LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Sauer, Steven T.

Tue, 16 Dec 2003 13:27:40 -0500

Happy Holden

Tue, 16 Dec 2003 11:55:06 -0500

Mike McMonagle

Tue, 16 Dec 2003 09:33:15 -0600

Ellsworth Berkowitz

Tue, 16 Dec 2003 08:45:58 -0600

Happy Holden

Mon, 15 Dec 2003 16:07:30 -0500

Ted Kong

Mon, 15 Dec 2003 10:56:43 -0800

Ted Kong

Mon, 15 Dec 2003 10:44:37 -0800

Happy Holden

Mon, 15 Dec 2003 12:54:41 -0500

Chris Robertson

Mon, 15 Dec 2003 10:33:45 -0600

Happy Holden

Mon, 15 Dec 2003 11:23:50 -0500

.5 mm pitch components (OOPS)

d. terstegge

Mon, 15 Dec 2003 16:34:50 +0100

.5 mm pitch components

Ted Kong

Sat, 13 Dec 2003 17:59:15 -0800

Re: .5 mm pitch components (OOPS)

Daan Terstegge

Mon, 15 Dec 2003 19:39:01 +0100

4X magnification

Re: 4X magnification

Rick Thompson

Mon, 1 Dec 2003 07:34:28 -0800

Suzanne Foulkes

Tue, 30 Dec 2003 15:20:17 -0500

Adhesive strength vs overhang

Re: Adhesive strength vs overhang

Mike Fenner

Wed, 10 Dec 2003 09:06:25 -0000

Re: Adhesive strength vs overhang

Misner, Bruce

Tue, 9 Dec 2003 16:44:27 -0600

Re: Adhesive strength vs overhang

Mel Parrish

Tue, 9 Dec 2003 16:12:51 -0600

Adhesive strength vs overhang

Doug Pauls

Tue, 9 Dec 2003 14:14:08 -0600

Adhesive strength vs. overhang

Brian Ellis

Wed, 10 Dec 2003 09:54:43 +0200

Bev Christian

Tue, 9 Dec 2003 17:52:05 -0500

Doug Pauls

Tue, 9 Dec 2003 15:09:01 -0600

Bev Christian

Tue, 9 Dec 2003 15:23:20 -0500

Annular ring

Mcmaster, Michael

Wed, 31 Dec 2003 11:48:44 -0800

Annular ring

Yehuda Weisz - Netvision

Wed, 31 Dec 2003 17:14:15 +0200

Wolfgang E. Erat

Tue, 30 Dec 2003 14:34:44 -0000

Edward Szpruch

Tue, 30 Dec 2003 16:31:54 +0200

27782

Tue, 30 Dec 2003 09:24:32 -0500

Antw: Re: [TN] solder structure

Chris Robertson

Tue, 30 Dec 2003 08:16:53 -0600

Annular ring

Bruce D Stilmack

Tue, 30 Dec 2003 09:06:13 -0500

Re: Antw: Re: [TN] solder structure

Victor Hernandez

Wed, 17 Dec 2003 06:33:10 -0600

Antw: Re: [TN] solder structure

Guenter Grossmann

Wed, 17 Dec 2003 09:51:01 +0100

Batteries

Re: Batteries

Mon, 8 Dec 2003 12:23:13 EST

Batteries

David Tremmel

Mon, 8 Dec 2003 10:49:30 -0600

Better thermally conductive Epoxy...

Karl

Fri, 19 Dec 2003 16:55:34 -0600

Roland Jaquet

Tue, 9 Dec 2003 15:35:04 +0100

Creswick, Steven

Mon, 8 Dec 2003 07:45:12 -0500

Better thermally conductive Epoxy...

Dieselberg, Ron

Mon, 8 Dec 2003 07:18:22 -0500

Ken Patel

Thu, 4 Dec 2003 15:31:37 -0800

BGA solder volume question

Greg Parke

Tue, 2 Dec 2003 17:49:38 -0500

BGA Underfill comments/recommendations

Karl

Fri, 19 Dec 2003 17:05:54 -0600

Macko, Joe @ IEC

Fri, 19 Dec 2003 12:04:26 -0800

Steve Gregory

Fri, 19 Dec 2003 14:49:34 EST

BGA Underfill comments/recommendations

Vladimir Igoshev

Fri, 19 Dec 2003 10:23:08 -0500

Seppo Saario

Fri, 19 Dec 2003 11:49:26 +1000

BIG Boards...

Fri, 12 Dec 2003 14:14:08 EST

Denis Caissie

Wed, 10 Dec 2003 15:18:47 -0500

Randy Bock Sr.

Wed, 10 Dec 2003 15:25:57 -0500

Denis Caissie

Wed, 10 Dec 2003 15:14:25 -0500

Larry Koens

Wed, 10 Dec 2003 14:09:37 -0600

Dwight Mattix

Wed, 10 Dec 2003 12:02:05 -0800

BIG Boards...

Steve Gregory

Wed, 10 Dec 2003 14:16:44 EST

Blue leads

Stolar, Paul W

Wed, 17 Dec 2003 13:21:15 -0600

Bev Christian

Wed, 17 Dec 2003 12:33:18 -0500

Dave Hillman

Tue, 16 Dec 2003 11:58:19 -0600

Vladimir Igoshev

Tue, 16 Dec 2003 12:00:20 -0500

Dave Hillman

Mon, 15 Dec 2003 16:36:41 -0600

Cheryl Tulkoff/AUS/NIC is out of the office.

Steve Gregory

Mon, 15 Dec 2003 16:23:40 EST

Blue leads

Stolar, Paul W

Mon, 15 Dec 2003 13:45:01 -0600

Cheryl Tulkoff

Wed, 24 Dec 2003 01:01:01 -0600

Chips in Large MLCC's

Re: Chips in Large MLCC's

John Maxwell

Thu, 4 Dec 2003 09:27:39 -0800

Re: Chips in Large MLCC's

Bloomquist, Ken

Thu, 4 Dec 2003 06:10:28 -0800

Re: Chips in Large MLCC's

Ingemar Hernefjord (KC/EMW)

Thu, 4 Dec 2003 07:51:23 +0100

Chips in Large MLCC's

Bloomquist, Ken

Wed, 3 Dec 2003 14:39:15 -0800

Cleaning of Wire Bondable Gold

Vladimir Igoshev

Mon, 15 Dec 2003 12:49:34 -0500

David Hoover

Mon, 15 Dec 2003 09:03:25 -0800

Vladimir Igoshev

Fri, 12 Dec 2003 13:44:29 -0500

Steve Kelly

Fri, 12 Dec 2003 13:32:12 -0500

Leo Higgins

Fri, 12 Dec 2003 10:10:54 -0800

Vladimir Igoshev

Fri, 12 Dec 2003 12:51:06 -0500

Creswick, Steven

Fri, 12 Dec 2003 12:38:30 -0500

Dave Hillman

Fri, 12 Dec 2003 11:29:31 -0600

Vladimir Igoshev

Fri, 12 Dec 2003 12:18:04 -0500

Steve Kelly

Fri, 12 Dec 2003 11:24:16 -0500

Joe Fjelstad

Fri, 12 Dec 2003 11:06:42 EST

Peter Swanson

Fri, 12 Dec 2003 14:31:08 -0000

Eric Dawson

Fri, 12 Dec 2003 14:13:56 -0000

Mike Fenner

Fri, 12 Dec 2003 13:42:18 -0000

Brian Ellis

Fri, 12 Dec 2003 15:47:13 +0200

Rudy Sedlak

Fri, 12 Dec 2003 08:45:36 EST

Steve Kelly

Fri, 12 Dec 2003 08:30:53 -0500

Rudy Sedlak

Fri, 12 Dec 2003 07:41:30 EST

Creswick, Steven

Fri, 12 Dec 2003 06:09:03 -0500

Brian Ellis

Fri, 12 Dec 2003 12:25:52 +0200

Cleaning of Wire Bondable Gold

Rudy Sedlak

Thu, 11 Dec 2003 18:23:53 EST

Steve Kelly

Thu, 11 Dec 2003 17:48:40 -0500

Components Suppliers who are using Tin Finishes

Re: Components Suppliers who are using Tin Finishes

David Douthit

Wed, 10 Dec 2003 12:24:56 -0700

Re: Components Suppliers who are using Tin Finishes

Mike Fenner

Wed, 10 Dec 2003 17:53:22 -0000

Re: Components Suppliers who are using Tin Finishes

Bev Christian

Wed, 10 Dec 2003 12:49:51 -0500

Re: Components Suppliers who are using Tin Finishes

Mike Fenner

Wed, 10 Dec 2003 17:43:03 -0000

Re: Components Suppliers who are using Tin Finishes

Bloomquist, Ken

Wed, 10 Dec 2003 09:38:42 -0800

Re: Components Suppliers who are using Tin Finishes

Vladimir Igoshev

Wed, 10 Dec 2003 12:12:50 -0500

Re: Components Suppliers who are using Tin Finishes

Steve Gregory

Wed, 10 Dec 2003 12:15:16 EST

Re: Components Suppliers who are using Tin Finishes

Debbie Goodwin

Wed, 10 Dec 2003 08:59:11 -0800

Re: Components Suppliers who are using Tin Finishes

Bloomquist, Ken

Wed, 10 Dec 2003 09:03:20 -0800

Re: Components Suppliers who are using Tin Finishes

Mike Fenner

Wed, 10 Dec 2003 16:53:05 -0000

Components Suppliers who are using Tin Finishes

Steve Gregory

Wed, 10 Dec 2003 11:44:28 EST

Conformal coating - PARYLENE DIMER DPX-C

Graham Naisbitt

Tue, 16 Dec 2003 17:49:34 +0000

Brian Ellis

Tue, 16 Dec 2003 15:26:15 +0200

Reuven ROKAH

Tue, 16 Dec 2003 07:34:58 +0200

Reuven ROKAH

Tue, 16 Dec 2003 07:28:48 +0200

Brian Ellis

Mon, 15 Dec 2003 18:40:53 +0200

Misner, Bruce

Mon, 15 Dec 2003 07:48:36 -0700

Conformal coating - PARYLENE DIMER DPX-C

Dehoyos, Ramon

Mon, 15 Dec 2003 05:35:19 -0800

Reuven ROKAH

Sun, 14 Dec 2003 09:53:32 +0200

Continuity requirement (resistance value) for class 3 pr oduct

Re: Continuity requirement (resistance value) for class 3 pr oduct

Paul Holloway

Tue, 2 Dec 2003 13:20:44 -0600

Continuity requirement (resistance value) for class 3 product

Re: Continuity requirement (resistance value) for class 3 product

Crepeau, Phil

Tue, 2 Dec 2003 11:35:57 -0800

Re: Continuity requirement (resistance value) for class 3 product

Crepeau, Phil

Tue, 2 Dec 2003 10:34:51 -0800

Continuity requirement (resistance value) for class 3 product

Ken Patel

Tue, 2 Dec 2003 08:57:00 -0800

CTI rating

sam mccorkel

Mon, 15 Dec 2003 08:52:41 -0500

CTI rating

sam mccorkel

Tue, 9 Dec 2003 09:52:46 -0500

Depanelizer for routed panel

Re: Depanelizer for routed panel

Lee Whiteman

Wed, 10 Dec 2003 10:25:54 -0500

Re: Depanelizer for routed panel

Collins Graham

Wed, 10 Dec 2003 10:10:47 -0500

Depanelizer for routed panel

Tempea, Ioan

Wed, 10 Dec 2003 09:58:12 -0500

Double sided flex boards

H. Molema

Tue, 9 Dec 2003 10:11:57 +0100

Epoxy Potting - Leaks

Re: Epoxy Potting - Leaks

Barmuta, Mike

Wed, 31 Dec 2003 08:53:29 -0800

Epoxy Potting - Leaks

Tom Parkinson

Wed, 31 Dec 2003 10:23:44 -0500

Flex circuit information needed

Re: Flex circuit information needed

Steve Kelly

Fri, 19 Dec 2003 11:30:24 -0500

Re: Flex circuit information needed

Brummer Chuck

Fri, 19 Dec 2003 08:08:54 -0800

Flex circuit information needed

Bissonnette, Jean-Francois

Fri, 19 Dec 2003 10:58:37 -0500

Foreign material on top of the conformal coating

Re: Foreign material on top of the conformal coating

Graham Naisbitt

Fri, 12 Dec 2003 16:02:13 +0000

Re: Foreign material on top of the conformal coating

Dale Ritzen

Fri, 12 Dec 2003 08:52:20 -0600

Foreign material on top of the conformal coating

Bruce D Stilmack

Fri, 12 Dec 2003 08:56:16 -0500

GOOD RF GROUND

David Douthit

Wed, 10 Dec 2003 11:15:42 -0700

Phil Nutting

Wed, 10 Dec 2003 08:37:39 -0500

Marsico, James

Wed, 10 Dec 2003 07:27:55 -0500

Crepeau, Phil

Tue, 9 Dec 2003 13:46:45 -0800

Dehoyos, Ramon

Tue, 9 Dec 2003 12:14:39 -0800

high-temperature alloy and process for a multi-chip module

Croslin, Robert

Tue, 9 Dec 2003 11:06:45 -0500

GOOD RF GROUND

Marsico, James

Tue, 9 Dec 2003 10:56:14 -0500

Happy Christmas

Re: Happy Christmas

Jim Kittel

Tue, 23 Dec 2003 14:22:10 -0700

Re: Happy Christmas

Kasprzak, Bill (sys) USX

Tue, 23 Dec 2003 11:07:36 -0500

Re: Happy Christmas

Ahne Oosterhof

Tue, 23 Dec 2003 07:13:20 -0800

Happy Christmas

Graham Naisbitt

Tue, 23 Dec 2003 12:01:12 +0000

Re: high-temperature alloy and process for a multi-chip module

Mike Fenner

Wed, 17 Dec 2003 14:38:48 -0000

Re: high-temperature alloy and process for a multi-chip module

Mike McMonagle

Tue, 16 Dec 2003 11:13:05 -0600

high-temperature alloy and process for a multi-chip module

Sergey Ermolin

Tue, 16 Dec 2003 08:04:19 -0800

Hole tolerance

Chris Robertson

Tue, 16 Dec 2003 07:55:43 -0600

Tom Burek

Mon, 15 Dec 2003 15:41:54 -0700

Franklin D Asbell

Mon, 15 Dec 2003 16:48:35 -0600

Roger Stoops

Mon, 15 Dec 2003 16:29:43 -0500

Chris Robertson

Mon, 15 Dec 2003 15:00:40 -0600

Hole tolerance

Tom Burek

Mon, 15 Dec 2003 15:36:26 -0500

IPC Board Quality

Guy Ramsey

Tue, 30 Dec 2003 15:53:32 -0500

Kathy Kuhlow

Tue, 30 Dec 2003 13:51:28 -0600

Mcmaster, Michael

Tue, 30 Dec 2003 11:13:48 -0800

Guy Ramsey

Tue, 30 Dec 2003 14:13:22 -0500

Franklin D Asbell

Tue, 30 Dec 2003 12:51:00 -0600

27782

Tue, 30 Dec 2003 11:35:07 -0500

Dale Ritzen

Tue, 30 Dec 2003 10:20:39 -0600

David Douthit

Tue, 30 Dec 2003 08:48:23 -0700

IPC Board Quality - PLATING VOIDS

Kathy Kuhlow

Tue, 30 Dec 2003 08:58:33 -0600

IPC Board Quality

Dobbs, Marie

Tue, 30 Dec 2003 09:51:24 -0500

Re: IPC Board Quality - PLATING VOIDS

Tue, 30 Dec 2003 14:26:25 EST

IPC SPEC for opening ESD protective coverings

Karen Walters

Thu, 18 Dec 2003 09:36:11 -0500

IR Ovens

Tue, 9 Dec 2003 09:02:49 EST

Dehoyos, Ramon

Tue, 9 Dec 2003 05:47:21 -0800

Brian Ellis

Tue, 9 Dec 2003 12:29:59 +0200

Mon, 8 Dec 2003 18:56:14 EST

Dehoyos, Ramon

Mon, 8 Dec 2003 13:35:23 -0800

Mon, 8 Dec 2003 12:30:43 EST

Dehoyos, Ramon

Mon, 8 Dec 2003 06:48:59 -0800

Randy Bock Sr.

Mon, 8 Dec 2003 09:31:45 -0500

Doug Pauls

Mon, 8 Dec 2003 08:11:05 -0600

Dehoyos, Ramon

Mon, 8 Dec 2003 05:52:28 -0800

J-STD-033A, moisture level 1 ?

Brian Ellis

Sat, 6 Dec 2003 10:01:03 +0200

IR Ovens

Doug Pauls

Fri, 5 Dec 2003 15:42:32 -0600

Re: J-STD-033A, moisture level 1 ?

David Douthit

Thu, 11 Dec 2003 17:16:34 -0700

Re: J-STD-033A, moisture level 1 ?

Cagle, James

Thu, 11 Dec 2003 16:51:49 -0500

J-STD-033A, moisture level 1 ?

Macko, Joe @ IEC

Thu, 11 Dec 2003 13:49:47 -0800

LASER CUTTING SERVICE

Marsico, James

Wed, 10 Dec 2003 13:02:45 -0500

Sean Hill

Wed, 10 Dec 2003 09:25:10 -0800

Creswick, Steven

Wed, 10 Dec 2003 10:52:09 -0500

Long term Solderability Preservation Methods

Charlie McMahon

Wed, 10 Dec 2003 10:35:35 -0500

Lead Free

Yannick Brisson

Tue, 2 Dec 2003 15:46:16 -0500

Peter Barton

Thu, 18 Dec 2003 15:32:00 +0000

FOX, Ian (York Rd)

Thu, 18 Dec 2003 15:25:12 -0000

Mike Fenner

Thu, 18 Dec 2003 15:12:02 -0000

Karen Walters

Thu, 18 Dec 2003 09:57:40 -0500

Crain, Bob

Wed, 17 Dec 2003 11:24:09 -0500

russell(??)

Tue, 16 Dec 2003 16:33:08 +0800

Braddock, Iain

Tue, 16 Dec 2003 08:12:26 +0000

Dave Hillman

Fri, 12 Dec 2003 11:37:47 -0600

Mike McMonagle

Fri, 12 Dec 2003 08:50:14 -0600

Long term Solderability Preservation Methods

russell(??)

Fri, 12 Dec 2003 10:21:34 +0800

Phil Bavaro

Thu, 11 Dec 2003 18:11:49 -0800

looking for a PWB Assembly house

Re: looking for a PWB Assembly house

Kelly Stern

Fri, 5 Dec 2003 15:08:53 -0800

Re: looking for a PWB Assembly house

Jack Crawford

Wed, 3 Dec 2003 16:24:39 -0600

looking for a PWB Assembly house

Prasad Godavarti

Wed, 3 Dec 2003 13:22:22 -0600

looking for a PWB Assembly house

Prasad Godavarti

Wed, 3 Dec 2003 13:21:58 -0600

Low Volume High Mix

Reid, Lorraine

Tue, 2 Dec 2003 08:18:05 -0000

Sasha Miladinovic

Tue, 2 Dec 2003 07:38:55 +0100

Sauer, Steven T.

Mon, 1 Dec 2003 13:42:57 -0500

Richard Brennan

Mon, 1 Dec 2003 17:19:22 -0000

Chris Almeras

Mon, 1 Dec 2003 11:57:45 -0500

Moisture Sensitive Tantalum Caps

Morse, Carrie

Mon, 1 Dec 2003 11:53:05 -0500

Low Volume High Mix

Reid, Lorraine

Mon, 1 Dec 2003 16:37:27 -0000

mea culpa

Crepeau, Phil

Thu, 18 Dec 2003 08:44:48 -0800

Re: Moisture Sensitive Tantalum Caps

David Douthit

Wed, 17 Dec 2003 11:23:09 -0700

Moisture Sensitive Tantalum Caps

d. terstegge

Wed, 17 Dec 2003 17:42:36 +0100

Mouse-bite / rat-bite holes design...for separation along the lin e

Ken Patel

Tue, 30 Dec 2003 11:20:07 -0800

Need a chemist or chemical engineer to answer

Bev Christian

Wed, 17 Dec 2003 16:32:16 -0500

George H Franck

Wed, 17 Dec 2003 16:30:56 -0500

Crepeau, Phil

Wed, 17 Dec 2003 13:17:58 -0800

George H Franck

Wed, 17 Dec 2003 16:22:19 -0500

Leo Roos

Wed, 17 Dec 2003 12:45:38 -0800

Bev Christian

Wed, 17 Dec 2003 15:13:57 -0500

Bev Christian

Wed, 17 Dec 2003 15:08:42 -0500

Gaugler, Kevin

Wed, 17 Dec 2003 15:00:40 -0500

Bev Christian

Wed, 17 Dec 2003 14:52:48 -0500

Crepeau, Phil

Wed, 17 Dec 2003 11:52:15 -0800

Need a chemist or chemical engineer to answer

Brooks,Bill

Wed, 17 Dec 2003 11:34:40 -0800

Bev Christian

Wed, 17 Dec 2003 13:56:36 -0500

need off shore PCB quote

Re: need off shore PCB quote

Charles Caswell

Tue, 9 Dec 2003 14:04:35 -0600

need off shore PCB quote

Bill Sullivan

Tue, 9 Dec 2003 11:57:15 -0700

Need your opinion

Reuven ROKAH

Sun, 21 Dec 2003 10:10:38 +0200

Victor Hernandez

Fri, 19 Dec 2003 05:21:47 -0600

Thu, 18 Dec 2003 19:20:17 EST

Joe Fjelstad

Thu, 18 Dec 2003 17:27:33 EST

Kathy Kuhlow

Thu, 18 Dec 2003 16:11:36 -0600

Steve Gregory

Thu, 18 Dec 2003 17:05:10 EST

NTC-Sorry for that... Searching a friend.

Franklin D Asbell

Thu, 18 Dec 2003 16:18:00 -0600

Need your opinion

Kathy Kuhlow

Thu, 18 Dec 2003 15:48:47 -0600

NTC - Holiday wishes...

Steve Gregory

Tue, 23 Dec 2003 20:19:59 EST

Re: NTC-Sorry for that... Searching a friend.

Bissonnette, Jean-Francois

Fri, 19 Dec 2003 09:59:59 -0500

NTC-Sorry for that... Searching a friend.

Bissonnette, Jean-Francois

Thu, 18 Dec 2003 17:19:20 -0500

Ok OK

Randy Bock Sr.

Thu, 4 Dec 2003 10:36:17 -0500

Old Array Devices

Re: Old Array Devices

David Tremmel

Tue, 9 Dec 2003 10:58:08 -0600

Re: Old Array Devices

Mel Parrish

Tue, 9 Dec 2003 08:46:38 -0600

Re: Old Array Devices

Dave Hillman

Mon, 8 Dec 2003 14:18:14 -0600

Old Array Devices

Bev Christian

Mon, 8 Dec 2003 11:44:49 -0500

Oxidation layer measurement

Reuven ROKAH

Tue, 30 Dec 2003 17:12:38 +0200

Parylene Piercing Press-fit Connectors...

Crepeau, Phil

Thu, 11 Dec 2003 09:33:00 -0800

Crepeau, Phil

Thu, 11 Dec 2003 09:29:07 -0800

Thu, 11 Dec 2003 12:23:27 EST

Barr, Bob

Thu, 11 Dec 2003 12:05:19 -0500

David Douthit

Thu, 11 Dec 2003 09:58:51 -0700

Crepeau, Phil

Thu, 11 Dec 2003 07:29:11 -0800

Crepeau, Phil

Thu, 11 Dec 2003 07:25:16 -0800

Parylene Piercing Press-fit Connectors...

Barr, Bob

Thu, 11 Dec 2003 09:55:58 -0500

Steve Gregory

Thu, 11 Dec 2003 09:25:16 EST

Paste Deposition

Jason W. Gregory

Wed, 31 Dec 2003 07:14:25 -0600

Jorge Santana

Tue, 30 Dec 2003 16:21:53 -0600

27782

Tue, 30 Dec 2003 13:55:51 -0500

Blair K. Hogg

Tue, 30 Dec 2003 13:54:28 -0500

Steve Gregory

Tue, 30 Dec 2003 13:43:44 EST

Tom Gervascio

Tue, 30 Dec 2003 13:25:48 -0500

Pin numbering convention on diodes

Dave Chapman

Tue, 30 Dec 2003 09:37:21 -0600

Paste Deposition

27782

Tue, 30 Dec 2003 10:28:02 -0500

Re: Pin numbering convention on diodes

Charles Caswell

Mon, 1 Dec 2003 15:34:49 -0600

Re: Pin numbering convention on diodes

Jeff Seeger

Mon, 1 Dec 2003 13:05:46 -0500

Pin numbering convention on diodes

Bruce D Stilmack

Mon, 1 Dec 2003 12:58:47 -0500

Plasma etching prior to assembly

Re: Plasma etching prior to assembly

Bev Christian

Mon, 22 Dec 2003 09:53:27 -0500

Re: Plasma etching prior to assembly

Brian Ellis

Mon, 22 Dec 2003 16:50:14 +0200

Plasma etching prior to assembly

d. terstegge

Mon, 22 Dec 2003 12:21:53 +0100

Pretinning height on fine-pitch gull wing leads

Re: Pretinning height on fine-pitch gull wing leads

FOX, Ian (York Rd)

Tue, 2 Dec 2003 07:35:21 -0000

Re: Pretinning height on fine-pitch gull wing leads

Charles Caswell

Mon, 1 Dec 2003 16:16:20 -0600

Problem With PCB Opens

Rob Goodwin

Tue, 16 Dec 2003 08:46:48 -0600

George H Franck

Mon, 15 Dec 2003 11:41:23 -0500

Wolfgang E. Erat

Mon, 15 Dec 2003 17:11:04 -0000

Hugues Colicis

Mon, 15 Dec 2003 16:41:12 +0100

Crepeau, Phil

Mon, 15 Dec 2003 07:44:50 -0800

Chris Robertson

Mon, 15 Dec 2003 09:11:59 -0600

Werner Engelmaier

Mon, 15 Dec 2003 10:03:52 EST

Franklin D Asbell

Mon, 15 Dec 2003 09:17:34 -0600

Problem With PCB Opens - Another case study

Mon, 15 Dec 2003 09:56:46 EST

Problem With PCB Opens

Eric Stellrecht

Mon, 15 Dec 2003 08:10:43 -0600

Re: Problem With PCB Opens - Another case study

Chris Robertson

Tue, 16 Dec 2003 07:59:34 -0600

Re: Problem With PCB Opens - Another case study

Matthew Park

Mon, 15 Dec 2003 18:44:58 -0600

Problem With PCB Opens - Another case study

Lum Wee Mei

Tue, 16 Dec 2003 08:04:42 +0800

Qualified Suppliers

MacConnell, Richard B (ES)

Wed, 31 Dec 2003 13:00:16 -0800

Question on 2-oz Copper uniformity for current sense res istor

Re: Question on 2-oz Copper uniformity for current sense res istor

Edward Szpruch

Thu, 25 Dec 2003 07:35:00 +0200

Question on 2-oz Copper uniformity for current sense resistor

Re: Question on 2-oz Copper uniformity for current sense resistor

David Hoover

Wed, 24 Dec 2003 08:50:36 -0800

Question on 2-oz Copper uniformity for current sense resistor

Carl VanWormer

Wed, 24 Dec 2003 07:16:15 -0800

Ramp Rate -Reflow Ovens

Re: Ramp Rate -Reflow Ovens

Werner Engelmaier

Thu, 18 Dec 2003 23:15:13 EST

Ramp Rate -Reflow Ovens

Phil Bavaro

Thu, 18 Dec 2003 17:36:52 -0800

reaction rates

Crepeau, Phil

Wed, 17 Dec 2003 16:56:16 -0800

Alexandra Curtis

Tue, 9 Dec 2003 13:48:25 -0600

Rejection criteria for voids in BGA solder joints

Re: Rejection criteria for voids in BGA solder joints

Barry Gallegos

Wed, 17 Dec 2003 06:53:39 -0700

Re: Rejection criteria for voids in BGA solder joints

d. terstegge

Wed, 17 Dec 2003 09:12:52 +0100

Re: Rejection criteria for voids in BGA solder joints

Macko, Joe @ IEC

Tue, 16 Dec 2003 09:41:25 -0800

Re: Rejection criteria for voids in BGA solder joints

Barry Gallegos

Tue, 16 Dec 2003 10:21:29 -0700

Rejection criteria for voids in BGA solder joints

Ken Patel

Tue, 16 Dec 2003 09:09:19 -0800

Repairing/Replacing underfilled BGA's

Re: Repairing/Replacing underfilled BGA's

Karl

Fri, 19 Dec 2003 17:53:28 -0600

Revised Question on 2-oz Copper uniformity for current sense res istor

Carl VanWormer

Tue, 30 Dec 2003 08:42:41 -0800

Rework/Repair Cost

Franklin D Asbell

Wed, 31 Dec 2003 10:55:52 -0600

Re: rework/repair cost

Charley Dennehy

Wed, 31 Dec 2003 11:23:31 -0500

Re: rework/repair cost

Guy Ramsey

Wed, 31 Dec 2003 09:08:39 -0500

sequential build up process

Joe Fjelstad

Sat, 20 Dec 2003 16:51:21 EST

Dehoyos, Ramon

Wed, 17 Dec 2003 10:17:39 -0800

Happy Holden

Wed, 17 Dec 2003 10:48:55 -0500

Leigh-Ann Litavis

Wed, 17 Dec 2003 10:45:16 EST

Dehoyos, Ramon

Wed, 17 Dec 2003 06:55:50 -0800

sequential build up process

Happy Holden

Wed, 17 Dec 2003 08:35:34 -0500

Murulidhara S

Wed, 17 Dec 2003 12:02:00 +0530

SnPb Solder pot composition

Reuven ROKAH

Sun, 7 Dec 2003 09:03:16 +0200

Yordan Venev

Fri, 5 Dec 2003 16:14:07 +0200

Blair K. Hogg

Fri, 5 Dec 2003 09:11:43 -0500

Dehoyos, Ramon

Fri, 5 Dec 2003 06:07:16 -0800

Ed Popielarski

Thu, 4 Dec 2003 17:50:35 -0800

Louis Hart

Thu, 4 Dec 2003 18:08:57 -0500

Gary Camac

Thu, 4 Dec 2003 16:13:44 -0600

Carlr Ray

Thu, 4 Dec 2003 13:49:22 -0600

Sasha Miladinovic

Thu, 4 Dec 2003 20:42:05 +0100

Sasha Miladinovic

Thu, 4 Dec 2003 20:38:36 +0100

Doug Pauls

Thu, 4 Dec 2003 13:28:02 -0600

Ed Popielarski

Thu, 4 Dec 2003 11:12:15 -0800

Dave Hillman

Thu, 4 Dec 2003 13:12:08 -0600

Sasha Miladinovic

Thu, 4 Dec 2003 20:06:55 +0100

Steve Gregory

Thu, 4 Dec 2003 13:37:15 EST

Sasha Miladinovic

Thu, 4 Dec 2003 19:17:15 +0100

SnPb Solder pot composition - No Technical Content

Ed Popielarski

Thu, 4 Dec 2003 09:40:45 -0800

Re: SnPb Solder pot composition - No Technical Content

Dave Hillman

Thu, 4 Dec 2003 13:40:12 -0600

SnPb Solder pot composition.

Dehoyos, Ramon

Thu, 4 Dec 2003 05:44:56 -0800

Yordan Venev

Thu, 4 Dec 2003 09:58:13 +0200

Sasha Miladinovic

Wed, 3 Dec 2003 18:03:20 +0100

Dehoyos, Ramon

Wed, 3 Dec 2003 08:07:16 -0800

Hans Shin

Wed, 3 Dec 2003 08:00:36 -0800

Dieselberg, Ron

Wed, 3 Dec 2003 10:21:12 -0500

Dale Ritzen

Wed, 3 Dec 2003 09:02:52 -0600

Edward Szpruch

Wed, 3 Dec 2003 16:46:59 +0200

SnPb Solder pot composition.

Louis Hart

Wed, 3 Dec 2003 09:24:46 -0500

Yordan Venev

Wed, 3 Dec 2003 14:58:21 +0200

Solder mask for repair

Charles Caswell

Fri, 19 Dec 2003 10:44:01 -0600

Jack Crawford

Fri, 19 Dec 2003 10:36:02 -0600

Doug Pauls

Fri, 19 Dec 2003 10:29:01 -0600

Charles Caswell

Fri, 19 Dec 2003 07:13:59 -0600

H. Molema

Fri, 19 Dec 2003 09:00:18 +0100

solder volume vs paste height

Mike McMonagle

Thu, 18 Dec 2003 10:36:05 -0600

Solder mask for repair

d. terstegge

Thu, 18 Dec 2003 17:11:56 +0100

solder structure

Re: solder structure

David Fish

Wed, 17 Dec 2003 22:59:16 -0500

Re: solder structure

Dave Hillman

Tue, 16 Dec 2003 17:31:06 -0600

Re: solder structure

Victor Hernandez

Tue, 16 Dec 2003 15:11:21 -0600

solder structure

Tue, 16 Dec 2003 16:02:17 EST

Re: solder volume vs paste height

Sasha Miladinovic

Fri, 12 Dec 2003 10:07:20 +0100

solder volume vs paste height

pras chop

Fri, 12 Dec 2003 03:41:37 +0000

Soldering Robots

Re: Soldering Robots

Lakshmi Dwivedula

Mon, 8 Dec 2003 14:10:23 -0500

SPC controls

Peter Swanson

Fri, 12 Dec 2003 14:17:42 -0000

Dehoyos, Ramon

Fri, 12 Dec 2003 06:39:34 -0800

Blair K. Hogg

Fri, 12 Dec 2003 09:28:07 -0500

Tempea, Ioan

Fri, 12 Dec 2003 09:05:42 -0500

Blair K. Hogg

Fri, 12 Dec 2003 08:47:30 -0500

Speaking of Underfilling...

Dehoyos, Ramon

Fri, 12 Dec 2003 04:36:26 -0800

SPC controls

pras chop

Fri, 12 Dec 2003 03:45:11 +0000

Re: Speaking of Underfilling...

Karl

Fri, 19 Dec 2003 22:10:57 -0600

Star, Ring, and Mesh Backplanes

Re: Star, Ring, and Mesh Backplanes

Sergey Ermolin

Wed, 17 Dec 2003 10:08:34 -0800

Star, Ring, and Mesh Backplanes

Dennis Fritz

Wed, 17 Dec 2003 12:43:05 EST

Taptite and washers

Torben Søndergaard Taustrup

Fri, 5 Dec 2003 08:17:44 +0100

Crepeau, Phil

Thu, 4 Dec 2003 17:24:42 -0800

Lakshmi Dwivedula

Thu, 4 Dec 2003 20:16:09 -0500

Crepeau, Phil

Thu, 4 Dec 2003 17:03:28 -0800

Taptite and washers

Torben S. Taustrup

Wed, 3 Dec 2003 10:28:00 +0100

Tarnished Surface

Brian Ellis

Thu, 18 Dec 2003 11:43:34 +0200

Rudy Sedlak

Wed, 17 Dec 2003 19:00:24 EST

Barmuta, Mike

Wed, 17 Dec 2003 15:41:13 -0800

Dave Hillman

Wed, 17 Dec 2003 16:32:48 -0600