LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Whittaker, Dewey (EHCOE)

Mon, 25 Apr 2011 09:50:53 -0700

Douglas Pauls

Mon, 25 Apr 2011 11:37:37 -0500

Brian Ellis

Mon, 25 Apr 2011 17:20:02 +0300

Douglas Pauls

Mon, 25 Apr 2011 07:58:48 -0500

David Bealer

Mon, 25 Apr 2011 07:17:01 -0500

Brian Ellis

Fri, 22 Apr 2011 16:31:59 +0300

Karen Tellefsen

Fri, 22 Apr 2011 08:56:35 -0400

Brian Ellis

Fri, 22 Apr 2011 09:15:03 +0300

Robert Kondner

Thu, 21 Apr 2011 18:46:26 -0400

Karen Tellefsen

Thu, 21 Apr 2011 18:40:18 -0400

Forrester, Michael (H USA)

Thu, 21 Apr 2011 18:16:34 -0400

David Bealer

Thu, 21 Apr 2011 16:55:43 -0500

Forrester, Michael (H USA)

Thu, 21 Apr 2011 17:06:13 -0400

Aqueous Wash, DI water and IPC Specifications.

Woolley, Mark D. (Mark)

Thu, 21 Apr 2011 14:56:50 -0600

Forrester, Michael (H USA)

Thu, 21 Apr 2011 15:36:15 -0400

Baking Hi-Power LEDs

Jean-Francois Bissonnette

Thu, 7 Apr 2011 17:55:48 -0400

BGA Ball Tilt

Woolley, Mark D. (Mark)

Wed, 27 Apr 2011 14:27:01 -0600

Stadem, Richard D.

Wed, 27 Apr 2011 14:02:38 -0500

Phil Bavaro

Wed, 27 Apr 2011 11:49:42 -0700

vladimir Igoshev

Wed, 27 Apr 2011 18:48:53 +0000

Steve Gregory

Wed, 27 Apr 2011 14:33:22 -0400

Steve Gregory

Wed, 27 Apr 2011 12:03:27 -0400

BGA Ball Tilt

Woolley, Mark D. (Mark)

Wed, 27 Apr 2011 09:56:04 -0600

BGA on Solder Side

Louis Hart

Fri, 1 Apr 2011 20:10:44 +0000

Phil Bavaro

Fri, 1 Apr 2011 12:16:00 -0700

Post, Scott E

Fri, 1 Apr 2011 18:37:04 +0000

Class 0 ESDS board assembly transport...

Ioan Tempea

Fri, 1 Apr 2011 14:30:17 -0400

BGA on Solder Side

Leif Erik Laerum

Fri, 1 Apr 2011 13:11:16 -0500

BGA X-Ray - 2D

Re: BGA X-Ray - 2D

Ed Popielarski

Thu, 14 Apr 2011 08:46:18 -0700

Re: BGA X-Ray - 2D

Diljit Matharu

Wed, 13 Apr 2011 13:01:24 -0700

Re: BGA X-Ray - 2D

Jerry Dengler

Wed, 13 Apr 2011 15:56:52 -0400

BGA X-Ray - 2D

John Anselmo

Wed, 13 Apr 2011 13:53:15 -0600

castellated hole spec

Kenneth J. Wood

Tue, 12 Apr 2011 15:54:08 -0400

Keith Calhoun

Fri, 15 Apr 2011 07:12:52 -0400

Steven Creswick

Thu, 14 Apr 2011 19:27:58 -0400

Gregg Owens

Thu, 14 Apr 2011 14:39:21 -0700

Stadem, Richard D.

Tue, 12 Apr 2011 12:40:54 -0500

Thayer, Wayne - IIW

Tue, 12 Apr 2011 13:33:04 -0400

Gene Felder

Tue, 12 Apr 2011 10:26:22 -0700

Richard D. Krug

Tue, 12 Apr 2011 13:09:36 -0400

Steve Gregory

Tue, 12 Apr 2011 12:26:43 -0400

Richard D. Krug

Tue, 12 Apr 2011 12:03:29 -0400

Steve Gregory

Tue, 12 Apr 2011 11:55:47 -0400

Steve Gregory

Sat, 9 Apr 2011 23:16:36 -0400

Class 0 ESDS board assembly transport...

Joyce Koo

Sat, 9 Apr 2011 20:41:41 -0400

Steve Gregory

Sat, 9 Apr 2011 20:22:06 -0400

Contact search

Re: Contact search

Mickey Weiner

Wed, 27 Apr 2011 07:46:07 +0300

Re: Contact search

harvey

Tue, 26 Apr 2011 12:57:23 -0700

Contact search

Mickey Weiner

Tue, 26 Apr 2011 21:53:41 +0300

Cracked ceramic capacitors

Robert Kondner

Fri, 8 Apr 2011 13:00:34 -0400

Stadem, Richard D.

Fri, 8 Apr 2011 11:58:22 -0500

Joyce Koo

Fri, 8 Apr 2011 12:55:26 -0400

Stadem, Richard D.

Fri, 8 Apr 2011 11:34:00 -0500

Roger Mack

Fri, 8 Apr 2011 11:18:47 -0500

Werner Engelmaier

Fri, 8 Apr 2011 12:08:26 -0400

Ioan Tempea

Fri, 8 Apr 2011 12:05:38 -0400

David D. Hillman

Fri, 8 Apr 2011 11:03:25 -0500

Cracked ceramic capacitors

Stadem, Richard D.

Fri, 8 Apr 2011 10:23:55 -0500

Rivera, Raye

Fri, 8 Apr 2011 07:55:19 -0700

Definition

Pete

Wed, 13 Apr 2011 08:20:50 -0500

Stadem, Richard D.

Tue, 12 Apr 2011 15:05:45 -0500

Stadem, Richard D.

Tue, 12 Apr 2011 15:00:38 -0500

Werner Engelmaier

Tue, 12 Apr 2011 15:47:36 -0400

Whittaker, Dewey (EHCOE)

Tue, 12 Apr 2011 12:37:26 -0700

Definition

Werner Engelmaier

Tue, 12 Apr 2011 15:30:17 -0400

DI water and plating

Re: DI water and plating

John Goulet

Tue, 5 Apr 2011 19:29:15 +0000

Re: DI water and plating

Chuck Brummer

Tue, 5 Apr 2011 11:18:24 -0700

Re: DI water and plating

Karen Tellefsen

Tue, 5 Apr 2011 12:40:30 -0400

DI water and plating

Douglas Pauls

Tue, 5 Apr 2011 10:48:53 -0500

Die bonding requirements

Inge Hernefjord

Sat, 30 Apr 2011 08:34:50 +0200

Thayer, Wayne - IIW

Fri, 29 Apr 2011 07:30:26 -0400

Inge Hernefjord

Thu, 28 Apr 2011 21:51:26 +0200

Steven Creswick

Thu, 28 Apr 2011 13:42:08 -0400

Victor Hernandez

Thu, 28 Apr 2011 11:46:44 -0500

Dispensing of Peelable Soldermask

Steven Creswick

Thu, 28 Apr 2011 11:13:23 -0400

Die bonding requirements

Victor Hernandez

Thu, 28 Apr 2011 08:27:36 -0500

Stadem, Richard D.

Mon, 18 Apr 2011 07:46:54 -0500

Stadem, Richard D.

Mon, 18 Apr 2011 07:44:39 -0500

Blair Hogg

Sun, 17 Apr 2011 10:05:26 -0500

Steven Creswick

Sat, 16 Apr 2011 09:00:05 -0400

Keith Calhoun

Fri, 15 Apr 2011 13:15:44 -0400

Blair Hogg

Fri, 15 Apr 2011 11:49:17 -0500

Steven Creswick

Fri, 15 Apr 2011 11:40:10 -0400

Phil Bavaro

Fri, 15 Apr 2011 07:13:20 -0700

Dispensing of Peelable Soldermask

Richard D. Krug

Fri, 15 Apr 2011 10:17:40 -0400

Blair Hogg

Fri, 15 Apr 2011 09:04:59 -0500

Engelmaier on-line obiturary from Global SMT - where Werner was a columnist.

Dennis Fritz

Sun, 17 Apr 2011 22:44:35 -0400

ESD safe ID Badge Holders

Phil Bavaro

Thu, 21 Apr 2011 08:41:13 -0700

Marsico, James - ES

Thu, 21 Apr 2011 11:29:54 -0400

Phil Bavaro

Thu, 21 Apr 2011 08:28:07 -0700

Marsico, James - ES

Thu, 21 Apr 2011 11:26:03 -0400

Stadem, Richard D.

Thu, 21 Apr 2011 09:55:49 -0500

Stadem, Richard D.

Thu, 21 Apr 2011 09:48:12 -0500

Marsico, James - ES

Thu, 21 Apr 2011 10:36:53 -0400

ESD safe ID Badge Holders

Stadem, Richard D.

Thu, 21 Apr 2011 09:19:57 -0500

Marsico, James - ES

Thu, 21 Apr 2011 09:19:47 -0400

EXT :Re: [TN] Sad news about Werner Engelmaier

Re: EXT :Re: [TN] Sad news about Werner Engelmaier

Patten, James C (AS)

Sun, 17 Apr 2011 17:41:22 +0000

EXTERNAL: [TN] LGA geometry advice

Re: EXTERNAL: [TN] LGA geometry advice

Stadem, Richard D.

Tue, 19 Apr 2011 10:48:19 -0500

Re: EXTERNAL: [TN] LGA geometry advice

Gumpert, Ben

Tue, 19 Apr 2011 11:42:29 -0400

EXTERNAL: [TN] terminology

Re: EXTERNAL: [TN] terminology

Douglas Pauls

Thu, 31 Mar 2011 06:51:54 -0500

Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Stadem, Richard D.

Mon, 18 Apr 2011 13:42:59 -0500

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Graham Collins

Mon, 18 Apr 2011 15:28:32 -0300

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Larry Dzaugis

Mon, 18 Apr 2011 13:17:46 -0500

Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Andrzej Zielinski

Mon, 18 Apr 2011 04:25:43 -0500

Gluing of SMT pads

Re: Gluing of SMT pads

Stadem, Richard D.

Mon, 11 Apr 2011 09:25:08 -0500

Gluing of SMT pads

Ioan Tempea

Mon, 11 Apr 2011 09:53:21 -0400

hole sizes

John Goulet

Tue, 26 Apr 2011 14:58:12 +0000

Chris Mahanna

Mon, 25 Apr 2011 10:04:23 -0400

Wenger, George M.

Fri, 22 Apr 2011 07:59:44 -0500

Immersion/Electroless Palladium as final finish?

David D. Hillman

Fri, 22 Apr 2011 07:37:41 -0500

hole sizes

Louis Hart

Thu, 21 Apr 2011 23:24:46 +0000

Re: Immersion/Electroless Palladium as final finish?

Reuven Rokah

Thu, 21 Apr 2011 20:59:16 +0300

Re: Immersion/Electroless Palladium as final finish?

R Sedlak

Thu, 21 Apr 2011 09:10:45 -0700

Re: Immersion/Electroless Palladium as final finish?

David D. Hillman

Wed, 20 Apr 2011 15:28:08 -0500

Immersion/Electroless Palladium as final finish?

Kimberly Stanley

Wed, 20 Apr 2011 20:13:35 +0000

IPC webinar on FR-4 CCL Reclassification Explained 4-May US/5-May Asia

David Bergman

Tue, 19 Apr 2011 16:55:09 -0500

IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Victor Hernandez

Thu, 28 Apr 2011 06:55:04 -0500

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Inge Hernefjord

Thu, 28 Apr 2011 07:28:42 +0200

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Nowland, Russell Howard (Russell)

Wed, 27 Apr 2011 13:27:39 -0500

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris

Wed, 27 Apr 2011 10:57:30 -0500

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris

Wed, 27 Apr 2011 10:55:28 -0500

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Inge Hernefjord

Fri, 22 Apr 2011 18:29:46 +0200

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Phil Bavaro

Thu, 21 Apr 2011 15:32:48 -0700

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris

Thu, 21 Apr 2011 12:21:04 -0500

IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris

Wed, 20 Apr 2011 15:13:56 -0500

laid off

Brian Stumm

Tue, 26 Apr 2011 16:29:51 -0700

John Goulet

Tue, 26 Apr 2011 19:40:31 +0000

Gene Felder

Tue, 26 Apr 2011 11:37:40 -0700

John Goulet

Tue, 26 Apr 2011 18:01:41 +0000

Robert Kondner

Tue, 26 Apr 2011 13:57:13 -0400

John Goulet

Tue, 26 Apr 2011 17:46:53 +0000

Ahmad, Syed

Tue, 26 Apr 2011 09:06:45 -0700

Upton, Shawn

Tue, 26 Apr 2011 11:51:54 -0400

Robert Kondner

Tue, 26 Apr 2011 11:28:47 -0400

Karen Tellefsen

Tue, 26 Apr 2011 10:45:43 -0400

Woolley, Mark D. (Mark)

Tue, 26 Apr 2011 07:37:55 -0600

John Goulet

Tue, 26 Apr 2011 12:35:36 +0000

Steve Gregory

Mon, 25 Apr 2011 21:13:49 -0400

Dwight Mattix

Mon, 25 Apr 2011 17:33:39 -0700

Tan Geok Ang

Tue, 26 Apr 2011 08:06:17 +0800

Large/Thick boards and PnP

Joyce Koo

Mon, 25 Apr 2011 19:29:09 -0400

laid off

pearl petras

Mon, 25 Apr 2011 16:17:57 -0700

Re: Large/Thick boards and PnP

Jerry Dengler

Thu, 28 Apr 2011 08:38:49 -0400

Large/Thick boards and PnP

Upton, Shawn

Thu, 28 Apr 2011 08:04:38 -0400

LGA geometry advice

Pete

Wed, 20 Apr 2011 09:05:22 -0500

Jerry Dengler

Wed, 20 Apr 2011 09:39:25 -0400

Stadem, Richard D.

Wed, 20 Apr 2011 08:38:17 -0500

Rex Waygood

Wed, 20 Apr 2011 14:31:37 +0100

Karen Tellefsen

Wed, 20 Apr 2011 09:25:45 -0400

Ioan Tempea

Wed, 20 Apr 2011 08:58:53 -0400

Stadem, Richard D.

Wed, 20 Apr 2011 07:46:04 -0500

Eric Christison

Wed, 20 Apr 2011 09:18:41 +0100

Dennis Fritz

Tue, 19 Apr 2011 13:19:48 -0400

Jerry Dengler

Tue, 19 Apr 2011 12:42:21 -0400

Stadem, Richard D.

Tue, 19 Apr 2011 11:41:18 -0500

Eric Christison

Tue, 19 Apr 2011 17:04:06 +0100

Jerry Dengler

Tue, 19 Apr 2011 11:52:23 -0400

Listserv Status April 5th

Stadem, Richard D.

Tue, 19 Apr 2011 10:47:13 -0500

LGA geometry advice

Eric Christison

Tue, 19 Apr 2011 16:35:53 +0100

Re: Listserv Status April 5th

Stadem, Richard D.

Wed, 6 Apr 2011 07:40:14 -0500

Listserv Status April 5th

Keach Sasamori

Tue, 5 Apr 2011 16:42:38 -0500

Listserv Upgrade - Status April 4th

Keach Sasamori

Mon, 4 Apr 2011 15:01:52 -0500

Mixed bed resin in deionizing tanks

Re: Mixed bed resin in deionizing tanks

Brian Ellis

Thu, 28 Apr 2011 15:42:00 +0300

Mixed bed resin in deionizing tanks

Steve Gregory

Thu, 28 Apr 2011 08:28:04 -0400

NESTING

Linda Langley

Wed, 6 Apr 2011 13:18:05 -0400

No traffic

Re: No traffic

Hogg, Blair K.

Thu, 31 Mar 2011 11:07:52 -0400

Carroll, Thomas A

Sat, 30 Apr 2011 05:03:10 -0500

Brian Ellis

Sat, 30 Apr 2011 09:29:00 +0300

David D. Hillman

Fri, 29 Apr 2011 16:26:45 -0500

Carroll, Thomas A

Fri, 22 Apr 2011 22:50:16 -0500

Ahne Oosterhof

Fri, 22 Apr 2011 15:58:51 -0700

David D. Hillman

Fri, 22 Apr 2011 16:18:10 -0500

David D. Hillman

Fri, 8 Apr 2011 16:48:22 -0500

Graham Collins

Mon, 4 Apr 2011 20:49:14 -0300

David D. Hillman

Mon, 4 Apr 2011 17:40:28 -0500

Carroll, Thomas A

Fri, 29 Apr 2011 08:42:32 -0500

Graham Collins

Fri, 29 Apr 2011 10:54:19 -0300

Victor Hernandez

Fri, 29 Apr 2011 08:32:30 -0500

David D. Hillman

Fri, 29 Apr 2011 08:21:49 -0500

Carroll, Thomas A

Fri, 22 Apr 2011 07:46:37 -0500

David D. Hillman

Fri, 22 Apr 2011 07:14:44 -0500

Douglas Pauls

Fri, 8 Apr 2011 07:46:07 -0500

Steven Creswick

Thu, 7 Apr 2011 20:19:57 -0400

Carroll, Thomas A

Thu, 7 Apr 2011 19:09:08 -0500

Ahne Oosterhof

Thu, 7 Apr 2011 17:05:01 -0700

Carroll, Thomas A

Thu, 7 Apr 2011 17:00:25 -0500

Woolley, Mark D. (Mark)

Thu, 7 Apr 2011 15:56:00 -0600

Woolley, Mark D. (Mark)

Thu, 7 Apr 2011 15:54:40 -0600

Robert Wolfe

Thu, 7 Apr 2011 17:49:32 -0400

Phil Bavaro

Thu, 7 Apr 2011 14:40:23 -0700

David D. Hillman

Thu, 7 Apr 2011 16:29:56 -0500

Ahne Oosterhof

Mon, 4 Apr 2011 08:39:44 -0700

Phil Bavaro

Mon, 4 Apr 2011 07:14:02 -0700

Steven Creswick

Mon, 4 Apr 2011 09:34:10 -0400

Mike Fenner

Mon, 4 Apr 2011 14:18:59 +0100

Carroll, Thomas A

Mon, 4 Apr 2011 07:57:46 -0500

Douglas Pauls

Mon, 4 Apr 2011 07:39:00 -0500

Graham Collins

Mon, 4 Apr 2011 09:35:27 -0300

David D. Hillman

Mon, 4 Apr 2011 07:30:42 -0500

Joyce Koo

Fri, 1 Apr 2011 21:23:25 -0400

Ted Edwards

Sat, 2 Apr 2011 00:13:34 +0000

Frank Kimmey

Fri, 1 Apr 2011 16:49:39 -0700

Phil Bavaro

Fri, 1 Apr 2011 16:44:10 -0700

Joyce Koo

Fri, 1 Apr 2011 19:17:33 -0400

Frank Kimmey

Fri, 1 Apr 2011 16:00:05 -0700

NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

David D. Hillman

Fri, 1 Apr 2011 17:57:04 -0500

NTC Position Available

Blair Hogg

Wed, 6 Apr 2011 08:35:39 -0500

Re: NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Ahne Oosterhof

Fri, 29 Apr 2011 12:27:14 -0700

NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

David D. Hillman

Fri, 29 Apr 2011 11:28:43 -0500

Panel manufacturability

Re: Panel manufacturability

Chris Knudsen

Fri, 29 Apr 2011 10:38:45 -0400

Re: Panel manufacturability

Larry Dzaugis

Thu, 28 Apr 2011 17:10:04 -0500

Panel manufacturability

Jean-Francois Bissonnette

Thu, 28 Apr 2011 17:28:52 -0400

Peel strength Value

Re: Peel strength Value

Lee Parker

Tue, 5 Apr 2011 20:56:08 -0400

Peel strength Value

Gilbert Min

Wed, 6 Apr 2011 09:52:09 +0900

PK Metals - Molten Solder Surfactant (MS2(tm))

Craig Sullivan

Fri, 22 Apr 2011 09:03:37 -0400

Please Remove Posts from Archives "Laid OFF"

John Goulet

Wed, 27 Apr 2011 01:05:06 +0000

PWB Finish Specifications

Re: PWB Finish Specifications

David D. Hillman

Fri, 8 Apr 2011 14:11:25 -0500

Re: PWB Finish Specifications

Thomas E Kemp

Fri, 8 Apr 2011 10:13:05 -0500

PWB Finish Specifications

Stadem, Richard D.

Fri, 8 Apr 2011 09:48:53 -0500

Response from Werner Engelmaier's son, Peter

Pete

Tue, 19 Apr 2011 08:30:54 -0500

Phil Bavaro

Mon, 18 Apr 2011 10:25:31 -0700

Paul Edwards

Mon, 18 Apr 2011 09:39:56 -0700

Response from Werner Engelmaier's son, Peter

Werner Engelmaier

Sun, 17 Apr 2011 22:43:39 -0400

Dennis Fritz

Sun, 17 Apr 2011 22:35:46 -0400

response to prevalidation for DLA

Louis Hart

Thu, 21 Apr 2011 23:12:21 +0000

Sad news about Werner Engelmaier

Jerry Garcia

Tue, 26 Apr 2011 08:37:49 -0400

Fox, Ian

Tue, 26 Apr 2011 08:39:11 +0100

Gabriela

Wed, 20 Apr 2011 11:24:54 +0300

Inge Hernefjord

Wed, 20 Apr 2011 09:03:26 +0200

Rick Bell

Tue, 19 Apr 2011 15:37:45 -0500

Leland Woodall

Mon, 18 Apr 2011 16:20:26 -0400

Amol Kane

Mon, 18 Apr 2011 15:51:35 -0400

Paul Reid

Mon, 18 Apr 2011 13:27:05 -0400

Jack Olson

Mon, 18 Apr 2011 09:39:31 -0500

Graham Collins

Mon, 18 Apr 2011 10:56:21 -0300

Stadem, Richard D.

Mon, 18 Apr 2011 08:34:28 -0500

Eric Christison

Mon, 18 Apr 2011 10:35:15 +0100

Brian Ellis

Mon, 18 Apr 2011 08:54:26 +0300

Tan Geok Ang

Mon, 18 Apr 2011 09:06:20 +0800

Karen Tellefsen

Sun, 17 Apr 2011 15:56:34 -0400

Graham Naisbitt

Sun, 17 Apr 2011 19:28:16 +0100

Bob Landman

Sun, 17 Apr 2011 14:26:44 -0400

Lee Parker

Sun, 17 Apr 2011 14:07:13 -0400

Bev Christian

Sun, 17 Apr 2011 13:27:39 -0400

Joyce Koo

Sun, 17 Apr 2011 13:08:05 -0400

John Goulet

Sun, 17 Apr 2011 16:37:28 +0000

Mumtaz Bora

Sun, 17 Apr 2011 09:34:31 -0700

Reuven Rokah

Sun, 17 Apr 2011 19:23:57 +0300

Carroll, Thomas A

Sun, 17 Apr 2011 11:15:45 -0500

Steve Gregory

Sun, 17 Apr 2011 12:14:09 -0400

Sad news about Werner Engelmaier

Steven Creswick

Sun, 17 Apr 2011 11:52:38 -0400

Jack Crawford

Sun, 17 Apr 2011 10:48:17 -0500

Sad news about Werner Engelmaier, Business in Scotland

Re: Sad news about Werner Engelmaier, Business in Scotland

John Goulet

Tue, 26 Apr 2011 14:42:51 +0000

Solder Mask Touch Up

Re: Solder Mask Touch Up

Steve Gregory

Wed, 27 Apr 2011 12:37:04 -0400

Solder Mask Touch Up

Bev Christian

Wed, 27 Apr 2011 12:03:14 -0400

Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Rex Waygood

Mon, 4 Apr 2011 15:42:23 +0100

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Bogert, Gerald L (Contractor)

Sat, 2 Apr 2011 10:43:05 -0400

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Brad Saunders

Sat, 2 Apr 2011 08:47:42 -0400

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Carroll, Thomas A

Fri, 1 Apr 2011 14:11:00 -0500

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Graham Collins

Fri, 1 Apr 2011 15:53:48 -0300

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Jim Carlson

Fri, 1 Apr 2011 14:32:15 -0400

Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Bogert, Gerald L (Contractor)

Thu, 31 Mar 2011 06:28:49 -0400

sorry...

Louis Hart

Thu, 21 Apr 2011 23:14:27 +0000

Spare Part and Maintainence Cost Approximation

Re: Spare Part and Maintainence Cost Approximation

Stadem, Richard D.

Mon, 4 Apr 2011 07:42:39 -0500

Re: Spare Part and Maintainence Cost Approximation

Nowland, Russell Howard (Russell)

Fri, 1 Apr 2011 13:54:36 -0500

Spare Part and Maintainence Cost Approximation

prashant chopra

Thu, 31 Mar 2011 17:53:35 +0530

Stencil Thickness

Post, Scott E

Tue, 19 Apr 2011 14:25:11 +0000

Robert Kondner

Tue, 19 Apr 2011 10:14:32 -0400

Nowland, Russell Howard (Russell)

Tue, 19 Apr 2011 09:08:01 -0500

Amol Kane

Tue, 19 Apr 2011 09:09:42 -0400

Still dealing with Listserv upgrade

Lenny Carter

Tue, 19 Apr 2011 09:08:48 -0400

Stencil Thickness

Jean-Francois Bissonnette

Tue, 19 Apr 2011 08:55:17 -0400

Keach Sasamori

Thu, 31 Mar 2011 12:48:30 -0500

Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Re: Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Michael R. Floyd

Wed, 6 Apr 2011 15:06:43 -0400

Re: Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Werner Engelmaier

Wed, 6 Apr 2011 15:15:07 -0400

Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Victor Hernandez

Wed, 6 Apr 2011 13:30:26 -0500

Tape and Reel Specification

Marsico, James - ES

Wed, 27 Apr 2011 13:20:11 -0400

Steve Gregory

Wed, 27 Apr 2011 12:01:29 -0400

Robert Kondner

Wed, 27 Apr 2011 11:59:58 -0400

Tape and Reel Specification

Kelly Morris

Wed, 27 Apr 2011 10:51:36 -0500

Marsico, James - ES

Wed, 27 Apr 2011 11:28:28 -0400

terminology

Brad Saunders

Sat, 2 Apr 2011 08:57:40 -0400

Marsal Tampubolon

Fri, 1 Apr 2011 14:25:34 +0700

Ed Popielarski

Thu, 31 Mar 2011 12:08:21 -0700

terminology _ PCA support for P&P

Jack Olson

Thu, 31 Mar 2011 08:37:20 -0500

Re: terminology _ PCA support for P&P

John Goulet

Thu, 31 Mar 2011 14:13:57 +0000

Trace repair, need material source

Re: Trace repair, need material source

Graham Collins

Fri, 29 Apr 2011 08:48:12 -0300

UL and Bare Board Fabrication

Re: UL and Bare Board Fabrication

Brad Saunders

Sat, 2 Apr 2011 09:06:41 -0400

Update - Listserv Upgrade

Re: Update - Listserv Upgrade

Keach Sasamori

Mon, 4 Apr 2011 09:51:34 -0500

Re: Update - Listserv Upgrade

Blair Hogg

Mon, 4 Apr 2011 08:43:16 -0500

Update - Listserv Upgrade

Keach Sasamori

Fri, 1 Apr 2011 14:20:41 -0500

Vertical solder fill for component with thermal pad.

Re: Vertical solder fill for component with thermal pad.

Larry Dzaugis

Wed, 20 Apr 2011 13:59:38 -0500

Re: Vertical solder fill for component with thermal pad.

Luan Nguyen

Thu, 7 Apr 2011 08:07:15 +0700

Re: Vertical solder fill for component with thermal pad.

Mike Fenner

Wed, 6 Apr 2011 15:37:43 +0100

Re: Vertical solder fill for component with thermal pad.

Joyce Koo

Wed, 6 Apr 2011 04:52:28 -0400

Vertical solder fill for component with thermal pad.

Luan Nguyen

Wed, 6 Apr 2011 15:16:07 +0700

Werner

Atkinson, Neil

Mon, 18 Apr 2011 06:37:53 +0100

White solder mask discoloration

Joyce Koo

Tue, 26 Apr 2011 17:47:48 -0400

vladimir Igoshev

Tue, 26 Apr 2011 21:33:35 +0000

Lenny Carter

Tue, 26 Apr 2011 16:01:39 -0500

Paul Edwards

Tue, 26 Apr 2011 13:48:08 -0700

Jean-Francois Bissonnette

Tue, 26 Apr 2011 16:39:03 -0400

John Parsons

Tue, 26 Apr 2011 13:40:52 -0700

Lenny Carter

Tue, 26 Apr 2011 16:34:59 -0400

Jean-Francois Bissonnette

Tue, 26 Apr 2011 16:23:02 -0400

Paul Edwards

Tue, 26 Apr 2011 10:40:32 -0700

Richard D. Krug

Tue, 26 Apr 2011 07:35:51 -0400

Whittaker, Dewey (EHCOE)

Mon, 25 Apr 2011 12:05:44 -0700

Dennis Fritz

Mon, 25 Apr 2011 14:50:14 -0400

White solder mask discoloration

Louis Hart

Fri, 22 Apr 2011 13:21:59 +0000

Jean-Francois Bissonnette

Fri, 22 Apr 2011 09:19:37 -0400

[TechNet] DI water and plating

Paul Edwards

Wed, 6 Apr 2011 09:18:31 -0700

Brian Ellis

Wed, 6 Apr 2011 19:01:16 +0300

Karen Tellefsen

Wed, 6 Apr 2011 11:15:01 -0400

R Sedlak

Wed, 6 Apr 2011 07:26:04 -0700

Brian Ellis

Wed, 6 Apr 2011 17:08:36 +0300

Paul Reid

Wed, 6 Apr 2011 08:42:19 -0400

Douglas Pauls

Wed, 6 Apr 2011 07:32:43 -0500

Joyce Koo

Tue, 5 Apr 2011 21:42:03 -0400