Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wHajb-000BjFC; Wed, 16 Apr 97 14:51 CDT |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Wed, 16 Apr 1997 13:00:40 -0700 (PDT) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"ND8h61.0.ZMM.jsILp"@ipc> |
Subject: |
|
From: |
|
Mime-Version: |
1.0 |
From [log in to unmask] Wed Apr 16 15: |
44:42 1997 |
X-Loop: |
|
Message-Id: |
<v03007802af7a7dfeb415@[128.102.146.157]> |
Parts/Attachments: |
|
|
>
>To: VAN HOREN EDUARD VM81 014 57 20 08 <[log in to unmask]>
>From: Bill Marsh <[log in to unmask]>
>Subject: Re: VIAS IN 0805 PADS WAVESOLDERING
>Cc:
>Bcc:
>X-Attachments:
>
>Check IPC-SM-782, which has guidelines about via and pad design.
>
>>Hi,
>>Like everybody (?) we are using 0805 components in wavesoldering.
>>When there is a viahole in the pad, we see a number of very thin
>>solderjoints (almost undetectable visually) and even non-soldered
>>components.
>>Is there an experience in the field about allowing or not allowing this
>>configuration, and about via-hole size and via-position in the pad to
>>reduce or prevent defects ?
>>Eddie Van Horen [log in to unmask]
>>
>>
>>***************************************************************************
>>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>>***************************************************************************
>>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>>* with <subject: subscribe/unsubscribe> and no text in the body. *
>>***************************************************************************
>>* If you are having a problem with the IPC TechNet forum please contact *
>>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>>***************************************************************************
>
>
>
Bill Marsh
Phone: 415-604-6979
e-mail: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|