 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wozAX-000BjrC; Thu, 17 Jul 97 17:37 CDT |
| Old-Return-Path: |
|
| Date: |
Thu, 17 Jul 97 15:37:59 PST |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| >From willli Thu Jul 17 17: |
37:20 1997 |
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"hFSwO3.0.PkB.Gwfpp"@ipc> |
| From [log in to unmask] Mon Jul 21 15: |
57:35 1997 |
| From: |
|
| X-Mailing-List: |
|
| X-Loop: |
|
| Subject: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Dan,
Can you use UV light or perhaps chlorine?
Jill steeper at Shipley in Marlborough, MA knows about this stuff, give her a
call.
Chuck Brummer
______________________________ Reply Separator _________________________________
Subject: Biocide, no formaldehyde.
Author: [log in to unmask] at ccUnix
Date: 7/17/97 11:06 AM
To: TechNet
We have a mildly acidic citrate type plating bath that develops MOLD
after periods of unuse, usually within two to three weeks. The mold
stains the deposit and plugs the filters. We prefer not to use
formaldehyde as a biocide due to its toxicity.
Can anyone recommend a benign biocide? Please advise.
Daniel Brandler, Ohmega Technologies, [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
