Re: immersion silver and exposed copper in small viasNTC

Stadem, Richard D.

Wed, 7 Mar 2007 14:47:45 -0600

Re: immersion silver and exposed copper in small viasNTC

John Burke

Wed, 7 Mar 2007 13:58:39 -0800

Re: immersion silver and exposed copper in small viasNTC

Bloomquist, Ken

Wed, 7 Mar 2007 14:41:31 -0800

IPC 6012 : Outgassing Criteria

Lum Wee Mei

Thu, 29 Mar 2007 11:17:26 +0800

Jeffrey Bush

Thu, 29 Mar 2007 10:59:47 -0400

Victor G. Hernandez

Thu, 29 Mar 2007 10:23:35 -0500

Hans Shin

Thu, 29 Mar 2007 08:35:56 -0700

Louis, Edwin @ CSE

Thu, 29 Mar 2007 12:01:52 -0400

Ian Hanna

Thu, 29 Mar 2007 12:42:52 -0400

Jeffrey Bush

Thu, 29 Mar 2007 15:34:58 -0400

IPC 6012 versus 6013

Steve Kelly

Mon, 5 Mar 2007 16:55:02 -0500

IPC ENIG SPECIFICATION

Wed, 14 Mar 2007 20:30:34 -0500

Wenger, George M.

Wed, 14 Mar 2007 22:26:18 -0400

Creswick, Steven

Thu, 15 Mar 2007 06:04:00 -0400

Thu, 15 Mar 2007 06:32:09 -0500

Werner Engelmaier

Thu, 15 Mar 2007 08:06:53 EDT

Joel Alexander

Thu, 15 Mar 2007 08:19:24 -0400

Bill Kasprzak

Thu, 15 Mar 2007 08:28:43 -0400

Thu, 15 Mar 2007 07:36:09 -0500

Joyce Koo

Thu, 15 Mar 2007 08:52:21 -0500

Werner Engelmaier

Thu, 15 Mar 2007 10:27:25 EDT

N Burtt

Thu, 15 Mar 2007 09:27:04 -0600

Werner Engelmaier

Thu, 15 Mar 2007 10:30:23 EDT

Barmuta, Michael

Thu, 15 Mar 2007 07:46:51 -0700

George Milad

Thu, 15 Mar 2007 10:53:00 EDT

Stadem, Richard D.

Thu, 15 Mar 2007 10:51:49 -0500

George Milad

Thu, 15 Mar 2007 12:04:44 EDT

Stadem, Richard D.

Thu, 15 Mar 2007 11:47:58 -0500

IPC International Conference on Lead Free Materials & Surface Finishes, May 8-9, 2007, in San Jose, CA

Jeffrey Bush

Thu, 15 Mar 2007 12:45:42 -0400

Tina Nerad

Mon, 19 Mar 2007 16:06:41 -0500

IPC Surface Finish Inspection - ENIG

Paymon Sani

Wed, 28 Mar 2007 16:59:00 -0400

IPC Workshop: Compliant Electronics for EU Applications on 3/13-14/07 in Dallas, TX

Tina Nerad

Thu, 8 Mar 2007 13:01:40 -0600

IPC's Design for Manufacture workshop on April 17, 2007 - Leeds, UK

Michelle Michelotti

Thu, 29 Mar 2007 09:57:38 -0500

IPC's Designing with your 'Thumbs' - May 21, 2007, Bannockburn, IL

Tina Nerad

Mon, 19 Mar 2007 10:42:11 -0500

IPC-4101/101 vs /121

Thomas A. Frayda

Tue, 6 Mar 2007 13:50:03 -0600

IPC/JEDEC Global Conference on Lead Free Reliability & Reliability Testing for RoHS Lead Free Electronics, April 10-12, 2007, in Boston, MA

Tina Nerad

Wed, 21 Mar 2007 10:40:24 -0500

IPC/JEDEC Global Conference on LF Reliability & Reliability Testing for RoHS LF Electronics - April 10-12, 2007 in Boston, MA

Tina Nerad

Mon, 5 Mar 2007 14:12:46 -0600

Join IPC's REACH Webcast Series April 11 & 18, 2007

Michelle Michelotti

Fri, 30 Mar 2007 08:38:04 -0500

Join IPC, in Singapore, for a series of workshops! Register today!

Michelle Michelotti

Mon, 26 Mar 2007 10:31:13 -0500

Laminate material selection

Marsico, James

Mon, 12 Mar 2007 08:31:01 -0400

Dwight Mattix

Mon, 12 Mar 2007 07:12:56 -0700

Whittaker, Dewey (EHCOE)

Mon, 12 Mar 2007 09:45:39 -0700

Phil Nutting

Mon, 12 Mar 2007 12:58:57 -0400

valerie St. Cyr

Mon, 12 Mar 2007 13:00:32 -0400

Jeffrey Bush

Mon, 12 Mar 2007 12:00:05 -0400

John Burke

Mon, 12 Mar 2007 10:05:49 -0700

Laminate Qualification.

Dave Seymour

Thu, 1 Mar 2007 14:26:14 -0500

Paul Reid

Thu, 1 Mar 2007 15:46:20 -0500

Steve Gregory

Thu, 1 Mar 2007 15:32:31 -0600

Tan, Geok Ang

Fri, 2 Mar 2007 08:34:12 +0800

Dave Seymour

Fri, 2 Mar 2007 10:26:43 -0500

Lead coating meniscus cracking

Stephen Pierce

Mon, 5 Mar 2007 13:23:27 -0800

West, Jim

Wed, 7 Mar 2007 10:12:50 -0500

Re: Lead coating meniscus cracking

Werner Engelmaier

Wed, 7 Mar 2007 10:16:32 EST

Re: Lead coating meniscus cracking

Bill Kasprzak

Wed, 7 Mar 2007 10:42:34 -0500

Re: Lead coating meniscus cracking

Whittaker, Dewey (EHCOE)

Wed, 7 Mar 2007 12:09:02 -0700

Lead-free Foxtor connector removal

Eric Castonguay

Thu, 22 Mar 2007 14:49:57 -0600

Legend Ink and ENIG

Ralph Richart

Mon, 26 Mar 2007 18:26:46 -0700

Re: Legend Ink and ENIG

Jeffrey Bush

Tue, 27 Mar 2007 07:28:03 -0400

Re: Legend Ink and ENIG

ZLATKO BIJEDIC

Wed, 28 Mar 2007 19:32:47 -0700

Metal-core PCBs

Grant Emandien

Fri, 16 Mar 2007 12:41:39 +0200

Re: Metal-core PCBs

Steve Gregory

Fri, 16 Mar 2007 09:00:13 -0500

Re: Metal-core PCBs

Hernefjord Ingemar

Mon, 19 Mar 2007 08:33:30 +0100

new roadmap

Joyce Koo

Fri, 9 Mar 2007 10:19:33 -0500

NiAu Specification for Al Wedge Wire Bonding

arnaud grivon

Wed, 14 Mar 2007 16:01:28 +0100

Hernefjord Ingemar

Wed, 14 Mar 2007 16:45:22 +0100

arnaud grivon

Thu, 15 Mar 2007 14:50:53 +0100

Joyce Koo

Thu, 15 Mar 2007 10:07:19 -0500

Hernefjord Ingemar

Thu, 15 Mar 2007 15:56:48 +0100

Nickel Foot

Paymon Sani

Tue, 20 Mar 2007 12:22:31 -0400

R Sedlak

Tue, 20 Mar 2007 10:30:51 -0700

Dennis Fritz

Tue, 20 Mar 2007 13:31:37 EDT

Tony Steinke

Tue, 20 Mar 2007 16:23:39 -0500

Jeffrey Bush

Wed, 21 Mar 2007 07:51:54 -0400

Paymon Sani

Wed, 21 Mar 2007 11:59:45 -0400

Brian Ellis

Wed, 21 Mar 2007 18:12:53 +0200

NTC Alternative lead free soldering reviewed

Werner Engelmaier

Wed, 21 Mar 2007 22:15:26 EDT

John Burke

Sat, 31 Mar 2007 18:13:26 -0700

NTC: Anrufen: Trikeman

Inge

Fri, 16 Mar 2007 21:26:39 +0100

NTC: Double Posting

ekalgren

Wed, 21 Mar 2007 12:51:21 -0400

Re: NTC: Double Posting

Randy Bock Sr.

Wed, 21 Mar 2007 12:52:34 -0400

Re: NTC: Double Posting

Stadem, Richard D.

Wed, 21 Mar 2007 12:29:00 -0500

NTC: The Silicon Zoo

Sun, 25 Mar 2007 23:34:36 EDT

Number of allowed X-outs?

Re: Number of allowed X-outs?

Sherif Refaat

Fri, 2 Mar 2007 10:23:57 -0500

Re: Number of allowed X-outs?

Stadem, Richard D.

Fri, 2 Mar 2007 09:47:09 -0600

number topics?

Edward Mines

Thu, 29 Mar 2007 06:46:20 -0700

Re: number topics?

Dehoyos, Ramon

Thu, 29 Mar 2007 09:51:58 -0400

Pad damage

West, Jim

Tue, 20 Mar 2007 10:07:04 -0400

Jones, Evamaria

Tue, 20 Mar 2007 10:10:33 -0400

Garry Foskett

Tue, 20 Mar 2007 14:23:49 -0000

Stadem, Richard D.

Tue, 20 Mar 2007 09:31:10 -0500

Fran Juliot

Tue, 20 Mar 2007 09:50:07 -0500

Brooks,Bill

Tue, 20 Mar 2007 10:12:27 -0800

Bill Kasprzak

Tue, 20 Mar 2007 14:13:45 -0400

Inge

Tue, 20 Mar 2007 19:16:35 +0100

Re: Panel tab breakoff burrs

Jeffrey Bush

Wed, 21 Mar 2007 07:50:08 -0400

Panel tab breakoff burrs

Phillip Bavaro

Wed, 21 Mar 2007 01:01:07 +0800

Nowland, Russell Howard (Russell)

Tue, 20 Mar 2007 12:35:52 -0500

Paste Volume, off contact vs non off contact

Matt Kehoe

Fri, 9 Mar 2007 11:00:46 -0600

Bill Coleman

Fri, 9 Mar 2007 10:50:39 -0700

Bill Kunkle

Fri, 9 Mar 2007 13:11:13 -0500

Guy Ramsey

Fri, 9 Mar 2007 15:39:04 -0500

Ryan Grant

Fri, 9 Mar 2007 15:14:07 -0700

BADRI

Sat, 10 Mar 2007 08:51:22 +0530

Matt Kehoe-SIPAD Systems

Mon, 12 Mar 2007 08:52:11 -0400

Matt Kehoe-SIPAD Systems

Mon, 12 Mar 2007 08:56:54 -0400

Matt Kehoe-SIPAD Systems

Mon, 12 Mar 2007 08:50:23 -0400

PCB Cleanliness/Soft Water

Wayne Thayer

Mon, 12 Mar 2007 15:49:46 -0400

PCB Cleanliness

Chafin, Ken G.

Wed, 28 Mar 2007 17:12:52 -0400

Re: PCB Cleanliness

R Sedlak

Wed, 28 Mar 2007 14:53:53 -0700

Re: PCB Cleanliness

Brian Ellis

Thu, 29 Mar 2007 11:09:30 +0300

Re: PCB Cleanliness/Soft Water

R Sedlak

Thu, 29 Mar 2007 05:28:02 -0700

PCB laminate and immersion silver

N Burtt

Thu, 15 Mar 2007 11:39:55 -0600

Re: PCB laminate and immersion silver

Jeffrey Bush

Thu, 15 Mar 2007 12:48:25 -0400

PCB PACKAGING MATERIAL & Baking Question

Scott Lefebvre

Mon, 26 Mar 2007 11:58:20 -0700

Re: PCB PACKAGING MATERIAL & Baking Question

Richard Kraszewski

Mon, 26 Mar 2007 14:00:05 -0500

Re: PCB PACKAGING MATERIAL & Baking Question

Werner Engelmaier

Tue, 27 Mar 2007 07:33:25 EDT

Re: PCB PACKAGING MATERIAL & Baking Question

Stadem, Richard D.

Tue, 27 Mar 2007 06:43:10 -0500

PCB plating Qualification

Kane, Amol (349)

Tue, 13 Mar 2007 07:18:07 -0400

Werner Engelmaier

Tue, 13 Mar 2007 10:27:10 EDT

Barmuta, Michael

Tue, 13 Mar 2007 08:01:14 -0700

Kane, Amol (349)

Tue, 13 Mar 2007 12:03:42 -0400

Werner Engelmaier

Tue, 13 Mar 2007 12:23:44 EDT

Eric CHRISTISON

Tue, 13 Mar 2007 16:27:09 +0000

Barmuta, Michael

Tue, 13 Mar 2007 10:13:12 -0700

Re: Polymer Core BGA Balls

Dehoyos, Ramon

Fri, 16 Mar 2007 10:57:20 -0400

PCB Temp Guidelines

Upton, Shawn

Fri, 23 Mar 2007 10:10:48 -0400

Re: PCB Temp Guidelines

Joyce Koo

Fri, 23 Mar 2007 10:23:20 -0500

Re: PCB Temp Guidelines

Jeffrey Bush

Fri, 23 Mar 2007 13:31:47 -0400

Polymer Core BGA Balls

Werner Engelmaier

Wed, 7 Mar 2007 09:50:25 EST

Kerry McMullen

Wed, 7 Mar 2007 10:11:17 -0500

Post Assembly Bow and Twist

McGlaughlin, Jeffrey A

Thu, 8 Mar 2007 07:04:50 -0500

Kevin Glidden

Thu, 8 Mar 2007 08:36:05 -0500

Guy Ramsey

Thu, 8 Mar 2007 09:07:46 -0500

Whittaker, Dewey (EHCOE)

Thu, 8 Mar 2007 07:11:27 -0700

McGlaughlin, Jeffrey A

Thu, 8 Mar 2007 09:12:38 -0500

Werner Engelmaier

Thu, 8 Mar 2007 09:26:20 EST

Scott Decker

Thu, 8 Mar 2007 08:24:12 -0700

Re: Prediction comes true

Smith, Richard

Thu, 8 Mar 2007 13:52:32 -0500

Prediction comes true

Stadem, Richard D.

Thu, 1 Mar 2007 07:06:00 -0600

Prediction comes true (NTC)

Dehoyos, Ramon

Thu, 1 Mar 2007 10:12:34 -0500

Mike Fenner

Thu, 1 Mar 2007 18:29:59 -0000

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 11:33:16 -0700

Stadem, Richard D.

Thu, 1 Mar 2007 12:59:34 -0600

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 12:13:35 -0700

Joe Fjelstad

Thu, 1 Mar 2007 19:33:15 EST

Qualification Testing for H1 Flux

Whittaker, Dewey (EHCOE)

Fri, 2 Mar 2007 06:52:28 -0700

Press-fit Soldering

Bob Barr

Mon, 26 Mar 2007 10:07:23 -0600

Re: Press-fit Soldering

Stadem, Richard D.

Mon, 26 Mar 2007 10:33:08 -0500

Re: Press-fit Soldering

Wayne Thayer

Mon, 26 Mar 2007 12:30:27 -0400

Paul Baine

Fri, 9 Mar 2007 13:17:28 -0500

Re: Qualification Testing for H1 Flux

Whittaker, Dewey (EHCOE)

Fri, 9 Mar 2007 11:56:57 -0700

Re: Qualification Testing for H1 Flux

Bill Kasprzak

Sat, 10 Mar 2007 07:47:17 -0500

REACH Webcast Series - April 11 & 18, 2007

Tina Nerad

Wed, 21 Mar 2007 16:00:19 -0500

Reflow Solder fixtures

McGlaughlin, Jeffrey A

Wed, 21 Mar 2007 13:13:20 -0400

Steve Gregory

Wed, 21 Mar 2007 12:23:50 -0500

Stadem, Richard D.

Wed, 21 Mar 2007 12:33:52 -0500

Stadem, Richard D.

Wed, 21 Mar 2007 12:33:30 -0500

Matt Kehoe-SIPAD Systems

Wed, 21 Mar 2007 13:52:22 -0400

Stephen Pence

Wed, 21 Mar 2007 14:02:37 -0400

Wed, 21 Mar 2007 14:40:37 EDT

Phillip Bavaro

Thu, 22 Mar 2007 03:31:57 -0700

Wed, 21 Mar 2007 19:04:12 EDT

Scott Lefebvre

Thu, 22 Mar 2007 10:51:28 -0700

Remember to Register for IPC's workshops on April 17 & 18, 2007!

Ells Berkowitz

Fri, 30 Mar 2007 14:03:14 -0600

Michelle Michelotti

Thu, 1 Mar 2007 11:29:50 -0600

Michelle Michelotti

Fri, 2 Mar 2007 09:45:44 -0600

Alexandra Curtis

Fri, 30 Mar 2007 09:52:17 -0500

Michelle Michelotti

Tue, 27 Mar 2007 09:10:34 -0500

Renewed respect for copper (non-technical content)

Craig Cullum

Thu, 1 Mar 2007 16:05:40 -0600

Re: Renewed respect for copper (non-technical content)

John Burke

Thu, 1 Mar 2007 14:41:42 -0800

Re: Renewed respect for copper (non-technical content)

Creswick, Steven

Fri, 2 Mar 2007 05:54:25 -0500

Re: Renewed respect for copper (non-technical content)

Fri, 2 Mar 2007 07:27:26 -0500

Rigid flex PCB manufacturer

Ted Kong

Wed, 21 Mar 2007 14:01:01 -0700

Re: Rigid flex PCB manufacturer

Thu, 22 Mar 2007 11:17:50 -0400

Rigid Flex routing

mp3

Sun, 25 Mar 2007 19:18:05 +0530

Re: Rigid Flex routing

mp3

Mon, 26 Mar 2007 18:27:20 +0530

Re: Rigid Flex routing

Joe Fjelstad

Thu, 29 Mar 2007 13:38:23 EDT

ROHS lead free question

David Harman

Thu, 22 Mar 2007 17:04:03 -0700

Mike Fenner

Fri, 23 Mar 2007 12:23:03 -0000

Genny Gibbard

Fri, 23 Mar 2007 08:56:44 -0600

Inge

Fri, 23 Mar 2007 19:53:25 +0100

Mike Fenner

Fri, 23 Mar 2007 22:08:15 -0000

Joe Fjelstad

Fri, 23 Mar 2007 21:49:25 EDT

ROHS lead free question (NTC)

Mike Fenner

Thu, 29 Mar 2007 09:23:47 +0100

Re: ROHS lead free question (NTC)

Colin McVean

Thu, 29 Mar 2007 09:31:18 +0100

Re: ROHS lead free question (NTC)

Upton, Shawn

Thu, 29 Mar 2007 07:59:44 -0400

Seam resistance pulse welding

Hernefjord Ingemar

Tue, 13 Mar 2007 15:08:04 +0100

Re: Seam resistance pulse welding

Creswick, Steven

Tue, 13 Mar 2007 12:37:33 -0400

Re: Seam resistance pulse welding

Fox, Ian

Thu, 15 Mar 2007 11:21:58 -0000

Seeking PCB proto manufacturers

Roland Jaquet

Wed, 7 Mar 2007 09:42:59 +0100

Re: Seeking PCB proto manufacturers

Dennis Fritz

Wed, 7 Mar 2007 08:11:41 EST

Re: Seeking PCB proto manufacturers

Roland Jaquet

Wed, 7 Mar 2007 15:57:15 +0100

Small volume quick turn custom cable supplier

James Verrette

Thu, 15 Mar 2007 16:18:57 -0400

SMT Solder Joint Strength

Gregg A. Owens

Fri, 16 Mar 2007 11:05:25 -0700

Bev Christian

Fri, 16 Mar 2007 14:26:40 -0400

Werner Engelmaier

Fri, 16 Mar 2007 14:53:40 EDT

Gregg A. Owens

Fri, 16 Mar 2007 11:58:30 -0700

Werner Engelmaier

Fri, 16 Mar 2007 15:04:01 EDT

Reuven Rokah

Fri, 16 Mar 2007 21:21:16 +0200

Werner Engelmaier

Fri, 16 Mar 2007 15:25:22 EDT

Werner Engelmaier

Fri, 16 Mar 2007 15:28:45 EDT

Reuven Rokah

Fri, 16 Mar 2007 21:43:43 +0200

Werner Engelmaier

Fri, 16 Mar 2007 16:04:05 EDT

Reuven Rokah

Fri, 16 Mar 2007 22:17:38 +0200

Stadem, Richard D.

Fri, 16 Mar 2007 15:37:01 -0500

Stadem, Richard D.

Fri, 16 Mar 2007 15:39:01 -0500

Werner Engelmaier

Fri, 16 Mar 2007 16:50:30 EDT

Stadem, Richard D.

Fri, 16 Mar 2007 16:02:03 -0500

Clayton @ Reliability Resources

Fri, 16 Mar 2007 13:56:14 -0700

al shirazi

Fri, 16 Mar 2007 14:11:39 -0700

Werner Engelmaier

Fri, 16 Mar 2007 17:31:12 EDT

Werner Engelmaier

Fri, 16 Mar 2007 17:34:26 EDT

Werner Engelmaier

Fri, 16 Mar 2007 17:37:41 EDT

al shirazi

Fri, 16 Mar 2007 14:40:07 -0700

Werner Engelmaier

Fri, 16 Mar 2007 17:57:51 EDT

al shirazi

Fri, 16 Mar 2007 15:03:20 -0700

Hernefjord Ingemar

Mon, 19 Mar 2007 10:40:22 +0100

Solder Purity

Tue, 6 Mar 2007 08:21:54 -0500

Solder Purity

Thu, 15 Mar 2007 08:39:32 -0400

Guy Ramsey

Thu, 15 Mar 2007 08:55:08 -0400

Dehoyos, Ramon

Thu, 15 Mar 2007 09:03:14 -0400

Mike Fenner

Thu, 15 Mar 2007 18:17:13 -0000

Solder Resist Encroachment onto BGA pads

Jack Crawford

Thu, 15 Mar 2007 16:58:20 -0500

Paymon Sani

Fri, 30 Mar 2007 12:02:13 -0400

Stadem, Richard D.

Fri, 30 Mar 2007 11:15:47 -0500

Ian Hanna

Fri, 30 Mar 2007 11:26:11 -0500

Genny Gibbard

Fri, 30 Mar 2007 10:26:18 -0600

Ian Hanna

Fri, 30 Mar 2007 12:37:30 -0400

John Burke

Fri, 30 Mar 2007 09:44:32 -0700

Paymon Sani

Fri, 30 Mar 2007 13:15:26 -0400

Steve Gregory

Fri, 30 Mar 2007 12:50:47 -0500

John Burke

Fri, 30 Mar 2007 10:53:55 -0700

Jeffrey Bush

Fri, 30 Mar 2007 13:45:23 -0400

Ian Hanna

Fri, 30 Mar 2007 14:05:27 -0500

Victor G. Hernandez

Fri, 30 Mar 2007 14:17:55 -0500

Paymon Sani

Fri, 30 Mar 2007 15:23:32 -0400

Steve Gregory

Fri, 30 Mar 2007 15:11:22 -0500

Jeffrey Bush

Fri, 30 Mar 2007 17:19:32 -0400

Werner Engelmaier

Fri, 30 Mar 2007 19:23:16 EDT

Werner Engelmaier

Fri, 30 Mar 2007 19:25:09 EDT

Paymon Sani

Fri, 30 Mar 2007 22:36:48 -0400

Solderability problems on through holes only.

Werner Engelmaier

Fri, 30 Mar 2007 22:58:10 EDT

Peter Wong

Wed, 21 Mar 2007 13:17:55 -0700

Ian Hanna

Wed, 21 Mar 2007 15:26:08 -0500

R Sedlak

Wed, 21 Mar 2007 13:28:47 -0700

Stadem, Richard D.

Wed, 21 Mar 2007 15:40:15 -0500

Paymon Sani

Wed, 21 Mar 2007 17:01:52 -0400

Wenger, George M.

Wed, 21 Mar 2007 17:14:56 -0400

Miguel Vallejo

Wed, 21 Mar 2007 14:21:13 -0700

Stadem, Richard D.

Wed, 21 Mar 2007 16:25:15 -0500

Peter Wong

Wed, 21 Mar 2007 14:48:25 -0700

Werner Engelmaier

Wed, 21 Mar 2007 22:44:49 EDT

Tempea, Ioan

Thu, 22 Mar 2007 07:49:08 -0400

Paymon Sani

Thu, 22 Mar 2007 09:32:21 -0400

John Burke

Thu, 22 Mar 2007 08:49:31 -0700

Stadem, Richard D.

Thu, 22 Mar 2007 11:04:43 -0500

Werner Engelmaier

Fri, 23 Mar 2007 08:43:03 EDT

Werner Engelmaier

Fri, 23 Mar 2007 17:36:27 EDT

Werner Engelmaier

Fri, 23 Mar 2007 17:39:49 EDT

Paymon Sani

Sat, 24 Mar 2007 08:49:51 -0400

Soldering to Beryillum Copper

David D. Hillman

Sat, 24 Mar 2007 11:43:09 -0500

Kane, Amol (349)

Wed, 28 Mar 2007 10:58:51 -0400

Barmuta, Michael

Wed, 28 Mar 2007 08:29:03 -0700

Kane, Amol (349)

Wed, 28 Mar 2007 11:36:16 -0400

Tempea, Ioan

Wed, 28 Mar 2007 11:40:17 -0400

Kane, Amol (349)

Wed, 28 Mar 2007 12:04:41 -0400

Creswick, Steven

Wed, 28 Mar 2007 12:08:55 -0400

Kane, Amol (349)

Wed, 28 Mar 2007 12:16:36 -0400

Creswick, Steven

Wed, 28 Mar 2007 12:24:33 -0400

Kane, Amol (349)

Wed, 28 Mar 2007 12:36:54 -0400

John Burke

Wed, 28 Mar 2007 09:46:51 -0700

Werner Engelmaier

Wed, 28 Mar 2007 13:09:20 EDT

Werner Engelmaier

Wed, 28 Mar 2007 13:15:23 EDT

Kane, Amol (349)

Wed, 28 Mar 2007 13:22:53 -0400

Whittaker, Dewey (EHCOE)

Wed, 28 Mar 2007 11:45:49 -0700

John Burke

Wed, 28 Mar 2007 11:53:50 -0700

Ian Hanna

Wed, 28 Mar 2007 15:04:10 -0400

Whittaker, Dewey (EHCOE)

Wed, 28 Mar 2007 12:19:01 -0700

John Burke

Wed, 28 Mar 2007 13:52:56 -0700

Hernefjord Ingemar

Thu, 29 Mar 2007 07:52:11 +0200

Kane, Amol (349)

Thu, 29 Mar 2007 07:07:21 -0400

Creswick, Steven

Thu, 29 Mar 2007 07:09:51 -0400

Soldering using Sn96

Marsico, James

Fri, 30 Mar 2007 07:46:19 -0400

Steve Gregory

Fri, 30 Mar 2007 06:58:12 -0500

Donald Kyle

Fri, 30 Mar 2007 07:12:10 -0500

Marsico, James

Fri, 30 Mar 2007 08:20:52 -0400

David D. Hillman

Fri, 30 Mar 2007 07:25:21 -0500

Wenger, George M.

Fri, 30 Mar 2007 08:39:09 -0400

Christopher Nash

Fri, 30 Mar 2007 08:43:23 -0400

Whittaker, Dewey (EHCOE)

Fri, 30 Mar 2007 08:14:12 -0700

Mike Fenner

Fri, 30 Mar 2007 17:40:16 +0100

Werner Engelmaier

Fri, 30 Mar 2007 18:41:42 EDT

Soldermask Blisters

Ralph Richart

Mon, 19 Mar 2007 08:58:06 -0700

Barmuta, Michael

Mon, 19 Mar 2007 10:06:20 -0700

Dehoyos, Ramon

Mon, 19 Mar 2007 13:12:50 -0400

Steve Gregory

Mon, 19 Mar 2007 14:43:37 -0500

Brian Ellis

Tue, 20 Mar 2007 10:40:55 +0200

Fri, 23 Mar 2007 19:23:27 EDT

Surface finish inspection

Whittaker, Dewey (EHCOE)

Mon, 26 Mar 2007 07:25:52 -0700

structural adhesive

Marsico, James

Thu, 22 Mar 2007 14:25:45 -0400

Re: structural adhesive

Creswick, Steven

Thu, 22 Mar 2007 14:40:51 -0400

Re: structural adhesive

Creswick, Steven

Thu, 22 Mar 2007 15:04:00 -0400

Re: structural adhesive

Inge

Thu, 22 Mar 2007 22:01:11 +0100

Paymon Sani

Thu, 29 Mar 2007 13:13:40 -0400

SV: [TN] Cofired gold

Hfjord

Thu, 29 Mar 2007 18:33:39 +0200

SV: [TN] Cofired gold

Hfjord

Fri, 30 Mar 2007 21:27:58 +0200

SV: [TN] Cofired gold

Hfjord

Fri, 30 Mar 2007 21:48:23 +0200

Re: SV: [TN] Cofired gold

Wayne Thayer

Fri, 30 Mar 2007 16:10:51 -0400

SV: [TN] Component Orientation Survey

Inge

Thu, 1 Mar 2007 18:30:55 +0100

Re: SV: [TN] Component Orientation Survey

Joyce Koo

Thu, 1 Mar 2007 12:59:38 -0500

SV: [TN] Good books to read?

Hfjord

Thu, 29 Mar 2007 18:37:37 +0200

SV: [TN] Prediction comes true (NTC)

Inge

Thu, 1 Mar 2007 19:48:01 +0100

SV: [TN] Prediction comes true (NTC)

Inge

Thu, 1 Mar 2007 20:05:19 +0100

SV: [TN] Prediction comes true (NTC)

Inge

Thu, 1 Mar 2007 22:08:12 +0100

Guy Ramsey

Thu, 1 Mar 2007 16:24:13 -0500

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 14:33:26 -0700

John Burke

Thu, 1 Mar 2007 13:42:15 -0800

Whittaker, Dewey (EHCOE)

Thu, 1 Mar 2007 14:53:35 -0700

John Burke

Thu, 1 Mar 2007 14:39:09 -0800

Whittaker, Dewey (EHCOE)

Fri, 2 Mar 2007 06:43:32 -0700

SV: [TN] ROHS lead free question (NTC)

Joe Fjelstad

Fri, 2 Mar 2007 14:34:07 EST

Hfjord

Sat, 31 Mar 2007 10:42:53 +0200

SV: [TN] SV: [TN] Cofired gold

Hfjord

Sat, 31 Mar 2007 11:25:54 +0200

SV: [TN] SV: [TN] Prediction comes true (NTC)

Inge

Thu, 1 Mar 2007 23:11:23 +0100

T260 tests

Dave Seymour

Fri, 23 Mar 2007 10:19:29 -0400

Lee parker

Fri, 23 Mar 2007 11:21:26 -0400

Werner Engelmaier

Fri, 23 Mar 2007 17:52:10 EDT

Louis, Edwin @ CSE

Thu, 29 Mar 2007 15:27:58 -0400

Toolings and Fixture checklist required

Werner Engelmaier

Thu, 29 Mar 2007 18:15:53 EDT

TEST

Dan Skweres

Fri, 9 Mar 2007 16:57:47 -0600

Thick BT board Suppliers

Rolfe, David

Tue, 27 Mar 2007 13:41:41 -0400

pras chop

Fri, 2 Mar 2007 06:46:41 +0000

Toolings and Fixture checklist required --- (URGENT)

pras chop

Mon, 5 Mar 2007 06:42:57 +0000

Re: Toolings and Fixture checklist required --- (URGENT)

Steve Gregory

Mon, 5 Mar 2007 06:57:57 -0600

unsubscribe

Jeffrey Bush

Fri, 30 Mar 2007 17:21:30 -0400

Re: unsubscribe

stephengregory5849

Fri, 30 Mar 2007 18:27:03 -0500

Use of Type AR Conformal Coating for Military PCBs

- Bogert

Fri, 2 Mar 2007 05:55:07 -0500

Re: Use of Type AR Conformal Coating for Military PCBs

Douglas O. Pauls

Mon, 5 Mar 2007 07:36:28 -0600

Re: Use of Type AR Conformal Coating for Military PCBs

Hernefjord Ingemar

Mon, 5 Mar 2007 14:50:33 +0100

Re: Use of Type AR Conformal Coating for Military PCBs

Dehoyos, Ramon

Mon, 5 Mar 2007 09:14:48 -0500

Re: Use of Type AR Conformal Coating for Military PCBs

Douglas O. Pauls

Mon, 5 Mar 2007 08:18:18 -0600

Re: Use of Type AR Conformal Coating for Military PCBs

Dehoyos, Ramon

Mon, 5 Mar 2007 09:25:26 -0500

Re: Use of Type AR Conformal Coating for Military PCBs

Douglas O. Pauls

Mon, 5 Mar 2007 08:43:55 -0600

Re: Use of Type AR Conformal Coating for Military PCBs

Phil Kinner

Mon, 5 Mar 2007 15:39:37 -0000

UV Bump

John Parsons

Fri, 30 Mar 2007 13:12:38 -0700

Kathy Kuhlow

Fri, 30 Mar 2007 15:45:27 -0500

John Parsons

Fri, 30 Mar 2007 13:50:54 -0700

Barmuta, Michael

Fri, 30 Mar 2007 14:02:57 -0700

Via aspect ratio in mixed dielectric PCB's

Phil Kinner

Fri, 30 Mar 2007 22:10:19 +0100

Pasquito, Helena

Wed, 28 Mar 2007 14:38:24 -0400

Werner Engelmaier

Wed, 28 Mar 2007 16:59:48 EDT

Pasquito, Helena

Thu, 29 Mar 2007 10:11:07 -0400

Stadem, Richard D.

Thu, 29 Mar 2007 09:22:10 -0500

Werner Engelmaier

Thu, 29 Mar 2007 10:23:49 EDT

Ian Hanna

Thu, 29 Mar 2007 09:37:03 -0500

Werner Engelmaier

Thu, 29 Mar 2007 10:33:52 EDT

Whisker contamination is solder pot

Jeffrey Bush

Thu, 29 Mar 2007 10:51:23 -0400

Via in Pad question

Re: Via in Pad question

Ryan Grant

Fri, 2 Mar 2007 15:17:59 -0700

Re: Via in Pad question

Stadem, Richard D.

Sat, 3 Mar 2007 06:38:12 -0600

Weather coating

Mark Eckert

Sun, 25 Mar 2007 21:24:10 -0600

Re: Weather coating

David Douthit

Sun, 25 Mar 2007 20:57:34 -0700

weather coatings

Edward Mines

Tue, 27 Mar 2007 10:00:57 -0700

Re: weather coatings

Joyce Koo

Tue, 27 Mar 2007 13:30:03 -0500

Re: weather coatings

Mark Eckert

Thu, 29 Mar 2007 22:58:23 -0600

Jack Evans

Wed, 21 Mar 2007 09:57:21 -0600

Dehoyos, Ramon

Wed, 21 Mar 2007 11:54:34 -0400

Barmuta, Michael

Wed, 21 Mar 2007 08:58:44 -0700

Jack Evans

Wed, 21 Mar 2007 13:04:14 -0600

Ian Hanna

Wed, 21 Mar 2007 14:14:50 -0400

Phil Nutting

Wed, 21 Mar 2007 15:00:08 -0400

Evans, Jack

Wed, 21 Mar 2007 13:57:04 -0700

Barmuta, Michael

Wed, 21 Mar 2007 15:13:36 -0700

whodunit?

Graham Collins

Fri, 9 Mar 2007 10:39:37 -0500

Roger Stoops

Fri, 9 Mar 2007 10:44:09 -0500

Graham Collins

Fri, 9 Mar 2007 11:12:26 -0500

Dan Skweres

Fri, 9 Mar 2007 10:15:56 -0600

Colin McVean

Fri, 9 Mar 2007 16:13:53 -0000

Jim Henderson

Fri, 9 Mar 2007 11:47:00 -0500

Steve Gregory

Fri, 9 Mar 2007 10:48:11 -0600

Werner Engelmaier

Fri, 9 Mar 2007 11:55:00 EST

Kerry McMullen

Fri, 9 Mar 2007 12:17:07 -0500

Kolmodin, Todd

Fri, 9 Mar 2007 12:27:09 -0500

Dehoyos, Ramon

Fri, 9 Mar 2007 12:35:10 -0500

John Burke

Fri, 9 Mar 2007 09:41:04 -0800

Joe Fjelstad

Fri, 9 Mar 2007 12:53:48 EST

Jeffrey Bush

Fri, 9 Mar 2007 12:18:27 -0500

Graham Collins

Fri, 9 Mar 2007 14:00:23 -0500

Graham Collins

Fri, 9 Mar 2007 14:08:55 -0500

Inge

Sat, 10 Mar 2007 19:29:36 +0100

Whittaker, Dewey (EHCOE)

Mon, 12 Mar 2007 08:06:22 -0700

Graham Collins

Mon, 12 Mar 2007 11:14:10 -0400

Whittaker, Dewey (EHCOE)

Mon, 12 Mar 2007 09:55:03 -0700

Douglas O. Pauls

Mon, 12 Mar 2007 12:06:00 -0500

[LF] Polymer Core BGA Balls

Werner Engelmaier

Mon, 12 Mar 2007 13:16:17 EDT

Joe Fjelstad

Wed, 7 Mar 2007 13:31:28 EST

Werner Engelmaier

Wed, 7 Mar 2007 13:49:25 EST

Joe Fjelstad

Wed, 7 Mar 2007 15:02:18 EST

Werner Engelmaier

Wed, 7 Mar 2007 15:06:12 EST

Werner Engelmaier

Wed, 7 Mar 2007 20:11:20 EST

Newland, Scott

Fri, 9 Mar 2007 07:59:38 -0500

Ryan Grant

Fri, 9 Mar 2007 15:21:06 -0700