Subject: | |
From: | |
Date: | Mon, 17 Mar 1997 09:45:45 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Please be careful when using the CAM350 Gerber to DXF or DXF to Gerber
translator. I've found some bugs and made ACT aware of them. They plan
to release another version probably later this month.
----------
From:
[log in to unmask][SMTP:[log in to unmask]] on behalf
of [log in to unmask]
Sent: Thursday, March 13, 1997 10:51 PM
To: [log in to unmask]
Subject: Re: GERBER TO DXF??
Hello Gary !
Which operating system do you have ? I have just tried CAMCAD
350 and it
works fine, at least with Win 3.11 and NT
Which program is using DXF- format ? I use Autocad Lite to read
dxf and I
have`t had any problems so far. You see, there are many
versions
of dxf-format, so itīs not sure if this one works in your
application.
In shareware version ( http://www.ecam.com ) there is no dxf
interface (
Win 3.11, 16 bit version ), but you can get it for trial for 2
weeks.You
must :
1) Download the program ....exe from ecam.com
2) Extract and install
3)Start program
4)Open file->setup
5)Write down time code and send it to [log in to unmask] by
email,
asking corresponding
access code. DO NOT CLOSE THE WINDOW ! Every time you
open the
setup window,
timed code will change->access code.
This may sound complicated, but with this arrangement you will
have a
chance to try out dxf converter
in your application.
Good luck !
johannes.sivula@ tellabs.fi
Hello
Try CAMCAD from www.rsi-inc.com
thanks
On Thu, 13 Mar 1997, Jeff Foster wrote:
> At 08:48 AM 3/11/97 EST, Gary S Thomas wrote:
> >Does anyone know of any shareware that will convert Gerber to
DXF????
> >
> >thanks in advance
> >
> >gary ...
>
> Just tried CAM350 from Advanced CAM Technologies (
http://www.ecam.com/ )
> with pretty good luck!
>
> Their current version (v4.10) has a 7 day timed access period
where you
can > try all(?) the features. I'm guessing that after the 7
days it
reverts to a
> crippled version until you have either a dongle (hardware key)
or other
> access code which you purchase depending upon which level of
feature you
need.
>
>
>
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
- +
> | Jeff Foster
[log in to unmask]
|
> | Engineering Assistant
|
> | Broadcast Electronics, Inc.
http://www.bdcast.com |
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
- +
>
****************************************************************
***********
* TechNet mail list is provided as a service by IPC using
SmartList v3.05 *
****************************************************************
***********
* To subscribe/unsubscribe send a message <to:
[log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body.
*
****************************************************************
***********
* If you are having a problem with the IPC TechNet forum please
contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at
[log in to unmask] *
****************************************************************
***********
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|