Hello

Try CAMCAD from www.rsi-inc.com

thanks




On Thu, 13 Mar 1997, Jeff Foster wrote:

> At 08:48 AM 3/11/97 EST, Gary S Thomas wrote:
> >Does anyone know of any shareware that will convert Gerber to DXF????
> >
> >thanks in advance
> >
> >gary ...
> 
> Just tried CAM350 from Advanced CAM Technologies ( http://www.ecam.com/ )
> with pretty good luck!
> 
> Their current version (v4.10) has a 7 day timed access period where you can
> try all(?) the features. I'm guessing that after the 7 days it reverts to a
> crippled version until you have either a dongle (hardware key) or other
> access code which you purchase depending upon which level of feature you need.
> 
> 
> 
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
> | Jeff Foster                                         [log in to unmask]    |
> | Engineering Assistant                                                     |
> | Broadcast Electronics, Inc.                         http://www.bdcast.com |
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
> 
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
> * with <subject: subscribe/unsubscribe> and no text in the body.          *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact   *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
> ***************************************************************************
> 
> 

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************