Subject: | |
From: | |
Date: | Fri, 14 Mar 1997 09:51:28 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Gary !
Which operating system do you have ? I have just tried CAMCAD 350 and it
works fine, at least with Win 3.11 and NT
Which program is using DXF- format ? I use Autocad Lite to read dxf and I
have`t had any problems so far. You see, there are many versions
of dxf-format, so itīs not sure if this one works in your application.
In shareware version ( http://www.ecam.com ) there is no dxf interface (
Win 3.11, 16 bit version ), but you can get it for trial for 2 weeks.You
must :
1) Download the program ....exe from ecam.com
2) Extract and install
3)Start program
4)Open file->setup
5)Write down time code and send it to [log in to unmask] by email,
asking corresponding
access code. DO NOT CLOSE THE WINDOW ! Every time you open the
setup window,
timed code will change->access code.
This may sound complicated, but with this arrangement you will have a
chance to try out dxf converter
in your application.
Good luck !
johannes.sivula@ tellabs.fi
Hello
Try CAMCAD from www.rsi-inc.com
thanks
On Thu, 13 Mar 1997, Jeff Foster wrote:
> At 08:48 AM 3/11/97 EST, Gary S Thomas wrote:
> >Does anyone know of any shareware that will convert Gerber to DXF????
> >
> >thanks in advance
> >
> >gary ...
>
> Just tried CAM350 from Advanced CAM Technologies ( http://www.ecam.com/ )
> with pretty good luck!
>
> Their current version (v4.10) has a 7 day timed access period where you
can > try all(?) the features. I'm guessing that after the 7 days it
reverts to a
> crippled version until you have either a dongle (hardware key) or other
> access code which you purchase depending upon which level of feature you
need.
>
>
>
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- +
> | Jeff Foster [log in to unmask]
|
> | Engineering Assistant
|
> | Broadcast Electronics, Inc.
http://www.bdcast.com |
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- +
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|