TECHNET Archives

October 2007

TechNet@IPC.ORG
Options: Hide Table of Contents

- bogert (1 Message)
<> (9 Messages)
Ahmet Cosan (1 Message)
Ahne Oosterhof (4 Messages)
Alan Kreplick (1 Message)
Alexandra Curtis (1 Message)
Anna Seredovaya (1 Message)
arnaud grivon (2 Messages)
Barry Gallegos (4 Messages)
Bernard Kessler (2 Messages)
Betty Magnin (1 Message)
Bev Christian (2 Messages)
Bill Kasprzak (1 Message)
Bill Kunkle (1 Message)
Black, Paul (1 Message)
Blair Hogg (6 Messages)
Bob Arciolla (4 Messages)
Bob Perkins (1 Message)
Brian Ellis (11 Messages)
Brooks,Bill (6 Messages)
Carl Proescholdt (2 Messages)
Chafin, Ken G. (4 Messages)
Cheryl Tulkoff (2 Messages)
Chris Ball (1 Message)
Chuck Brummer (1 Message)
Creswick, Steven (4 Messages)
Croslin, Robert (1 Message)
Dale Ritzen (3 Messages)
Dan Skweres (2 Messages)
Daniel Blass (2 Messages)
Dave Schaefer (1 Message)
Dave Seymour (1 Message)
Dave Simonik (2 Messages)
David Suraski (1 Message)
David Tremmel (1 Message)
Davis, Larry (1 Message)
Dennis Fritz (2 Messages)
Donald Kyle (4 Messages)
Donald Vischulis (2 Messages)
Douglas O. Pauls (3 Messages)
ekalgren (2 Messages)
Eric Castonguay (3 Messages)
Eric CHRISTISON (1 Message)
Franklin D Asbell (6 Messages)
Garry Foskett (1 Message)
Gene Felder (2 Messages)
Genny Gibbard (8 Messages)
George Milad (1 Message)
Gervascio, Thomas (7 Messages)
Graham Collins (3 Messages)
Graham Naisbitt (3 Messages)
Graham Wilson (2 Messages)
Grant Emandien (1 Message)
Green, Mike (2 Messages)
Guenter Grossmann (1 Message)
Gumpert, Ben (4 Messages)
Guy Ramsey (15 Messages)
Haynes, Kim (2 Messages)
Hernefjord Ingemar (12 Messages)
Hfjord (22 Messages)
Ian Hanna (5 Messages)
Igoshev, Vladimir (2 Messages)
IPCmail (1 Message)
Ivanoe Pedruzzi (1 Message)
Jack Crawford (1 Message)
Jack Olson (3 Messages)
Jerry Dengler (1 Message)
Joe Macko (1 Message)
Joe Russeau (5 Messages)
Joel Alexander (5 Messages)
John Burke (6 Messages)
John Foster (2 Messages)
John Maxwell (1 Message)
John Parsons (1 Message)
John Queen (2 Messages)
Juan T. Marugán (2 Messages)
Karl Hunsinger (2 Messages)
Kathy Kuhlow (1 Message)
Kerry McMullen (1 Message)
Kevin Glidden (2 Messages)
Lee parker (2 Messages)
Leland Woodall (2 Messages)
Leo Higgins (5 Messages)
Linda Langley (1 Message)
Louis Guérin (1 Message)
Louis Hart (2 Messages)
Luan Nguyen (1 Message)
Matt Kehoe, SIPAD Systems (1 Message)
Matthias Mansfeld (1 Message)
McGlaughlin, Jeffrey A (3 Messages)
Michelle Michelotti (2 Messages)
Miguel Vallejo (1 Message)
Mike Fenner (1 Message)
N Burtt (2 Messages)
Neil Maloney (2 Messages)
Nimal Liyanage (1 Message)
P. Langeveld (5 Messages)
Paul Edwards (1 Message)
Paul P Greene (1 Message)
Paymon Sani (4 Messages)
peter blokhuis (2 Messages)
Peter Swanson (1 Message)
Phil Nutting (18 Messages)
Phil Zarrow (2 Messages)
Phillip Bavaro (1 Message)
prashant chopra (2 Messages)
R Sedlak (5 Messages)
Randy Bock Sr. (3 Messages)
Richard Kraszewski (4 Messages)
Roberts, Jon (1 Message)
Roger Stoops (1 Message)
Roland Jaquet (1 Message)
Scott Lefebvre (2 Messages)
Scott Westheimer (1 Message)
Stadem, Richard D. (22 Messages)
Steve Gregory (12 Messages)
Steve Kelly (1 Message)
Sue Powers-Hartman (1 Message)
Susan Hott (2 Messages)
Ted Kong (1 Message)
Ted Tontis (7 Messages)
Tempea, Ioan (7 Messages)
Terry Kozlyk (1 Message)
Terry L. Munson (1 Message)
Thayer, Wayne (10 Messages)
Thomas, Ian (Ian) % (1 Message)
Tina Nerad (19 Messages)
Tom P. Hummel (1 Message)
Tony Steinke (1 Message)
Upton, Shawn (1 Message)
Victor G. Hernandez (6 Messages)
Wee Mei (1 Message)
weiner, mickey (1 Message)
Wenger, George M. (2 Messages)
Werner Engelmaier /* (8 Messages)
Werner Engelmaier (7 Messages)
West, Jim (1 Message)
Whittaker, Dewey (EHCOE) (23 Messages)
Wilson, Bob (2 Messages)
Wrobel, Clayton (1 Message)
Yuan-chia Joyce Koo (5 Messages)
Zilber Gil (3 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender - bogert
Cleaning of ESD Sensitive Circuit Boards
- bogert
Mon, 1 Oct 2007 18:06:32 -0400
New Sender <>
Re: cleaning concerns
<>
Wed, 24 Oct 2007 11:08:48 EDT
Henry Rekers is out of the office.
<>
Sat, 6 Oct 2007 04:00:35 PDT
Re: Samtec SMT Connector Woe's...(again)
<>
Tue, 30 Oct 2007 16:54:12 EDT
Re: Shielding for BGA rework
<>
Thu, 11 Oct 2007 18:36:03 EDT
Soldering on DBC
<>
Fri, 19 Oct 2007 07:24:07 +0200
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole pl...
<>
Sun, 14 Oct 2007 16:15:28 EDT
URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
<>
Sat, 13 Oct 2007 12:26:35 EDT
Re: World class DPMO
<>
Mon, 29 Oct 2007 19:25:32 EDT
Re: World class DPMO
<>
Tue, 30 Oct 2007 14:47:02 EDT
New Sender Ahmet Cosan
Mounting standard of electrolytic capacitors
Ahmet Cosan
Tue, 23 Oct 2007 08:28:11 -0500
New Sender Ahne Oosterhof
Re: I don't expect much answers on this....
Ahne Oosterhof
Mon, 1 Oct 2007 14:06:49 -0700
Re: Samtec SMT Connector Woe's...(again)
Ahne Oosterhof
Tue, 30 Oct 2007 18:54:31 -0700
Re: Second sources - generic components
Ahne Oosterhof
Tue, 23 Oct 2007 09:59:47 -0700
Re: Solder paste slump patterns
Ahne Oosterhof
Fri, 19 Oct 2007 15:18:22 -0700
New Sender Alan Kreplick
PWB-Hole Plating for Press-Fit Connectors
Alan Kreplick
Wed, 17 Oct 2007 06:44:04 -0400
New Sender Alexandra Curtis
IPC Test and Inspection Conference December 10-12 in San Jose, CA
Alexandra Curtis
Tue, 16 Oct 2007 15:56:23 -0500
New Sender Anna Seredovaya
"Mixed" Soldering Process
Anna Seredovaya
Mon, 15 Oct 2007 13:21:45 +0200
New Sender arnaud grivon
PCB Outer Layer Pad & Trace Etching Tolerances
arnaud grivon
Wed, 10 Oct 2007 14:38:09 +0200
Resent: PCB Outer Layer Pad & Trace Etching Tolerances
arnaud grivon
Tue, 16 Oct 2007 18:11:58 +0200
New Sender Barry Gallegos
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Barry Gallegos
Thu, 11 Oct 2007 07:55:25 -0600
Re: Shielding for BGA rework
Barry Gallegos
Thu, 11 Oct 2007 13:18:11 -0600
Re: Shielding for BGA rework
Barry Gallegos
Thu, 11 Oct 2007 13:37:41 -0600
Re: SMT machine recommendation
Barry Gallegos
Fri, 19 Oct 2007 09:29:01 -0600
New Sender Bernard Kessler
Re: Second sources - generic components
Bernard Kessler
Fri, 19 Oct 2007 10:45:28 -0700
Re: Second sources - generic components
Bernard Kessler
Mon, 22 Oct 2007 11:17:48 -0700
New Sender Betty Magnin
IPC Sampling plan
Betty Magnin
Tue, 16 Oct 2007 06:20:21 -0500
New Sender Bev Christian
Re: Metal Dome Switches
Bev Christian
Tue, 2 Oct 2007 16:57:10 -0400
Re: Thermocouple Longevity?
Bev Christian
Tue, 2 Oct 2007 14:23:13 -0400
New Sender Bill Kasprzak
Bill Kasprzak is in California working on your project.
Bill Kasprzak
Mon, 22 Oct 2007 08:37:12 -0400
New Sender Bill Kunkle
Re: Solder paste slump patterns
Bill Kunkle
Tue, 23 Oct 2007 09:40:35 -0500
New Sender Black, Paul
Re: RoHS wire solder
Black, Paul
Mon, 8 Oct 2007 16:31:13 -0400
New Sender Blair Hogg
Friday NTC - Cub Scout awards with lead in paint
Blair Hogg
Fri, 5 Oct 2007 07:54:31 -0500
Re: No clean Flux for Class 3 products compatible with Conformal Coating
Blair Hogg
Wed, 24 Oct 2007 20:33:43 -0500
Re: NTC test
Blair Hogg
Tue, 2 Oct 2007 09:00:15 -0500
Re: SV: [TN] Thermocouple Longevity?
Blair Hogg
Wed, 3 Oct 2007 12:46:10 -0500
Re: Test
Blair Hogg
Tue, 16 Oct 2007 14:18:51 -0500
Re: World class DPMO
Blair Hogg
Tue, 30 Oct 2007 12:06:30 -0500
New Sender Bob Arciolla
ESD stenciling material for coating product
Bob Arciolla
Tue, 2 Oct 2007 08:13:08 -0500
ESD wrist strap testers.
Bob Arciolla
Tue, 30 Oct 2007 16:04:33 -0500
Fw: [TN] ESD stenciling material for coating product
Bob Arciolla
Wed, 3 Oct 2007 09:02:53 -0500
Re: Fw: [TN] ESD stenciling material for coating product
Bob Arciolla
Thu, 4 Oct 2007 13:35:46 -0500
New Sender Bob Perkins
unsubscribe
Bob Perkins
Fri, 5 Oct 2007 11:52:17 -0700
New Sender Brian Ellis
Re: cleaning concerns
Brian Ellis
Wed, 24 Oct 2007 09:51:23 +0300
Re: cleaning concerns
Brian Ellis
Wed, 24 Oct 2007 18:28:25 +0300
Re: cleaning concerns (OT)
Brian Ellis
Tue, 30 Oct 2007 09:16:55 +0200
Re: Cleaning of ESD Sensitive Circuit Boards
Brian Ellis
Tue, 2 Oct 2007 09:51:32 +0300
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Brian Ellis
Fri, 12 Oct 2007 09:45:19 +0300
Re: inner layer spacing for voltage
Brian Ellis
Mon, 15 Oct 2007 18:13:54 +0300
Re: Ionic Cleanliness
Brian Ellis
Tue, 2 Oct 2007 10:27:55 +0300
Re: No clean Flux for Class 3 products compatible with Conformal Coating
Brian Ellis
Wed, 24 Oct 2007 10:01:54 +0300
Re: operational sweet spot for no-clean flux
Brian Ellis
Thu, 4 Oct 2007 19:10:28 +0300
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Brian Ellis
Sun, 14 Oct 2007 13:06:37 +0300
Re: Thermocouple Longevity?
Brian Ellis
Wed, 3 Oct 2007 10:18:36 +0300
New Sender Brooks,Bill
Thermal vias and plugging ...
Brooks,Bill
Wed, 3 Oct 2007 11:51:02 -0700
Re: Thermal vias and plugging ...
Brooks,Bill
Wed, 3 Oct 2007 15:22:18 -0700
Re: Thermal vias and plugging ...
Brooks,Bill
Wed, 3 Oct 2007 16:48:57 -0700
Thru vias and plating thickness in the barrel ...
Brooks,Bill
Fri, 5 Oct 2007 10:19:52 -0700
Re: Thru vias and plating thickness in the barrel ...
Brooks,Bill
Fri, 5 Oct 2007 14:12:51 -0700
Via plugging with LPI soldermask...
Brooks,Bill
Tue, 2 Oct 2007 13:44:10 -0700
New Sender Carl Proescholdt
Re: RoHS solder and wetting plus thermal reliefs
Carl Proescholdt
Thu, 11 Oct 2007 11:19:39 -0500
Re: Thermocouple Longevity?
Carl Proescholdt
Tue, 2 Oct 2007 13:43:05 -0500
New Sender Chafin, Ken G.
Ionic Cleanliness
Chafin, Ken G.
Mon, 1 Oct 2007 15:47:04 -0400
Re: Ionic Cleanliness
Chafin, Ken G.
Mon, 1 Oct 2007 16:20:14 -0400
Re: Ionic Cleanliness
Chafin, Ken G.
Wed, 3 Oct 2007 09:02:27 -0400
Surface Mount Tantalum Capacitor Repair and Rework--Risks Involved
Chafin, Ken G.
Wed, 24 Oct 2007 11:22:06 -0400
New Sender Cheryl Tulkoff
Re: Delamination of lead free PCBs
Cheryl Tulkoff
Tue, 23 Oct 2007 12:35:55 -0500
Dye and Pry Vacuum Equipment Source/Recommendations
Cheryl Tulkoff
Thu, 25 Oct 2007 10:35:45 -0500
New Sender Chris Ball
Re: NTC test
Chris Ball
Tue, 2 Oct 2007 10:36:58 -0400
New Sender Chuck Brummer
Re: Is This a BAD Thing?
Chuck Brummer
Mon, 1 Oct 2007 12:04:40 -0700
New Sender Creswick, Steven
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Creswick, Steven
Thu, 11 Oct 2007 09:50:39 -0400
Re: JPL Publication 96-25
Creswick, Steven
Wed, 17 Oct 2007 05:55:51 -0400
Re: JPL Publication 96-25
Creswick, Steven
Wed, 17 Oct 2007 06:06:27 -0400
Re: Soldering on DBC
Creswick, Steven
Mon, 29 Oct 2007 05:32:05 -0400
New Sender Croslin, Robert
Re: Search for a prototype PCB shop
Croslin, Robert
Thu, 11 Oct 2007 11:15:38 -0400
New Sender Dale Ritzen
Re: IPC Sampling plan
Dale Ritzen
Tue, 16 Oct 2007 07:00:24 -0500
Re: RoHS solder and wetting plus thermal reliefs
Dale Ritzen
Tue, 9 Oct 2007 14:44:39 -0500
Re: RoHS solder and wetting plus thermal reliefs
Dale Ritzen
Tue, 9 Oct 2007 15:46:41 -0500
New Sender Dan Skweres
Re: PCB Material Question
Dan Skweres
Fri, 26 Oct 2007 15:27:34 -0400
Re: Search for a prototype PCB shop
Dan Skweres
Thu, 11 Oct 2007 10:30:42 -0400
New Sender Daniel Blass
Re: board material comparison
Daniel Blass
Mon, 22 Oct 2007 09:56:16 -0500
Re: SMT machine recommendation
Daniel Blass
Fri, 19 Oct 2007 15:27:31 -0500
New Sender Dave Schaefer
Re: Is This a BAD Thing?
Dave Schaefer
Wed, 3 Oct 2007 09:31:23 -0500
New Sender Dave Seymour
Re: Friday NTC - Cub Scout awards with lead in paint
Dave Seymour
Fri, 5 Oct 2007 09:53:00 -0400
New Sender Dave Simonik
Re: I don't expect much answers on this....
Dave Simonik
Mon, 1 Oct 2007 13:45:53 -0400
Re: Man who push envelope too much, go postal someday, said Dewey
Dave Simonik
Fri, 5 Oct 2007 13:39:56 -0400
New Sender David Suraski
Re: RoHS wire solder
David Suraski
Wed, 10 Oct 2007 16:50:26 -0400
New Sender David Tremmel
Re: Via plugging with LPI soldermask...
David Tremmel
Fri, 5 Oct 2007 09:32:27 -0500
New Sender Davis, Larry
Re: Lead-free HASL
Davis, Larry
Wed, 24 Oct 2007 12:46:54 -0700
New Sender Dennis Fritz
Re: Flux
Dennis Fritz
Wed, 31 Oct 2007 14:32:04 EDT
Re: IPC Test and Inspection Conference December 10-12 in San Jose, CA
Dennis Fritz
Wed, 17 Oct 2007 08:21:00 EDT
New Sender Donald Kyle
Re: non-corrosive rtv
Donald Kyle
Fri, 26 Oct 2007 14:58:16 -0500
Test
Donald Kyle
Mon, 15 Oct 2007 13:55:01 -0500
Test
Donald Kyle
Thu, 25 Oct 2007 06:40:46 -0500
Test
Donald Kyle
Thu, 25 Oct 2007 12:44:50 -0500
New Sender Donald Vischulis
Re: Mouuuuh!
Donald Vischulis
Fri, 12 Oct 2007 20:40:32 -0500
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Donald Vischulis
Sun, 14 Oct 2007 20:15:36 -0500
New Sender Douglas O. Pauls
Re: cleaning concerns
Douglas O. Pauls
Tue, 30 Oct 2007 08:27:51 -0500
Re: cleaning concerns
Douglas O. Pauls
Wed, 31 Oct 2007 11:44:48 -0500
Re: cleaning concerns
Douglas O. Pauls
Wed, 31 Oct 2007 14:02:20 -0500
New Sender ekalgren
Re: non-corrosive rtv
ekalgren
Fri, 26 Oct 2007 15:26:22 -0400
PCB Material Question
ekalgren
Fri, 26 Oct 2007 15:02:31 -0400
New Sender Eric Castonguay
Re: Stencil Printers 2D Paste Inspection
Eric Castonguay
Tue, 16 Oct 2007 07:04:41 -0700
Straddle mount connector
Eric Castonguay
Fri, 5 Oct 2007 08:05:30 -0700
World class DPMO
Eric Castonguay
Mon, 29 Oct 2007 05:20:13 -0700
New Sender Eric CHRISTISON
Recommend me a reflow oven
Eric CHRISTISON
Wed, 10 Oct 2007 12:10:33 +0100
New Sender Franklin D Asbell
Re: Delamination of lead free PCBs
Franklin D Asbell
Tue, 23 Oct 2007 12:39:19 -0500
Re: Delamination of lead free PCBs
Franklin D Asbell
Tue, 23 Oct 2007 15:19:19 -0500
Re: Delamination of lead free PCBs
Franklin D Asbell
Wed, 24 Oct 2007 05:26:04 -0500
Re: Delamination of lead free PCBs
Franklin D Asbell
Wed, 24 Oct 2007 12:53:23 -0500
Re: ESD wrist strap testers.
Franklin D Asbell
Tue, 30 Oct 2007 14:22:22 -0600
Re: MIL-P-55110D Amendment3
Franklin D Asbell
Tue, 30 Oct 2007 16:00:03 -0600
New Sender Garry Foskett
Re: NTC test
Garry Foskett
Tue, 2 Oct 2007 15:39:02 +0100
New Sender Gene Felder
Re: ESD wrist strap testers.
Gene Felder
Tue, 30 Oct 2007 13:53:03 -0700
Re: Shielding for BGA rework
Gene Felder
Thu, 11 Oct 2007 13:23:10 -0700
New Sender Genny Gibbard
Re: cleaning concerns
Genny Gibbard
Wed, 31 Oct 2007 13:31:37 -0600
Re: ESD wrist strap testers.
Genny Gibbard
Tue, 30 Oct 2007 14:24:58 -0600
Re: inner layer spacing for voltage
Genny Gibbard
Mon, 15 Oct 2007 13:36:32 -0600
Re: RoHS wire solder
Genny Gibbard
Wed, 10 Oct 2007 09:19:41 -0600
Second sources - generic components
Genny Gibbard
Fri, 19 Oct 2007 11:33:43 -0600
Re: Second sources - generic components
Genny Gibbard
Mon, 22 Oct 2007 11:41:17 -0600
Shielding for BGA rework
Genny Gibbard
Thu, 11 Oct 2007 13:06:18 -0600
Re: Shielding for BGA rework
Genny Gibbard
Thu, 11 Oct 2007 13:47:29 -0600
New Sender George Milad
Re: Thru vias and plating thickness in the barrel ...
George Milad
Fri, 5 Oct 2007 14:30:04 EDT
New Sender Gervascio, Thomas
BGA underfill quality standards
Gervascio, Thomas
Fri, 5 Oct 2007 10:08:20 -0400
Re: Friday NTC - Cub Scout awards with lead in paint
Gervascio, Thomas
Fri, 5 Oct 2007 09:55:26 -0400
Search for a prototype PCB shop
Gervascio, Thomas
Thu, 11 Oct 2007 09:57:50 -0400
Small solder balls
Gervascio, Thomas
Fri, 12 Oct 2007 14:37:53 -0400
Re: SMT machine recommendation
Gervascio, Thomas
Fri, 19 Oct 2007 15:14:47 -0400
Solder paste slump patterns
Gervascio, Thomas
Fri, 19 Oct 2007 15:18:23 -0400
Re: SV: [TN] Thermocouple Longevity?
Gervascio, Thomas
Wed, 3 Oct 2007 07:26:55 -0400
New Sender Graham Collins
Re: cleaning concerns
Graham Collins
Tue, 30 Oct 2007 11:14:06 -0300
Re: cleaning concerns
Graham Collins
Wed, 31 Oct 2007 14:11:52 -0300
Re: SMT machine recommendation
Graham Collins
Fri, 19 Oct 2007 12:27:24 -0300
New Sender Graham Naisbitt
Re: Meniscograph manual wanted
Graham Naisbitt
Wed, 24 Oct 2007 15:17:56 +0100
Re: No clean Flux for Class 3 products compatible with Conformal Coating
Graham Naisbitt
Wed, 24 Oct 2007 15:21:57 +0100
NTC - California fire-storm
Graham Naisbitt
Wed, 24 Oct 2007 17:47:13 +0100
New Sender Graham Wilson
Re: RoHS wire solder
Graham Wilson
Tue, 9 Oct 2007 08:53:15 +0100
Re: Shielding for BGA rework
Graham Wilson
Fri, 12 Oct 2007 09:15:30 +0100
New Sender Grant Emandien
Possible heat damage to LEDs during soldering
Grant Emandien
Mon, 29 Oct 2007 12:16:50 +0200
New Sender Green, Mike
Re: IPC potting guidelines
Green, Mike
Thu, 4 Oct 2007 14:33:29 -0600
Re: Screwing to a PWB
Green, Mike
Wed, 10 Oct 2007 12:07:29 -0600
New Sender Guenter Grossmann
Antw: [TN] SV: [TN] Is This a BAD Thing?
Guenter Grossmann
Tue, 2 Oct 2007 09:17:33 +0200
New Sender Gumpert, Ben
NTC: RE: cleaning concerns
Gumpert, Ben
Wed, 31 Oct 2007 05:55:33 -0400
Re: Samtec SMT Connector Woe's...(again)
Gumpert, Ben
Wed, 31 Oct 2007 06:11:23 -0400
Re: Small solder balls
Gumpert, Ben
Mon, 15 Oct 2007 08:59:19 -0400
Re: Stencil Printers 2D Paste Inspection
Gumpert, Ben
Tue, 16 Oct 2007 06:20:27 -0400
New Sender Guy Ramsey
Re: cleaning concerns
Guy Ramsey
Wed, 24 Oct 2007 08:50:54 -0400
Re: Delamination of lead free PCBs
Guy Ramsey
Tue, 23 Oct 2007 12:32:21 -0400
Re: Delamination of lead free PCBs
Guy Ramsey
Tue, 23 Oct 2007 15:51:16 -0400
Re: Flux
Guy Ramsey
Wed, 31 Oct 2007 13:30:58 -0400
Re: Flux
Guy Ramsey
Wed, 31 Oct 2007 14:48:08 -0400
Re: Ionic Cleanliness
Guy Ramsey
Mon, 1 Oct 2007 15:54:23 -0400
Re: Is This a BAD Thing?
Guy Ramsey
Mon, 1 Oct 2007 13:31:06 -0400
NTC test
Guy Ramsey
Mon, 1 Oct 2007 10:50:04 -0400
Re: operational sweet spot for no-clean flux
Guy Ramsey
Thu, 4 Oct 2007 13:51:10 -0400
Re: RoHS solder and wetting plus thermal reliefs
Guy Ramsey
Tue, 9 Oct 2007 15:45:46 -0400
Re: RoHS solder and wetting plus thermal reliefs
Guy Ramsey
Tue, 9 Oct 2007 15:45:46 -0400
Re: RoHS solder and wetting plus thermal reliefs
Guy Ramsey
Wed, 10 Oct 2007 08:30:37 -0400
Re: SV: [TN] Thermocouple Longevity?
Guy Ramsey
Wed, 3 Oct 2007 09:09:16 -0400
Re: Thermocouple Longevity?
Guy Ramsey
Tue, 2 Oct 2007 14:36:37 -0400
Re: World class DPMO
Guy Ramsey
Tue, 30 Oct 2007 11:44:32 -0400
New Sender Haynes, Kim
Re: Installing Press-fit Connectors AFTER Conformal Coating?
Haynes, Kim
Wed, 10 Oct 2007 08:53:44 -0500
Re: Via plugging with LPI soldermask...
Haynes, Kim
Wed, 3 Oct 2007 11:11:12 -0500
New Sender Hernefjord Ingemar
Re: cleaning concerns
Hernefjord Ingemar
Tue, 30 Oct 2007 08:50:56 +0100
Re: cleaning concerns
Hernefjord Ingemar
Wed, 31 Oct 2007 16:12:24 +0100
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Hernefjord Ingemar
Thu, 11 Oct 2007 14:02:28 +0200
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Hernefjord Ingemar
Fri, 12 Oct 2007 08:14:08 +0200
JPL Publication 96-25
Hernefjord Ingemar
Wed, 17 Oct 2007 09:08:56 +0200
Re: JPL Publication 96-25
Hernefjord Ingemar
Wed, 17 Oct 2007 12:34:16 +0200
Re: Mouuuuh!
Hernefjord Ingemar
Mon, 15 Oct 2007 08:41:49 +0200
nano manipulator
Hernefjord Ingemar
Fri, 26 Oct 2007 13:02:21 +0200
Re: nano manipulator
Hernefjord Ingemar
Fri, 26 Oct 2007 14:57:18 +0200
Re: Soldering on DBC
Hernefjord Ingemar
Fri, 26 Oct 2007 15:26:04 +0200
Re: SV: [TN] Thermocouple Longevity?
Hernefjord Ingemar
Wed, 3 Oct 2007 08:46:10 +0200
Re: SV: [TN] Thermocouple Longevity?
Hernefjord Ingemar
Wed, 3 Oct 2007 15:18:10 +0200
New Sender Hfjord
I don't expect much answers on this....
Hfjord
Mon, 1 Oct 2007 18:58:00 +0200
Man who push envelope too much, go postal someday, said Dewey
Hfjord
Fri, 5 Oct 2007 19:14:28 +0200
Mouuuuh!
Hfjord
Fri, 12 Oct 2007 20:15:02 +0200
SV: I don't expect much answers on this....
Hfjord
Mon, 1 Oct 2007 21:30:55 +0200
SV: [TN] Component pins plating thickness
Hfjord
Sun, 28 Oct 2007 10:33:31 +0100
SV: [TN] I don't expect much answers on this....
Hfjord
Mon, 1 Oct 2007 21:45:33 +0200
SV: [TN] inner layer spacing for voltage
Hfjord
Mon, 15 Oct 2007 21:20:13 +0200
SV: [TN] Ionic Cleanliness
Hfjord
Mon, 1 Oct 2007 21:57:39 +0200
SV: [TN] Is This a BAD Thing?
Hfjord
Mon, 1 Oct 2007 19:11:50 +0200
SV: [TN] Is This a BAD Thing?
Hfjord
Tue, 2 Oct 2007 20:30:57 +0200
SV: [TN] Man who push envelope too much, go postal someday, said Dewey
Hfjord
Sun, 7 Oct 2007 17:20:50 +0200
SV: [TN] Mouuuuh!
Hfjord
Fri, 12 Oct 2007 20:50:48 +0200
SV: [TN] SMT machine recommendation
Hfjord
Fri, 19 Oct 2007 21:37:34 +0200
SV: [TN] SV: [TN] I don't expect much answers on this....
Hfjord
Mon, 1 Oct 2007 22:14:30 +0200
SV: [TN] SV: [TN] Mouuuuh!
Hfjord
Fri, 12 Oct 2007 21:26:35 +0200
SV: [TN] SV: [TN] SV: [TN] Mouuuuh!
Hfjord
Fri, 12 Oct 2007 22:11:46 +0200
SV: [TN] SV: [TN] Thermocouple Longevity?
Hfjord
Wed, 3 Oct 2007 20:42:54 +0200
SV: [TN] Thermocouple Longevity?
Hfjord
Tue, 2 Oct 2007 22:11:38 +0200
SV: [TN] Thermocouple Longevity?
Hfjord
Tue, 2 Oct 2007 22:32:29 +0200
SV: [TN] Thermocouple Longevity?
Hfjord
Tue, 2 Oct 2007 22:35:34 +0200
SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Hfjord
Sat, 13 Oct 2007 22:52:24 +0200
SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Hfjord
Sat, 13 Oct 2007 23:03:31 +0200
New Sender Ian Hanna
Re: Delamination of lead free PCBs
Ian Hanna
Wed, 24 Oct 2007 08:47:59 -0400
Re: Delamination of lead free PCBs
Ian Hanna
Wed, 24 Oct 2007 09:12:39 -0400
Re: Is This a BAD Thing?
Ian Hanna
Mon, 1 Oct 2007 14:15:33 -0400
Re: Is This a BAD Thing?
Ian Hanna
Mon, 1 Oct 2007 14:34:01 -0400
Re: Is This a BAD Thing?
Ian Hanna
Mon, 1 Oct 2007 15:17:30 -0400
New Sender Igoshev, Vladimir
Re: "Mixed" Soldering Process
Igoshev, Vladimir
Mon, 15 Oct 2007 14:51:21 -0400
Re: BGA Intermetallic failure
Igoshev, Vladimir
Mon, 1 Oct 2007 10:28:40 -0400
New Sender IPCmail
Correction - Materials Declaration Webcast on Thursday, October 25, from 11:30 am - 12:00 pm (DST)
IPCmail
Mon, 22 Oct 2007 15:39:54 -0500
New Sender Ivanoe Pedruzzi
Re: RoHS wire solder
Ivanoe Pedruzzi
Thu, 18 Oct 2007 12:43:24 -0000
New Sender Jack Crawford
Re: IPC potting guidlines
Jack Crawford
Wed, 3 Oct 2007 17:05:34 -0500
New Sender Jack Olson
Bare-Board Materials for Lead-Free Soldering
Jack Olson
Mon, 29 Oct 2007 12:28:17 -0500
Is This a BAD Thing?
Jack Olson
Mon, 1 Oct 2007 11:55:40 -0500
Re: Is This a BAD Thing?
Jack Olson
Tue, 2 Oct 2007 11:22:32 -0500
New Sender Jerry Dengler
Re: operational sweet spot for no-clean flux
Jerry Dengler
Thu, 4 Oct 2007 14:17:17 -0400
New Sender Joe Macko
verifying BGA underfill coverage
Joe Macko
Wed, 31 Oct 2007 16:34:17 -0700
New Sender Joe Russeau
Re: cleaning concerns
Joe Russeau
Wed, 31 Oct 2007 14:19:46 -0400
Re: cleaning concerns
Joe Russeau
Wed, 31 Oct 2007 14:21:57 -0400
Re: cleaning concerns
Joe Russeau
Wed, 31 Oct 2007 14:26:22 -0400
Re: cleaning concerns
Joe Russeau
Wed, 31 Oct 2007 16:23:29 -0400
Re: Ionic Cleanliness - Clean No-Clean
Joe Russeau
Wed, 3 Oct 2007 11:05:52 -0400
New Sender Joel Alexander
Delamination of lead free PCBs
Joel Alexander
Tue, 23 Oct 2007 12:23:09 -0400
Re: Delamination of lead free PCBs
Joel Alexander
Wed, 24 Oct 2007 08:54:18 -0400
Joel Alexander is out of the office.
Joel Alexander
Fri, 12 Oct 2007 16:56:16 -0400
Joel Alexander is out of the office.
Joel Alexander
Fri, 12 Oct 2007 17:07:50 -0400
UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office.
Joel Alexander
Fri, 12 Oct 2007 17:12:49 -0400
New Sender John Burke
FW: FAQ on Korean RoHS/WEEE/ELV available
John Burke
Tue, 23 Oct 2007 06:13:12 -0700
Inner layer spacing for reliability
John Burke
Mon, 15 Oct 2007 13:44:43 -0700
Re: Meniscograph manual wanted
John Burke
Tue, 23 Oct 2007 17:04:09 -0700
Tin alloys and REACH
John Burke
Wed, 24 Oct 2007 08:04:57 -0700
FW: [LF] China RoHS Comparative Summary?
John Burke
Thu, 11 Oct 2007 11:28:34 -0700
FW: [LF] RoHS prosecution
John Burke
Wed, 17 Oct 2007 11:00:50 -0700
New Sender John Foster
Re: Thermal vias and plugging ...
John Foster
Wed, 3 Oct 2007 15:34:59 -0700
Re: Thermal vias and plugging ...
John Foster
Thu, 4 Oct 2007 09:06:29 -0700
New Sender John Maxwell
Re: RMA Fluxes in High Voltage Applications
John Maxwell
Wed, 31 Oct 2007 16:47:48 -0700
New Sender John Parsons
Metal Dome Switches
John Parsons
Tue, 2 Oct 2007 13:32:24 -0700
New Sender John Queen
Re: SMT machine recommendation
John Queen
Fri, 19 Oct 2007 23:48:35 +0000
Re: SV: [TN] SMT machine recommendation
John Queen
Fri, 19 Oct 2007 23:51:17 +0000
New Sender Juan T. Marugán
Cracks in the body of glass diodes (JANTX1N4148UR1)
Juan T. Marugán
Thu, 11 Oct 2007 05:25:12 -0500
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Juan T. Marugán
Thu, 11 Oct 2007 16:33:22 -0500
New Sender Karl Hunsinger
IPC potting guidlines
Karl Hunsinger
Wed, 3 Oct 2007 15:27:40 -0400
Re: [BULK] [TN] IPC Test and Inspection Conference December 10-12 in San Jose, CA
Karl Hunsinger
Wed, 17 Oct 2007 06:32:41 -0400
New Sender Kathy Kuhlow
Re: Samtec SMT Connector Woe's...(again)
Kathy Kuhlow
Tue, 30 Oct 2007 15:12:17 -0500
New Sender Kerry McMullen
Re: PWB-Hole Plating for Press-Fit Connectors
Kerry McMullen
Wed, 17 Oct 2007 10:01:38 -0400
New Sender Kevin Glidden
Re: Installing Press-fit Connectors AFTER Conformal Coating?
Kevin Glidden
Wed, 10 Oct 2007 11:21:01 -0400
[NTC] New Words
Kevin Glidden
Fri, 12 Oct 2007 16:34:37 -0400
New Sender Lee parker
Re: Inner layer spacing for reliability
Lee parker
Wed, 17 Oct 2007 18:02:41 -0400
Re: Thru vias and plating thickness in the barrel ...
Lee parker
Sat, 6 Oct 2007 12:42:03 -0400
New Sender Leland Woodall
Re: No clean Flux for Class 3 products compatible with Conformal Coating
Leland Woodall
Wed, 24 Oct 2007 10:17:28 -0400
Re: World class DPMO
Leland Woodall
Tue, 30 Oct 2007 16:18:15 -0400
New Sender Leo Higgins
Re: Dissolving SOIC casing
Leo Higgins
Thu, 11 Oct 2007 14:36:35 -0700
Re: Shielding for BGA rework
Leo Higgins
Thu, 11 Oct 2007 14:33:52 -0700
Re: Shielding for BGA rework
Leo Higgins
Thu, 11 Oct 2007 14:48:04 -0700
Re: Silicon Solar Cells
Leo Higgins
Fri, 26 Oct 2007 09:51:59 -0700
Re: SV: [TN] Mouuuuh!
Leo Higgins
Fri, 12 Oct 2007 12:19:46 -0700
New Sender Linda Langley
cleaning concerns
Linda Langley
Tue, 23 Oct 2007 14:39:53 -0400
New Sender Louis Guérin
Re: PCB Material Question
Louis Guérin
Mon, 29 Oct 2007 09:21:11 -0400
New Sender Louis Hart
Re: IPC Sampling plan
Louis Hart
Tue, 16 Oct 2007 09:35:27 -0400
Re: Search for a prototype PCB shop
Louis Hart
Thu, 11 Oct 2007 11:38:42 -0400
New Sender Luan Nguyen
Evaluation method of Solder Paste
Luan Nguyen
Wed, 17 Oct 2007 09:40:16 +0700
New Sender Matt Kehoe, SIPAD Systems
Re: Lead-free HASL
Matt Kehoe, SIPAD Systems
Thu, 25 Oct 2007 17:11:30 -0400
New Sender Matthias Mansfeld
Re: Mouuuuh!
Matthias Mansfeld
Fri, 12 Oct 2007 23:03:26 +0200
New Sender McGlaughlin, Jeffrey A
Re: inner layer spacing for voltage
McGlaughlin, Jeffrey A
Mon, 15 Oct 2007 10:48:49 -0400
Re: PCB Material Question
McGlaughlin, Jeffrey A
Fri, 26 Oct 2007 16:10:33 -0400
Re: Standard Interpretation
McGlaughlin, Jeffrey A
Fri, 19 Oct 2007 11:56:45 -0400
New Sender Michelle Michelotti
Sign up Today for IPC's Materials Declaration Webcast on Thursday, November 25 from 11:30 am - 12:00 pm (DST)
Michelle Michelotti
Mon, 22 Oct 2007 15:26:35 -0500
Via Hole Filling Technology and Processes Webcast Series, 11/1/2007 & 11/08/2007
Michelle Michelotti
Thu, 18 Oct 2007 11:06:42 -0500
New Sender Miguel Vallejo
Re: Is This a BAD Thing?
Miguel Vallejo
Mon, 1 Oct 2007 10:28:06 -0700
New Sender Mike Fenner
Re: cleaning concerns
Mike Fenner
Wed, 31 Oct 2007 15:07:23 -0000
New Sender N Burtt
Re: PWB-Hole Plating for Press-Fit Connectors
N Burtt
Wed, 17 Oct 2007 06:22:27 -0500
Re: RoHS wire solder
N Burtt
Wed, 10 Oct 2007 06:33:23 -0500
New Sender Neil Maloney
Re: RoHS wire solder
Neil Maloney
Tue, 9 Oct 2007 10:41:11 -0500
Re: Thermocouple Longevity?
Neil Maloney
Tue, 2 Oct 2007 13:29:57 -0500
New Sender Nimal Liyanage
Re: Lead-free HASL
Nimal Liyanage
Wed, 24 Oct 2007 10:49:02 -0700
New Sender P. Langeveld
Re: BGA Intermetallic failure
P. Langeveld
Mon, 1 Oct 2007 16:33:47 +0200
Re: Component pins plating thickness
P. Langeveld
Fri, 26 Oct 2007 16:48:05 +0200
Re: Component pins plating thickness
P. Langeveld
Fri, 26 Oct 2007 17:30:46 +0200
Re: Recommend me a reflow oven
P. Langeveld
Wed, 10 Oct 2007 13:47:08 +0200
Re: Small solder balls
P. Langeveld
Sat, 13 Oct 2007 09:47:36 +0200
New Sender Paul Edwards
Re: BGA Intermetallic failure
Paul Edwards
Mon, 1 Oct 2007 09:29:24 -0700
New Sender Paul P Greene
MIL-P-55110D Amendment3
Paul P Greene
Tue, 30 Oct 2007 15:13:26 -0500
New Sender Paymon Sani
Re: RoHS solder and wetting plus thermal reliefs
Paymon Sani
Tue, 9 Oct 2007 16:50:47 -0400
Re: RoHS solder and wetting plus thermal reliefs
Paymon Sani
Wed, 10 Oct 2007 11:37:45 -0400
Re: Thermocouple Longevity?
Paymon Sani
Tue, 2 Oct 2007 16:34:49 -0400
Re: URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Paymon Sani
Mon, 15 Oct 2007 11:11:41 -0400
New Sender peter blokhuis
Meniscograph manual wanted
peter blokhuis
Tue, 23 Oct 2007 14:50:38 -0700
Re: Meniscograph manual wanted
peter blokhuis
Wed, 24 Oct 2007 07:44:45 -0700
New Sender Peter Swanson
Re: non-corrosive rtv
Peter Swanson
Sat, 27 Oct 2007 12:39:15 +0100
New Sender Phil Nutting
board material comparison
Phil Nutting
Mon, 22 Oct 2007 10:15:36 -0400
Re: cleaning concerns
Phil Nutting
Mon, 29 Oct 2007 16:11:35 -0400
inner layer spacing for voltage
Phil Nutting
Mon, 15 Oct 2007 10:29:18 -0400
IPC 1066 clarification
Phil Nutting
Fri, 12 Oct 2007 08:54:37 -0400
Lead-free HASL
Phil Nutting
Wed, 24 Oct 2007 12:13:22 -0400
Re: Mouuuuh!
Phil Nutting
Fri, 12 Oct 2007 14:22:06 -0400
Re: Need a recommendation for masking tape for conformal coating
Phil Nutting
Thu, 18 Oct 2007 08:18:45 -0400
Re: non-corrosive rtv
Phil Nutting
Fri, 26 Oct 2007 16:50:36 -0400
Oops... RE: [TN] Need a recommendation for masking tape for conformal coating
Phil Nutting
Thu, 18 Oct 2007 08:21:13 -0400
operational sweet spot for no-clean flux
Phil Nutting
Thu, 4 Oct 2007 11:54:31 -0400
Re: operational sweet spot for no-clean flux
Phil Nutting
Thu, 4 Oct 2007 12:47:39 -0400
RoHS solder and wetting plus thermal reliefs
Phil Nutting
Tue, 9 Oct 2007 15:10:02 -0400
Re: RoHS solder and wetting plus thermal reliefs
Phil Nutting
Wed, 10 Oct 2007 08:38:27 -0400
Re: RoHS solder and wetting plus thermal reliefs
Phil Nutting
Thu, 11 Oct 2007 09:53:13 -0400
Re: RoHS solder and wetting plus thermal reliefs
Phil Nutting
Thu, 11 Oct 2007 12:26:52 -0400
Re: RoHS wire solder
Phil Nutting
Wed, 10 Oct 2007 07:54:55 -0400
Re: RoHS wire solder
Phil Nutting
Wed, 10 Oct 2007 11:32:27 -0400
Re: Trimming left over excess "mouse bites"
Phil Nutting
Thu, 25 Oct 2007 08:20:48 -0400
New Sender Phil Zarrow
Re: Stencil Printers 2D Paste Inspection
Phil Zarrow
Mon, 22 Oct 2007 08:27:05 EDT
Re: Stencil Printers 2D Paste Inspection
Phil Zarrow
Mon, 22 Oct 2007 08:31:41 EDT
New Sender Phillip Bavaro
Package on Package (PoP) processing
Phillip Bavaro
Thu, 11 Oct 2007 13:52:41 -0700
New Sender prashant chopra
SMT machine recommendation
prashant chopra
Fri, 19 Oct 2007 13:55:35 +0100
Re: SMT machine recommendation
prashant chopra
Mon, 22 Oct 2007 13:44:09 +0100
New Sender R Sedlak
Re: cleaning concerns
R Sedlak
Tue, 23 Oct 2007 14:56:59 -0700
Re: Dissolving SOIC casing
R Sedlak
Thu, 11 Oct 2007 10:55:53 -0700
Re: I don't expect much answers on this....
R Sedlak
Mon, 1 Oct 2007 10:59:42 -0700
Looking for Dale Kersten
R Sedlak
Mon, 8 Oct 2007 12:08:49 -0700
Re: PWB-Hole Plating for Press-Fit Connectors
R Sedlak
Wed, 17 Oct 2007 07:28:28 -0700
New Sender Randy Bock Sr.
Re: NTC - California fire-storm
Randy Bock Sr.
Thu, 25 Oct 2007 06:08:06 -0400
Re: Test
Randy Bock Sr.
Thu, 25 Oct 2007 07:43:10 -0400
Re: Test
Randy Bock Sr.
Thu, 25 Oct 2007 13:46:30 -0400
New Sender Richard Kraszewski
Re: Ionic Cleanliness
Richard Kraszewski
Mon, 1 Oct 2007 14:52:41 -0500
Re: IPC potting guidlines
Richard Kraszewski
Wed, 3 Oct 2007 14:32:33 -0500
RMA Fluxes in High Voltage Applications
Richard Kraszewski
Wed, 31 Oct 2007 18:01:26 -0500
Re: SV: [TN] Ionic Cleanliness
Richard Kraszewski
Mon, 1 Oct 2007 15:04:21 -0500
New Sender Roberts, Jon
STRANDED WIRE EXPOSED THROUGH INSULATION
Roberts, Jon
Fri, 12 Oct 2007 14:33:00 -0500
New Sender Roger Stoops
Re: Mouuuuh!
Roger Stoops
Fri, 12 Oct 2007 14:23:24 -0400
New Sender Roland Jaquet
Ionic Cleanliness - Clean No-Clean
Roland Jaquet
Wed, 3 Oct 2007 15:31:58 +0200
New Sender Scott Lefebvre
Stencil Printers 2D Paste Inspection
Scott Lefebvre
Mon, 15 Oct 2007 08:42:27 -0700
Re: Stencil Printers 2D Paste Inspection
Scott Lefebvre
Tue, 23 Oct 2007 09:28:21 -0700
New Sender Scott Westheimer
Re: Delamination of lead free PCBs
Scott Westheimer
Tue, 23 Oct 2007 12:31:53 -0400
New Sender Stadem, Richard D.
Re: cleaning concerns
Stadem, Richard D.
Wed, 31 Oct 2007 11:36:09 -0500
Re: cleaning concerns
Stadem, Richard D.
Wed, 31 Oct 2007 11:48:15 -0500
Re: cleaning concerns
Stadem, Richard D.
Wed, 31 Oct 2007 14:34:17 -0500
Re: Cleaning of ESD Sensitive Circuit Boards
Stadem, Richard D.
Mon, 1 Oct 2007 17:22:16 -0500
Re: Delamination of lead free PCBs
Stadem, Richard D.
Tue, 23 Oct 2007 15:18:15 -0500
Re: Flux
Stadem, Richard D.
Wed, 31 Oct 2007 13:01:35 -0500
Re: Is This a BAD Thing?
Stadem, Richard D.
Mon, 1 Oct 2007 13:14:46 -0500
Re: Is This a BAD Thing?
Stadem, Richard D.
Mon, 1 Oct 2007 13:18:40 -0500
Re: NTC test
Stadem, Richard D.
Tue, 2 Oct 2007 09:28:02 -0500
Re: Recommend me a reflow oven
Stadem, Richard D.
Wed, 10 Oct 2007 07:32:42 -0500
Re: RoHS solder and wetting plus thermal reliefs
Stadem, Richard D.
Wed, 10 Oct 2007 09:33:53 -0500
Re: RoHS wire solder
Stadem, Richard D.
Wed, 10 Oct 2007 15:58:23 -0500
Re: Samtec SMT Connector Woe's...(again)
Stadem, Richard D.
Tue, 30 Oct 2007 16:03:04 -0500
Re: Samtec SMT Connector Woe's...(again)
Stadem, Richard D.
Tue, 30 Oct 2007 16:14:26 -0500
Re: Shielding for BGA rework
Stadem, Richard D.
Thu, 11 Oct 2007 14:34:59 -0500
Re: Shielding for BGA rework
Stadem, Richard D.
Thu, 11 Oct 2007 16:46:11 -0500
Re: Silicon Solar Cells
Stadem, Richard D.
Fri, 26 Oct 2007 14:01:24 -0500
Re: Small solder balls
Stadem, Richard D.
Mon, 15 Oct 2007 10:31:03 -0500
Re: Surface Mount Tantalum Capacitor Repair and Rework--Risks Involved
Stadem, Richard D.
Wed, 24 Oct 2007 12:37:34 -0500
Re: Thermocouple Longevity?
Stadem, Richard D.
Tue, 2 Oct 2007 13:59:40 -0500
Re: Trimming left over excess "mouse bites"
Stadem, Richard D.
Thu, 25 Oct 2007 07:42:29 -0500
Re: Trimming left over excess "mouse bites"
Stadem, Richard D.
Thu, 25 Oct 2007 08:15:17 -0500
New Sender Steve Gregory
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Steve Gregory
Thu, 11 Oct 2007 07:37:34 -0500
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Steve Gregory
Thu, 11 Oct 2007 07:46:40 -0500
Installing Press-fit Connectors AFTER Conformal Coating?
Steve Gregory
Wed, 10 Oct 2007 08:40:25 -0500
Re: Need a recommendation for masking tape for conformal coating
Steve Gregory
Thu, 18 Oct 2007 07:08:29 -0500
Re: RoHS wire solder
Steve Gregory
Tue, 9 Oct 2007 07:56:28 -0500
Samtec SMT Connector Woe's...(again)
Steve Gregory
Tue, 30 Oct 2007 14:51:58 -0500
Re: Samtec SMT Connector Woe's...(again)
Steve Gregory
Tue, 30 Oct 2007 21:16:12 +0000
Re: Small solder balls
Steve Gregory
Fri, 12 Oct 2007 15:17:12 -0500
Re: Small solder balls
Steve Gregory
Mon, 15 Oct 2007 09:25:57 -0500
Re: Straddle mount connector
Steve Gregory
Fri, 5 Oct 2007 10:38:56 -0500
Thermocouple Longevity?
Steve Gregory
Tue, 2 Oct 2007 13:03:48 -0500
Re: Fw: [TN] ESD stenciling material for coating product
Steve Gregory
Wed, 3 Oct 2007 08:30:28 -0500
New Sender Steve Kelly
Re: Samtec SMT Connector Woe's...(again)
Steve Kelly
Tue, 30 Oct 2007 17:54:11 -0400
New Sender Sue Powers-Hartman
Flux
Sue Powers-Hartman
Wed, 31 Oct 2007 11:35:36 -0500
New Sender Susan Hott
Dissolving SOIC casing
Susan Hott
Thu, 11 Oct 2007 13:08:58 -0400
Re: Dissolving SOIC casing
Susan Hott
Thu, 11 Oct 2007 14:20:35 -0400
New Sender Ted Kong
PCB supplier listing
Ted Kong
Mon, 15 Oct 2007 13:41:30 -0700
New Sender Ted Tontis
Re: SV: [TN] SV: [TN] Mouuuuh!
Ted Tontis
Fri, 12 Oct 2007 14:57:32 -0500
Re: SV: [TN] SV: [TN] SV: [TN] Mouuuuh!
Ted Tontis
Fri, 12 Oct 2007 16:05:28 -0500
Re: Via plugging with LPI soldermask...
Ted Tontis
Wed, 3 Oct 2007 10:19:45 -0500
Re: Via plugging with LPI soldermask...
Ted Tontis
Wed, 3 Oct 2007 12:37:19 -0500
Re: Via plugging with LPI soldermask...
Ted Tontis
Thu, 4 Oct 2007 16:44:47 -0500
Re: Via plugging with LPI soldermask...
Ted Tontis
Fri, 5 Oct 2007 09:21:09 -0500
Re: Via plugging with LPI soldermask...
Ted Tontis
Fri, 5 Oct 2007 11:25:18 -0500
New Sender Tempea, Ioan
Re: cleaning concerns
Tempea, Ioan
Tue, 23 Oct 2007 15:22:32 -0400
Component pins plating thickness
Tempea, Ioan
Fri, 26 Oct 2007 08:54:00 -0400
Re: Component pins plating thickness
Tempea, Ioan
Fri, 26 Oct 2007 11:11:26 -0400
Re: Ionic Cleanliness
Tempea, Ioan
Mon, 1 Oct 2007 15:53:06 -0400
Re: Is This a BAD Thing?
Tempea, Ioan
Mon, 1 Oct 2007 13:58:26 -0400
Re: SMT machine recommendation
Tempea, Ioan
Fri, 19 Oct 2007 09:10:48 -0400
Wave soldering of diodes
Tempea, Ioan
Wed, 3 Oct 2007 11:47:35 -0400
New Sender Terry Kozlyk
The Only PCB Book you will Ever Need
Terry Kozlyk
Wed, 31 Oct 2007 21:38:40 -0600
New Sender Terry L. Munson
Re: cleaning concerns
Terry L. Munson
Mon, 29 Oct 2007 17:33:36 EDT
New Sender Thayer, Wayne
BGA Intermetallic failure
Thayer, Wayne
Mon, 1 Oct 2007 09:38:34 -0400
Re: BGA Intermetallic failure
Thayer, Wayne
Mon, 1 Oct 2007 22:39:50 -0400
Re: Dissolving SOIC casing
Thayer, Wayne
Thu, 11 Oct 2007 18:36:04 -0400
Re: No clean Flux for Class 3 products compatible with Conformal Coating
Thayer, Wayne
Tue, 23 Oct 2007 13:08:42 -0400
Re: Samtec SMT Connector Woe's...(again)
Thayer, Wayne
Wed, 31 Oct 2007 07:09:48 -0400
Re: SMT machine recommendation
Thayer, Wayne
Fri, 19 Oct 2007 10:30:15 -0400
Re: Surface Mount Tantalum Capacitor Repair and Rework--Risks Involved
Thayer, Wayne
Wed, 24 Oct 2007 21:48:39 -0400
Re: Trimming left over excess "mouse bites"
Thayer, Wayne
Wed, 24 Oct 2007 22:11:05 -0400
Re: Trimming left over excess "mouse bites"
Thayer, Wayne
Thu, 25 Oct 2007 09:07:42 -0400
Re: Trimming left over excess "mouse bites"
Thayer, Wayne
Thu, 25 Oct 2007 09:17:39 -0400
New Sender Thomas, Ian (Ian) %
Re: Delamination of lead free PCBs
Thomas, Ian (Ian) %
Wed, 24 Oct 2007 08:46:15 +0100
New Sender Tina Nerad
Design for Assembly Workshop, November 12-13, 2007 - Houston, TX
Tina Nerad
Mon, 1 Oct 2007 10:22:10 -0500
IPC Design for Assembly Workshop, November 12-13, 2007, Houston, TX
Tina Nerad
Wed, 10 Oct 2007 13:53:52 -0500
IPC Design Methodology Checkup Webcast, October 25, 2007 10:00 am - 11:00 am (CT)
Tina Nerad
Fri, 5 Oct 2007 12:25:42 -0500
IPC Design Methodology Checkup Webcast, October 25, 2007 10:00 am - 11:00 am (DST)
Tina Nerad
Wed, 17 Oct 2007 10:44:54 -0500
IPC Design Methodology Checkup Webcast, October 25, 2007 10:00 am - 11:00 am (DST)
Tina Nerad
Mon, 22 Oct 2007 09:52:29 -0500
IPC Materials Declaration Workshop Series - 12/3/07 & 12/6/07, Austin, TX
Tina Nerad
Fri, 5 Oct 2007 08:38:27 -0500
IPC Materials Declaration Workshop Series - November 27 & 28, 2007, in San Jose, CA
Tina Nerad
Mon, 29 Oct 2007 10:20:53 -0500
IPC Materials Declaration workshop series - November 27 & 28, 2007, San Jose, CA
Tina Nerad
Tue, 23 Oct 2007 10:22:08 -0500
IPC Materials Declaration Workshop Series, December 3 & 6, 2007, in Austin, TX
Tina Nerad
Fri, 12 Oct 2007 10:25:08 -0500
IPC Materials Declaration Workshop Series, November 12 & 13, 2007, in Bannockburn, IL
Tina Nerad
Fri, 19 Oct 2007 11:53:35 -0500
IPC Materials Declaration Workshop Series, November 12 & 13, 2007, in Bannockburn, IL
Tina Nerad
Wed, 31 Oct 2007 10:52:40 -0500
IPC Materials Declaration Workshop Series: 11/8-9/07 Boston, MA & 11/27-28/07 San Jose, CA
Tina Nerad
Wed, 10 Oct 2007 16:04:31 -0500
IPC RoHS: Impact of Rework and Repair Webcast, November 14, 2007 10:00 am - 11:00 am (CDT)
Tina Nerad
Thu, 4 Oct 2007 12:03:36 -0500
IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007 - San Jose, C
Tina Nerad
Mon, 29 Oct 2007 15:52:19 -0500
IPC Webcast Series: Via Hole Filling Technology and Processes, November 1 & 8, 2007
Tina Nerad
Thu, 25 Oct 2007 16:04:47 -0500
IPC Webcast: China RoHS: An Updated Roadmap to Achieving Compliance and Assessing Risks, October 10, 2007 - 10:00 am - 11:00 am (US Central Time)
Tina Nerad
Tue, 2 Oct 2007 08:39:08 -0500
IPC Webcast: China RoHS: An Updated Roadmap to Achieving Compliance and Assessing Risks, October 10, 2007 - 10:00 am - 11:00 am (US Central Time)
Tina Nerad
Fri, 5 Oct 2007 09:31:05 -0500
IPC Webcast: RoHS: Impact of Rework and Repair Webcast, November 14, 2007 10:00 am - 11:00 am (CST)
Tina Nerad
Wed, 17 Oct 2007 14:54:20 -0500
IPC/JEDEC International Conference on Lead-Free Electronics, Austin, TX, December 4, 2007/Technical Conference and December 3 & 5, 2007/Educational Courses
Tina Nerad
Thu, 11 Oct 2007 12:41:39 -0500
New Sender Tom P. Hummel
RoHS wire solder
Tom P. Hummel
Mon, 8 Oct 2007 15:39:14 -0400
New Sender Tony Steinke
Re: Via plugging with LPI soldermask...
Tony Steinke
Wed, 3 Oct 2007 16:08:38 -0400
New Sender Upton, Shawn
Re: RoHS wire solder
Upton, Shawn
Wed, 10 Oct 2007 11:48:11 -0400
New Sender Victor G. Hernandez
Re: BGA Intermetallic failure
Victor G. Hernandez
Mon, 1 Oct 2007 08:51:35 -0500
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Victor G. Hernandez
Thu, 11 Oct 2007 08:45:11 -0500
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Victor G. Hernandez
Thu, 11 Oct 2007 10:13:35 -0500
Re: Dissolving SOIC casing
Victor G. Hernandez
Thu, 11 Oct 2007 13:09:52 -0500
Re: Dye and Pry Vacuum Equipment Source/Recommendations
Victor G. Hernandez
Thu, 25 Oct 2007 11:04:41 -0500
Standard Interpretation
Victor G. Hernandez
Fri, 19 Oct 2007 10:20:29 -0500
New Sender Wee Mei
Re: Samtec SMT Connector Woe's...(again)
Wee Mei
Wed, 31 Oct 2007 07:51:40 +0800
New Sender weiner, mickey
Re: Inner layer spacing for reliability
weiner, mickey
Tue, 16 Oct 2007 11:01:36 +0300
New Sender Wenger, George M.
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole pl...
Wenger, George M.
Sun, 14 Oct 2007 21:41:18 -0400
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Wenger, George M.
Sat, 13 Oct 2007 19:54:25 -0400
New Sender Werner Engelmaier /*
Re: Bare-Board Materials for Lead-Free Soldering
Werner Engelmaier /*
Mon, 29 Oct 2007 14:01:27 EDT
Re: board material comparison
Werner Engelmaier /*
Mon, 22 Oct 2007 10:53:01 EDT
Re: Delamination of lead free PCBs
Werner Engelmaier /*
Tue, 23 Oct 2007 13:16:29 EDT
Re: Flux
Werner Engelmaier /*
Wed, 31 Oct 2007 13:34:44 EDT
Silicon Solar Cells
Werner Engelmaier /*
Fri, 26 Oct 2007 11:42:36 EDT
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole pl...
Werner Engelmaier /*
Sun, 14 Oct 2007 23:41:31 EDT
Re: SV: [TN] URGENT HELP NEEDED:- non-destructive method for via hole plating thickness
Werner Engelmaier /*
Sat, 13 Oct 2007 19:29:32 EDT
Re: The Only PCB Book you will Ever Need
Werner Engelmaier /*
Wed, 31 Oct 2007 23:56:55 EDT
New Sender Werner Engelmaier
Re: BGA underfill quality standards
Werner Engelmaier
Sat, 6 Oct 2007 13:07:25 EDT
Re: RoHS solder and wetting plus thermal reliefs
Werner Engelmaier
Wed, 10 Oct 2007 16:44:16 EDT
Re: Thru vias and plating thickness in the barrel ...
Werner Engelmaier
Sat, 6 Oct 2007 09:10:08 EDT
Re: Via plugging with LPI soldermask...
Werner Engelmaier
Wed, 3 Oct 2007 12:23:57 -0400
Re: Via plugging with LPI soldermask...
Werner Engelmaier
Thu, 4 Oct 2007 16:26:10 EDT
Re: Via plugging with LPI soldermask...
Werner Engelmaier
Fri, 5 Oct 2007 02:40:09 -0400
Re: Via plugging with LPI soldermask...
Werner Engelmaier
Sat, 6 Oct 2007 13:26:25 EDT
New Sender West, Jim
Re: Trimming left over excess "mouse bites"
West, Jim
Wed, 24 Oct 2007 06:09:59 -0400
New Sender Whittaker, Dewey (EHCOE)
Re: Bare-Board Materials for Lead-Free Soldering
Whittaker, Dewey (EHCOE)
Mon, 29 Oct 2007 11:43:46 -0700
Re: BGA Intermetallic failure
Whittaker, Dewey (EHCOE)
Mon, 1 Oct 2007 09:59:24 -0700
Re: cleaning concerns
Whittaker, Dewey (EHCOE)
Mon, 29 Oct 2007 10:26:23 -0700
Re: cleaning concerns
Whittaker, Dewey (EHCOE)
Tue, 30 Oct 2007 06:41:59 -0700
Re: cleaning concerns
Whittaker, Dewey (EHCOE)
Tue, 30 Oct 2007 07:27:22 -0700
Re: cleaning concerns
Whittaker, Dewey (EHCOE)
Tue, 30 Oct 2007 07:38:42 -0700
Re: cleaning concerns
Whittaker, Dewey (EHCOE)
Wed, 31 Oct 2007 10:00:21 -0700
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Whittaker, Dewey (EHCOE)
Thu, 11 Oct 2007 07:51:57 -0700
Re: Cracks in the body of glass diodes (JANTX1N4148UR1)
Whittaker, Dewey (EHCOE)
Fri, 12 Oct 2007 07:28:29 -0700
Re: Delamination of lead free PCBs
Whittaker, Dewey (EHCOE)
Mon, 29 Oct 2007 10:26:08 -0700
Re: ESD wrist strap testers.
Whittaker, Dewey (EHCOE)
Wed, 31 Oct 2007 07:43:05 -0700
Re: Flux
Whittaker, Dewey (EHCOE)
Wed, 31 Oct 2007 10:48:41 -0700
Re: Inner layer spacing for reliability
Whittaker, Dewey (EHCOE)
Wed, 17 Oct 2007 14:26:47 -0700
Re: inner layer spacing for voltage
Whittaker, Dewey (EHCOE)
Mon, 15 Oct 2007 08:21:01 -0700
Re: Installing Press-fit Connectors AFTER Conformal Coating?
Whittaker, Dewey (EHCOE)
Wed, 10 Oct 2007 06:53:55 -0700
Re: Ionic Cleanliness
Whittaker, Dewey (EHCOE)
Mon, 1 Oct 2007 13:51:03 -0700
Re: Lead-free HASL
Whittaker, Dewey (EHCOE)
Mon, 29 Oct 2007 10:26:22 -0700
Re: NTC test
Whittaker, Dewey (EHCOE)
Tue, 2 Oct 2007 07:25:37 -0700
Re: NTC: RE: cleaning concerns
Whittaker, Dewey (EHCOE)
Wed, 31 Oct 2007 06:46:08 -0700
Re: PWB-Hole Plating for Press-Fit Connectors
Whittaker, Dewey (EHCOE)
Wed, 17 Oct 2007 07:57:29 -0700
Re: Second sources - generic components
Whittaker, Dewey (EHCOE)
Fri, 19 Oct 2007 11:38:39 -0700
Re: SMT machine recommendation
Whittaker, Dewey (EHCOE)
Fri, 19 Oct 2007 08:37:20 -0700
Re: SV: [TN] I don't expect much answers on this....
Whittaker, Dewey (EHCOE)
Mon, 1 Oct 2007 13:02:25 -0700
New Sender Wilson, Bob
non-corrosive rtv
Wilson, Bob
Fri, 26 Oct 2007 12:19:07 -0700
Re: NTC - California fire-storm
Wilson, Bob
Wed, 24 Oct 2007 10:26:51 -0700
New Sender Wrobel, Clayton
Re: Lead-free HASL
Wrobel, Clayton
Tue, 30 Oct 2007 11:35:22 -0400
New Sender Yuan-chia Joyce Koo
Re: Dissolving SOIC casing
Yuan-chia Joyce Koo
Thu, 11 Oct 2007 13:45:23 -0400
Re: Is This a BAD Thing?
Yuan-chia Joyce Koo
Mon, 1 Oct 2007 14:21:10 -0400
Re: Is This a BAD Thing?
Yuan-chia Joyce Koo
Tue, 2 Oct 2007 14:24:29 -0400
Re: nano manipulator
Yuan-chia Joyce Koo
Fri, 26 Oct 2007 08:18:36 -0400
Re: Shielding for BGA rework
Yuan-chia Joyce Koo
Thu, 11 Oct 2007 16:10:59 -0400
New Sender Zilber Gil
Need a recommendation for masking tape for conformal coating
Zilber Gil
Thu, 18 Oct 2007 11:22:02 +0200
No clean Flux for Class 3 products compatible with Conformal Coating
Zilber Gil
Tue, 23 Oct 2007 18:44:43 +0200
Polyurethane lacquer removing
Zilber Gil
Tue, 30 Oct 2007 09:41:23 +0200

ATOM RSS1 RSS2