TECHNET Archives

March 2013

TechNet@IPC.ORG
Options: Hide Table of Contents

48-pin QFN via-in-pad solder slug problem. (2 Messages)
<No subject> (1 Message)
Antwort: Re: [TN] Conformal Coating and J1 / 610 (1 Message)
BARE PCB disposing (6 Messages)
BGA Rework reflow Profile (1 Message)
Buried/blind/stacked via layups (1 Message)
Call for Papers: SMART Group European Conference & Exhibition 2-3 October 2013, Oxfordshire, England (1 Message)
Call For Participation - Reflow Oven Characterization Standard (2 Messages)
Cleanliness (10 Messages)
Coating stripping facility (7 Messages)
Conductive path failure in thermal cycling (20 Messages)
Conformal Coat and Board Edges (16 Messages)
Conformal Coat and Bubbles (23 Messages)
Conformal Coating and J1 / 610 (25 Messages)
Cooling of Solder Paste Overnight (9 Messages)
corrosion under Solder Mask (13 Messages)
Detecting Cut Wire Strands on Insulation Displacement Cables (15 Messages)
Diva's name (2 Messages)
Drop box (3 Messages)
Dropbox (28 Messages)
Dropbox need feedback (7 Messages)
Excellent Discssion on Vater Vapor (3 Messages)
Explaining why pretty solder joints arn't good solder joints (16 Messages)
EXTERNAL: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.) (1 Message)
EXTERNAL: [TN] Explaining why pretty solder joints arn't good solder joints (1 Message)
EXTERNAL: [TN] Requirements for Dry Cabinet (3 Messages)
Extra Lead Free solder in wave solder pot... (5 Messages)
Friday Quiz (1 Message)
guess an artist (1 Message)
how is "oxygen-free" defined and measured? (6 Messages)
Humidity Measurements: Relative or Absolute (22 Messages)
I thin this is the correct Diva's name (1 Message)
INACTIVE MIL-PRF DOCUMENTS (2 Messages)
IPC 6012 Class 3 Approval (1 Message)
IPC procedure for disconnecting one soldered lead of a SMT component (3 Messages)
IPC-6012 (19 Messages)
IPC-7095C vs IPC-4556 ENEPIG for SnPb (6 Messages)
Low Tin Levels in wave solder pot... (10 Messages)
Mixing Solders (4 Messages)
Non-Conductive Via Filling (2 Messages)
Non-HASL finishes and J-STD-003B durability conditioning (2 Messages)
Notes in PCB Fabrication (8 Messages)
NTC 37 seconds video (4 Messages)
NTC Friday Element Quiz Answer (26 Messages)
NTC Friday Element Quiz Question (60 Messages)
NTC Friday Element Quiz Question - Bayesian Filter detected spam (2 Messages)
ODB++ to gerber? (4 Messages)
Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.) (18 Messages)
R: [TN] BGA Rework reflow Profile (1 Message)
Requirements for Dry Cabinet (1 Message)
SAC 305 etch (8 Messages)
Solder Mask sensitivity to environment (2 Messages)
solder mask thickness (2 Messages)
Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine (32 Messages)
solder which does ot scavenge gold (22 Messages)
SOLDERMASK THICKNESS FOR SPRAY COATED MACHINE (1 Message)
Tape test (7 Messages)
Thin Film Measurement (2 Messages)
To characterize or not (6 Messages)
Wed Whisker call in (1 Message)
Which ESD Standard (11 Messages)
x-ray inspection of PTH barrel fill (14 Messages)

Subject Sorted by Subject, Chronologically

From

Date
New Thread 48-pin QFN via-in-pad solder slug problem.
Re: 48-pin QFN via-in-pad solder slug problem.
Victor Hernandez
Fri, 22 Mar 2013 06:12:39 -0500
Re: 48-pin QFN via-in-pad solder slug problem.
Smith, Rick
Thu, 21 Mar 2013 20:29:15 +0000
New Thread <No subject>
<No subject>
Stadem, Richard D.
Wed, 27 Mar 2013 12:27:28 +0000
New Thread Antwort: Re: [TN] Conformal Coating and J1 / 610
Antwort: Re: [TN] Conformal Coating and J1 / 610
Frank Kriesch
Fri, 8 Mar 2013 14:39:38 +0100
New Thread BARE PCB disposing
Re: BARE PCB disposing
Afri Singh
Fri, 8 Mar 2013 19:37:24 -0500
Re: BARE PCB disposing
Goodyear, Patrick
Mon, 4 Mar 2013 05:32:36 +0000
Re: BARE PCB disposing
Victor Hernandez
Fri, 1 Mar 2013 08:09:34 -0600
Re: BARE PCB disposing
Karen Tellefsen
Fri, 1 Mar 2013 08:55:23 -0500
Re: BARE PCB disposing
Kuczynski, Michael
Fri, 1 Mar 2013 08:23:09 -0500
BARE PCB disposing
Ramakrishnan Saravanan
Fri, 1 Mar 2013 06:34:29 -0600
New Thread BGA Rework reflow Profile
BGA Rework reflow Profile
Çetin Yeğin
Wed, 6 Mar 2013 15:46:13 +0200
New Thread Buried/blind/stacked via layups
Re: Buried/blind/stacked via layups
Jason Zhao
Fri, 8 Mar 2013 09:28:15 -0600
New Thread Call for Papers: SMART Group European Conference & Exhibition 2-3 October 2013, Oxfordshire, England
Call for Papers: SMART Group European Conference & Exhibition 2-3 October 2013, Oxfordshire, England
Mike Fenner
Tue, 5 Mar 2013 11:10:45 +0000
New Thread Call For Participation - Reflow Oven Characterization Standard
Re: Call For Participation - Reflow Oven Characterization Standard
Leland Woodall
Thu, 28 Mar 2013 10:46:05 +0000
Call For Participation - Reflow Oven Characterization Standard
Kris Roberson
Wed, 27 Mar 2013 20:50:10 +0000
New Thread Cleanliness
Re: Cleanliness
Mike Fenner
Thu, 14 Mar 2013 23:20:01 +0000
Re: Cleanliness
Sue Powers-Hartman
Thu, 14 Mar 2013 14:14:52 -0500
Re: Cleanliness
Stadem, Richard D.
Thu, 14 Mar 2013 13:33:06 +0000
Re: Cleanliness
Victor Hernandez
Thu, 14 Mar 2013 08:20:21 -0500
Re: Cleanliness
Stadem, Richard D.
Thu, 14 Mar 2013 13:19:01 +0000
Re: Cleanliness
Douglas Pauls
Thu, 14 Mar 2013 07:15:56 -0500
Re: Cleanliness
Inge Hernefjord
Thu, 14 Mar 2013 04:52:07 -0700
Re: Cleanliness
Gregg Owens
Tue, 12 Mar 2013 16:32:18 +0000
Re: Cleanliness
Whittaker, Dewey (EHCOE)
Tue, 12 Mar 2013 16:29:28 +0000
Cleanliness
Sue Powers-Hartman
Tue, 12 Mar 2013 10:50:24 -0500
New Thread Coating stripping facility
Re: Coating stripping facility
Lloyd Duso
Wed, 6 Mar 2013 09:58:18 -0500
Re: Coating stripping facility
Whittaker, Dewey (EHCOE)
Wed, 6 Mar 2013 14:29:14 +0000
Re: Coating stripping facility
Douglas Pauls
Wed, 6 Mar 2013 08:04:47 -0600
Re: Coating stripping facility
James Mahoney
Wed, 6 Mar 2013 08:01:45 -0500
Re: Coating stripping facility
Goodyear, Patrick
Wed, 6 Mar 2013 12:58:54 +0000
Re: Coating stripping facility
Lloyd Duso
Wed, 6 Mar 2013 07:36:35 -0500
Coating stripping facility
Ioan Tempea
Tue, 5 Mar 2013 20:19:03 +0000
New Thread Conductive path failure in thermal cycling
Re: Conductive path failure in thermal cycling
Goodyear, Patrick
Tue, 5 Mar 2013 05:49:06 +0000
Re: Conductive path failure in thermal cycling
Vladimir Igoshev
Mon, 4 Mar 2013 15:28:57 +0000
Re: Conductive path failure in thermal cycling
Stadem, Richard D.
Mon, 4 Mar 2013 15:14:31 +0000
Re: Conductive path failure in thermal cycling
Vladimir Igoshev
Mon, 4 Mar 2013 15:07:21 +0000
Re: Conductive path failure in thermal cycling
David D. Hillman
Mon, 4 Mar 2013 08:59:04 -0600
Re: Conductive path failure in thermal cycling
Ioan Tempea
Mon, 4 Mar 2013 14:53:02 +0000
Re: Conductive path failure in thermal cycling
David D. Hillman
Mon, 4 Mar 2013 08:52:03 -0600
Re: Conductive path failure in thermal cycling
Whittaker, Dewey (EHCOE)
Mon, 4 Mar 2013 14:42:32 +0000
Re: Conductive path failure in thermal cycling
Victor Hernandez
Mon, 4 Mar 2013 08:37:55 -0600
Re: Conductive path failure in thermal cycling
Vladimir Igoshev
Mon, 4 Mar 2013 14:36:09 +0000
Re: Conductive path failure in thermal cycling
Vladimir Igoshev
Mon, 4 Mar 2013 14:35:45 +0000
Re: Conductive path failure in thermal cycling
Ioan Tempea
Mon, 4 Mar 2013 14:22:57 +0000
Re: Conductive path failure in thermal cycling
David D. Hillman
Mon, 4 Mar 2013 08:08:34 -0600
Re: Conductive path failure in thermal cycling
Wayne Thayer
Sun, 3 Mar 2013 19:59:28 +0000
Re: Conductive path failure in thermal cycling
Ioan Tempea
Sun, 3 Mar 2013 17:09:21 +0000
Re: Conductive path failure in thermal cycling
Vladimir Igoshev
Sat, 2 Mar 2013 02:25:42 +0000
Re: Conductive path failure in thermal cycling
Wayne Thayer
Sat, 2 Mar 2013 01:50:50 +0000
Re: Conductive path failure in thermal cycling
Ioan Tempea
Fri, 1 Mar 2013 21:05:42 +0000
Re: Conductive path failure in thermal cycling
David D. Hillman
Fri, 1 Mar 2013 13:29:32 -0600
Conductive path failure in thermal cycling
Ioan Tempea
Fri, 1 Mar 2013 16:34:01 +0000
New Thread Conformal Coat and Board Edges
Re: Conformal Coat and Board Edges
Brian Ellis
Wed, 27 Mar 2013 08:39:05 +0200
Re: Conformal Coat and Board Edges
Joyce Koo
Tue, 26 Mar 2013 18:40:50 +0000
Re: Conformal Coat and Board Edges
Wayne Thayer
Tue, 26 Mar 2013 18:39:26 +0000
Re: Conformal Coat and Board Edges
Douglas Pauls
Tue, 26 Mar 2013 13:37:42 -0500
Re: Conformal Coat and Board Edges
Douglas Pauls
Tue, 26 Mar 2013 13:36:05 -0500
Re: Conformal Coat and Board Edges
Douglas Pauls
Tue, 26 Mar 2013 13:32:44 -0500
Re: Conformal Coat and Board Edges
Phil Kinner
Tue, 26 Mar 2013 17:59:16 +0100
Re: Conformal Coat and Board Edges
Inge Hernefjord
Tue, 26 Mar 2013 17:55:14 +0100
Re: Conformal Coat and Board Edges
Stadem, Richard D.
Tue, 26 Mar 2013 16:56:01 +0000
Re: Conformal Coat and Board Edges
Graham Naisbitt
Tue, 26 Mar 2013 16:55:32 +0000
Re: Conformal Coat and Board Edges
lee Hitchens
Tue, 26 Mar 2013 16:39:45 +0000
Re: Conformal Coat and Board Edges
Fox, Ian
Tue, 26 Mar 2013 16:16:58 +0000
Re: Conformal Coat and Board Edges
Stadem, Richard D.
Tue, 26 Mar 2013 16:03:53 +0000
Re: Conformal Coat and Board Edges
Graham Collins
Tue, 26 Mar 2013 12:54:15 -0300
Re: Conformal Coat and Board Edges
lduso - Diamond-MT.com
Tue, 26 Mar 2013 11:51:03 -0400
Conformal Coat and Board Edges
Douglas Pauls
Tue, 26 Mar 2013 10:42:42 -0500
New Thread Conformal Coat and Bubbles
Re: Conformal Coat and Bubbles
Graham Naisbitt
Thu, 28 Mar 2013 14:17:36 +0000
Re: Conformal Coat and Bubbles
Stadem, Richard D.
Thu, 28 Mar 2013 12:51:55 +0000
Re: Conformal Coat and Bubbles
Brian Ellis
Thu, 28 Mar 2013 14:41:26 +0200
Re: Conformal Coat and Bubbles
Douglas Pauls
Tue, 26 Mar 2013 10:37:05 -0500
Re: Conformal Coat and Bubbles
Inge Hernefjord
Sat, 23 Mar 2013 13:38:26 +0100
Re: Conformal Coat and Bubbles
Brian Ellis
Sat, 23 Mar 2013 09:20:48 +0200
Re: Conformal Coat and Bubbles
Stadem, Richard D.
Fri, 22 Mar 2013 14:17:42 +0000
Re: Conformal Coat and Bubbles
Whittaker, Dewey (EHCOE)
Fri, 22 Mar 2013 14:06:06 +0000
Re: Conformal Coat and Bubbles
Douglas Pauls
Fri, 22 Mar 2013 08:54:47 -0500
Re: Conformal Coat and Bubbles
Stadem, Richard D.
Fri, 22 Mar 2013 13:40:36 +0000
Re: Conformal Coat and Bubbles
Douglas Pauls
Fri, 22 Mar 2013 08:19:04 -0500
Re: Conformal Coat and Bubbles
Douglas Pauls
Fri, 22 Mar 2013 08:00:42 -0500
Re: Conformal Coat and Bubbles
Richard Kraszewski
Fri, 22 Mar 2013 03:47:36 +0000
Re: Conformal Coat and Bubbles
Inge Hernefjord
Fri, 22 Mar 2013 01:03:22 +0100
Re: Conformal Coat and Bubbles
Douglas Pauls
Thu, 21 Mar 2013 13:29:01 -0500
Re: Conformal Coat and Bubbles
Phil Bavaro
Thu, 21 Mar 2013 17:01:43 +0000
Re: Conformal Coat and Bubbles
Douglas Pauls
Thu, 21 Mar 2013 13:29:01 -0500
Re: Conformal Coat and Bubbles
Phil Bavaro
Thu, 21 Mar 2013 17:01:43 +0000
Re: Conformal Coat and Bubbles
Whittaker, Dewey (EHCOE)
Thu, 21 Mar 2013 16:16:09 +0000
Re: Conformal Coat and Bubbles
Garcia, Rigo (GSFC-300.0)[ARES CORP]
Thu, 21 Mar 2013 10:31:23 -0500
Re: Conformal Coat and Bubbles
Garcia, Rigo (GSFC-300.0)[ARES CORP]
Thu, 21 Mar 2013 10:29:31 -0500
Re: Conformal Coat and Bubbles
Wayne Thayer
Thu, 21 Mar 2013 15:29:56 +0000
Conformal Coat and Bubbles
Douglas Pauls
Thu, 21 Mar 2013 10:18:44 -0500
New Thread Conformal Coating and J1 / 610
Re: Conformal Coating and J1 / 610
Douglas Pauls
Mon, 11 Mar 2013 07:07:39 -0500
Re: Conformal Coating and J1 / 610
Douglas Pauls
Mon, 11 Mar 2013 06:48:29 -0500
Re: Conformal Coating and J1 / 610
Graham Naisbitt
Mon, 11 Mar 2013 11:07:24 +0000
Re: Conformal Coating and J1 / 610
Lloyd Duso
Fri, 8 Mar 2013 15:28:45 -0500
Re: Conformal Coating and J1 / 610
Larry Dzaugis
Fri, 8 Mar 2013 14:04:15 -0600
Re: Conformal Coating and J1 / 610
Lloyd Duso
Fri, 8 Mar 2013 12:19:27 -0500
Re: Conformal Coating and J1 / 610
Larry Dzaugis
Fri, 8 Mar 2013 09:48:14 -0600
Re: Conformal Coating and J1 / 610
David Douthit
Fri, 8 Mar 2013 08:19:46 -0700
Re: Conformal Coating and J1 / 610
Douglas Pauls
Fri, 8 Mar 2013 06:43:13 -0600
Re: Conformal Coating and J1 / 610
Goodyear, Patrick
Fri, 8 Mar 2013 04:39:13 +0000
Re: Conformal Coating and J1 / 610
Goodyear, Patrick
Fri, 8 Mar 2013 04:17:08 +0000
Re: Conformal Coating and J1 / 610
Tontis, Theodore
Thu, 7 Mar 2013 13:15:34 -0500
Re: Conformal Coating and J1 / 610
Stadem, Richard D.
Thu, 7 Mar 2013 18:10:33 +0000
Re: Conformal Coating and J1 / 610
Whittaker, Dewey (EHCOE)
Thu, 7 Mar 2013 18:08:03 +0000
Re: Conformal Coating and J1 / 610
Stadem, Richard D.
Thu, 7 Mar 2013 18:03:36 +0000
Re: Conformal Coating and J1 / 610
Tontis, Theodore
Thu, 7 Mar 2013 12:27:35 -0500
Re: Conformal Coating and J1 / 610
Whittaker, Dewey (EHCOE)
Thu, 7 Mar 2013 17:26:45 +0000
Re: Conformal Coating and J1 / 610
MacFadden, Todd
Thu, 7 Mar 2013 17:20:59 +0000
Re: Conformal Coating and J1 / 610
Brian Ellis
Thu, 7 Mar 2013 19:03:40 +0200
Re: Conformal Coating and J1 / 610
Douglas Pauls
Thu, 7 Mar 2013 10:54:31 -0600
Re: Conformal Coating and J1 / 610
Tontis, Theodore
Thu, 7 Mar 2013 11:45:03 -0500
Re: Conformal Coating and J1 / 610
Douglas Pauls
Thu, 7 Mar 2013 10:33:16 -0600
Re: Conformal Coating and J1 / 610
lee Hitchens
Thu, 7 Mar 2013 16:28:18 +0000
Re: Conformal Coating and J1 / 610
Lloyd Duso
Thu, 7 Mar 2013 11:17:49 -0500
Conformal Coating and J1 / 610
Douglas Pauls
Thu, 7 Mar 2013 10:06:02 -0600
New Thread Cooling of Solder Paste Overnight
Re: Cooling of Solder Paste Overnight
Inge Hernefjord
Thu, 14 Mar 2013 04:30:08 -0700
Re: Cooling of Solder Paste Overnight
Mike Fenner
Wed, 13 Mar 2013 18:31:41 +0000
Re: Cooling of Solder Paste Overnight
Whittaker, Dewey (EHCOE)
Wed, 13 Mar 2013 17:39:27 +0000
Re: Cooling of Solder Paste Overnight
Mike Fenner
Wed, 13 Mar 2013 16:46:11 +0000
Re: Cooling of Solder Paste Overnight
David D. Hillman
Wed, 13 Mar 2013 11:32:26 -0500
Re: Cooling of Solder Paste Overnight
Richard D. Krug
Wed, 13 Mar 2013 12:22:47 -0400
Re: Cooling of Solder Paste Overnight
David D. Hillman
Wed, 13 Mar 2013 11:04:17 -0500
Re: Cooling of Solder Paste Overnight
Whittaker, Dewey (EHCOE)
Wed, 13 Mar 2013 14:37:26 +0000
Cooling of Solder Paste Overnight
Richard D. Krug
Wed, 13 Mar 2013 08:40:29 -0400
New Thread corrosion under Solder Mask
Re: Fw: corrosion under Solder Mask
Inge Hernefjord
Mon, 4 Mar 2013 23:06:55 +0100
Re: corrosion under Solder Mask
Ramakrishnan Saravanan
Mon, 4 Mar 2013 07:29:10 -0600
Re: corrosion under Solder Mask
Stadem, Richard D.
Mon, 4 Mar 2013 11:56:51 +0000
Re: corrosion under Solder Mask
Inge Hernefjord
Mon, 4 Mar 2013 07:37:15 +0100
Re: corrosion under Solder Mask
Vladimir Igoshev
Mon, 4 Mar 2013 01:26:04 +0000
Re: corrosion under Solder Mask
Terrym
Sun, 3 Mar 2013 20:11:14 -0500
Re: corrosion under Solder Mask
Inge Hernefjord
Sun, 3 Mar 2013 22:31:42 +0100
Re: corrosion under Solder Mask
Terrym
Sat, 2 Mar 2013 22:41:22 -0500
Re: corrosion under Solder Mask
Terrym
Sat, 2 Mar 2013 22:39:23 -0500
Re: corrosion under Solder Mask
Vladimir Igoshev
Sun, 3 Mar 2013 02:07:23 +0000
Re: corrosion under Solder Mask
Ramakrishnan Saravanan
Sat, 2 Mar 2013 19:15:17 -0600
Re: corrosion under Solder Mask
Vladimir Igoshev
Sat, 2 Mar 2013 23:29:17 +0000
corrosion under Solder Mask
Ramakrishnan Saravanan
Sat, 2 Mar 2013 17:13:34 -0600
New Thread Detecting Cut Wire Strands on Insulation Displacement Cables
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Wayne Thayer
Fri, 29 Mar 2013 13:38:34 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Wayne Thayer
Thu, 28 Mar 2013 14:13:59 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Paul Black
Thu, 28 Mar 2013 13:02:09 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Victor Hernandez
Thu, 28 Mar 2013 07:51:02 -0500
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Joyce Koo
Thu, 28 Mar 2013 12:39:30 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Paul Black
Thu, 28 Mar 2013 12:22:17 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Goodyear, Patrick
Thu, 28 Mar 2013 04:00:21 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Victor Hernandez
Tue, 26 Mar 2013 09:51:58 -0500
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Wayne Thayer
Tue, 26 Mar 2013 14:37:14 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Paul Black
Tue, 26 Mar 2013 14:19:53 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Frederick Miller
Tue, 26 Mar 2013 14:14:04 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Paul Black
Tue, 26 Mar 2013 09:06:01 -0500
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Frederick Miller
Tue, 26 Mar 2013 13:51:38 +0000
Re: Detecting Cut Wire Strands on Insulation Displacement Cables
Victor Hernandez
Tue, 26 Mar 2013 08:51:24 -0500
Detecting Cut Wire Strands on Insulation Displacement Cables
Paul Black
Tue, 26 Mar 2013 08:20:35 -0500
New Thread Diva's name
Re: Diva's name
Stadem, Richard D.
Mon, 4 Mar 2013 13:12:20 +0000
Re: Diva's name
Inge Hernefjord
Mon, 4 Mar 2013 14:05:55 +0100
New Thread Drop box
Re: Drop box
Steven Kelly
Tue, 5 Mar 2013 17:28:54 -0500
Re: Drop box
Rivera, Raye
Tue, 5 Mar 2013 11:26:07 -0800
Re: Drop box
Victor Hernandez
Tue, 5 Mar 2013 13:17:09 -0600
New Thread Dropbox
Re: Dropbox
Laura J Turbini
Fri, 29 Mar 2013 12:37:05 -0400
Re: Dropbox
Drew meyer
Fri, 29 Mar 2013 11:25:18 -0500
Dropbox
Inge Hernefjord
Fri, 29 Mar 2013 09:05:19 -0700
Dropbox
Inge Hernefjord
Mon, 25 Mar 2013 13:45:53 -0700
Dropbox
Inge Hernefjord
Fri, 15 Mar 2013 19:55:30 +0100
Dropbox
Inge Hernefjord
Thu, 14 Mar 2013 03:03:26 -0700
Re: Dropbox
Douglas Pauls
Mon, 11 Mar 2013 07:00:21 -0500
Dropbox
Inge Hernefjord
Sat, 9 Mar 2013 19:21:47 +0100
Dropbox
Inge Hernefjord
Sat, 9 Mar 2013 00:54:54 -0800
Dropbox
Inge Hernefjord
Fri, 8 Mar 2013 00:32:57 +0100
Re: Dropbox
Gönül Özden
Wed, 6 Mar 2013 17:00:14 +0200
Re: Dropbox
Stadem, Richard D.
Wed, 6 Mar 2013 14:25:57 +0000
Re: Dropbox
James Head
Wed, 6 Mar 2013 14:12:07 +0000
Re: Dropbox
Goodyear, Patrick
Wed, 6 Mar 2013 13:13:47 +0000
Re: Dropbox
Goodyear, Patrick
Wed, 6 Mar 2013 12:30:30 +0000
Re: Dropbox
Victor Hernandez
Wed, 6 Mar 2013 06:25:55 -0600
Re: Dropbox
Victor Hernandez
Wed, 6 Mar 2013 06:24:39 -0600
Dropbox
Inge Hernefjord
Wed, 6 Mar 2013 10:06:01 +0100
Re: Dropbox
Rivera, Raye
Tue, 5 Mar 2013 14:49:27 -0800
Dropbox
Inge Hernefjord
Tue, 5 Mar 2013 23:09:19 +0100
Re: Dropbox
Inge Hernefjord
Tue, 5 Mar 2013 22:54:16 +0100
Re: Dropbox
Stadem, Richard D.
Tue, 5 Mar 2013 19:45:25 +0000
Re: Dropbox
Douglas Pauls
Tue, 5 Mar 2013 12:47:08 -0600
Dropbox
Inge Hernefjord
Tue, 5 Mar 2013 19:16:12 +0100
Re: Dropbox
Inge Hernefjord
Tue, 5 Mar 2013 14:49:27 +0100
Re: Dropbox
Jean-Francois Bissonnette
Tue, 5 Mar 2013 08:29:19 -0500
Dropbox
Grossmann, Guenter
Tue, 5 Mar 2013 08:17:30 +0000
Dropbox
Inge Hernefjord
Mon, 4 Mar 2013 22:06:04 +0100
New Thread Dropbox need feedback
Re: Dropbox need feedback
Inge Hernefjord
Tue, 5 Mar 2013 01:45:00 +0100
Re: Dropbox need feedback
Wenger, George M.
Mon, 4 Mar 2013 15:26:56 -0600
Re: Dropbox need feedback
Frank Kimmey
Mon, 4 Mar 2013 13:16:59 -0800
Re: Dropbox need feedback
Linaks Microelectronics Ltd
Sat, 2 Mar 2013 16:08:50 -0800
Re: Dropbox need feedback
Inge Hernefjord
Sat, 2 Mar 2013 18:57:23 +0100
Re: Dropbox need feedback
Wayne Thayer
Sat, 2 Mar 2013 17:10:15 +0000
Dropbox need feedback
Inge Hernefjord
Sat, 2 Mar 2013 17:15:33 +0100
New Thread Excellent Discssion on Vater Vapor
Re: Excellent Discssion on Vater Vapor
Steven Creswick
Wed, 13 Mar 2013 07:18:36 -0400
Re: Excellent Discssion on Vater Vapor
Bev Christian
Tue, 12 Mar 2013 20:13:54 -0400
Excellent Discssion on Vater Vapor
Robert Kondner
Tue, 12 Mar 2013 19:29:14 -0400
New Thread Explaining why pretty solder joints arn't good solder joints
Re: Explaining why pretty solder joints arn't good solder joints
Pete
Thu, 21 Mar 2013 13:00:33 -0500
Re: Explaining why pretty solder joints arn't good solder joints
Wayne Thayer
Thu, 21 Mar 2013 19:24:26 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Pete
Thu, 21 Mar 2013 16:05:59 -0500
Re: Explaining why pretty solder joints arn't good solder joints
Stadem, Richard D.
Thu, 21 Mar 2013 18:31:55 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Glidden, Kevin
Thu, 21 Mar 2013 17:51:09 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Glidden, Kevin
Thu, 21 Mar 2013 18:04:09 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Tontis, Theodore
Thu, 21 Mar 2013 14:48:10 -0400
Re: Explaining why pretty solder joints arn't good solder joints
Whittaker, Dewey (EHCOE)
Thu, 21 Mar 2013 19:57:19 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Stadem, Richard D.
Thu, 21 Mar 2013 19:27:54 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Wayne Thayer
Thu, 21 Mar 2013 19:24:26 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Tontis, Theodore
Thu, 21 Mar 2013 14:48:10 -0400
Re: Explaining why pretty solder joints arn't good solder joints
Stadem, Richard D.
Thu, 21 Mar 2013 18:31:55 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Glidden, Kevin
Thu, 21 Mar 2013 18:04:09 +0000
Re: Explaining why pretty solder joints arn't good solder joints
Pete
Thu, 21 Mar 2013 13:00:33 -0500
Re: Explaining why pretty solder joints arn't good solder joints
Glidden, Kevin
Thu, 21 Mar 2013 17:51:09 +0000
Explaining why pretty solder joints arn't good solder joints
Pete
Thu, 21 Mar 2013 08:41:22 -0500
New Thread EXTERNAL: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Re: EXTERNAL: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Gervascio, Thomas L
Fri, 22 Mar 2013 21:37:01 +0000
New Thread EXTERNAL: [TN] Explaining why pretty solder joints arn't good solder joints
Re: EXTERNAL: [TN] Explaining why pretty solder joints arn't good solder joints
Gumpert, Ben
Thu, 21 Mar 2013 15:32:54 +0000
New Thread EXTERNAL: [TN] Requirements for Dry Cabinet
Re: EXTERNAL: [TN] Requirements for Dry Cabinet
Bob Landman
Tue, 5 Mar 2013 16:15:49 -0500
Re: EXTERNAL: [TN] Requirements for Dry Cabinet
Robert Kondner
Tue, 5 Mar 2013 14:51:48 -0500
Re: EXTERNAL: [TN] Requirements for Dry Cabinet
Gumpert, Ben
Tue, 5 Mar 2013 18:56:09 +0000
New Thread Extra Lead Free solder in wave solder pot...
Re: Extra Lead Free solder in wave solder pot...
David D. Hillman
Thu, 14 Mar 2013 07:05:30 -0500
Re: Extra Lead Free solder in wave solder pot...
Mike Fenner
Thu, 14 Mar 2013 10:38:36 +0000
Re: Extra Lead Free solder in wave solder pot...
Larry Dzaugis
Wed, 13 Mar 2013 20:42:53 -0500
Re: Extra Lead Free solder in wave solder pot...
Bev Christian
Wed, 13 Mar 2013 21:38:11 -0400
Extra Lead Free solder in wave solder pot...
Steve Gregory
Wed, 13 Mar 2013 20:20:59 -0400
New Thread Friday Quiz
Friday Quiz
Whittaker, Dewey (EHCOE)
Fri, 1 Mar 2013 15:52:56 +0000
New Thread guess an artist
guess an artist
Inge Hernefjord
Fri, 1 Mar 2013 21:26:51 +0100
New Thread how is "oxygen-free" defined and measured?
Re: how is "oxygen-free" defined and measured?
Whittaker, Dewey (EHCOE)
Mon, 4 Mar 2013 15:07:25 +0000
Re: how is "oxygen-free" defined and measured?
Mike Fenner
Mon, 4 Mar 2013 14:55:27 +0000
Re: how is "oxygen-free" defined and measured?
Steven Creswick
Sat, 2 Mar 2013 06:10:03 -0500
Re: how is "oxygen-free" defined and measured?
Steven Creswick
Fri, 1 Mar 2013 19:00:24 -0500
Re: how is "oxygen-free" defined and measured?
David D. Hillman
Fri, 1 Mar 2013 17:31:30 -0600
how is "oxygen-free" defined and measured?
Robert James
Fri, 1 Mar 2013 16:19:04 -0600
New Thread Humidity Measurements: Relative or Absolute
Re: Humidity Measurements: Relative or Absolute
Inge Hernefjord
Mon, 18 Mar 2013 08:26:19 +0100
Re: Humidity Measurements: Relative or Absolute
Gerry Gagnon
Sat, 16 Mar 2013 04:59:49 -0400
Re: Humidity Measurements: Relative or Absolute
Bob Landman
Sun, 10 Mar 2013 19:47:31 -0400
Re: Humidity Measurements: Relative or Absolute
Brian Ellis
Sat, 9 Mar 2013 10:08:02 +0200
Re: Humidity Measurements: Relative or Absolute
Larry Dzaugis
Fri, 8 Mar 2013 20:35:35 -0600
Re: Humidity Measurements: Relative or Absolute
Bob Landman
Fri, 8 Mar 2013 20:22:48 -0500
Re: Humidity Measurements: Relative or Absolute
Bev Christian
Fri, 8 Mar 2013 20:14:54 -0500
Re: Humidity Measurements: Relative or Absolute
Steven Creswick
Fri, 8 Mar 2013 18:00:26 -0500
Re: Humidity Measurements: Relative or Absolute
Brian Stumm
Fri, 8 Mar 2013 13:02:36 -0800
Re: Humidity Measurements: Relative or Absolute
Bob Landman
Fri, 8 Mar 2013 15:43:23 -0500
Re: Humidity Measurements: Relative or Absolute
Robert Kondner
Fri, 8 Mar 2013 15:07:36 -0500
Re: Humidity Measurements: Relative or Absolute
Steven Creswick
Fri, 8 Mar 2013 14:51:51 -0500
Re: Humidity Measurements: Relative or Absolute
Larry Dzaugis
Fri, 8 Mar 2013 13:44:32 -0600
Re: Humidity Measurements: Relative or Absolute
Bob Landman
Fri, 8 Mar 2013 14:35:09 -0500
Re: Humidity Measurements: Relative or Absolute
Steven Creswick
Fri, 8 Mar 2013 14:25:11 -0500
Re: Humidity Measurements: Relative or Absolute
Bob Landman
Fri, 8 Mar 2013 14:21:37 -0500
Re: Humidity Measurements: Relative or Absolute
Robert Kondner
Fri, 8 Mar 2013 14:16:29 -0500
Re: Humidity Measurements: Relative or Absolute
Chuck Brummer
Fri, 8 Mar 2013 10:50:13 -0800
Re: Humidity Measurements: Relative or Absolute
Steven Creswick
Fri, 8 Mar 2013 13:32:49 -0500
Re: Humidity Measurements: Relative or Absolute
Robert Kondner
Fri, 8 Mar 2013 12:37:19 -0500
Re: Humidity Measurements: Relative or Absolute
Steven Creswick
Fri, 8 Mar 2013 11:35:05 -0500
Humidity Measurements: Relative or Absolute
Robert Kondner
Fri, 8 Mar 2013 11:23:44 -0500
New Thread I thin this is the correct Diva's name
Re: I thin this is the correct Diva's name
Inge Hernefjord
Tue, 5 Mar 2013 14:44:05 +0100
New Thread INACTIVE MIL-PRF DOCUMENTS
Re: INACTIVE MIL-PRF DOCUMENTS
Inge Hernefjord
Thu, 14 Mar 2013 03:31:10 -0700
INACTIVE MIL-PRF DOCUMENTS
Ramakrishnan Saravanan
Mon, 11 Mar 2013 11:02:43 -0500
New Thread IPC 6012 Class 3 Approval
IPC 6012 Class 3 Approval
Pradeep Menon
Tue, 26 Mar 2013 10:30:04 +0000
New Thread IPC procedure for disconnecting one soldered lead of a SMT component
Re: IPC procedure for disconnecting one soldered lead of a SMT component
Inge Hernefjord
Thu, 14 Mar 2013 03:47:41 -0700
Re: IPC procedure for disconnecting one soldered lead of a SMT component
Stadem, Richard D.
Tue, 12 Mar 2013 15:49:16 +0000
IPC procedure for disconnecting one soldered lead of a SMT component
Mordechai Kirshenbaum
Tue, 12 Mar 2013 10:30:18 -0500
New Thread IPC-6012
Re: IPC-6012
Gerry Gagnon
Sat, 16 Mar 2013 03:17:58 -0400
Re: IPC-6012
Vladimir Igoshev
Thu, 14 Mar 2013 16:19:16 +0000
Re: IPC-6012
John Burke
Thu, 14 Mar 2013 08:08:21 -0800
Re: IPC-6012
Inge Hernefjord
Thu, 14 Mar 2013 17:01:26 +0100
Re: IPC-6012
John Parsons
Thu, 14 Mar 2013 08:48:58 -0700
Re: IPC-6012
<>
Thu, 14 Mar 2013 11:18:52 -0400
Re: IPC-6012
<>
Thu, 14 Mar 2013 11:05:44 -0400
Re: IPC-6012
Steven Kelly
Thu, 14 Mar 2013 09:55:11 -0400
Re: IPC-6012
Vladimir Igoshev
Thu, 14 Mar 2013 12:52:00 +0000
Re: IPC-6012
Victor Hernandez
Thu, 14 Mar 2013 07:44:27 -0500
Re: IPC-6012
Paul Reid
Thu, 14 Mar 2013 08:25:17 -0400
Re: IPC-6012
Vladimir Igoshev
Wed, 13 Mar 2013 23:55:39 +0000
Re: IPC-6012
Vladimir Igoshev
Wed, 13 Mar 2013 23:51:48 +0000
Re: IPC-6012
Wayne Thayer
Wed, 13 Mar 2013 23:09:34 +0000
Re: IPC-6012
John Parsons
Wed, 13 Mar 2013 16:05:32 -0700
Re: IPC-6012
Steve Gregory
Wed, 13 Mar 2013 18:50:59 -0400
Re: IPC-6012
Vladimir Igoshev
Wed, 13 Mar 2013 22:03:33 +0000
Re: IPC-6012
Robert Kondner
Wed, 13 Mar 2013 17:51:14 -0400
IPC-6012
Vladimir Igoshev. PhD
Wed, 13 Mar 2013 17:18:02 -0400
New Thread IPC-7095C vs IPC-4556 ENEPIG for SnPb
Re: IPC-7095C vs IPC-4556 ENEPIG for SnPb
David D. Hillman
Wed, 13 Mar 2013 07:00:38 -0500
Re: IPC-7095C vs IPC-4556 ENEPIG for SnPb
Per-Erik Tegehall
Wed, 13 Mar 2013 09:17:07 +0000
Re: IPC-7095C vs IPC-4556 ENEPIG for SnPb
Vladimir Igoshev
Tue, 12 Mar 2013 23:05:40 +0000
Re: IPC-7095C vs IPC-4556 ENEPIG for SnPb
David D. Hillman
Tue, 12 Mar 2013 17:46:52 -0500
Re: IPC-7095C vs IPC-4556 ENEPIG for SnPb
David D. Hillman
Tue, 12 Mar 2013 17:24:13 -0500
IPC-7095C vs IPC-4556 ENEPIG for SnPb
Glidden, Kevin
Tue, 12 Mar 2013 21:33:20 +0000
New Thread Low Tin Levels in wave solder pot...
Re: Low Tin Levels in wave solder pot...
Ahne Oosterhof
Sun, 17 Mar 2013 21:16:02 -0700
Re: Low Tin Levels in wave solder pot...
Yu-Shan Han
Fri, 15 Mar 2013 15:20:58 -0700
Re: Low Tin Levels in wave solder pot...
David D. Hillman
Fri, 15 Mar 2013 15:13:39 -0500
Re: Low Tin Levels in wave solder pot...
Steve Gregory
Fri, 15 Mar 2013 15:28:16 -0400
Re: Low Tin Levels in wave solder pot...
Mike Fenner
Fri, 15 Mar 2013 18:14:02 +0000
Re: Low Tin Levels in wave solder pot...
Steve Gregory
Fri, 15 Mar 2013 14:13:39 -0400
Re: Low Tin Levels in wave solder pot...
Steve Gregory
Fri, 15 Mar 2013 10:33:32 -0400
Re: Low Tin Levels in wave solder pot...
David D. Hillman
Fri, 15 Mar 2013 06:38:46 -0500
Re: Low Tin Levels in wave solder pot...
Yu-Shan Han
Thu, 14 Mar 2013 20:15:02 -0700
Low Tin Levels in wave solder pot...
Steve Gregory
Thu, 14 Mar 2013 18:56:54 -0400
New Thread Mixing Solders
Re: Mixing Solders
Goodyear, Patrick
Fri, 15 Mar 2013 05:49:04 +0000
Re: Mixing Solders
David D. Hillman
Wed, 13 Mar 2013 11:22:04 -0500
Re: Mixing Solders
Vladimir Igoshev
Tue, 12 Mar 2013 23:08:00 +0000
Mixing Solders
Gregg Owens
Tue, 12 Mar 2013 22:43:00 +0000
New Thread Non-Conductive Via Filling
Re: Non-Conductive Via Filling
Larry Dzaugis
Wed, 6 Mar 2013 19:35:31 -0600
Non-Conductive Via Filling
David Quiroz
Wed, 6 Mar 2013 16:07:48 -0700
New Thread Non-HASL finishes and J-STD-003B durability conditioning
Re: Non-HASL finishes and J-STD-003B durability conditioning
David D. Hillman
Mon, 25 Mar 2013 08:12:00 -0500
Non-HASL finishes and J-STD-003B durability conditioning
Louis Hart
Sat, 23 Mar 2013 20:55:21 +0000
New Thread Notes in PCB Fabrication
Re: Notes in PCB Fabrication
Larry Dzaugis
Fri, 1 Mar 2013 13:52:10 -0600
Re: Notes in PCB Fabrication
Jack Olson
Fri, 1 Mar 2013 10:24:31 -0600
Re: Notes in PCB Fabrication
Upton, Shawn
Fri, 1 Mar 2013 15:52:46 +0000
Re: Notes in PCB Fabrication
Upton, Shawn
Fri, 1 Mar 2013 15:44:26 +0000
Re: Notes in PCB Fabrication
Whittaker, Dewey (EHCOE)
Fri, 1 Mar 2013 15:39:48 +0000
Re: Notes in PCB Fabrication
Pete
Fri, 1 Mar 2013 09:36:43 -0600
Re: Notes in PCB Fabrication
Nutting, Phil
Fri, 1 Mar 2013 15:35:50 +0000
Re: Notes in PCB Fabrication
Upton, Shawn
Fri, 1 Mar 2013 14:52:56 +0000
New Thread NTC 37 seconds video
Re: NTC 37 seconds video
Gary Crowell
Thu, 7 Mar 2013 08:58:42 -0700
Re: NTC 37 seconds video
Goodyear, Patrick
Thu, 7 Mar 2013 05:13:05 +0000
Re: NTC 37 seconds video
Ed Popielarski
Wed, 6 Mar 2013 21:56:26 +0000
NTC 37 seconds video
Inge Hernefjord
Sat, 2 Mar 2013 08:13:18 +0100
New Thread NTC Friday Element Quiz Answer
Re: NTC Friday Element Quiz Answer
Brian Ellis
Sat, 30 Mar 2013 09:46:21 +0200
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 29 Mar 2013 16:17:16 -0500
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 22 Mar 2013 14:46:31 -0500
Re: NTC Friday Element Quiz Answer
Ed Popielarski
Mon, 18 Mar 2013 18:57:09 +0000
Re: NTC Friday Element Quiz Answer
Brian Ellis
Mon, 18 Mar 2013 17:24:33 +0200
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Mon, 18 Mar 2013 15:03:36 +0000
Re: NTC Friday Element Quiz Answer
Brian Ellis
Mon, 18 Mar 2013 16:12:57 +0200
Re: NTC Friday Element Quiz Answer
Stadem, Richard D.
Mon, 18 Mar 2013 11:40:35 +0000
Re: NTC Friday Element Quiz Answer
Chuck Brummer
Fri, 15 Mar 2013 09:57:10 -0700
Re: NTC Friday Element Quiz Answer
Steve Gregory
Fri, 15 Mar 2013 12:53:41 -0400
Re: NTC Friday Element Quiz Answer
Carroll, Thomas A
Fri, 15 Mar 2013 16:49:31 +0000
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 15 Mar 2013 10:38:24 -0500
Re: NTC Friday Element Quiz Answer
Carroll, Thomas A
Fri, 15 Mar 2013 07:10:27 +0000
Re: NTC Friday Element Quiz Answer
Carroll, Thomas A
Sat, 9 Mar 2013 18:43:08 +0000
Re: NTC Friday Element Quiz Answer
Inge Hernefjord
Sat, 9 Mar 2013 19:25:15 +0100
Re: NTC Friday Element Quiz Answer
Carroll, Thomas A
Sat, 9 Mar 2013 17:50:30 +0000
Re: NTC Friday Element Quiz Answer
David D. Hillman
Sat, 9 Mar 2013 11:43:55 -0600
Re: NTC Friday Element Quiz Answer
Carroll, Thomas A
Sat, 9 Mar 2013 17:39:00 +0000
NTC Friday Element Quiz Answer
David D. Hillman
Sat, 9 Mar 2013 11:30:09 -0600
Re: NTC Friday Element Quiz Answer
James Head
Mon, 4 Mar 2013 13:26:23 +0000
Re: NTC Friday Element Quiz Answer
jrusseau.precisionanalysts.com
Sat, 2 Mar 2013 10:33:23 -0500
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 1 Mar 2013 15:59:35 -0600
Re: NTC Friday Element Quiz Answer
Douglas Pauls
Fri, 1 Mar 2013 07:21:13 -0600
Re: NTC Friday Element Quiz Answer
David D. Hillman
Fri, 1 Mar 2013 07:14:29 -0600
Re: NTC Friday Element Quiz Answer
Goodyear, Patrick
Fri, 1 Mar 2013 11:39:32 +0000
Re: NTC Friday Element Quiz Answer
James Head
Fri, 1 Mar 2013 09:15:17 +0000
New Thread NTC Friday Element Quiz Question
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 29 Mar 2013 13:02:16 -0500
Re: NTC Friday Element Quiz Question
Gregg Owens
Fri, 29 Mar 2013 17:39:28 +0000
Re: NTC Friday Element Quiz Question
lduso - Diamond-MT.com
Fri, 29 Mar 2013 12:56:10 -0400
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 29 Mar 2013 11:53:19 -0500
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 29 Mar 2013 11:37:27 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 29 Mar 2013 11:24:33 -0500
Re: NTC Friday Element Quiz Question
Mordechai Kirshenbaum
Fri, 29 Mar 2013 08:26:15 -0700
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 29 Mar 2013 11:24:08 -0400
Re: NTC Friday Element Quiz Question
Carroll, Thomas A
Fri, 29 Mar 2013 13:34:15 +0000
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Fri, 29 Mar 2013 08:14:11 -0500
Re: NTC Friday Element Quiz Question
Brian Ellis
Fri, 29 Mar 2013 15:13:06 +0200
NTC Friday Element Quiz Question
David D. Hillman
Fri, 29 Mar 2013 07:59:13 -0500
Re: NTC Friday Element Quiz Question
Phil Kinner
Thu, 28 Mar 2013 23:52:17 +0000
Re: NTC Friday Element Quiz Question
David D. Hillman
Thu, 28 Mar 2013 17:56:15 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 22 Mar 2013 15:01:38 -0500
Re: NTC Friday Element Quiz Question
Steve Mikell
Fri, 22 Mar 2013 14:20:17 -0400
Re: NTC Friday Element Quiz Question
Arbour, Michel
Fri, 22 Mar 2013 14:24:58 -0400
Re: NTC Friday Element Quiz Question
Phil Kinner
Fri, 22 Mar 2013 18:21:51 +0000
NTC Friday Element Quiz Question
David D. Hillman
Fri, 22 Mar 2013 13:13:22 -0500
Re: NTC Friday Element Quiz Question
Arbour, Michel
Fri, 15 Mar 2013 09:26:38 -0400
Re: NTC Friday Element Quiz Question
Blair Hogg
Fri, 15 Mar 2013 08:03:05 -0500
Re: NTC Friday Element Quiz Question
Bush, Brien
Fri, 15 Mar 2013 07:32:19 -0400
Re: NTC Friday Element Quiz Question
Richard D. Krug
Fri, 15 Mar 2013 07:15:02 -0400
Re: NTC Friday Element Quiz Question
Gönül Özden
Fri, 15 Mar 2013 09:00:22 +0200
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Fri, 15 Mar 2013 02:53:07 +0000
Re: NTC Friday Element Quiz Question
Rivera, Raye
Thu, 14 Mar 2013 16:43:30 -0700
Re: NTC Friday Element Quiz Question
John Anselmo
Thu, 14 Mar 2013 23:30:52 +0000
Re: NTC Friday Element Quiz Question
Steve Gregory
Thu, 14 Mar 2013 19:08:00 -0400
Re: NTC Friday Element Quiz Question
Chuck Brummer
Thu, 14 Mar 2013 16:01:22 -0700
Re: NTC Friday Element Quiz Question
Mark Kostinovsky
Thu, 14 Mar 2013 22:58:10 +0000
NTC Friday Element Quiz Question
David D. Hillman
Thu, 14 Mar 2013 17:52:46 -0500
Re: NTC Friday Element Quiz Question
Brian Ellis
Mon, 11 Mar 2013 18:02:20 +0200
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Mon, 11 Mar 2013 15:12:52 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Mon, 11 Mar 2013 08:50:39 -0500
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Mon, 11 Mar 2013 13:33:11 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Mon, 11 Mar 2013 07:02:27 -0500
Re: NTC Friday Element Quiz Question
David D. Hillman
Sun, 10 Mar 2013 22:13:33 -0500
Re: NTC Friday Element Quiz Question
Inge Hernefjord
Fri, 8 Mar 2013 16:46:22 +0100
Re: NTC Friday Element Quiz Question
Robert Wolfe
Fri, 8 Mar 2013 09:54:31 -0500
Re: NTC Friday Element Quiz Question
Leland Woodall
Fri, 8 Mar 2013 14:49:24 +0000
Re: NTC Friday Element Quiz Question
Matthias Mansfeld
Fri, 8 Mar 2013 15:30:33 +0100
Re: NTC Friday Element Quiz Question
Carroll, Thomas A
Fri, 8 Mar 2013 14:24:50 +0000
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Fri, 8 Mar 2013 08:22:50 -0600
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 8 Mar 2013 08:13:41 -0600
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 8 Mar 2013 06:52:49 -0600
Re: NTC Friday Element Quiz Question
Nigel Burtt
Fri, 8 Mar 2013 06:02:03 -0600
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Fri, 8 Mar 2013 03:51:40 +0000
Re: NTC Friday Element Quiz Question
Bev Christian
Thu, 7 Mar 2013 19:45:52 -0500
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Thu, 7 Mar 2013 18:30:25 -0600
Re: NTC Friday Element Quiz Question
John Anselmo
Fri, 8 Mar 2013 00:28:40 +0000
Re: NTC Friday Element Quiz Question
John Burke
Thu, 7 Mar 2013 15:44:18 -0800
Re: NTC Friday Element Quiz Question
Chuck Brummer
Thu, 7 Mar 2013 15:35:39 -0800
Re: NTC Friday Element Quiz Question
Steve Mikell
Thu, 7 Mar 2013 18:28:54 -0500
NTC Friday Element Quiz Question
David D. Hillman
Thu, 7 Mar 2013 17:13:20 -0600
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 1 Mar 2013 09:48:52 -0500
Re: NTC Friday Element Quiz Question
Nowland, Russell Howard (Russell)
Fri, 1 Mar 2013 14:45:49 +0000
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Fri, 1 Mar 2013 14:25:03 +0000
Re: NTC Friday Element Quiz Question
Leland Woodall
Fri, 1 Mar 2013 13:10:16 +0000
Re: NTC Friday Element Quiz Question
jrusseau.precisionanalysts.com
Fri, 1 Mar 2013 07:55:48 -0500
NTC Friday Element Quiz Question
David D. Hillman
Fri, 1 Mar 2013 06:42:52 -0600
New Thread NTC Friday Element Quiz Question - Bayesian Filter detected spam
Re: NTC Friday Element Quiz Question - Bayesian Filter detected spam
Doug Schueller
Fri, 8 Mar 2013 20:02:45 +0000
Re: NTC Friday Element Quiz Question - Bayesian Filter detected spam
Bush, Brien
Fri, 8 Mar 2013 10:18:35 -0500
New Thread ODB++ to gerber?
Re: ODB++ to gerber?
Dave Elder
Sun, 24 Mar 2013 13:50:27 -0500
Re: ODB++ to gerber?
Amol Kane
Fri, 22 Mar 2013 13:09:53 +0000
Re: ODB++ to gerber?
Douglas Pauls
Fri, 22 Mar 2013 08:02:05 -0500
ODB++ to gerber?
Graham Collins
Fri, 22 Mar 2013 09:37:46 -0300
New Thread Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Bev Christian
Wed, 13 Mar 2013 21:39:24 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steve Gregory
Wed, 13 Mar 2013 19:46:12 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Whittaker, Dewey (EHCOE)
Wed, 13 Mar 2013 16:40:42 +0000
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Dennis Fritz
Wed, 13 Mar 2013 12:34:17 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Victor Hernandez
Wed, 13 Mar 2013 09:23:39 -0500
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Douglas Pauls
Wed, 13 Mar 2013 09:18:07 -0500
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steve Gregory
Wed, 13 Mar 2013 10:04:55 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Victor Hernandez
Wed, 13 Mar 2013 05:03:27 -0500
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steven Creswick
Tue, 12 Mar 2013 20:14:07 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steve Gregory
Tue, 12 Mar 2013 17:45:34 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steven Creswick
Tue, 12 Mar 2013 11:47:45 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Inge Hernefjord
Tue, 12 Mar 2013 16:35:17 +0100
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Victor Hernandez
Tue, 12 Mar 2013 10:10:49 -0500
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Tontis, Theodore
Tue, 12 Mar 2013 11:00:17 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Guy Ramsey
Tue, 12 Mar 2013 10:56:47 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steve Gregory
Tue, 12 Mar 2013 09:56:29 -0400
Re: Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Jerry Dengler
Tue, 12 Mar 2013 09:43:52 -0400
Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Craig Cullum
Tue, 12 Mar 2013 08:33:41 -0500
New Thread R: [TN] BGA Rework reflow Profile
R: [TN] BGA Rework reflow Profile
SALA GABRIELE
Wed, 6 Mar 2013 15:02:17 +0100
New Thread Requirements for Dry Cabinet
Requirements for Dry Cabinet
Robert Kondner
Mon, 4 Mar 2013 18:37:55 -0500
New Thread SAC 305 etch
Re: SAC 305 etch
Vladimir Igoshev
Fri, 22 Mar 2013 11:43:54 +0000
Re: SAC 305 etch
John Maxwell
Thu, 21 Mar 2013 20:20:05 -0700
Re: SAC 305 etch
Inge Hernefjord
Fri, 22 Mar 2013 00:37:33 +0100
Re: SAC 305 etch
Stewart McCracken
Thu, 21 Mar 2013 19:48:46 +0000
Re: SAC 305 etch
Whittaker, Dewey (EHCOE)
Thu, 21 Mar 2013 15:29:09 +0000
Re: SAC 305 etch
Steven Creswick
Thu, 21 Mar 2013 11:19:55 -0400
Re: SAC 305 etch
Giamis, Andy
Thu, 21 Mar 2013 09:56:30 -0500
SAC 305 etch
<>
Thu, 21 Mar 2013 07:53:09 -0700
New Thread Solder Mask sensitivity to environment
Re: Solder Mask sensitivity to environment
Chuck Brummer
Sat, 16 Mar 2013 10:08:46 -0700
Solder Mask sensitivity to environment
Ramakrishnan Saravanan
Sat, 16 Mar 2013 11:10:07 -0500
New Thread solder mask thickness
Re: solder mask thickness
Inge Hernefjord
Mon, 4 Mar 2013 13:54:29 +0100
solder mask thickness
Ramakrishnan Saravanan
Fri, 1 Mar 2013 09:31:49 -0600
New Thread Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Steve Gregory
Thu, 21 Mar 2013 19:31:52 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ed Popielarski
Thu, 21 Mar 2013 16:25:42 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ed Popielarski
Thu, 21 Mar 2013 16:25:42 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Goodyear, Patrick
Thu, 21 Mar 2013 03:07:19 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Whittaker, Dewey (EHCOE)
Wed, 20 Mar 2013 14:48:56 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Victor Hernandez
Wed, 20 Mar 2013 09:55:13 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ahne Oosterhof
Wed, 20 Mar 2013 07:39:35 -0700
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Robert Wolfe
Wed, 20 Mar 2013 10:12:28 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Nutting, Phil
Wed, 20 Mar 2013 14:13:11 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Mike Fenner
Wed, 20 Mar 2013 13:41:44 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Nutting, Phil
Wed, 20 Mar 2013 13:37:40 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Douglas Pauls
Wed, 20 Mar 2013 07:17:52 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Bush, Brien
Wed, 20 Mar 2013 07:32:40 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Douglas Pauls
Tue, 19 Mar 2013 15:33:00 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Larry Dzaugis
Tue, 19 Mar 2013 15:27:53 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Douglas Pauls
Tue, 19 Mar 2013 15:18:27 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Stadem, Richard D.
Tue, 19 Mar 2013 20:29:43 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Stadem, Richard D.
Tue, 19 Mar 2013 20:10:47 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Steve Gregory
Tue, 19 Mar 2013 16:54:28 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Larry Dzaugis
Tue, 19 Mar 2013 15:11:00 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Douglas Pauls
Tue, 19 Mar 2013 14:28:44 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Stadem, Richard D.
Tue, 19 Mar 2013 18:30:59 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Larry Dzaugis
Tue, 19 Mar 2013 13:23:22 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Larry Dzaugis
Tue, 19 Mar 2013 13:17:49 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ed Popielarski
Tue, 19 Mar 2013 18:36:56 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ed Popielarski
Tue, 19 Mar 2013 17:33:39 +0000
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ahne Oosterhof
Tue, 19 Mar 2013 10:12:47 -0700
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Steve Gregory
Tue, 19 Mar 2013 13:05:42 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Larry Dzaugis
Tue, 19 Mar 2013 11:59:04 -0500
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Steve Gregory
Tue, 19 Mar 2013 13:01:19 -0400
Re: Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Ed Popielarski
Tue, 19 Mar 2013 16:07:02 +0000
Solder pot capacity of Vitronics/Soltec 6622CC Wave solder machine
Steve Gregory
Tue, 19 Mar 2013 11:53:54 -0400
New Thread solder which does ot scavenge gold
Re: solder which does ot scavenge gold
Bob Landman
Sun, 31 Mar 2013 20:49:09 -0400
Re: solder which does ot scavenge gold
Steven Creswick
Sun, 31 Mar 2013 18:10:30 -0400
Re: solder which does ot scavenge gold
Inge Hernefjord
Sun, 31 Mar 2013 22:13:45 +0200
Re: solder which does ot scavenge gold
Steven Creswick
Sun, 31 Mar 2013 13:43:35 -0400
Re: solder which does ot scavenge gold
Inge Hernefjord
Sun, 31 Mar 2013 19:37:12 +0200
Re: solder which does ot scavenge gold
Inge Hernefjord
Sun, 31 Mar 2013 19:34:30 +0200
Re: solder which does ot scavenge gold
Mike Fenner
Sun, 31 Mar 2013 15:05:51 +0100
Re: solder which does ot scavenge gold
Mike Fenner
Sun, 31 Mar 2013 14:49:07 +0100
Re: solder which does ot scavenge gold
Steven Creswick
Sun, 31 Mar 2013 06:43:17 -0400
Re: solder which does ot scavenge gold
Inge Hernefjord
Sat, 30 Mar 2013 12:37:43 -0700
Re: solder which does ot scavenge gold
Mike Fenner
Sat, 30 Mar 2013 18:55:34 +0000
Re: solder which does ot scavenge gold
Inge Hernefjord
Fri, 29 Mar 2013 08:50:25 -0700
Re: solder which does ot scavenge gold
Wayne Thayer
Fri, 29 Mar 2013 15:05:11 +0000
Re: solder which does ot scavenge gold
Steven Creswick
Fri, 29 Mar 2013 10:57:22 -0400
Re: solder which does ot scavenge gold
David D. Hillman
Fri, 29 Mar 2013 09:17:06 -0500
Re: solder which does ot scavenge gold
Joyce Koo
Fri, 29 Mar 2013 13:52:55 +0000
Re: solder which does ot scavenge gold
Wayne Thayer
Fri, 29 Mar 2013 13:52:59 +0000
Re: solder which does ot scavenge gold
Larry Dzaugis
Fri, 29 Mar 2013 08:51:36 -0500
Re: solder which does ot scavenge gold
Wayne Thayer
Fri, 29 Mar 2013 13:49:12 +0000
Re: solder which does ot scavenge gold
Carroll, Thomas A
Fri, 29 Mar 2013 13:47:16 +0000
Re: solder which does ot scavenge gold
David D. Hillman
Fri, 29 Mar 2013 08:45:43 -0500
solder which does ot scavenge gold
Guy Ramsey
Fri, 29 Mar 2013 09:27:34 -0400
New Thread SOLDERMASK THICKNESS FOR SPRAY COATED MACHINE
SOLDERMASK THICKNESS FOR SPRAY COATED MACHINE
Ramakrishnan Saravanan
Wed, 6 Mar 2013 10:19:45 -0600
New Thread Tape test
Re: Tape test
Inge Hernefjord
Thu, 14 Mar 2013 18:11:25 +0100
Re: Tape test
Inge Hernefjord
Thu, 14 Mar 2013 18:07:26 +0100
Re: Tape test
Ioan Tempea
Wed, 13 Mar 2013 15:28:47 +0000
Re: Tape test
Douglas Pauls
Wed, 13 Mar 2013 08:41:46 -0500
Re: Tape test
Lloyd Duso
Wed, 13 Mar 2013 09:01:44 -0400
Re: Tape test
Douglas Pauls
Wed, 13 Mar 2013 07:48:56 -0500
Tape test
Ioan Tempea
Wed, 13 Mar 2013 12:33:25 +0000
New Thread Thin Film Measurement
Re: Thin Film Measurement
Lloyd Duso
Thu, 14 Mar 2013 09:06:49 -0400
Thin Film Measurement
Bev Christian
Wed, 13 Mar 2013 21:31:03 -0400
New Thread To characterize or not
Re: To characterize or not
Bev Christian
Mon, 18 Mar 2013 20:11:52 -0400
Re: To characterize or not
Inge Hernefjord
Tue, 19 Mar 2013 00:21:47 +0100
Re: To characterize or not
Ed Popielarski
Mon, 18 Mar 2013 19:00:41 +0000
Re: To characterize or not
Bev Christian
Sat, 16 Mar 2013 09:45:05 -0400
Re: To characterize or not
Gerry Gagnon
Sat, 16 Mar 2013 03:11:51 -0400
To characterize or not
Inge Hernefjord
Thu, 14 Mar 2013 23:40:12 +0100
New Thread Wed Whisker call in
Wed Whisker call in
Goodyear, Patrick
Thu, 28 Mar 2013 04:01:45 +0000
New Thread Which ESD Standard
Re: Which ESD Standard
Bob Landman
Tue, 12 Mar 2013 11:39:55 -0400
Re: Which ESD Standard
Whittaker, Dewey (EHCOE)
Tue, 12 Mar 2013 14:58:56 +0000
Re: Which ESD Standard
Stadem, Richard D.
Tue, 12 Mar 2013 14:45:30 +0000
Re: Which ESD Standard
Douglas Pauls
Tue, 12 Mar 2013 09:36:43 -0500
Re: Which ESD Standard
Douglas Pauls
Tue, 12 Mar 2013 09:08:45 -0500
Re: Which ESD Standard
Victor Hernandez
Tue, 12 Mar 2013 08:46:17 -0500
Re: Which ESD Standard
Douglas Pauls
Tue, 12 Mar 2013 08:20:45 -0500
Re: Which ESD Standard
Stadem, Richard D.
Tue, 12 Mar 2013 13:15:48 +0000
Re: Which ESD Standard
Douglas Pauls
Tue, 12 Mar 2013 07:53:49 -0500
Re: Which ESD Standard
Lloyd Duso
Tue, 12 Mar 2013 08:51:58 -0400
Which ESD Standard
Douglas Pauls
Tue, 12 Mar 2013 06:57:44 -0500
New Thread x-ray inspection of PTH barrel fill
Re: x-ray inspection of PTH barrel fill
Lum Wee Mei
Tue, 19 Mar 2013 00:44:55 +0000
Re: x-ray inspection of PTH barrel fill
Gregg Owens
Tue, 19 Mar 2013 00:35:11 +0000
Re: x-ray inspection of PTH barrel fill
Lum Wee Mei
Tue, 19 Mar 2013 00:31:03 +0000
Re: x-ray inspection of PTH barrel fill
Rivera, Raye
Mon, 18 Mar 2013 13:47:57 -0700
Re: x-ray inspection of PTH barrel fill
Stadem, Richard D.
Mon, 18 Mar 2013 18:42:52 +0000
Re: x-ray inspection of PTH barrel fill
Vladimir Igoshev
Mon, 18 Mar 2013 18:35:04 +0000
Re: x-ray inspection of PTH barrel fill
Stadem, Richard D.
Mon, 18 Mar 2013 18:21:09 +0000
Re: x-ray inspection of PTH barrel fill
Stadem, Richard D.
Mon, 18 Mar 2013 18:17:12 +0000
Re: x-ray inspection of PTH barrel fill
Vladimir Igoshev
Mon, 18 Mar 2013 16:49:56 +0000
Re: x-ray inspection of PTH barrel fill
Gregg Owens
Mon, 18 Mar 2013 16:47:15 +0000
Re: x-ray inspection of PTH barrel fill
Whittaker, Dewey (EHCOE)
Mon, 18 Mar 2013 16:43:19 +0000
Re: x-ray inspection of PTH barrel fill
Larry Dzaugis
Mon, 18 Mar 2013 11:22:53 -0500
Re: x-ray inspection of PTH barrel fill
Victor Hernandez
Mon, 18 Mar 2013 11:04:20 -0500
x-ray inspection of PTH barrel fill
Rivera, Raye
Mon, 18 Mar 2013 08:54:05 -0700

ATOM RSS1 RSS2