Hello Try CAMCAD from www.rsi-inc.com thanks On Thu, 13 Mar 1997, Jeff Foster wrote: > At 08:48 AM 3/11/97 EST, Gary S Thomas wrote: > >Does anyone know of any shareware that will convert Gerber to DXF???? > > > >thanks in advance > > > >gary ... > > Just tried CAM350 from Advanced CAM Technologies ( http://www.ecam.com/ ) > with pretty good luck! > > Their current version (v4.10) has a 7 day timed access period where you can > try all(?) the features. I'm guessing that after the 7 days it reverts to a > crippled version until you have either a dongle (hardware key) or other > access code which you purchase depending upon which level of feature you need. > > > > + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + > | Jeff Foster [log in to unmask] | > | Engineering Assistant | > | Broadcast Electronics, Inc. http://www.bdcast.com | > + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + > > *************************************************************************** > * TechNet mail list is provided as a service by IPC using SmartList v3.05 * > *************************************************************************** > * To subscribe/unsubscribe send a message <to: [log in to unmask]> * > * with <subject: subscribe/unsubscribe> and no text in the body. * > *************************************************************************** > * If you are having a problem with the IPC TechNet forum please contact * > * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * > *************************************************************************** > > *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************