TECHNET Archives

July 2004

TechNet@IPC.ORG

Options: Hide Table of Contents

"Build Your Knowledge, Expertise and Industry Network" at IPCWorks 2004 (1 Message)
1oz Copper vs. .5 oz Copper (12 Messages)
7628 prepreg? (19 Messages)
AA Adaptor (10 Messages)
Allowable solder balls on a component? (3 Messages)
Antw: [TN] whatever happened (1 Message)
AOI standard (2 Messages)
Attention Designers: Albuquerque, NM (1 Message)
Bellcore / Telecordia (1 Message)
BGA Land Patterns (6 Messages)
BGA pad missmatch (4 Messages)
Board depanelizing - scored boards (2 Messages)
Board Stack geometry (11 Messages)
BTU TRS21 Parts (2 Messages)
Class 1,2 (4 Messages)
cleaning solvent (10 Messages)
Cleanliness of PCB (4 Messages)
conductive via fill drill drawing note (5 Messages)
conformal coating on SMD (3 Messages)
Cost of off shore (Bare board) (11 Messages)
Cost of Rework: Rework Cost Calculator Reference (1 Message)
Death by Lethal Customer (10 Messages)
Death by Lethal Customer, 2nd thought (1 Message)
Design and Process Implementation for Embedded Passives (1 Message)
Design for Manufacture at Tektronix - Last Chance to Register (1 Message)
Designers Learning Symposium in Europe! (1 Message)
Desktop AOI (1 Message)
Direct die attach to heat sink technology (1 Message)
Dry Film (11 Messages)
electroetch and cleaner (1 Message)
Embedded Passives Technology Workshop - Register Today (1 Message)
ESD Footwear Recommendation Wanted (8 Messages)
ESD Training (4 Messages)
Failure Reporting (9 Messages)
Feeder question (2 Messages)
Fillet formation on CR-range Cerled diodes (1 Message)
Glue on PCB (2 Messages)
Gold Embrittlement (1 Message)
Haywire vs. jumper wires (1 Message)
Haywire vs. jumper wries (9 Messages)
How to remove silk screen from the pad (1 Message)
Inspection outline (2 Messages)
IPC 356 (3 Messages)
IPC Webcast - The Chemistry of Garbage and Lead (2 Messages)
JBC Soldering Comparison (1 Message)
Karen Walters/USA/Skyworks is out of the office. (1 Message)
Lead Free (7 Messages)
Lead Free Transition (2 Messages)
Leadfree transition plan (2 Messages)
Long Reflow Soak Times for BGAs? (4 Messages)
LPI soldermasks (8 Messages)
Make Your Travel Plans and Register TODAY! (1 Message)
Max. Torque applied to a screw securing a PCB (4 Messages)
My solderball saga... (7 Messages)
Mydata Info (5 Messages)
New Mexico & area Designers (1 Message)
NTC - RE: [TN] Death by Lethal Customer (3 Messages)
NTC RE: [TN] Soldermask on PTH pad??? (1 Message)
Out Of The Office (1 Message)
Paul Lapointe/Kan/Mitel is no longer emploied at Mitel (1 Message)
Paul Lapointe/Kan/Mitel is no longer employed at Mitel (1 Message)
Pin Size vs. Plated Through Hole Size (8 Messages)
press fit connectors (4 Messages)
PWB SOLDERABILITY (7 Messages)
Quality Net? (5 Messages)
Question about panelization (7 Messages)
RE : [TN] SN63 (10 Messages)
Reballing an LTCC component (1 Message)
reflow oven question (2 Messages)
Reflowing leadfree CSP (4 Messages)
Removal of non functional pads (13 Messages)
Repackaging of active power device on heat sink (1 Message)
Replacement Parts for old Quad printer? (3 Messages)
Rework Costs (2 Messages)
Rjection of PCBs because of BGAs number replacements (2 Messages)
RMA's (4 Messages)
Sign off (1 Message)
Simple, basic axial from and trim machine... (6 Messages)
SMT Components (4 Messages)
SN63 (5 Messages)
SNEC Mtg (1 Message)
Solder Balls (2 Messages)
Solder Bridging on a Thru-hole connector (8 Messages)
solder mask (2 Messages)
Soldermask on PTH pad??? (1 Message)
Solvent name & Mfg. (2 Messages)
Sparying Flexible ink (1 Message)
Specifying PWB Finishes (5 Messages)
Steve Vargas/Sippican is out of the office. (1 Message)
Suggestions for removing solder balls from wave (2 Messages)
Technical resources (1 Message)
Tin Whisker Mitigation (1 Message)
Tin Whiskers (6 Messages)
tin-plated brass solderability (1 Message)
Toe-down configuration for gull wing leads (7 Messages)
Via Spacing (4 Messages)
whatever happened (3 Messages)
[NT] À la recherche de M. Réal Paquette (1 Message)
[TN] 1oz Copper vs. .5 oz Copper (3 Messages)
[TN] FW: JBC Soldering Comparison (1 Message)

Subject Sorted by Subject, Chronologically

From

Date

New Thread "Build Your Knowledge, Expertise and Industry Network" at IPCWorks 2004
Stephannie Caliendo
Fri, 23 Jul 2004 15:29:42 -0500
New Thread 1oz Copper vs. .5 oz Copper
Franklin
Wed, 28 Jul 2004 12:22:45 -0500
James Hofer
Wed, 28 Jul 2004 09:46:15 -0700
James Hofer
Wed, 28 Jul 2004 09:52:01 -0700
James Hofer
Wed, 28 Jul 2004 09:39:07 -0700
Mcmaster, Michael
Wed, 28 Jul 2004 09:40:39 -0700
Whittaker, Dewey (AZ75)
Wed, 28 Jul 2004 07:56:53 -0700
Cal Driscoll
Wed, 28 Jul 2004 10:38:12 -0400
Susan Mansilla
Wed, 28 Jul 2004 10:35:54 EDT
Cal Driscoll
Wed, 28 Jul 2004 10:25:47 -0400
Jeffrey Bush
Wed, 28 Jul 2004 10:05:20 -0400
Frank Kimmey
Wed, 28 Jul 2004 07:03:02 -0700
Cal Driscoll
Wed, 28 Jul 2004 08:19:42 -0400
New Thread 7628 prepreg?
Reeves, Tim R.
Fri, 16 Jul 2004 12:05:51 -0400
Brian Ellis
Fri, 16 Jul 2004 11:57:55 +0300
Colin McVean
Fri, 16 Jul 2004 07:53:14 +0100
Parial Swati
Fri, 16 Jul 2004 09:11:27 +0530
Eddie Rocha
Thu, 15 Jul 2004 09:59:10 -0700
Valerie St.Cyr
Tue, 13 Jul 2004 14:47:16 -0400
Paulus, Jim
Tue, 13 Jul 2004 13:44:57 -0500
Valerie St.Cyr
Tue, 13 Jul 2004 14:38:25 -0400
Brooks,Bill
Tue, 13 Jul 2004 11:31:23 -0700
Paulus, Jim
Tue, 13 Jul 2004 12:40:08 -0500
Frank Kimmey
Tue, 13 Jul 2004 10:28:09 -0700
Jeffrey Bush
Tue, 13 Jul 2004 13:17:45 -0400
Brooks,Bill
Tue, 13 Jul 2004 09:46:18 -0700
Jeffrey Bush
Tue, 13 Jul 2004 07:09:49 -0400
Andrew Medina
Tue, 13 Jul 2004 11:34:51 +0800
Jeffrey Bush
Mon, 12 Jul 2004 08:40:21 -0400
Brian Ellis
Sat, 10 Jul 2004 09:17:51 +0300
Mcmaster, Michael
Fri, 9 Jul 2004 16:58:41 -0700
Brooks,Bill
Fri, 9 Jul 2004 14:08:11 -0700
New Thread AA Adaptor
Douglas O. Pauls
Fri, 16 Jul 2004 15:39:55 -0500
Tom Parkinson
Fri, 16 Jul 2004 15:34:22 -0400
Schleman, Joe A.
Fri, 16 Jul 2004 14:21:52 -0400
Dave Simonik
Fri, 16 Jul 2004 13:41:33 -0400
Douglas O. Pauls
Fri, 16 Jul 2004 10:08:26 -0500
Douglas O. Pauls
Fri, 16 Jul 2004 10:07:28 -0500
Phil Nutting
Fri, 16 Jul 2004 10:57:24 -0400
Graham Naisbitt
Fri, 16 Jul 2004 15:54:31 +0100
Dave Simonik
Fri, 16 Jul 2004 10:22:44 -0400
Douglas O. Pauls
Fri, 16 Jul 2004 08:45:16 -0500
New Thread Allowable solder balls on a component?
COOKE, ROBERT W. (JSC-NX) (WGI)
Tue, 27 Jul 2004 09:24:49 -0500
Victor G. Hernandez
Tue, 27 Jul 2004 08:41:56 -0500
Richard Kraszewski
Tue, 27 Jul 2004 08:36:40 -0500
New Thread Antw: [TN] whatever happened
Guenter Grossmann
Mon, 12 Jul 2004 09:28:03 +0200
New Thread AOI standard
Guy Ramsey
Fri, 9 Jul 2004 12:46:39 -0400
Malewicz Wesley
Fri, 9 Jul 2004 11:04:25 -0400
New Thread Attention Designers: Albuquerque, NM
Stephannie Caliendo
Fri, 30 Jul 2004 10:08:19 -0500
New Thread Bellcore / Telecordia
Deborah Schepis
Fri, 30 Jul 2004 16:10:25 -0400
New Thread BGA Land Patterns
Dieter Bergman
Mon, 26 Jul 2004 09:08:52 -0500
<>
Fri, 23 Jul 2004 15:38:48 -0600
Dave Seymour
Fri, 23 Jul 2004 16:54:54 -0400
Werner Engelmaier
Fri, 23 Jul 2004 15:30:30 EDT
Tom Gervascio
Fri, 23 Jul 2004 13:45:13 -0400
Dave Seymour
Fri, 23 Jul 2004 10:16:50 -0400
New Thread BGA pad missmatch
DUTTON Phil
Thu, 29 Jul 2004 13:31:30 +1000
Shean Dalton
Wed, 28 Jul 2004 14:03:53 -0500
Werner Engelmaier
Wed, 28 Jul 2004 14:35:50 EDT
DUTTON Phil
Wed, 28 Jul 2004 12:20:57 +1000
New Thread Board depanelizing - scored boards
Dave Chapman
Fri, 2 Jul 2004 12:58:25 -0500
Dave Roach
Fri, 2 Jul 2004 11:10:00 -0500
New Thread Board Stack geometry
Anslow, Phillip
Tue, 13 Jul 2004 17:26:32 +0100
Paulus, Jim
Tue, 13 Jul 2004 11:03:35 -0500
Jeffrey Bush
Tue, 13 Jul 2004 11:17:32 -0400
Valerie St.Cyr
Tue, 13 Jul 2004 10:45:49 -0400
Kasprzak, Bill (sys) USX
Tue, 13 Jul 2004 10:35:08 -0400
Tempea, Ioan
Tue, 13 Jul 2004 10:32:01 -0400
Jeffrey Bush
Tue, 13 Jul 2004 10:15:02 -0400
Ofer Cohen
Tue, 13 Jul 2004 16:39:12 +0200
COOKE, ROBERT W. (JSC-NX) (WGI)
Tue, 13 Jul 2004 08:38:47 -0500
Whittaker, Dewey (AZ75)
Tue, 13 Jul 2004 06:30:47 -0700
Roger Stoops
Tue, 13 Jul 2004 09:04:33 -0400
New Thread BTU TRS21 Parts
Kasprzak, Bill (sys) USX
Wed, 21 Jul 2004 12:54:47 -0400
Scott Lefebvre
Wed, 21 Jul 2004 07:46:11 -0700
New Thread Class 1,2
Graham Naisbitt
Fri, 16 Jul 2004 15:56:19 +0100
Jeffrey Bush
Fri, 16 Jul 2004 10:53:36 -0400
Randy Bock Sr.
Fri, 16 Jul 2004 10:08:52 -0400
Rama Vemulapalli
Fri, 16 Jul 2004 14:05:01 GMT
New Thread cleaning solvent
Leigh-Ann Litavis
Wed, 7 Jul 2004 06:56:53 -0500
Brian Ellis
Sat, 3 Jul 2004 18:52:35 +0300
<>
Sat, 3 Jul 2004 11:45:31 EDT
Brian Ellis
Fri, 2 Jul 2004 18:48:01 +0300
<>
Fri, 2 Jul 2004 11:22:08 EDT
Charlie Pitarys
Fri, 2 Jul 2004 10:43:03 -0400
Douglas O. Pauls
Fri, 2 Jul 2004 07:42:10 -0500
Kasprzak, Bill (sys) USX
Fri, 2 Jul 2004 07:37:55 -0400
Brian Ellis
Fri, 2 Jul 2004 13:40:05 +0300
Murulidhara
Fri, 2 Jul 2004 15:39:15 +0530
New Thread Cleanliness of PCB
Shean Dalton
Mon, 26 Jul 2004 15:41:13 -0500
Brian Ellis
Sun, 25 Jul 2004 10:39:53 +0300
David Douthit
Sat, 24 Jul 2004 11:10:08 -0700
Peter Lee
Sat, 24 Jul 2004 11:02:26 -0700
New Thread conductive via fill drill drawing note
Dave Seymour
Mon, 26 Jul 2004 15:03:20 -0400
Jeffrey Bush
Mon, 26 Jul 2004 14:32:47 -0400
Whittaker, Dewey (AZ75)
Mon, 26 Jul 2004 10:35:17 -0700
Valerie St.Cyr
Mon, 26 Jul 2004 12:44:18 -0400
Michael Bonek
Mon, 26 Jul 2004 10:59:10 -0500
New Thread conformal coating on SMD
COOKE, ROBERT W. (JSC-NX) (WGI)
Mon, 12 Jul 2004 09:25:28 -0500
Douglas O. Pauls
Mon, 12 Jul 2004 07:43:20 -0500
Murulidhara
Mon, 12 Jul 2004 14:29:42 +0530
New Thread Cost of off shore (Bare board)
Linwood Goddard
Fri, 16 Jul 2004 16:12:37 -0700
Kasprzak, Bill (sys) USX
Fri, 16 Jul 2004 06:45:30 -0400
Happy Holden
Thu, 15 Jul 2004 19:29:55 -0400
Daniel Brandler
Thu, 15 Jul 2004 16:18:26 -0700
Thorup, John
Thu, 15 Jul 2004 14:47:32 -0700
Paulus, Jim
Thu, 15 Jul 2004 16:35:51 -0500
Blair K. Hogg
Thu, 15 Jul 2004 17:27:34 -0400
Brooks,Bill
Thu, 15 Jul 2004 14:18:37 -0700
Whittaker, Dewey (AZ75)
Thu, 15 Jul 2004 14:02:05 -0700
Jeffrey Bush
Thu, 15 Jul 2004 16:47:41 -0400
Cal Driscoll
Thu, 15 Jul 2004 13:06:40 -0400
New Thread Cost of Rework: Rework Cost Calculator Reference
bob wettermann
Wed, 28 Jul 2004 19:01:18 -0700
New Thread Death by Lethal Customer
Valerie St.Cyr
Tue, 20 Jul 2004 09:39:40 -0400
Daniel Brandler
Fri, 16 Jul 2004 09:23:18 -0700
Ahne Oosterhof
Fri, 16 Jul 2004 08:45:35 -0700
Franklin
Fri, 16 Jul 2004 10:07:46 -0500
Happy Holden
Fri, 16 Jul 2004 11:06:27 -0400
Franklin
Fri, 16 Jul 2004 09:38:18 -0500
R Sedlak
Fri, 16 Jul 2004 07:05:26 -0700
Jeffrey Bush
Fri, 16 Jul 2004 08:04:53 -0400
Brian Ellis
Fri, 16 Jul 2004 09:50:04 +0300
H. S. Miller
Fri, 16 Jul 2004 01:16:46 EDT
New Thread Death by Lethal Customer, 2nd thought
Phil Nutting
Fri, 16 Jul 2004 13:39:20 -0400
New Thread Design and Process Implementation for Embedded Passives
Alexandra Curtis
Wed, 7 Jul 2004 08:52:04 -0500
New Thread Design for Manufacture at Tektronix - Last Chance to Register
Alexandra Curtis
Tue, 6 Jul 2004 13:34:46 -0500
New Thread Designers Learning Symposium in Europe!
Stephannie Caliendo
Fri, 30 Jul 2004 08:58:34 -0500
New Thread Desktop AOI
Rich Lasko
Fri, 23 Jul 2004 14:29:43 -0500
New Thread Direct die attach to heat sink technology
Sam Wong
Tue, 6 Jul 2004 21:09:04 -0500
New Thread Dry Film
<>
Mon, 12 Jul 2004 19:58:50 EDT
Paulus, Jim
Mon, 12 Jul 2004 09:53:06 -0500
Edward Szpruch
Sun, 11 Jul 2004 07:05:53 +0200
<>
Sat, 10 Jul 2004 01:58:49 EDT
Eddie Rocha
Fri, 9 Jul 2004 16:07:53 -0700
Rudy Sedlak
Fri, 9 Jul 2004 18:45:00 EDT
Brummer Chuck
Fri, 9 Jul 2004 09:31:08 -0700
Jeffrey Bush
Fri, 9 Jul 2004 11:53:12 -0400
Colin McVean
Fri, 9 Jul 2004 15:09:38 +0100
Damon DeSilva
Fri, 9 Jul 2004 09:50:21 -0400
<>
Fri, 9 Jul 2004 09:39:25 EDT
New Thread electroetch and cleaner
Hans Shin
Fri, 2 Jul 2004 09:32:36 -0700
New Thread Embedded Passives Technology Workshop - Register Today
Alexandra Curtis
Thu, 29 Jul 2004 09:51:22 -0500
New Thread ESD Footwear Recommendation Wanted
Randy Bock Sr.
Fri, 9 Jul 2004 12:33:03 -0400
Ryan Grant
Fri, 9 Jul 2004 10:26:11 -0600
Leland Woodall
Fri, 9 Jul 2004 00:46:55 -0400
Kane, Joseph E
Thu, 8 Jul 2004 15:34:12 -0400
Lance Mayes
Thu, 8 Jul 2004 13:16:10 -0600
Cliff Knudson
Thu, 8 Jul 2004 10:32:55 -0700
Phil Nutting
Thu, 8 Jul 2004 08:59:55 -0400
Leland Woodall
Wed, 7 Jul 2004 23:53:01 -0500
New Thread ESD Training
Lance Mayes
Fri, 23 Jul 2004 13:33:01 -0600
Glenn Pelkey
Fri, 23 Jul 2004 08:01:43 -0700
Lance Mayes
Thu, 22 Jul 2004 13:23:17 -0600
Pasquito, Helena
Thu, 22 Jul 2004 13:42:50 -0400
New Thread Failure Reporting
Cliff Knudson
Wed, 21 Jul 2004 12:59:47 -0700
Roach, David
Wed, 21 Jul 2004 14:28:03 -0500
McCabe, Chris
Wed, 21 Jul 2004 15:04:04 -0400
Ryan Grant
Wed, 7 Jul 2004 15:52:27 -0600
Whittaker, Dewey (AZ75)
Tue, 6 Jul 2004 07:04:34 -0700
Douglas O. Pauls
Tue, 6 Jul 2004 06:30:42 -0500
Susan Mansilla
Fri, 2 Jul 2004 21:23:32 EDT
Douglas O. Pauls
Fri, 2 Jul 2004 16:20:28 -0500
<>
Fri, 2 Jul 2004 14:05:18 -0700
New Thread Feeder question
Mark Austin
Tue, 13 Jul 2004 08:11:00 +0100
Kathy Kuhlow
Mon, 12 Jul 2004 15:37:28 -0500
New Thread Fillet formation on CR-range Cerled diodes
Grant Emandien
Mon, 12 Jul 2004 12:54:17 +0200
New Thread Glue on PCB
Barmuta, Mike
Fri, 2 Jul 2004 09:16:41 -0700
Zweigart, Siegmund
Fri, 2 Jul 2004 17:29:02 +0200
New Thread Gold Embrittlement
Donald Vischulis
Thu, 29 Jul 2004 10:18:46 -0500
New Thread Haywire vs. jumper wires
Randy Bock Sr.
Thu, 8 Jul 2004 14:54:21 -0400
New Thread Haywire vs. jumper wries
Mary Jane Chism
Fri, 9 Jul 2004 11:09:38 -0500
Maxine Greenwood
Fri, 9 Jul 2004 10:21:12 -0500
COOKE, ROBERT W. (JSC-NX) (WGI)
Fri, 9 Jul 2004 08:19:51 -0500
Whittaker, Dewey (AZ75)
Fri, 9 Jul 2004 06:27:01 -0700
Mary Jane Chism
Fri, 9 Jul 2004 08:09:33 -0500
Brian Ellis
Fri, 9 Jul 2004 11:50:18 +0300
Mary Jane Chism
Thu, 8 Jul 2004 15:23:28 -0500
Bruce D Stilmack
Thu, 8 Jul 2004 14:46:09 -0400
Marita Zavala
Thu, 8 Jul 2004 11:45:30 -0700
New Thread How to remove silk screen from the pad
Ken Patel
Wed, 7 Jul 2004 16:15:57 -0700
New Thread Inspection outline
Suzanne Foulkes
Tue, 20 Jul 2004 15:31:20 -0400
Connie Korth
Tue, 20 Jul 2004 13:47:42 -0500
New Thread IPC 356
Daniel Brandler
Mon, 12 Jul 2004 17:12:06 -0700
Guy Ramsey
Mon, 12 Jul 2004 12:35:45 -0400
Rich Reinheimer
Mon, 12 Jul 2004 11:49:32 -0400
New Thread IPC Webcast - The Chemistry of Garbage and Lead
Alexandra Curtis
Mon, 12 Jul 2004 15:27:00 -0500
Alexandra Curtis
Fri, 9 Jul 2004 15:11:12 -0500
New Thread JBC Soldering Comparison
Dehoyos, Ramon
Fri, 23 Jul 2004 11:11:49 -0700
New Thread Karen Walters/USA/Skyworks is out of the office.
Karen Walters
Wed, 7 Jul 2004 01:00:48 -0400
New Thread Lead Free
Whittaker, Dewey (AZ75)
Fri, 30 Jul 2004 13:34:15 -0700
David Suraski
Fri, 30 Jul 2004 16:25:29 -0400
David Suraski
Fri, 30 Jul 2004 16:25:03 -0400
Victor G. Hernandez
Fri, 30 Jul 2004 15:20:10 -0500
David Suraski
Fri, 30 Jul 2004 16:09:11 -0400
Morse, Carrie
Fri, 30 Jul 2004 16:03:18 -0400
Antonio
Fri, 30 Jul 2004 16:37:31 -0300
New Thread Lead Free Transition
Whittaker, Dewey (AZ75)
Thu, 1 Jul 2004 15:21:12 -0700
Douglas O. Pauls
Thu, 1 Jul 2004 16:43:14 -0500
New Thread Leadfree transition plan
Dave Chapman
Fri, 2 Jul 2004 06:34:09 -0500
Barmuta, Mike
Thu, 1 Jul 2004 15:38:07 -0700
New Thread Long Reflow Soak Times for BGAs?
Macko, Joe @ IEC
Tue, 6 Jul 2004 08:52:43 -0700
Shean Dalton
Fri, 2 Jul 2004 10:28:14 -0500
Leo Higgins
Thu, 1 Jul 2004 23:17:57 -0700
Rick Thompson
Thu, 1 Jul 2004 20:54:15 -0700
New Thread LPI soldermasks
Steve Mikell
Sat, 31 Jul 2004 10:02:41 +0700
Jack C. Olson
Fri, 30 Jul 2004 11:14:21 -0500
Juan T. Marugán
Fri, 30 Jul 2004 07:25:55 -0500
James Hofer
Thu, 29 Jul 2004 10:58:01 -0700
Eddie Rocha
Thu, 29 Jul 2004 08:32:20 -0700
Jeffrey Bush
Thu, 29 Jul 2004 10:06:26 -0400
Paulus, Jim
Thu, 29 Jul 2004 08:44:15 -0500
Juan T. Marugán
Thu, 29 Jul 2004 01:29:21 -0500
New Thread Make Your Travel Plans and Register TODAY!
Alexandra Curtis
Thu, 22 Jul 2004 10:47:12 -0500
New Thread Max. Torque applied to a screw securing a PCB
Phil Nutting
Tue, 6 Jul 2004 09:27:14 -0400
Randy Bock Sr.
Thu, 1 Jul 2004 12:57:04 -0400
Croslin, Robert
Thu, 1 Jul 2004 08:59:47 -0400
Brian Ellis
Thu, 1 Jul 2004 09:47:42 +0300
New Thread My solderball saga...
Steve Gregory
Thu, 22 Jul 2004 14:37:44 EDT
Terry Kozlyk
Thu, 22 Jul 2004 07:58:06 -0700
Steve Gregory
Thu, 22 Jul 2004 10:10:09 EDT
Dehoyos, Ramon
Thu, 22 Jul 2004 05:49:40 -0700
Randy Bock Sr.
Wed, 21 Jul 2004 16:12:12 -0400
James TerVeen
Wed, 21 Jul 2004 13:59:05 -0400
Steve Gregory
Wed, 21 Jul 2004 13:41:17 EDT
New Thread Mydata Info
Reuven ROKAH
Thu, 8 Jul 2004 11:54:36 +0300
Rick Thompson
Wed, 7 Jul 2004 17:56:37 -0700
Steve Gregory
Wed, 7 Jul 2004 13:57:17 EDT
Dave Chapman
Wed, 7 Jul 2004 12:52:04 -0500
Tom Parkinson
Wed, 7 Jul 2004 13:43:39 -0400
New Thread New Mexico & area Designers
Stephannie Caliendo
Mon, 19 Jul 2004 11:18:58 -0500
New Thread NTC - RE: [TN] Death by Lethal Customer
Colin McVean
Fri, 16 Jul 2004 16:08:53 +0100
Franklin
Fri, 16 Jul 2004 10:00:19 -0500
Phil Nutting
Fri, 16 Jul 2004 10:54:36 -0400
New Thread NTC RE: [TN] Soldermask on PTH pad???
Craig Cullum
Thu, 1 Jul 2004 08:15:12 -0500
New Thread Out Of The Office
Paul Ziarek
Fri, 30 Jul 2004 07:29:08 -0500
New Thread Paul Lapointe/Kan/Mitel is no longer emploied at Mitel
Paul Lapointe
Fri, 2 Jul 2004 10:35:41 -0400
New Thread Paul Lapointe/Kan/Mitel is no longer employed at Mitel
Randy Bock Sr.
Fri, 2 Jul 2004 11:18:47 -0400
New Thread Pin Size vs. Plated Through Hole Size
Dehoyos, Ramon
Fri, 23 Jul 2004 09:45:34 -0700
Morse, Carrie
Fri, 23 Jul 2004 11:54:31 -0400
Victor G. Hernandez
Fri, 23 Jul 2004 10:09:23 -0500
Dehoyos, Ramon
Fri, 23 Jul 2004 07:32:49 -0700
Roger Stoops
Tue, 13 Jul 2004 08:38:03 -0400
Jeffrey Bush
Mon, 12 Jul 2004 15:18:07 -0400
Franklin
Mon, 12 Jul 2004 12:22:20 -0500
Pasquito, Helena
Mon, 12 Jul 2004 12:38:51 -0400
New Thread press fit connectors
Whittaker, Dewey (AZ75)
Mon, 19 Jul 2004 08:11:56 -0700
Dehoyos, Ramon
Fri, 16 Jul 2004 13:12:14 -0700
COOKE, ROBERT W. (JSC-NX) (WGI)
Fri, 16 Jul 2004 14:07:08 -0500
Collins Graham
Fri, 16 Jul 2004 13:59:14 -0400
New Thread PWB SOLDERABILITY
Jeffrey Bush
Wed, 21 Jul 2004 07:51:36 -0400
Marsico, James
Wed, 21 Jul 2004 07:34:21 -0400
Pete Lymn
Wed, 21 Jul 2004 11:07:01 +0100
Donald Vischulis
Tue, 20 Jul 2004 19:31:38 -0500
R Sedlak
Tue, 20 Jul 2004 14:57:58 -0700
Hal Winslow
Tue, 20 Jul 2004 15:46:27 -0400
Marsico, James
Tue, 20 Jul 2004 15:29:06 -0400
New Thread Quality Net?
Jeffrey Bush
Tue, 13 Jul 2004 16:44:12 -0400
Jason W. Gregory
Tue, 13 Jul 2004 15:27:27 -0500
Jeffrey Bush
Tue, 13 Jul 2004 16:18:02 -0400
Tom Parkinson
Tue, 13 Jul 2004 16:01:32 -0400
Daniel Brandler
Tue, 13 Jul 2004 09:44:02 -0700
New Thread Question about panelization
Mcmaster, Michael
Mon, 12 Jul 2004 14:52:52 -0700
Rich Reinheimer
Mon, 12 Jul 2004 15:49:39 -0400
Croslin, Robert
Mon, 12 Jul 2004 15:57:07 -0400
Jeffrey Bush
Mon, 12 Jul 2004 15:22:56 -0400
Damon DeSilva
Mon, 12 Jul 2004 14:51:51 -0400
Tempea, Ioan
Mon, 12 Jul 2004 14:45:49 -0400
John Foster
Mon, 12 Jul 2004 11:31:32 -0700
New Thread RE : [TN] SN63
Bruce D Stilmack
Wed, 28 Jul 2004 13:12:45 -0400
Edwin Louis
Wed, 28 Jul 2004 10:33:31 -0400
Kasprzak, Bill (sys) USX
Wed, 28 Jul 2004 10:24:03 -0400
Lee Whiteman
Wed, 28 Jul 2004 10:35:20 -0400
Bruce D Stilmack
Wed, 28 Jul 2004 09:53:44 -0400
David Suraski
Wed, 28 Jul 2004 09:50:14 -0400
Brian Ellis
Wed, 28 Jul 2004 16:47:30 +0300
Edwin Louis
Wed, 28 Jul 2004 09:36:50 -0400
Dehoyos, Ramon
Wed, 28 Jul 2004 06:21:47 -0700
Eric Laroche
Wed, 28 Jul 2004 08:03:40 -0400
New Thread Reballing an LTCC component
David Tremmel
Fri, 2 Jul 2004 12:36:19 -0500
New Thread reflow oven question
Daan Terstegge
Tue, 27 Jul 2004 17:38:20 +0200
<>
Tue, 27 Jul 2004 09:01:22 EDT
New Thread Reflowing leadfree CSP
Reuven ROKAH
Wed, 21 Jul 2004 10:12:48 +0300
Vladimir Igoshev
Tue, 20 Jul 2004 16:23:15 -0400
Guy Ramsey
Tue, 20 Jul 2004 15:36:13 -0400
Peter L
Tue, 20 Jul 2004 14:02:34 -0500
New Thread Removal of non functional pads
Werner Engelmaier
Thu, 29 Jul 2004 14:02:27 EDT
Werner Engelmaier
Thu, 29 Jul 2004 13:54:46 EDT
Werner Engelmaier
Thu, 29 Jul 2004 13:35:47 EDT
Jeffrey Bush
Wed, 28 Jul 2004 07:46:55 -0400
Ofer Cohen
Wed, 28 Jul 2004 08:11:58 +0200
Whittaker, Dewey (AZ75)
Tue, 27 Jul 2004 11:07:34 -0700
Jeffrey Bush
Tue, 27 Jul 2004 13:59:22 -0400
Mcmaster, Michael
Tue, 27 Jul 2004 10:25:57 -0700
Frank Kimmey
Tue, 27 Jul 2004 06:35:18 -0700
Damon DeSilva
Tue, 27 Jul 2004 08:00:50 -0400
Jeffrey Bush
Tue, 27 Jul 2004 07:21:29 -0400
Brian Ellis
Tue, 27 Jul 2004 13:36:58 +0300
Ofer Cohen
Tue, 27 Jul 2004 12:47:37 +0200
New Thread Repackaging of active power device on heat sink
Sam Wong
Mon, 12 Jul 2004 03:18:46 -0500
New Thread Replacement Parts for old Quad printer?
Rick Thompson
Fri, 30 Jul 2004 08:32:37 -0700
<>
Fri, 30 Jul 2004 08:37:39 EDT
Rick Thompson
Thu, 29 Jul 2004 08:37:49 -0700
New Thread Rework Costs
Reuven ROKAH
Wed, 28 Jul 2004 15:23:20 +0300
Suzanne Foulkes
Wed, 28 Jul 2004 07:29:50 -0400
New Thread Rjection of PCBs because of BGAs number replacements
Jeff Ferry
Tue, 6 Jul 2004 09:09:48 -0400
Reuven ROKAH
Sun, 4 Jul 2004 09:52:35 +0300
New Thread RMA's
Jeffrey Bush
Thu, 22 Jul 2004 16:41:04 -0400
Randy Bock Sr.
Thu, 22 Jul 2004 15:53:06 -0400
Cliff Knudson
Thu, 22 Jul 2004 12:44:22 -0700
Morse, Carrie
Thu, 22 Jul 2004 15:35:49 -0400
New Thread Sign off
Bob Perkins
Fri, 23 Jul 2004 15:28:20 -0700
New Thread Simple, basic axial from and trim machine...
James TerVeen
Mon, 26 Jul 2004 14:45:14 -0400
Phil Nutting
Mon, 26 Jul 2004 12:40:26 -0400
Charles Caswell
Mon, 26 Jul 2004 10:39:53 -0500
Collins Graham
Mon, 26 Jul 2004 10:45:09 -0400
Morse, Carrie
Mon, 26 Jul 2004 10:30:08 -0400
Steve Gregory
Mon, 26 Jul 2004 10:21:49 EDT
New Thread SMT Components
Guy Ramsey
Mon, 26 Jul 2004 11:23:10 -0400
Dave Chapman
Mon, 26 Jul 2004 09:19:18 -0500
Morse, Carrie
Mon, 26 Jul 2004 10:04:34 -0400
Lance Mayes
Mon, 26 Jul 2004 07:48:36 -0600
New Thread SN63
David Suraski
Wed, 28 Jul 2004 09:06:27 -0400
Bloomquist, Ken
Wed, 28 Jul 2004 06:02:16 -0700
Kasprzak, Bill (sys) USX
Wed, 28 Jul 2004 07:52:46 -0400
David Suraski
Wed, 28 Jul 2004 07:42:58 -0400
Bloomquist, Ken
Tue, 27 Jul 2004 14:54:09 -0700
New Thread SNEC Mtg
Gary Ferrari
Wed, 28 Jul 2004 19:32:08 EDT
New Thread Solder Balls
Dave Chapman
Thu, 1 Jul 2004 09:56:25 -0500
Mary Jane Chism
Thu, 1 Jul 2004 09:49:23 -0500
New Thread Solder Bridging on a Thru-hole connector
Tom Gervascio
Fri, 23 Jul 2004 14:29:30 -0400
Rich Lasko
Fri, 23 Jul 2004 12:46:16 -0500
Cagle, James
Fri, 23 Jul 2004 11:33:16 -0400
Steve Gregory
Fri, 23 Jul 2004 10:15:49 EDT
Leo Lambert
Fri, 23 Jul 2004 10:01:12 -0400
Dehoyos, Ramon
Thu, 22 Jul 2004 13:05:24 -0700
Chad Haima
Thu, 22 Jul 2004 10:43:59 -0700
Rich Lasko
Thu, 22 Jul 2004 12:31:52 -0500
New Thread solder mask
Charles Caswell
Thu, 1 Jul 2004 09:00:52 -0500
Brian Ellis
Thu, 1 Jul 2004 10:20:32 +0300
New Thread Soldermask on PTH pad???
Jeffrey Bush
Tue, 6 Jul 2004 10:05:52 -0400
New Thread Solvent name & Mfg.
Brian Ellis
Fri, 9 Jul 2004 11:41:53 +0300
Karnwal, Pankaj
Fri, 9 Jul 2004 05:52:35 +0200
New Thread Sparying Flexible ink
Leigh-Ann Litavis
Thu, 15 Jul 2004 12:18:47 -0500
New Thread Specifying PWB Finishes
Jeffrey Bush
Tue, 6 Jul 2004 09:59:37 -0400
Dave Chapman
Fri, 2 Jul 2004 13:12:43 -0500
Franklin
Fri, 2 Jul 2004 13:08:03 -0500
Pete Lymn
Fri, 2 Jul 2004 10:47:16 +0100
Kane, Joseph E
Thu, 1 Jul 2004 17:04:06 -0400
New Thread Steve Vargas/Sippican is out of the office.
Stephen M. Vargas
Mon, 12 Jul 2004 04:00:38 -0400
New Thread Suggestions for removing solder balls from wave
Kathy Kuhlow
Wed, 21 Jul 2004 10:49:16 -0500
Cheryl Tulkoff
Wed, 21 Jul 2004 09:36:07 -0500
New Thread Technical resources
CG
Thu, 22 Jul 2004 16:17:49 -0400
New Thread Tin Whisker Mitigation
Edwin Louis
Wed, 28 Jul 2004 10:44:44 -0400
New Thread Tin Whiskers
- Bogert
Sat, 31 Jul 2004 11:14:16 -0400
COOKE, ROBERT W. (JSC-NX) (WGI)
Mon, 26 Jul 2004 10:32:28 -0500
Kasprzak, Bill (sys) USX
Mon, 26 Jul 2004 10:59:43 -0400
David Douthit
Mon, 26 Jul 2004 07:46:50 -0700
David Suraski
Mon, 26 Jul 2004 10:35:54 -0400
Edwin Louis
Mon, 26 Jul 2004 10:19:37 -0400
New Thread tin-plated brass solderability
Marsico, James
Tue, 27 Jul 2004 15:06:41 -0400
New Thread Toe-down configuration for gull wing leads
Guy Ramsey
Fri, 30 Jul 2004 16:32:16 -0400
Daan Terstegge
Fri, 30 Jul 2004 09:18:34 +0200
Guy Ramsey
Thu, 29 Jul 2004 17:41:04 -0400
Charles Caswell
Thu, 29 Jul 2004 16:23:59 -0500
Daan Terstegge
Thu, 29 Jul 2004 22:02:52 +0200
Charles Caswell
Thu, 29 Jul 2004 14:15:45 -0500
Daan Terstegge
Thu, 29 Jul 2004 19:11:44 +0200
New Thread Via Spacing
Kaye Clayo
Wed, 14 Jul 2004 09:31:18 -0400
Ofer Cohen
Wed, 14 Jul 2004 08:20:03 +0200
Franklin
Tue, 13 Jul 2004 15:52:34 -0500
Barry Gallegos
Tue, 13 Jul 2004 14:22:47 -0600
New Thread whatever happened
Dehoyos, Ramon
Thu, 8 Jul 2004 05:31:40 -0700
Steve Gregory
Wed, 7 Jul 2004 18:44:05 EDT
Crepeau, Phil
Wed, 7 Jul 2004 11:56:31 -0700
New Thread [NT] À la recherche de M. Réal Paquette
Bissonnette, Jean-Francois
Fri, 9 Jul 2004 09:29:23 -0400
New Thread [TN] 1oz Copper vs. .5 oz Copper
James Hofer
Wed, 28 Jul 2004 13:52:08 -0700
Franklin
Wed, 28 Jul 2004 15:31:46 -0500
Jeffrey Bush
Wed, 28 Jul 2004 15:14:02 -0400
New Thread [TN] FW: JBC Soldering Comparison
Dehoyos, Ramon
Fri, 23 Jul 2004 11:28:05 -0700

ATOM RSS1 RSS2