TECHNET Archives

June 2001

TechNet@IPC.ORG
Options: Hide Table of Contents

< Jay Bitanga > (1 Message)
<> (13 Messages)
<Darrel Therriault> (1 Message)
<Peter George Duncan> (18 Messages)
<Rudy Sedlak> (4 Messages)
Alain Savard (1 Message)
Alan Brewin (2 Messages)
Albin, David (1 Message)
Allen Hu (1 Message)
Anderson, Greg (IndSys, GEFanuc, NA) (2 Messages)
Andrew Hoggan (3 Messages)
Ashok Dhawan (1 Message)
Avigdor Jakubinsky (2 Messages)
Barbara Burcham (1 Message)
Barmuta, Mike (3 Messages)
Barry Gallegos (1 Message)
Bartkowaik Christine (3 Messages)
bbarr (2 Messages)
Becerra Alejandro (1 Message)
Benjamin Zhu (1 Message)
Bev Christian (5 Messages)
Bill Butman (1 Message)
Bill Davis (1 Message)
Bill Decray (1 Message)
Bissonnette, Jean-Francois (5 Messages)
Bogdan Gabi (2 Messages)
Bolis Bortolo BB PCBDesign (1 Message)
Brad Saunders (1 Message)
Brian Ellis (17 Messages)
Brian L. Guidi (1 Message)
Brian McCrory (1 Message)
Brocious, Dave A (1 Message)
Bruce Bryla (1 Message)
Busko, Wolfgang (2 Messages)
C. Jeffrey Char (1 Message)
Campbell, William (wcampbel) (7 Messages)
Carl Ray (1 Message)
Carroll, George (1 Message)
Charles Lawson (2 Messages)
Chris Gifford (3 Messages)
Chuck Brummer (3 Messages)
Chuck Garth (1 Message)
Clive ffitch (1 Message)
Cormac MacMahon (1 Message)
Craig Hillman (6 Messages)
Crepeau, Phil (8 Messages)
Creswick, Steven (6 Messages)
D.Terstegge (2 Messages)
Darrel Therriault (2 Messages)
David Douthit (6 Messages)
David Fish (3 Messages)
David Hillman (4 Messages)
David Suraski (2 Messages)
Dieselberg, Ron (3 Messages)
Dorothy M. Lush (2 Messages)
Doty, Mike (2 Messages)
Douglas Pauls (5 Messages)
DUTTON Phil (1 Message)
Dwight Mattix (2 Messages)
Earl Moon (7 Messages)
Ed Cosper (2 Messages)
Ed Popielarski (1 Message)
Ed Valentine (2 Messages)
Ellsworth D. Berkowitz (1 Message)
Eric Christison (2 Messages)
Eric Dawson (1 Message)
Fernando Gómez (1 Message)
Francois Monette (2 Messages)
Frank Kimmey (2 Messages)
Furrow, Robert Gordon (Bob) (2 Messages)
Gabriela Bogdan (3 Messages)
Galang, Jerry (2 Messages)
Gary Ferrari (2 Messages)
Gary McCauley (1 Message)
Genny Gibbard (3 Messages)
gleason (5 Messages)
Goldman, Patricia J. (1 Message)
Graham Collins (1 Message)
Graham Naisbitt (8 Messages)
Gregg Klawson (1 Message)
Guenter Grossmann (2 Messages)
Guy Ramsey (6 Messages)
Hann Pang (3 Messages)
Hans Hinners (4 Messages)
Hans Shin (1 Message)
Hollandsworth, Ron (4 Messages)
Howard Watson (1 Message)
Ingemar Hernefjord (EMW) (7 Messages)
Jack Crawford (6 Messages)
James Tingey (1 Message)
Jana L. Carraway (1 Message)
Jason Gregory (8 Messages)
Jason Larson, AScT (1 Message)
Jerry Mosur (1 Message)
Jiang Ping (1 Message)
John Brewer (2 Messages)
John Fahey (4 Messages)
Jon Moore (12 Messages)
Jonathan A Noquil (2 Messages)
Jorge Santana (3 Messages)
Joseph Keary (2 Messages)
Joseph Ng (2 Messages)
Joyce Koo (5 Messages)
Julien Bouchard (1 Message)
Kane, Joseph (1 Message)
Kasprzak, Bill (sys) USX (5 Messages)
Kathy Bergman (3 Messages)
Kathy Kuhlow (12 Messages)
Keith Calhoun (1 Message)
Ken Mc Gowan (4 Messages)
Kevin Saillard (1 Message)
Kiet Dang (1 Message)
Larry J. Fisher (1 Message)
Lee Whiteman (7 Messages)
Lefebvre, Scott (2 Messages)
LI YUAN (1 Message)
Lim Yak Peng (1 Message)
Lon Weffers (2 Messages)
Lou Hart (7 Messages)
Luca Amato (1 Message)
Lush, Dorothy (1 Message)
Mario Hernandez (2 Messages)
Mark Charlton (1 Message)
Mark Orlowski (1 Message)
mark simmons (1 Message)
Marsico, James (15 Messages)
Martin Christie (3 Messages)
Mary Jane Chism (1 Message)
Matthew Lamkin (3 Messages)
May William D (Dean) CNIN (1 Message)
Mengers, William D. (6 Messages)
Michael Forrester (1 Message)
Michael Lester (1 Message)
michael (1 Message)
Mike Di Giacomo (1 Message)
Mike Fenner (10 Messages)
Misner, Bruce (1 Message)
Nancy Reynolds/MKT/HQ/KEMET/US (1 Message)
Nancy Trumbull (1 Message)
Neda Thrash (3 Messages)
Nicole Landreville (2 Messages)
Noble, Ed (1 Message)
Paul Brionez (1 Message)
Paul Gill (1 Message)
Paul Klasek (3 Messages)
Paul Ziarek (1 Message)
PERALTA, Kevin (BREA) (1 Message)
Peter Smith (1 Message)
Peter Swanson (4 Messages)
Phil Bavaro (1 Message)
Phil Nutting (10 Messages)
Phillip E. Hinton (4 Messages)
PL (1 Message)
Richard Hamilton (6 Messages)
Rick Babyak (1 Message)
Rick Howieson (6 Messages)
Rick Thompson (3 Messages)
Riling, James J (1 Message)
Rob Day (1 Message)
Rod Smith (1 Message)
Roger M. Stoops (2 Messages)
Roland Jaquet (2 Messages)
Ryan Grant (2 Messages)
Safavi-Bayat,Shahed (3 Messages)
sahmad (1 Message)
Sasha Miladinovic (4 Messages)
Sauer, Steven T. (1 Message)
Shapira Motti (1 Message)
Shirley Xiao (2 Messages)
Smith Russell PO US (1 Message)
Steffen, Don E (1 Message)
Stephannie Caliendo (1 Message)
Stephen Brown (1 Message)
Stephen R. Gregory (30 Messages)
Stephen S. Schiera (1 Message)
Steve Abrahamson (7 Messages)
Steve Joy (3 Messages)
Steve Kelly (1 Message)
Steve Underwood (2 Messages)
Susan James (1 Message)
Ted Tontis (5 Messages)
Tenison Stone (1 Message)
Terry Exell (1 Message)
Terveen, James @ NARDAEAST (1 Message)
The Job Shop (1 Message)
Thomas Han (1 Message)
Thomas R. Fisher (1 Message)
Timothy Reeves (3 Messages)
Tom B. (6 Messages)
Tom Burek (1 Message)
Tom Parkinson - Quality System Manager (2 Messages)
Tony Conlon (2 Messages)
Tony Steinke (2 Messages)
Vandendolder, Ron (1 Message)
Vanderhoof, Brad (2 Messages)
wejlaw (1 Message)
Wenger, George M (George) (1 Message)
Werner Engelmaier (12 Messages)
West, Jim (1 Message)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender < Jay Bitanga >
Laser Trimmer for Ceramic Substrate Traces/Wires
< Jay Bitanga >
Fri, 22 Jun 2001 06:19:13 +0000
New Sender <>
Re: **** PCB's - HASL -v- OSP
<>
Thu, 28 Jun 2001 15:12:03 -0500
Re: **** PCB's - HASL -v- OSP
<>
Thu, 28 Jun 2001 16:26:54 EDT
Re: **** PCB's - HASL -v- OSP
<>
Thu, 28 Jun 2001 15:54:03 -0500
Re: Arbitration Clauses
<>
Wed, 20 Jun 2001 07:58:09 -0500
Re: Conformal coating
<>
Wed, 27 Jun 2001 14:38:13 -0500
Re: Delamination Blisters...
<>
Mon, 18 Jun 2001 15:20:58 EDT
Re: Electroplating coating for Metallographic Preparation
<>
Wed, 6 Jun 2001 09:06:49 EDT
Re: Hi-Temp Masking Tape
<>
Fri, 22 Jun 2001 07:51:10 -0500
Laser Drill
<>
Mon, 4 Jun 2001 13:53:33 EDT
Laser Drilling
<>
Mon, 4 Jun 2001 13:47:52 EDT
New Domain
<>
Wed, 20 Jun 2001 08:03:26 -0500
Re: New Domain - Red faced, AGAIN!
<>
Wed, 20 Jun 2001 09:08:20 -0500
Re: QA Note
<>
Wed, 20 Jun 2001 11:06:54 -0500
New Sender <Darrel Therriault>
Thermal Relief
<Darrel Therriault>
Tue, 5 Jun 2001 13:57:27 -0700
New Sender <Peter George Duncan>
Re: "Touchy" Question...
<Peter George Duncan>
Tue, 19 Jun 2001 17:57:48 +0800
Re: BGA
<Peter George Duncan>
Fri, 29 Jun 2001 08:59:49 +0800
Re: BGA Max temps & times?
<Peter George Duncan>
Tue, 12 Jun 2001 12:18:20 +0800
Re: BGA Xray Inspection: 100% or SPC controlled
<Peter George Duncan>
Wed, 20 Jun 2001 08:55:17 +0800
Re: clean air
<Peter George Duncan>
Mon, 18 Jun 2001 08:19:47 +0800
Re: Exposed copper
<Peter George Duncan>
Mon, 4 Jun 2001 08:54:05 +0800
Re: Its too darn hot to work
<Peter George Duncan>
Tue, 26 Jun 2001 12:04:44 +0800
Re: Looking for a "special" solder paste dispenser
<Peter George Duncan>
Tue, 12 Jun 2001 08:04:07 +0800
Re: Marking
<Peter George Duncan>
Tue, 26 Jun 2001 10:53:13 +0800
Re: Measling...
<Peter George Duncan>
Tue, 5 Jun 2001 10:23:07 +0800
Re: Measling...
<Peter George Duncan>
Wed, 6 Jun 2001 12:32:35 +0800
Re: Ni thickness
<Peter George Duncan>
Tue, 5 Jun 2001 10:41:57 +0800
Re: Ni thickness
<Peter George Duncan>
Tue, 5 Jun 2001 15:17:45 +0800
Re: SOLDER FOIL
<Peter George Duncan>
Tue, 5 Jun 2001 10:30:19 +0800
Re: Talcum powder on wires
<Peter George Duncan>
Fri, 8 Jun 2001 07:49:59 +0800
Thin Thermal Pad Materials
<Peter George Duncan>
Fri, 8 Jun 2001 10:32:30 +0800
Re: Universal fixtures
<Peter George Duncan>
Mon, 18 Jun 2001 10:11:34 +0800
Re: Which Solder Mask
<Peter George Duncan>
Fri, 8 Jun 2001 12:59:50 +0800
New Sender <Rudy Sedlak>
Re: Copper Plating Aluminum
<Rudy Sedlak>
Fri, 29 Jun 2001 01:43:24 EDT
Re: Oxidized copper pad
<Rudy Sedlak>
Wed, 6 Jun 2001 17:12:27 EDT
Re: SOLDER FOIL
<Rudy Sedlak>
Mon, 4 Jun 2001 15:38:53 EDT
Re: Sulfuric peroxide preplate microetch
<Rudy Sedlak>
Tue, 12 Jun 2001 16:42:16 EDT
New Sender Alain Savard
Minimum requirements for final rinse in assembled boards
Alain Savard
Tue, 5 Jun 2001 11:44:09 -0400
New Sender Alan Brewin
Re: Coating vs. UL-approval
Alan Brewin
Tue, 19 Jun 2001 10:20:28 +0100
Re: Conformal coating: white haze
Alan Brewin
Tue, 19 Jun 2001 09:28:27 +0100
New Sender Albin, David
Re: Copper Plating Aluminum
Albin, David
Fri, 29 Jun 2001 08:45:12 +0100
New Sender Allen Hu
Re: Bare board shelf Life
Allen Hu
Wed, 20 Jun 2001 04:57:34 -0500
New Sender Anderson, Greg (IndSys, GEFanuc, NA)
Barcode Readers
Anderson, Greg (IndSys, GEFanuc, NA)
Mon, 18 Jun 2001 16:35:43 -0400
Re: flowing solder pot
Anderson, Greg (IndSys, GEFanuc, NA)
Wed, 20 Jun 2001 09:14:34 -0400
New Sender Andrew Hoggan
Re: **** PCB's - HASL -v- OSP
Andrew Hoggan
Thu, 28 Jun 2001 18:52:53 +0100
Re: **** PCB's - HASL -v- OSP
Andrew Hoggan
Fri, 29 Jun 2001 08:44:23 +0100
Re: Multiple Thermal Stress
Andrew Hoggan
Wed, 27 Jun 2001 09:13:15 +0100
New Sender Ashok Dhawan
: TEST PROBES WITH BLACK COLORATION ON SLIDING AREA
Ashok Dhawan
Tue, 26 Jun 2001 08:49:20 -0500
New Sender Avigdor Jakubinsky
Re: "Paradigm" ERP software by Cimnet
Avigdor Jakubinsky
Sat, 30 Jun 2001 10:25:21 -0500
DFM & DFT guide
Avigdor Jakubinsky
Wed, 27 Jun 2001 10:09:52 +0200
New Sender Barbara Burcham
Looking for current carrying capacity of vias.
Barbara Burcham
Thu, 21 Jun 2001 10:49:53 -0500
New Sender Barmuta, Mike
Re: Electroplating coating for Metallographic Preparation
Barmuta, Mike
Wed, 6 Jun 2001 07:25:10 -0700
Re: solder mask tables
Barmuta, Mike
Fri, 8 Jun 2001 15:27:35 -0700
Re: Sulfuric peroxide preplate microetch
Barmuta, Mike
Tue, 12 Jun 2001 15:54:05 -0700
New Sender Barry Gallegos
Hot Bar Soldering
Barry Gallegos
Thu, 21 Jun 2001 11:29:49 -0600
New Sender Bartkowaik Christine
Re: BGA
Bartkowaik Christine
Thu, 28 Jun 2001 13:59:01 -0400
PCB Finish with Mirco-BGA's
Bartkowaik Christine
Fri, 29 Jun 2001 07:01:50 -0400
PCB's with Micro BGA's.
Bartkowaik Christine
Wed, 27 Jun 2001 14:57:16 -0400
New Sender bbarr
Re: Minimum requirements for final rinse in assembled boards
bbarr
Tue, 5 Jun 2001 15:56:05 -0400
Re: Need Sony CPD-1201/9000 monitor
bbarr
Mon, 25 Jun 2001 08:06:00 -0400
New Sender Becerra Alejandro
Electroplating coating for Metallographic Preparation
Becerra Alejandro
Tue, 5 Jun 2001 18:37:41 -0500
New Sender Benjamin Zhu
Flexible Circuit Board Material Resoure
Benjamin Zhu
Wed, 20 Jun 2001 10:08:11 +0800
New Sender Bev Christian
0201 land pattern and stencil successes, failures and recommendat ions
Bev Christian
Fri, 8 Jun 2001 13:14:35 -0400
Re: Black Pad...
Bev Christian
Wed, 27 Jun 2001 17:05:35 -0400
Looking for Solderability Test Service
Bev Christian
Wed, 13 Jun 2001 10:45:40 -0400
Re: New Domain
Bev Christian
Wed, 20 Jun 2001 10:03:00 -0400
Re: New Domain - Red faced, AGAIN!
Bev Christian
Wed, 20 Jun 2001 10:05:00 -0400
New Sender Bill Butman
BGA Max temps & times?
Bill Butman
Mon, 11 Jun 2001 11:58:29 -0700
New Sender Bill Davis
SMT Glue Dispense
Bill Davis
Fri, 22 Jun 2001 09:59:12 EDT
New Sender Bill Decray
Board Thickness
Bill Decray
Tue, 19 Jun 2001 08:19:17 -0400
New Sender Bissonnette, Jean-Francois
Conformal coating: white haze
Bissonnette, Jean-Francois
Mon, 18 Jun 2001 11:35:50 -0400
Re: Conformal coating: white haze
Bissonnette, Jean-Francois
Tue, 19 Jun 2001 12:53:38 -0400
Re: Measling...
Bissonnette, Jean-Francois
Tue, 5 Jun 2001 13:16:12 -0400
MIL-STD-454
Bissonnette, Jean-Francois
Tue, 19 Jun 2001 12:56:31 -0400
Re: MIL-STD-454
Bissonnette, Jean-Francois
Tue, 19 Jun 2001 13:53:54 -0400
New Sender Bogdan Gabi
Re: "Touchy" Question...
Bogdan Gabi
Tue, 19 Jun 2001 11:35:18 +0300
Re: Board Thickness
Bogdan Gabi
Tue, 19 Jun 2001 16:22:48 +0300
New Sender Bolis Bortolo BB PCBDesign
How to design a PCB with buried resistors
Bolis Bortolo BB PCBDesign
Wed, 20 Jun 2001 00:04:32 +0200
New Sender Brad Saunders
Re: Multiple Thermal Stress
Brad Saunders
Wed, 27 Jun 2001 08:25:53 EDT
New Sender Brian Ellis
Re: Arbitration Clauses
Brian Ellis
Wed, 20 Jun 2001 09:44:32 +0300
Re: clean air
Brian Ellis
Fri, 15 Jun 2001 15:57:05 +0300
Re: Cleaning of assemblies after hand soldering
Brian Ellis
Thu, 7 Jun 2001 18:26:31 +0300
Re: Cleaning of assemblies after hand soldering
Brian Ellis
Thu, 7 Jun 2001 18:27:17 +0300
Re: Conformal coating
Brian Ellis
Thu, 28 Jun 2001 12:59:16 +0300
Re: Conformal coating or not ?
Brian Ellis
Tue, 12 Jun 2001 17:48:53 +0300
Re: ESD & Unsealed Concrete
Brian Ellis
Tue, 12 Jun 2001 09:22:32 +0300
Re: ESD & Unsealed Concrete
Brian Ellis
Tue, 12 Jun 2001 17:40:22 +0300
Re: How do you reflow?
Brian Ellis
Wed, 27 Jun 2001 19:40:32 +0300
Re: How do you reflow?
Brian Ellis
Thu, 28 Jun 2001 14:17:48 +0300
Re: Its too darn hot to work
Brian Ellis
Tue, 26 Jun 2001 11:09:30 +0300
Re: Looking for current carrying capacity of vias.
Brian Ellis
Fri, 22 Jun 2001 16:19:05 +0300
Re: Minimum requirements for final rinse in assembled boards
Brian Ellis
Tue, 5 Jun 2001 21:44:07 +0300
Re: Moisture Barrier Bag WVTR
Brian Ellis
Sat, 2 Jun 2001 16:40:48 +0300
Re: Silicon Conformal Coatings
Brian Ellis
Fri, 15 Jun 2001 11:32:43 +0300
Re: [LF] FT Article
Brian Ellis
Mon, 11 Jun 2001 15:51:42 +0300
Re: [LF] FT Article
Brian Ellis
Tue, 12 Jun 2001 09:26:48 +0300
New Sender Brian L. Guidi
Packaging Assistance...Bag & Tag
Brian L. Guidi
Mon, 18 Jun 2001 15:41:52 -0400
New Sender Brian McCrory
Re: Electroplating coating for Metallographic Preparation
Brian McCrory
Wed, 6 Jun 2001 08:57:41 -0700
New Sender Brocious, Dave A
stitch bars on double-sided boards
Brocious, Dave A
Wed, 20 Jun 2001 12:20:01 -0400
New Sender Bruce Bryla
Immersion Silver
Bruce Bryla
Fri, 29 Jun 2001 05:41:09 -0500
New Sender Busko, Wolfgang
AW: [TN] Cotton Gloves/Finger Cots
Busko, Wolfgang
Fri, 1 Jun 2001 15:33:18 +0200
AW: [TN] Surface Mount Reverse/Back mount LED
Busko, Wolfgang
Tue, 26 Jun 2001 16:21:31 +0200
New Sender C. Jeffrey Char
ERP Recommendations
C. Jeffrey Char
Wed, 13 Jun 2001 07:32:01 +0900
New Sender Campbell, William (wcampbel)
Re: "Touchy" Question...
Campbell, William (wcampbel)
Tue, 19 Jun 2001 09:08:14 -0400
Re: clean air
Campbell, William (wcampbel)
Mon, 18 Jun 2001 08:35:23 -0400
Re: FW: dispensing glue
Campbell, William (wcampbel)
Thu, 21 Jun 2001 09:21:12 -0400
Re: Glue Nozzle Cleaning
Campbell, William (wcampbel)
Mon, 18 Jun 2001 10:53:15 -0400
jump score, anyone?
Campbell, William (wcampbel)
Tue, 12 Jun 2001 12:56:04 -0400
Re: Multilayer Ceramic Chip Capacitors Quality
Campbell, William (wcampbel)
Tue, 26 Jun 2001 14:20:44 -0400
Re: Semiconductor Experts
Campbell, William (wcampbel)
Wed, 13 Jun 2001 08:55:32 -0400
New Sender Carl Ray
Re:
Carl Ray
Thu, 21 Jun 2001 09:14:23 -0500
New Sender Carroll, George
Re: Conformal coating
Carroll, George
Wed, 27 Jun 2001 13:30:42 -0400
New Sender Charles Lawson
Re: Measling...
Charles Lawson
Tue, 5 Jun 2001 16:41:04 -0400
Re: Separation Guidelines For PCB Traces Running Under Components
Charles Lawson
Fri, 8 Jun 2001 08:22:32 -0400
New Sender Chris Gifford
Re:
Chris Gifford
Thu, 21 Jun 2001 13:20:31 -0400
Re: High speed paste dispensing
Chris Gifford
Wed, 13 Jun 2001 14:08:24 -0400
Re: High speed paste dispensing
Chris Gifford
Thu, 14 Jun 2001 07:57:10 -0400
New Sender Chuck Brummer
Re: Delamination Blisters...
Chuck Brummer
Tue, 19 Jun 2001 08:33:33 -0700
Re: Moisture Absorption & Plasma Desmear
Chuck Brummer
Mon, 4 Jun 2001 14:35:09 -0700
Re: Process Validation
Chuck Brummer
Fri, 22 Jun 2001 10:49:47 -0700
New Sender Chuck Garth
Circuit Board Disposal
Chuck Garth
Thu, 28 Jun 2001 14:13:19 EDT
New Sender Clive ffitch
Test - please ignore
Clive ffitch
Tue, 12 Jun 2001 17:59:50 +0100
New Sender Cormac MacMahon
**** PCB's - HASL -v- OSP
Cormac MacMahon
Thu, 28 Jun 2001 17:56:46 +0100
New Sender Craig Hillman
How do you reflow?
Craig Hillman
Wed, 27 Jun 2001 10:28:10 -0400
Looking for a "special" solder paste dispenser
Craig Hillman
Mon, 11 Jun 2001 08:05:50 -0400
Re: Multilayer Ceramic Chip Capacitors Quality
Craig Hillman
Wed, 27 Jun 2001 10:58:13 -0400
Re: stitch bars on double-sided boards
Craig Hillman
Thu, 28 Jun 2001 10:14:06 -0400
Re: thermal-cycling guidelines
Craig Hillman
Wed, 27 Jun 2001 11:08:14 -0400
Re: voids in BGA, but really reliability in general
Craig Hillman
Fri, 8 Jun 2001 15:37:54 -0400
New Sender Crepeau, Phil
Re: "Touchy" Question...
Crepeau, Phil
Tue, 19 Jun 2001 07:33:56 -0700
Re: Cleaning of assemblies after hand soldering
Crepeau, Phil
Thu, 7 Jun 2001 07:21:21 -0700
Re: Conformal coating
Crepeau, Phil
Wed, 27 Jun 2001 10:20:51 -0700
Re: Conformal coating: white haze
Crepeau, Phil
Mon, 18 Jun 2001 11:46:09 -0700
Re: Electroplating coating for Metallographic Preparation
Crepeau, Phil
Wed, 6 Jun 2001 07:08:29 -0700
Re: Hot Bar Soldering
Crepeau, Phil
Thu, 21 Jun 2001 11:56:46 -0700
Re: In-line Cleaner
Crepeau, Phil
Wed, 27 Jun 2001 11:16:41 -0700
Re: In-line Cleaner
Crepeau, Phil
Wed, 27 Jun 2001 15:23:33 -0700
New Sender Creswick, Steven
Re: Component F/A continues with more ugly pics
Creswick, Steven
Wed, 13 Jun 2001 07:42:13 -0400
Re: Its too darn hot to work
Creswick, Steven
Mon, 25 Jun 2001 18:49:22 -0400
Re: Looking for a "special" solder paste dispenser
Creswick, Steven
Mon, 11 Jun 2001 12:26:22 -0400
Re: Multilayer Ceramic Chip Capacitors Quality
Creswick, Steven
Tue, 26 Jun 2001 13:02:27 -0400
Re: SOLDER FOIL
Creswick, Steven
Mon, 4 Jun 2001 16:07:57 -0400
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Creswick, Steven
Wed, 6 Jun 2001 08:17:07 -0400
New Sender D.Terstegge
Re: 0201 land pattern and stencil successes, failures and recommendat ions
D.Terstegge
Mon, 11 Jun 2001 21:05:02 +0200
Tips and Tricks
D.Terstegge
Sun, 10 Jun 2001 11:22:55 +0200
New Sender Darrel Therriault
Re: ICT Specifications.
Darrel Therriault
Mon, 18 Jun 2001 08:20:02 -0700
Re: Immersion Silver
Darrel Therriault
Fri, 29 Jun 2001 09:02:24 -0700
New Sender David Douthit
Re: "Touchy" Question...
David Douthit
Mon, 18 Jun 2001 22:10:24 -0700
Re: Black Pad...
David Douthit
Wed, 27 Jun 2001 13:16:31 -0700
Re: Conformal coating
David Douthit
Wed, 27 Jun 2001 13:18:41 -0700
Re: Ok conformal coating, but how ?
David Douthit
Tue, 12 Jun 2001 22:16:11 -0700
Re: Ok conformal coating, but how ?
David Douthit
Wed, 13 Jun 2001 22:49:37 -0700
Re: X-ray Images
David Douthit
Wed, 13 Jun 2001 19:00:07 -0700
New Sender David Fish
Re: ISO 9000-2000 "Handbook"
David Fish
Wed, 20 Jun 2001 21:31:33 -0700
Re: J-STD-002 and -003 solderability testing...
David Fish
Sat, 30 Jun 2001 11:41:13 -0700
Re: TRI reporting...
David Fish
Wed, 20 Jun 2001 18:54:48 -0700
New Sender David Hillman
Component Underfill Material Search
David Hillman
Tue, 12 Jun 2001 16:35:25 -0500
Re: Electroplating coating for Metallographic Preparation
David Hillman
Wed, 6 Jun 2001 10:42:15 -0500
Re: Immersion silver boards tarnish
David Hillman
Wed, 6 Jun 2001 11:34:02 -0500
Re: Low Temp Solder with Bismuth??
David Hillman
Fri, 8 Jun 2001 15:25:46 -0500
New Sender David Suraski
Re: Conformal coating
David Suraski
Wed, 27 Jun 2001 13:40:24 -0400
thermal-cycling guidelines
David Suraski
Tue, 26 Jun 2001 15:46:13 -0400
New Sender Dieselberg, Ron
Re: MIL-STD-454
Dieselberg, Ron
Tue, 19 Jun 2001 14:50:21 -0400
Re: QA Note
Dieselberg, Ron
Wed, 20 Jun 2001 12:53:58 -0400
Re: Shelf life of non-component materials
Dieselberg, Ron
Wed, 20 Jun 2001 12:30:54 -0400
New Sender Dorothy M. Lush
Re: Dumb question
Dorothy M. Lush
Thu, 28 Jun 2001 18:00:32 -0500
Re: Unusual Cleaning Operation- Help!
Dorothy M. Lush
Thu, 28 Jun 2001 20:21:35 -0500
New Sender Doty, Mike
Re: "Touchy" Question...
Doty, Mike
Tue, 19 Jun 2001 21:49:24 -0400
Re: Circuit Board Disposal
Doty, Mike
Thu, 28 Jun 2001 14:50:16 -0400
New Sender Douglas Pauls
Re: ATTN: No Clean Solder Users
Douglas Pauls
Thu, 14 Jun 2001 12:13:07 -0500
Coating and Coates Mask
Douglas Pauls
Tue, 5 Jun 2001 16:39:49 -0500
Re: Cotton Gloves/Finger Cots
Douglas Pauls
Fri, 1 Jun 2001 07:58:43 -0500
Re: Minimum requirements for final rinse in assembled boards
Douglas Pauls
Tue, 5 Jun 2001 12:41:29 -0500
Re: Talcum powder on wires
Douglas Pauls
Thu, 7 Jun 2001 07:25:45 -0500
New Sender DUTTON Phil
Re: Conformal coating: white haze
DUTTON Phil
Tue, 19 Jun 2001 10:20:33 +1000
New Sender Dwight Mattix
Re: Delamination Blisters...
Dwight Mattix
Mon, 18 Jun 2001 17:19:13 -0700
Re: Stress screening of bare PCBs
Dwight Mattix
Mon, 11 Jun 2001 18:50:47 -0700
New Sender Earl Moon
Component F/A continues with more ugly pics
Earl Moon
Tue, 12 Jun 2001 15:25:53 -0500
Semiconductor Experts
Earl Moon
Wed, 13 Jun 2001 04:32:36 -0500
UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Earl Moon
Tue, 5 Jun 2001 16:37:40 -0500
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Earl Moon
Wed, 6 Jun 2001 05:41:27 -0500
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Earl Moon
Thu, 7 Jun 2001 00:48:49 -0500
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Earl Moon
Thu, 7 Jun 2001 05:38:41 -0500
Re: X-ray Images
Earl Moon
Wed, 13 Jun 2001 15:20:51 -0500
New Sender Ed Cosper
Re: "Touchy" Question...
Ed Cosper
Tue, 19 Jun 2001 07:25:05 -0400
Re: ICT calibration
Ed Cosper
Fri, 22 Jun 2001 16:59:54 -0400
New Sender Ed Popielarski
RCA Microemulator
Ed Popielarski
Fri, 22 Jun 2001 12:02:02 -0700
New Sender Ed Valentine
Re: No Clean and Rosin core on same PCB
Ed Valentine
Tue, 19 Jun 2001 10:41:39 -0400
Re: TRI reporting...
Ed Valentine
Tue, 19 Jun 2001 22:50:10 -0400
New Sender Ellsworth D. Berkowitz
Re: Package reliabilty...
Ellsworth D. Berkowitz
Fri, 1 Jun 2001 15:45:29 -0500
New Sender Eric Christison
Re: Copper Plating Aluminum
Eric Christison
Fri, 29 Jun 2001 10:33:10 -0500
Re: SMT Glue Dispense
Eric Christison
Fri, 22 Jun 2001 09:36:41 -0500
New Sender Eric Dawson
Re: Glue Nozzle Cleaning
Eric Dawson
Mon, 18 Jun 2001 16:33:27 +0100
New Sender Fernando Gómez
<No subject>
Fernando Gómez
Mon, 18 Jun 2001 16:58:15 +0200
New Sender Francois Monette
Re: Moisture Sensitive Components
Francois Monette
Fri, 1 Jun 2001 09:19:17 -0400
Moisture Sensitive Components
Francois Monette
Fri, 1 Jun 2001 09:45:44 -0400
New Sender Frank Kimmey
Re: Multilayer Ceramic Chip Capacitors Quality
Frank Kimmey
Tue, 26 Jun 2001 09:13:51 -0700
Re: Multilayer Ceramic Chip Capacitors Quality
Frank Kimmey
Tue, 26 Jun 2001 11:38:41 -0700
New Sender Furrow, Robert Gordon (Bob)
Re: **** PCB's - HASL -v- OSP
Furrow, Robert Gordon (Bob)
Fri, 29 Jun 2001 09:03:30 -0400
Re: Immersion Silver
Furrow, Robert Gordon (Bob)
Fri, 29 Jun 2001 09:20:45 -0400
New Sender Gabriela Bogdan
Ni thickness
Gabriela Bogdan
Tue, 5 Jun 2001 00:10:39 +0300
Re: Ni thickness
Gabriela Bogdan
Tue, 5 Jun 2001 09:07:43 +0300
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Gabriela Bogdan
Wed, 6 Jun 2001 09:34:09 +0300
New Sender Galang, Jerry
Re: AW: [TN] Surface Mount Reverse/Back mount LED
Galang, Jerry
Tue, 26 Jun 2001 08:34:10 -0700
Re: Spacing between SMT components?
Galang, Jerry
Tue, 12 Jun 2001 09:29:54 -0700
New Sender Gary Ferrari
SNEC mtg
Gary Ferrari
Mon, 18 Jun 2001 12:55:42 EDT
Re: Thermal Relief
Gary Ferrari
Tue, 5 Jun 2001 20:13:27 EDT
New Sender Gary McCauley
Re: **** PCB's - HASL -v- OSP
Gary McCauley
Fri, 29 Jun 2001 08:22:49 -0500
New Sender Genny Gibbard
Re: Multilayer Ceramic Chip Capacitors Quality
Genny Gibbard
Tue, 26 Jun 2001 10:08:06 -0600
No Clean and Rosin core on same PCB
Genny Gibbard
Mon, 18 Jun 2001 11:24:57 -0600
Re: No Clean and Rosin core on same PCB
Genny Gibbard
Tue, 19 Jun 2001 14:32:04 -0600
New Sender gleason
Re: Circuit Board Disposal
gleason
Thu, 28 Jun 2001 13:29:00 -0700
Re: Dual Side Reflow with A Pallet
gleason
Wed, 13 Jun 2001 09:22:53 -0700
Re: Looking for a "special" solder paste dispenser
gleason
Mon, 11 Jun 2001 10:35:20 -0700
Re: solder mask tables
gleason
Mon, 11 Jun 2001 10:32:25 -0700
Re: Universal fixtures
gleason
Fri, 15 Jun 2001 08:37:06 -0700
New Sender Goldman, Patricia J.
Re: Industry Indicators
Goldman, Patricia J.
Mon, 11 Jun 2001 14:55:58 -0400
New Sender Graham Collins
Re: Marking
Graham Collins
Mon, 25 Jun 2001 09:32:20 -0400
New Sender Graham Naisbitt
Re: A solution to white residues after smt rework ...
Graham Naisbitt
Wed, 13 Jun 2001 15:44:58 +0100
Double Postings
Graham Naisbitt
Fri, 29 Jun 2001 17:16:48 +0100
Its too darn hot to work
Graham Naisbitt
Mon, 25 Jun 2001 23:26:54 +0100
Re: Ok conformal coating, but how ?
Graham Naisbitt
Wed, 13 Jun 2001 15:32:39 +0100
Re: Ok conformal coating, but how ?
Graham Naisbitt
Wed, 13 Jun 2001 15:32:42 +0100
Re: Ok conformal coating, but how ?
Graham Naisbitt
Thu, 14 Jun 2001 10:46:08 +0100
Re: Silicon Conformal Coatings
Graham Naisbitt
Fri, 15 Jun 2001 18:49:54 +0100
Thanks for the HOT tips
Graham Naisbitt
Tue, 26 Jun 2001 18:02:36 +0100
New Sender Gregg Klawson
Soldering socket pin on BGA pads - reliable?
Gregg Klawson
Wed, 6 Jun 2001 10:44:04 -0400
New Sender Guenter Grossmann
Antw: [TN] UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Guenter Grossmann
Thu, 7 Jun 2001 09:39:05 +0200
Re: Antw: [TN] voids in BGA
Guenter Grossmann
Wed, 6 Jun 2001 12:35:28 +0200
New Sender Guy Ramsey
Re: A solution to white residues after smt rework ...
Guy Ramsey
Wed, 13 Jun 2001 10:33:53 -0400
Re: Bare board shelf Life
Guy Ramsey
Wed, 20 Jun 2001 07:28:42 -0400
Re: Marking
Guy Ramsey
Mon, 25 Jun 2001 09:13:50 -0400
Re: Multilayer Ceramic Chip Capacitors Quality
Guy Ramsey
Tue, 26 Jun 2001 13:05:45 -0400
Re: Process Validation
Guy Ramsey
Fri, 22 Jun 2001 13:13:35 -0400
FW: [TN] Exposed copper
Guy Ramsey
Fri, 1 Jun 2001 17:09:25 -0400
New Sender Hann Pang
Industry Indicators
Hann Pang
Mon, 11 Jun 2001 13:32:57 -0500
Re: JEDEK Compliancy?
Hann Pang
Wed, 20 Jun 2001 11:08:22 -0500
Re: Thin Thermal Pad Materials
Hann Pang
Fri, 8 Jun 2001 08:11:48 -0500
New Sender Hans Hinners
Re: In-line Cleaner
Hans Hinners
Wed, 27 Jun 2001 11:19:27 -0700
Re: Manual inspection related stuff
Hans Hinners
Mon, 4 Jun 2001 15:58:49 -0700
Moisture Absorption & Plasma Desmear
Hans Hinners
Mon, 4 Jun 2001 14:04:56 -0700
Re: Moisture Absorption & Plasma Desmear
Hans Hinners
Mon, 4 Jun 2001 16:01:52 -0700
New Sender Hans Shin
Re: MIL-STD-454
Hans Shin
Tue, 19 Jun 2001 10:13:24 -0700
New Sender Hollandsworth, Ron
Re: : BGA Inspection
Hollandsworth, Ron
Tue, 19 Jun 2001 13:07:21 -0500
Re [TN]: PCB Material
Hollandsworth, Ron
Wed, 27 Jun 2001 14:08:41 -0500
RE [TN}: Correction In-Line Cleaner
Hollandsworth, Ron
Wed, 27 Jun 2001 14:05:55 -0500
Re: [TN} In-Line Cleaners
Hollandsworth, Ron
Wed, 27 Jun 2001 13:57:30 -0500
New Sender Howard Watson
Re:
Howard Watson
Thu, 21 Jun 2001 11:58:27 -0400
New Sender Ingemar Hernefjord (EMW)
Re: cracking GaAs dice
Ingemar Hernefjord (EMW)
Tue, 19 Jun 2001 12:57:13 +0200
Re: Looking for a "special" solder paste dispenser
Ingemar Hernefjord (EMW)
Tue, 12 Jun 2001 14:58:11 +0200
Re: Package reliabilty...
Ingemar Hernefjord (EMW)
Tue, 5 Jun 2001 12:27:07 +0200
Re: Package reliabilty...
Ingemar Hernefjord (EMW)
Fri, 8 Jun 2001 15:11:07 +0200
Re: Silicon Conformal Coatings
Ingemar Hernefjord (EMW)
Fri, 15 Jun 2001 11:37:42 +0200
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Ingemar Hernefjord (EMW)
Wed, 6 Jun 2001 09:14:29 +0200
Re: X-ray Images
Ingemar Hernefjord (EMW)
Fri, 15 Jun 2001 10:20:17 +0200
New Sender Jack Crawford
Re: 620
Jack Crawford
Mon, 18 Jun 2001 19:08:16 -0500
Re: IPC-D-275
Jack Crawford
Mon, 18 Jun 2001 19:02:46 -0500
Make your hotel reservations now for APEX 2002
Jack Crawford
Tue, 5 Jun 2001 16:36:28 -0500
Re: Spacers
Jack Crawford
Wed, 20 Jun 2001 18:13:49 -0500
Re: thermal-cycling guidelines
Jack Crawford
Wed, 27 Jun 2001 12:35:14 -0500
Re: Update on TRI Lead Rule
Jack Crawford
Wed, 20 Jun 2001 17:18:28 -0500
New Sender James Tingey
ATTN: No Clean Solder Users
James Tingey
Thu, 14 Jun 2001 10:47:56 -0500
New Sender Jana L. Carraway
Looking for Larry Fisher
Jana L. Carraway
Wed, 20 Jun 2001 10:34:03 -0700
New Sender Jason Gregory
Re:
Jason Gregory
Thu, 21 Jun 2001 08:26:49 -0500
Re: BGA Xray Inspection: 100% or SPC controlled
Jason Gregory
Tue, 19 Jun 2001 12:29:03 -0500
Re: Hand Soldering 0201 and 0402 components
Jason Gregory
Wed, 6 Jun 2001 12:03:04 -0500
Re: How do you reflow?
Jason Gregory
Wed, 27 Jun 2001 10:51:45 -0500
Re: In-line Cleaner
Jason Gregory
Wed, 27 Jun 2001 13:02:59 -0500
Re: Solder Paste Dispenser
Jason Gregory
Thu, 21 Jun 2001 07:52:24 -0500
Re: Solder Paste Dispenser
Jason Gregory
Thu, 21 Jun 2001 08:22:52 -0500
Universal fixtures
Jason Gregory
Fri, 15 Jun 2001 07:42:26 -0500
New Sender Jason Larson, AScT
Talcum powder on wires
Jason Larson, AScT
Wed, 6 Jun 2001 13:15:54 -0700
New Sender Jerry Mosur
Hole size
Jerry Mosur
Fri, 1 Jun 2001 09:09:56 -0400
New Sender Jiang Ping
Re: Dual Side Reflow with A Pallet
Jiang Ping
Wed, 13 Jun 2001 13:57:34 +0800
New Sender John Brewer
Steve's note about lead reporting
John Brewer
Wed, 20 Jun 2001 13:13:40 -0400
TN] FW: dispensing glue
John Brewer
Thu, 21 Jun 2001 11:56:26 -0400
New Sender John Fahey
Capacitor Values drifting after temperature cycling
John Fahey
Wed, 13 Jun 2001 10:45:55 -0500
JEDEK Compliancy?
John Fahey
Wed, 20 Jun 2001 10:12:46 -0500
JEDEK trays
John Fahey
Wed, 20 Jun 2001 08:12:26 -0700
Tape and Reel Standards
John Fahey
Tue, 26 Jun 2001 11:54:12 -0500
New Sender Jon Moore
Re:
Jon Moore
Thu, 21 Jun 2001 14:31:00 EDT
Re: Circuit Board Disposal
Jon Moore
Thu, 28 Jun 2001 14:39:34 EDT
Re: Conformal coating or not ?
Jon Moore
Tue, 12 Jun 2001 18:10:13 EDT
Re: Dross reclaim
Jon Moore
Thu, 28 Jun 2001 14:42:14 EDT
Re: Glue Nozzle Cleaning
Jon Moore
Mon, 18 Jun 2001 15:03:22 EDT
Re: Hand Soldering 0201 and 0402 components
Jon Moore
Wed, 6 Jun 2001 12:20:43 EDT
Re: In-line Cleaner
Jon Moore
Wed, 27 Jun 2001 18:27:57 EDT
Re: Looking for a "special" solder paste dispenser
Jon Moore
Tue, 12 Jun 2001 17:52:32 EDT
Re: Ok conformal coating, but how ?
Jon Moore
Tue, 12 Jun 2001 18:12:35 EDT
Re: Silicon Conformal Coatings
Jon Moore
Fri, 15 Jun 2001 11:15:40 EDT
Re: SMT Glue Dispense
Jon Moore
Mon, 25 Jun 2001 11:34:35 EDT
Re: Universal fixtures
Jon Moore
Fri, 15 Jun 2001 11:22:23 EDT
New Sender Jonathan A Noquil
Re: Cooling Rates
Jonathan A Noquil
Thu, 28 Jun 2001 19:40:48 +0800
Re: Copper Plating Aluminum
Jonathan A Noquil
Fri, 29 Jun 2001 14:26:53 +0800
New Sender Jorge Santana
Conformal coating or not ?
Jorge Santana
Tue, 12 Jun 2001 09:01:23 -0500
Re: Glue Nozzle Cleaning
Jorge Santana
Mon, 18 Jun 2001 11:03:25 -0500
Ok conformal coating, but how ?
Jorge Santana
Tue, 12 Jun 2001 11:43:23 -0500
New Sender Joseph Keary
Re: Choice of PWB substrate for "oil bath" operation
Joseph Keary
Wed, 27 Jun 2001 11:29:41 -0700
Re: Re [TN]: PCB Material
Joseph Keary
Thu, 28 Jun 2001 09:50:06 -0700
New Sender Joseph Ng
Multiple Thermal Stress
Joseph Ng
Wed, 27 Jun 2001 19:31:21 +0800
Warp Vs laminate thickness variation in a panel
Joseph Ng
Wed, 6 Jun 2001 00:27:53 -0500
New Sender Joyce Koo
Re: "Touchy" Question...
Joyce Koo
Tue, 19 Jun 2001 08:43:02 -0400
Re: Measling...
Joyce Koo
Tue, 5 Jun 2001 08:34:53 -0400
Re: Measling...
Joyce Koo
Tue, 5 Jun 2001 10:12:58 -0400
Re: New Domain - Red faced, AGAIN!
Joyce Koo
Wed, 20 Jun 2001 10:59:56 -0400
Re: Thin Thermal Pad Materials
Joyce Koo
Fri, 8 Jun 2001 08:24:07 -0400
New Sender Julien Bouchard
Feedback wanted on Registred Instructor IPC-7711/7721 training
Julien Bouchard
Mon, 11 Jun 2001 11:42:53 -0400
New Sender Kane, Joseph
Hi-Temp Masking Tape
Kane, Joseph
Fri, 22 Jun 2001 08:23:31 -0400
New Sender Kasprzak, Bill (sys) USX
Re: High speed paste dispensing
Kasprzak, Bill (sys) USX
Wed, 13 Jun 2001 13:34:28 -0400
Re: Its too darn hot to work
Kasprzak, Bill (sys) USX
Tue, 26 Jun 2001 09:43:02 -0400
Re: Looking for a "special" solder paste dispenser
Kasprzak, Bill (sys) USX
Tue, 12 Jun 2001 07:36:21 -0400
Re: SMT adhesive
Kasprzak, Bill (sys) USX
Tue, 19 Jun 2001 09:56:44 -0400
Re: Spacers
Kasprzak, Bill (sys) USX
Thu, 21 Jun 2001 07:37:09 -0400
New Sender Kathy Bergman
Re: "Touchy" Question...
Kathy Bergman
Tue, 19 Jun 2001 17:36:52 -0700
alternative oxide
Kathy Bergman
Wed, 6 Jun 2001 13:13:17 -0500
Re: Laser Drill
Kathy Bergman
Mon, 4 Jun 2001 11:21:57 -0700
New Sender Kathy Kuhlow
Re: "Touchy" Question...
Kathy Kuhlow
Tue, 19 Jun 2001 08:54:46 -0500
Re: A solution to white residues after smt rework ...
Kathy Kuhlow
Wed, 13 Jun 2001 14:58:26 -0500
Re: BGA
Kathy Kuhlow
Thu, 28 Jun 2001 13:09:30 -0500
Re: Delamination Blisters...
Kathy Kuhlow
Mon, 18 Jun 2001 14:01:32 -0500
Re: Exposed copper
Kathy Kuhlow
Fri, 1 Jun 2001 14:02:33 -0500
Re: ICT Specifications.
Kathy Kuhlow
Fri, 15 Jun 2001 10:42:57 -0500
Re: ISO 9000-2000 "Handbook"
Kathy Kuhlow
Mon, 18 Jun 2001 11:40:59 -0500
Re: Looking for a "special" solder paste dispenser
Kathy Kuhlow
Mon, 11 Jun 2001 10:30:16 -0500
Re: Marking
Kathy Kuhlow
Mon, 25 Jun 2001 08:40:28 -0500
Re: Process Validation
Kathy Kuhlow
Fri, 22 Jun 2001 12:43:45 -0500
Re: Process Validation
Kathy Kuhlow
Fri, 22 Jun 2001 13:31:26 -0500
Re: SMT Glue Dispense
Kathy Kuhlow
Fri, 22 Jun 2001 09:37:56 -0500
New Sender Keith Calhoun
In-line Cleaner
Keith Calhoun
Wed, 27 Jun 2001 13:30:39 -0400
New Sender Ken Mc Gowan
Re: Immersion silver boards tarnish
Ken Mc Gowan
Wed, 6 Jun 2001 19:54:35 -0100
Re: Looking for a "special" solder paste dispenser
Ken Mc Gowan
Mon, 11 Jun 2001 16:59:10 -0100
Re: Sulfuric peroxide preplate microetch
Ken Mc Gowan
Thu, 14 Jun 2001 13:27:12 -0100
Re: [LF] FT Article
Ken Mc Gowan
Mon, 11 Jun 2001 17:03:00 -0100
New Sender Kevin Saillard
Solder Paste Dispenser
Kevin Saillard
Thu, 21 Jun 2001 15:14:11 +1000
New Sender Kiet Dang
Etching AuSn
Kiet Dang
Fri, 1 Jun 2001 11:15:48 -0700
New Sender Larry J. Fisher
Re: Which Solder Mask
Larry J. Fisher
Thu, 7 Jun 2001 21:12:50 EDT
New Sender Lee Whiteman
Re: Equivalent BS specs
Lee Whiteman
Sat, 2 Jun 2001 02:44:41 -0400
Re: ESD QUESTION
Lee Whiteman
Thu, 21 Jun 2001 23:01:41 -0400
Re: Hot Bar Soldering
Lee Whiteman
Fri, 22 Jun 2001 02:59:38 -0400
Re: Hot Plates
Lee Whiteman
Fri, 1 Jun 2001 23:04:11 -0400
Re: Looking for a "special" solder paste dispenser
Lee Whiteman
Tue, 12 Jun 2001 02:39:19 -0400
Re: Measling...
Lee Whiteman
Tue, 5 Jun 2001 21:44:16 -0400
Re: TRI reporting...
Lee Whiteman
Wed, 20 Jun 2001 20:54:32 -0400
New Sender Lefebvre, Scott
Dual Side Reflow with A Pallet
Lefebvre, Scott
Tue, 12 Jun 2001 17:26:55 -0500
Latest Info. using White Tin
Lefebvre, Scott
Fri, 8 Jun 2001 14:44:05 -0500
New Sender LI YUAN
BGA package warpage characterization
LI YUAN
Tue, 26 Jun 2001 12:08:27 -0600
New Sender Lim Yak Peng
Re: Conformal coating: white haze
Lim Yak Peng
Tue, 19 Jun 2001 08:57:42 +0800
New Sender Lon Weffers
clean air
Lon Weffers
Fri, 15 Jun 2001 12:35:19 +0200
FW: dispensing glue
Lon Weffers
Thu, 21 Jun 2001 14:49:34 +0200
New Sender Lou Hart
Re:
Lou Hart
Thu, 21 Jun 2001 13:52:39 -0400
Re: Capacitor Values drifting after temperature cycling
Lou Hart
Wed, 13 Jun 2001 12:42:20 -0400
Cleaning of assemblies after hand soldering
Lou Hart
Wed, 6 Jun 2001 17:09:04 -0400
ICT calibration
Lou Hart
Fri, 22 Jun 2001 16:15:16 -0400
Re: QA Note
Lou Hart
Wed, 20 Jun 2001 11:58:42 -0400
Re: Shelf life of non-component materials
Lou Hart
Wed, 20 Jun 2001 12:03:38 -0400
Spacers
Lou Hart
Wed, 20 Jun 2001 18:21:12 -0400
New Sender Luca Amato
Specs for components taping (polarity)
Luca Amato
Wed, 20 Jun 2001 03:51:52 -0400
New Sender Lush, Dorothy
Re: BGA
Lush, Dorothy
Thu, 28 Jun 2001 12:39:13 -0700
New Sender Mario Hernandez
Re: ATTN: No Clean Solder Users
Mario Hernandez
Thu, 14 Jun 2001 15:28:43 -0500
Re: Conformal coating
Mario Hernandez
Wed, 27 Jun 2001 12:56:14 -0500
New Sender Mark Charlton
Re: ICT calibration
Mark Charlton
Fri, 22 Jun 2001 18:09:28 -0400
New Sender Mark Orlowski
Re: Manual inspection related stuff
Mark Orlowski
Mon, 4 Jun 2001 15:35:42 -0500
New Sender mark simmons
Re: jump score, anyone?
mark simmons
Tue, 12 Jun 2001 10:28:18 -0700
New Sender Marsico, James
Re: BGA Xray Inspection: 100% or SPC controlled
Marsico, James
Tue, 19 Jun 2001 13:16:30 -0400
Re: Conformal coating: white haze
Marsico, James
Mon, 18 Jun 2001 13:54:58 -0400
ESD QUESTION
Marsico, James
Thu, 21 Jun 2001 10:13:10 -0400
flowing solder pot
Marsico, James
Wed, 20 Jun 2001 08:47:55 -0400
Re: flowing solder pot
Marsico, James
Wed, 20 Jun 2001 09:43:36 -0400
Re: How do you reflow?
Marsico, James
Wed, 27 Jun 2001 10:54:54 -0400
Re: In-line Cleaner
Marsico, James
Wed, 27 Jun 2001 13:55:15 -0400
Re: J-STD-002 and -003 solderability testing...
Marsico, James
Fri, 29 Jun 2001 13:46:07 -0400
Re: Laser Drill
Marsico, James
Mon, 4 Jun 2001 14:15:39 -0400
Re: Looking for Solderability Test Service
Marsico, James
Wed, 13 Jun 2001 12:40:14 -0400
Re: Ok conformal coating, but how ?
Marsico, James
Wed, 13 Jun 2001 07:01:08 -0400
Re: Shelf life of non-component materials
Marsico, James
Wed, 20 Jun 2001 12:48:43 -0400
SOLDER FOIL
Marsico, James
Mon, 4 Jun 2001 15:05:44 -0400
Re: SOLDER FOIL
Marsico, James
Mon, 4 Jun 2001 16:20:07 -0400
Re: Thin Thermal Pad Materials
Marsico, James
Mon, 11 Jun 2001 08:46:30 -0400
New Sender Martin Christie
"Paradigm" ERP software by Cimnet
Martin Christie
Thu, 28 Jun 2001 13:41:30 +0100
Re: A solution to white residues after smt rework ...
Martin Christie
Wed, 13 Jun 2001 17:09:53 +0100
Re: Hot Bar Soldering
Martin Christie
Fri, 22 Jun 2001 10:10:32 +0100
New Sender Mary Jane Chism
Exposed copper
Mary Jane Chism
Fri, 1 Jun 2001 11:31:33 -0500
New Sender Matthew Lamkin
RE: Looking for current carrying capacity of vias.
Matthew Lamkin
Fri, 22 Jun 2001 08:28:34 +0100
Spacing between SMT components?
Matthew Lamkin
Tue, 12 Jun 2001 10:23:08 +0100
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Matthew Lamkin
Wed, 6 Jun 2001 08:07:34 +0100
New Sender May William D (Dean) CNIN
Re: QA Note
May William D (Dean) CNIN
Wed, 20 Jun 2001 11:26:14 -0500
New Sender Mengers, William D.
Re:
Mengers, William D.
Thu, 21 Jun 2001 12:19:02 -0400
Re:
Mengers, William D.
Thu, 21 Jun 2001 12:25:14 -0400
<No subject>
Mengers, William D.
Thu, 21 Jun 2001 08:55:33 -0400
SMT adhesive
Mengers, William D.
Tue, 19 Jun 2001 09:03:26 -0400
Re: SMT adhesive
Mengers, William D.
Tue, 19 Jun 2001 11:40:43 -0400
Re: SMT Glue Dispense
Mengers, William D.
Fri, 22 Jun 2001 11:00:18 -0400
New Sender Michael Forrester
Surface Mount Reverse/Back mount LED
Michael Forrester
Mon, 25 Jun 2001 17:44:36 -0400
New Sender Michael Lester
solder mask tables
Michael Lester
Fri, 8 Jun 2001 18:00:38 EDT
New Sender michael
Re: ERP Recommendations
michael
Wed, 13 Jun 2001 10:35:49 +0800
New Sender Mike Di Giacomo
Re: Spacers
Mike Di Giacomo
Wed, 20 Jun 2001 18:50:00 -0400
New Sender Mike Fenner
Re:
Mike Fenner
Thu, 21 Jun 2001 16:15:39 +0100
Re: 0201 land pattern and stencil successes, failures and recommendat ions
Mike Fenner
Mon, 11 Jun 2001 13:22:54 +0100
Re: Antw: [TN] voids in BGA
Mike Fenner
Wed, 6 Jun 2001 12:26:16 +0100
Re: Conductive Paint......
Mike Fenner
Mon, 4 Jun 2001 08:51:00 +0100
Re: Looking for a "special" solder paste dispenser
Mike Fenner
Tue, 12 Jun 2001 08:46:42 +0100
Re: Looking for a "special" solder paste dispenser
Mike Fenner
Tue, 12 Jun 2001 13:19:14 +0100
Re: Low Temp Solder with Bismuth??
Mike Fenner
Mon, 11 Jun 2001 13:15:50 +0100
Re: No Clean and Rosin core on same PCB
Mike Fenner
Tue, 19 Jun 2001 13:37:51 +0100
Re: Semiconductor Experts
Mike Fenner
Wed, 13 Jun 2001 14:15:48 +0100
Re: [LF] FT Article
Mike Fenner
Mon, 11 Jun 2001 16:39:23 +0100
New Sender Misner, Bruce
Re: X-ray Images
Misner, Bruce
Wed, 13 Jun 2001 09:31:35 -0500
New Sender Nancy Reynolds/MKT/HQ/KEMET/US
Moisture Barrier Dry-Pack Requirements
Nancy Reynolds/MKT/HQ/KEMET/US
Thu, 7 Jun 2001 13:49:10 -0400
New Sender Nancy Trumbull
Dross reclaim
Nancy Trumbull
Thu, 28 Jun 2001 13:05:20 -0400
New Sender Neda Thrash
Re: ESD & Unsealed Concrete
Neda Thrash
Tue, 12 Jun 2001 08:34:59 -0500
Re: Feedback wanted on Registred Instructor IPC-7711/7721training
Neda Thrash
Mon, 11 Jun 2001 13:10:58 -0500
Re: Solder Technology International Webpage
Neda Thrash
Tue, 5 Jun 2001 16:05:07 -0500
New Sender Nicole Landreville
Multilayer Ceramic Chip Capacitors Quality
Nicole Landreville
Tue, 26 Jun 2001 11:36:41 -0400
Re: Multilayer Ceramic Chip Capacitors Quality
Nicole Landreville
Tue, 26 Jun 2001 13:10:07 -0400
New Sender Noble, Ed
Re: Measling...
Noble, Ed
Mon, 4 Jun 2001 16:41:24 -0400
New Sender Paul Brionez
Re: Board Thickness
Paul Brionez
Tue, 19 Jun 2001 07:44:50 -0500
New Sender Paul Gill
Hand Soldering 0201 and 0402 components
Paul Gill
Tue, 5 Jun 2001 14:06:20 -0700
New Sender Paul Klasek
High speed paste dispensing
Paul Klasek
Wed, 13 Jun 2001 17:11:32 +1000
Re: High speed paste dispensing
Paul Klasek
Thu, 14 Jun 2001 08:30:22 +1000
Re: High speed paste dispensing (with Indium)
Paul Klasek
Thu, 14 Jun 2001 10:58:30 +1000
New Sender Paul Ziarek
Re: Surface Mount Reverse/Back mount LED
Paul Ziarek
Tue, 26 Jun 2001 10:49:31 -0500
New Sender PERALTA, Kevin (BREA)
Re: Measling...
PERALTA, Kevin (BREA)
Tue, 5 Jun 2001 09:40:30 -0400
New Sender Peter Smith
Solderability shelf life
Peter Smith
Wed, 20 Jun 2001 10:24:29 -0400
New Sender Peter Swanson
Re: How do you reflow?
Peter Swanson
Wed, 27 Jun 2001 16:45:15 +0100
Re: Ok conformal coating, but how ?
Peter Swanson
Wed, 13 Jun 2001 16:52:52 +0100
Re: SMT adhesive
Peter Swanson
Tue, 19 Jun 2001 17:00:33 +0100
Re: Thanks for the HOT tips
Peter Swanson
Wed, 27 Jun 2001 16:40:50 +0100
New Sender Phil Bavaro
BGA Xray Inspection: 100% or SPC controlled
Phil Bavaro
Tue, 19 Jun 2001 10:01:20 -0700
New Sender Phil Nutting
Choice of PWB substrate for "oil bath" operation
Phil Nutting
Wed, 27 Jun 2001 08:35:57 -0400
Re: ESD & Unsealed Concrete
Phil Nutting
Mon, 11 Jun 2001 15:04:22 -0400
Re: Hi-Temp Masking Tape
Phil Nutting
Fri, 22 Jun 2001 08:52:10 -0400
ISO 9000-2000 "Handbook"
Phil Nutting
Mon, 18 Jun 2001 10:32:38 -0400
Re: Minimum requirements for final rinse in assembled boards
Phil Nutting
Tue, 5 Jun 2001 13:13:13 -0400
Process Validation
Phil Nutting
Fri, 22 Jun 2001 13:01:30 -0400
Shelf life of non-component materials
Phil Nutting
Wed, 20 Jun 2001 11:00:28 -0400
Re: SMT Glue Dispense
Phil Nutting
Fri, 22 Jun 2001 10:13:22 -0400
Re: Spacers
Phil Nutting
Thu, 21 Jun 2001 08:12:31 -0400
Re: TRI reporting...
Phil Nutting
Wed, 20 Jun 2001 10:49:07 -0400
New Sender Phillip E. Hinton
Copper Plating Aluminum
Phillip E. Hinton
Fri, 29 Jun 2001 00:45:22 EDT
Re: Copper Plating Aluminum
Phillip E. Hinton
Fri, 29 Jun 2001 11:41:25 EDT
Sulfuric peroxide preplate microetch
Phillip E. Hinton
Tue, 12 Jun 2001 11:55:03 EDT
Re: Sulfuric peroxide preplate microetch
Phillip E. Hinton
Tue, 12 Jun 2001 18:26:36 EDT
New Sender PL
Oxidized copper pad
PL
Wed, 6 Jun 2001 12:41:57 -0700
New Sender Richard Hamilton
Re: "Touchy" Question...
Richard Hamilton
Mon, 18 Jun 2001 20:01:50 -0700
Re: Arbitration Clauses
Richard Hamilton
Wed, 20 Jun 2001 06:43:22 -0700
Re: Marking
Richard Hamilton
Mon, 25 Jun 2001 08:02:57 -0700
Re: Process Validation
Richard Hamilton
Fri, 22 Jun 2001 10:42:04 -0700
Re: Process Validation
Richard Hamilton
Fri, 22 Jun 2001 11:50:22 -0700
Re: Spacers
Richard Hamilton
Wed, 20 Jun 2001 16:05:14 -0700
New Sender Rick Babyak
Nelco laminate
Rick Babyak
Mon, 18 Jun 2001 14:19:09 -0400
New Sender Rick Howieson
620
Rick Howieson
Mon, 18 Jun 2001 10:30:50 -0600
BGA
Rick Howieson
Thu, 28 Jun 2001 11:36:54 -0600
Hot Plates
Rick Howieson
Fri, 1 Jun 2001 08:22:09 -0600
Marking
Rick Howieson
Mon, 25 Jun 2001 05:48:04 -0600
QA Note
Rick Howieson
Wed, 20 Jun 2001 09:35:08 -0600
Re: QA Note
Rick Howieson
Wed, 20 Jun 2001 10:31:23 -0600
New Sender Rick Thompson
Re: ESD & Unsealed Concrete
Rick Thompson
Mon, 11 Jun 2001 14:37:09 -0700
Low Temp Solder with Bismuth??
Rick Thompson
Fri, 8 Jun 2001 11:23:36 -0700
Solder Dross - So. Calif.??
Rick Thompson
Tue, 19 Jun 2001 13:25:42 -0700
New Sender Riling, James J
Separation Guidelines For PCB Traces Running Under Components
Riling, James J
Thu, 7 Jun 2001 15:09:01 -0400
New Sender Rob Day
Glue Nozzle Cleaning
Rob Day
Mon, 18 Jun 2001 07:08:36 -0500
New Sender Rod Smith
Rod Smith/Endicott/IBM is out of the office.
Rod Smith
Sat, 30 Jun 2001 11:49:15 -0400
New Sender Roger M. Stoops
Re: How do you reflow? (
Roger M. Stoops
Wed, 27 Jun 2001 12:40:18 -0400
Re: Process Validation
Roger M. Stoops
Fri, 22 Jun 2001 14:07:51 -0400
New Sender Roland Jaquet
Re: ERP Recommendations
Roland Jaquet
Wed, 13 Jun 2001 01:12:03 +0200
Re: MultiUser Software
Roland Jaquet
Mon, 4 Jun 2001 16:00:52 +0200
New Sender Ryan Grant
Re: Its too darn hot to work
Ryan Grant
Mon, 25 Jun 2001 18:00:45 -0600
Re: Package reliabilty...
Ryan Grant
Mon, 4 Jun 2001 15:39:45 -0600
New Sender Safavi-Bayat,Shahed
Re: Dumb question
Safavi-Bayat,Shahed
Fri, 29 Jun 2001 08:05:31 -0400
Re: Exposed copper
Safavi-Bayat,Shahed
Fri, 1 Jun 2001 13:49:28 -0400
MultiUser Software
Safavi-Bayat,Shahed
Mon, 4 Jun 2001 08:42:17 -0400
New Sender sahmad
Re: Antw: [TN] voids in BGA
sahmad
Tue, 5 Jun 2001 09:00:18 -0600
New Sender Sasha Miladinovic
Re: AW: [TN] Lifted components (MELF Cylindrical Diodes)
Sasha Miladinovic
Tue, 5 Jun 2001 07:09:21 -0500
Coating vs. UL-approval
Sasha Miladinovic
Tue, 19 Jun 2001 02:58:25 -0500
Re: Hand Soldering 0201 and 0402 components
Sasha Miladinovic
Wed, 6 Jun 2001 01:57:26 -0500
Re: SPC for PCB
Sasha Miladinovic
Tue, 5 Jun 2001 07:45:43 -0500
New Sender Sauer, Steven T.
Re: Measling...
Sauer, Steven T.
Tue, 5 Jun 2001 12:45:24 -0400
New Sender Shapira Motti
Freshness of Components
Shapira Motti
Mon, 25 Jun 2001 12:03:33 +0300
New Sender Shirley Xiao
Multiple Thermal Stress
Shirley Xiao
Tue, 26 Jun 2001 17:22:30 -0700
Multiple Thermal Stress
Shirley Xiao
Thu, 28 Jun 2001 17:05:41 -0700
New Sender Smith Russell PO US
Re: Its too darn hot to work
Smith Russell PO US
Tue, 26 Jun 2001 01:42:28 +0200
New Sender Steffen, Don E
WEIGHT GAIN TESTING
Steffen, Don E
Thu, 28 Jun 2001 08:15:11 -0500
New Sender Stephannie Caliendo
Symposium : July 16-21
Stephannie Caliendo
Fri, 29 Jun 2001 16:28:08 -0500
New Sender Stephen Brown
ICT Specifications.
Stephen Brown
Fri, 15 Jun 2001 14:58:45 +0100
New Sender Stephen R. Gregory
"Touchy" Question...
Stephen R. Gregory
Mon, 18 Jun 2001 22:14:02 EDT
Re: "Touchy" Question...
Stephen R. Gregory
Tue, 19 Jun 2001 21:31:36 EDT
Black Pad...
Stephen R. Gregory
Wed, 27 Jun 2001 15:20:09 EDT
Black Pad...
Stephen R. Gregory
Wed, 27 Jun 2001 15:38:41 EDT
Re: Circuit Board Disposal
Stephen R. Gregory
Thu, 28 Jun 2001 15:55:24 EDT
Re: Component F/A continues with more ugly pics
Stephen R. Gregory
Tue, 12 Jun 2001 17:13:01 EDT
Delamination Blisters...
Stephen R. Gregory
Mon, 18 Jun 2001 14:50:18 EDT
Re: Delamination Blisters...
Stephen R. Gregory
Mon, 18 Jun 2001 16:45:48 EDT
Re: Double Postings
Stephen R. Gregory
Fri, 29 Jun 2001 12:26:50 EDT
Earls latest picture...
Stephen R. Gregory
Thu, 7 Jun 2001 12:34:01 EDT
Re: Glue Nozzle Cleaning
Stephen R. Gregory
Mon, 18 Jun 2001 09:49:37 EDT
Re: How do you reflow?
Stephen R. Gregory
Wed, 27 Jun 2001 13:59:30 EDT
Re: Industry Indicators
Stephen R. Gregory
Mon, 11 Jun 2001 15:10:05 EDT
Re: Its too darn hot to work
Stephen R. Gregory
Mon, 25 Jun 2001 20:23:20 EDT
Re: Its too darn hot to work, a webpage...
Stephen R. Gregory
Mon, 25 Jun 2001 22:47:36 EDT
J-STD-002 and -003 solderability testing...
Stephen R. Gregory
Fri, 29 Jun 2001 11:20:08 EDT
Re: Looking for a "special" solder paste dispenser
Stephen R. Gregory
Tue, 12 Jun 2001 08:45:19 EDT
Re: Looking for Solderability Test Service
Stephen R. Gregory
Wed, 13 Jun 2001 15:32:44 EDT
Re: Low Temp Solder with Bismuth??
Stephen R. Gregory
Fri, 8 Jun 2001 15:52:59 EDT
Re: Manual inspection related stuff
Stephen R. Gregory
Mon, 4 Jun 2001 17:15:38 EDT
Measling...
Stephen R. Gregory
Mon, 4 Jun 2001 14:58:03 EDT
Re: Measling...
Stephen R. Gregory
Tue, 5 Jun 2001 15:29:18 EDT
Re: Permanent Moisture Sensitivity Indicators?
Stephen R. Gregory
Thu, 7 Jun 2001 14:11:20 EDT
Re: SOLDER FOIL
Stephen R. Gregory
Mon, 4 Jun 2001 16:21:29 EDT
Re: Surface Mount Reverse/Back mount LED
Stephen R. Gregory
Tue, 26 Jun 2001 08:54:15 EDT
TRI reporting...
Stephen R. Gregory
Tue, 19 Jun 2001 19:45:08 EDT
Re: TRI reporting...
Stephen R. Gregory
Wed, 20 Jun 2001 00:00:46 EDT
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Stephen R. Gregory
Tue, 5 Jun 2001 18:31:59 EDT
Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED
Stephen R. Gregory
Tue, 5 Jun 2001 21:04:32 EDT
X-ray Images
Stephen R. Gregory
Wed, 13 Jun 2001 08:58:23 EDT
New Sender Stephen S. Schiera
Silicon Conformal Coatings
Stephen S. Schiera
Thu, 14 Jun 2001 17:52:20 -0500
New Sender Steve Abrahamson
Re: **** PCB's - HASL -v- OSP
Steve Abrahamson
Fri, 29 Jun 2001 09:15:47 -0600
Re: BGA Xray Inspection: 100% or SPC controlled
Steve Abrahamson
Tue, 19 Jun 2001 14:03:16 -0600
Re: FW: dispensing glue
Steve Abrahamson
Thu, 21 Jun 2001 09:39:01 -0600
Re: Dumb question
Steve Abrahamson
Fri, 29 Jun 2001 09:51:04 -0600
Re: Glue Nozzle Cleaning
Steve Abrahamson
Mon, 18 Jun 2001 10:55:19 -0600
Re: No Clean and Rosin core on same PCB
Steve Abrahamson
Tue, 19 Jun 2001 14:24:58 -0600
Re: SMT adhesive
Steve Abrahamson
Tue, 19 Jun 2001 14:14:23 -0600
New Sender Steve Joy
voids in BGA, but really reliability in general
Steve Joy
Tue, 5 Jun 2001 09:09:53 -0700
Re: voids in BGA, but really reliability in general
Steve Joy
Thu, 21 Jun 2001 11:19:37 -0700
Re: voids in BGA, but really reliability in general
Steve Joy
Thu, 21 Jun 2001 11:20:19 -0700
New Sender Steve Kelly
IPC-D-275
Steve Kelly
Thu, 14 Jun 2001 12:55:41 -0400
New Sender Steve Underwood
PGL-7 Vs Image Master film
Steve Underwood
Tue, 5 Jun 2001 17:03:37 -0400
PGL-7 Vs Image Master film
Steve Underwood
Thu, 7 Jun 2001 09:46:37 -0400
New Sender Susan James
Ok conformal coating, but how ?
Susan James
Wed, 13 Jun 2001 10:28:26 -0500
New Sender Ted Tontis
Re: **** PCB's - HASL -v- OSP
Ted Tontis
Thu, 28 Jun 2001 15:34:42 -0500
Re: **** PCB's - HASL -v- OSP
Ted Tontis
Fri, 29 Jun 2001 08:46:38 -0500
Re: Exposed copper
Ted Tontis
Fri, 1 Jun 2001 12:43:26 -0500
Re: Its too darn hot to work
Ted Tontis
Tue, 26 Jun 2001 08:17:45 -0500
Re: Measling...
Ted Tontis
Tue, 5 Jun 2001 12:34:02 -0500
New Sender Tenison Stone
Re: Circuit Board Disposal
Tenison Stone
Thu, 28 Jun 2001 14:05:42 -0500
New Sender Terry Exell
Stress screening of bare PCBs
Terry Exell
Mon, 11 Jun 2001 11:13:43 +0100
New Sender Terveen, James @ NARDAEAST
Re: High speed paste dispensing
Terveen, James @ NARDAEAST
Thu, 14 Jun 2001 08:12:08 -0400
New Sender The Job Shop
ESD & Unsealed Concrete
The Job Shop
Mon, 11 Jun 2001 11:40:30 -0700
New Sender Thomas Han
Re: ATTN: No Clean Solder Users
Thomas Han
Thu, 14 Jun 2001 10:21:33 -0700
New Sender Thomas R. Fisher
flex buried via fill?
Thomas R. Fisher
Wed, 6 Jun 2001 19:48:37 EDT
New Sender Timothy Reeves
Re: Hot Plates
Timothy Reeves
Fri, 1 Jun 2001 14:24:06 -0700
Re: QA Note
Timothy Reeves
Wed, 20 Jun 2001 14:10:37 -0700
Re: Stress screening of bare PCBs
Timothy Reeves
Tue, 12 Jun 2001 10:14:41 -0700
New Sender Tom B.
Re: A solution to white residues after smt rework ...
Tom B.
Wed, 13 Jun 2001 11:06:44 -0400
Re: FW: dispensing glue
Tom B.
Thu, 21 Jun 2001 09:31:34 -0400
Re: Glue Nozzle Cleaning
Tom B.
Mon, 18 Jun 2001 10:39:45 -0400
ICT and Burn-In Services
Tom B.
Mon, 11 Jun 2001 11:42:08 -0400
ICT and Burn-In Test Services
Tom B.
Tue, 12 Jun 2001 12:10:29 -0400
Re: Surface Mount Reverse/Back mount LED
Tom B.
Tue, 26 Jun 2001 10:56:32 -0400
New Sender Tom Burek
Re: Surface Mount Reverse/Back mount LED
Tom Burek
Tue, 26 Jun 2001 14:53:25 -0400
New Sender Tom Parkinson - Quality System Manager
Re: Feedback wanted on Registred Instructor IPC-7711/7721training
Tom Parkinson - Quality System Manager
Mon, 11 Jun 2001 14:07:52 -0400
Re: ICT calibration
Tom Parkinson - Quality System Manager
Fri, 22 Jun 2001 16:41:32 -0400
New Sender Tony Conlon
A solution to white residues after smt rework ...
Tony Conlon
Wed, 13 Jun 2001 14:35:41 +0100
Re: A solution to white residues after smt rework ...
Tony Conlon
Thu, 14 Jun 2001 09:38:09 +0200
New Sender Tony Steinke
Re: Measling...
Tony Steinke
Tue, 5 Jun 2001 15:30:42 -0400
Screen printing
Tony Steinke
Mon, 18 Jun 2001 13:58:38 -0400
New Sender Vandendolder, Ron
Re: Circuit Board Disposal
Vandendolder, Ron
Thu, 28 Jun 2001 14:53:06 -0400
New Sender Vanderhoof, Brad
Need Sony CPD-1201/9000 monitor
Vanderhoof, Brad
Fri, 22 Jun 2001 16:19:12 -0700
Re: TRI reporting...
Vanderhoof, Brad
Tue, 19 Jun 2001 18:18:39 -0700
New Sender wejlaw
Arbitration Clauses
wejlaw
Tue, 19 Jun 2001 18:27:01 -0700
New Sender Wenger, George M (George)
Re: Immersion Silver
Wenger, George M (George)
Fri, 29 Jun 2001 07:42:17 -0400
New Sender Werner Engelmaier
Re: Hole size
Werner Engelmaier
Fri, 1 Jun 2001 10:19:25 EDT
Re: Manual inspection related stuff
Werner Engelmaier
Mon, 4 Jun 2001 17:22:31 EDT
Re: Package reliabilty...
Werner Engelmaier
Fri, 1 Jun 2001 10:19:27 EDT
Re: Package reliabilty...
Werner Engelmaier
Mon, 4 Jun 2001 18:04:08 EDT
Re: Package reliabilty...
Werner Engelmaier
Tue, 5 Jun 2001 07:24:31 EDT
Re: Soldering socket pin on BGA pads - reliable?
Werner Engelmaier
Wed, 6 Jun 2001 17:16:25 EDT
Re: Spacers
Werner Engelmaier
Thu, 21 Jun 2001 09:34:50 EDT
Re: stitch bars on double-sided boards
Werner Engelmaier
Thu, 21 Jun 2001 09:34:51 EDT
Re: stitch bars on double-sided boards
Werner Engelmaier
Fri, 22 Jun 2001 08:21:10 EDT
Re: Vapor Phase Reflow
Werner Engelmaier
Wed, 27 Jun 2001 22:39:11 EDT
Re: voids in BGA
Werner Engelmaier
Wed, 6 Jun 2001 13:56:19 EDT
Re: voids in BGA, but really reliability in general
Werner Engelmaier
Fri, 22 Jun 2001 08:21:12 EDT
New Sender West, Jim
Conformal coating
West, Jim
Wed, 27 Jun 2001 12:00:31 -0400

ATOM RSS1 RSS2