Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 7 Jun 2001 07:21:21 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
hi,
we clean assemblies in an in-line aqueous cleaner also using a saponifier. these assemblies have a large no. of very small sockets on them and are soldered using an aqueous flux. intuitively, i thought it would be a problem. in fact, it hasn't been over the past five years or so.
phil
-----Original Message-----
From: Lou Hart [mailto:[log in to unmask]]
Sent: Wednesday, June 06, 2001 2:09 PM
To: [log in to unmask]
Subject: [TN] Cleaning of assemblies after hand soldering
TechNetters,
Is it possible to clean assemblies containing socketed components in an
aqueous cleaner? We have an in-line cleaner with 2% saponifier for
cleaning after surface mount reflow (water-soluble paste) and after wave
solder (water-soluble flux).
My concern is with assemblies that have had components reworked with
water-soluble flux after socketed parts have been installed. The cleaning
procedure in IPC-7721, 2.2, recommends use of an automated cleaner, and
provides instructions on hand-cleaning.
Many thanks for any comments.
Lou Hart
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|