LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Douglas Pauls

Thu, 29 Sep 2011 11:14:15 -0500

Temkin, Gregg

Thu, 29 Sep 2011 16:04:59 +0000

Stadem, Richard D.

Thu, 29 Sep 2011 10:48:55 -0500

Douglas Pauls

Thu, 29 Sep 2011 10:33:38 -0500

"Compatibility" testing of fluxes

Karen Tellefsen

Thu, 29 Sep 2011 11:25:39 -0400

Temkin, Gregg

Thu, 29 Sep 2011 15:19:37 +0000

(NTC) Friday!

R Sedlak

Fri, 2 Sep 2011 13:06:39 -0700

Amol Kane

Wed, 28 Sep 2011 14:02:20 -0400

Baking MSD Devices

Blair Hogg

Tue, 27 Sep 2011 12:13:40 -0500

Mumtaz Bora

Mon, 26 Sep 2011 13:41:15 -0700

Hogg, Blair K.

Mon, 26 Sep 2011 16:10:38 -0400

Reuven. ROKAH

Mon, 26 Sep 2011 23:09:42 +0300

Stadem, Richard D.

Mon, 26 Sep 2011 14:48:54 -0500

Baking MSD Devices

Blair Hogg

Mon, 26 Sep 2011 14:16:21 -0500

Birdcaging

Re: Birdcaging

Glidden, Kevin

Tue, 20 Sep 2011 14:11:12 -0400

Re: Birdcaging

Goodyear, Patrick

Tue, 20 Sep 2011 18:04:27 +0000

Birdcaging

Juan T. Marugan

Tue, 20 Sep 2011 12:04:27 -0500

Board question

vladimir Igoshev

Fri, 30 Sep 2011 11:43:42 +0000

Thayer, Wayne - IIW

Thu, 29 Sep 2011 20:19:07 -0400

vladimir Igoshev

Thu, 29 Sep 2011 19:49:21 +0000

Stadem, Richard D.

Thu, 29 Sep 2011 14:44:51 -0500

vladimir Igoshev

Thu, 29 Sep 2011 19:37:31 +0000

vladimir Igoshev

Thu, 29 Sep 2011 19:11:37 +0000

vladimir Igoshev

Thu, 29 Sep 2011 18:47:40 +0000

Paul Edwards

Thu, 29 Sep 2011 11:35:25 -0700

Paul Reid

Thu, 29 Sep 2011 13:41:27 -0500

vladimir Igoshev

Thu, 29 Sep 2011 18:30:07 +0000

vladimir Igoshev

Thu, 29 Sep 2011 18:29:38 +0000

vladimir Igoshev

Thu, 29 Sep 2011 18:24:21 +0000

Ian Hanna

Thu, 29 Sep 2011 14:20:06 -0400

Joyce Koo

Thu, 29 Sep 2011 14:16:51 -0400

Phil Bavaro

Thu, 29 Sep 2011 11:03:23 -0700

vladimir Igoshev

Thu, 29 Sep 2011 18:02:05 +0000

Joyce Koo

Thu, 29 Sep 2011 14:01:39 -0400

vladimir Igoshev

Thu, 29 Sep 2011 17:54:15 +0000

David D. Hillman

Thu, 29 Sep 2011 12:53:49 -0500

Cleaning Up After The Flood

Joyce Koo

Thu, 29 Sep 2011 13:47:19 -0400

Board question

Vladimir Igoshev. PhD

Thu, 29 Sep 2011 12:49:39 -0400

Gregg Owens

Mon, 12 Sep 2011 16:54:21 -0700

Goodyear, Patrick

Mon, 12 Sep 2011 23:51:44 +0000

Karen Tellefsen

Mon, 12 Sep 2011 08:55:27 -0400

Douglas Pauls

Mon, 12 Sep 2011 07:07:02 -0500

Reuven Rokah

Mon, 12 Sep 2011 08:10:11 +0300

Kane, Joseph E (US SSA)

Sun, 11 Sep 2011 21:01:10 -0400

Joyce Koo

Sun, 11 Sep 2011 19:22:47 -0400

Cleaning Up After The Flood

Bob Landman

Sun, 11 Sep 2011 17:08:44 -0400

Kane, Joseph E (US SSA)

Sun, 11 Sep 2011 15:14:39 -0400

Cleaning/Contamination Book

Re: Cleaning/Contamination Book

Joyce Koo

Thu, 22 Sep 2011 08:44:28 -0400

Re: Cleaning/Contamination Book

Amol Kane

Thu, 22 Sep 2011 08:12:24 -0400

Cleaning/Contamination Book

Brian Ellis

Thu, 22 Sep 2011 13:24:38 +0300

DFM Guidelines v/s IPC Guidelines

Re: DFM Guidelines v/s IPC Guidelines

Douglas Pauls

Thu, 29 Sep 2011 10:12:51 -0500

Re: DFM Guidelines v/s IPC Guidelines

Nowland, Russell Howard (Russell)

Thu, 29 Sep 2011 08:51:18 -0500

Re: DFM Guidelines v/s IPC Guidelines

Phil Nutting

Thu, 29 Sep 2011 09:36:06 -0400

DFM Guidelines v/s IPC Guidelines

prashant chopra

Thu, 29 Sep 2011 18:04:27 +0530

Direct immersion gold

Re: Direct immersion gold

Simon Huetter

Thu, 22 Sep 2011 07:56:14 +0200

Direct immersion gold

Steven Kelly

Tue, 20 Sep 2011 15:38:01 -0500

Dry Cabinets

Jack Evans

Wed, 14 Sep 2011 10:05:31 -0500

Graham Collins

Wed, 14 Sep 2011 07:17:23 -0300

Steven Creswick

Tue, 13 Sep 2011 20:13:58 -0400

Steven Creswick

Tue, 13 Sep 2011 19:49:46 -0400

Blair Hogg

Tue, 13 Sep 2011 15:26:25 -0500

Effect of pressurized air on stencil apertures

Joyce Koo

Tue, 13 Sep 2011 16:16:26 -0400

Dry Cabinets

Blair Hogg

Tue, 13 Sep 2011 15:14:03 -0500

Amol Kane

Thu, 29 Sep 2011 07:56:15 -0400

electroform stencil manufacturer in United States.

Re: electroform stencil manufacturer in United States.

Jon Moore

Wed, 31 Dec 1969 22:24:43 -0500

Re: electroform stencil manufacturer in United States.

Post, Scott E

Wed, 28 Sep 2011 18:10:01 +0000

Re: electroform stencil manufacturer in United States.

Bill Coleman

Wed, 28 Sep 2011 11:43:39 -0500

Re: electroform stencil manufacturer in United States.

Roger Mack

Tue, 27 Sep 2011 16:08:36 -0500

Re: electroform stencil manufacturer in United States.

Larry Dzaugis

Tue, 27 Sep 2011 15:45:55 -0500

Re: electroform stencil manufacturer in United States.

Ahne Oosterhof

Tue, 27 Sep 2011 13:31:48 -0700

Re: electroform stencil manufacturer in United States.

Nowland, Russell Howard (Russell)

Tue, 27 Sep 2011 13:14:56 -0500

electroform stencil manufacturer in United States.

Gervascio, Thomas L

Tue, 27 Sep 2011 14:12:42 -0400

Electroless Ni plating thickness

Steven Creswick

Tue, 6 Sep 2011 08:10:25 -0400

Tue, 6 Sep 2011 07:57:54 +0200

Joyce Koo

Mon, 5 Sep 2011 09:47:11 -0400

Steven Creswick

Mon, 5 Sep 2011 08:47:58 -0400

Fw: Electroless Ni plating thickness

Steven Creswick

Mon, 5 Sep 2011 08:06:49 -0400

Mon, 5 Sep 2011 11:52:17 +0200

electroless tin

Lamar Young

Thu, 15 Sep 2011 15:36:29 -0400

Joe Russeau

Thu, 15 Sep 2011 13:38:33 -0400

R Sedlak

Thu, 15 Sep 2011 10:01:10 -0700

Engineering service for board design

Inge Hernefjord

Thu, 15 Sep 2011 17:26:21 +0200

electroless tin

Lamar Young

Thu, 15 Sep 2011 10:06:39 -0400

Re: Engineering service for board design

Robert Wolfe

Fri, 23 Sep 2011 16:26:36 -0400

Re: Engineering service for board design

Blair Hogg

Fri, 23 Sep 2011 15:14:24 -0500

Re: Engineering service for board design

Ioan Tempea

Fri, 23 Sep 2011 16:02:50 -0400

Engineering service for board design

Charlie Pitarys

Fri, 23 Sep 2011 14:26:52 -0500

ENIG Parts Plating Facility Needed

Re: ENIG Parts Plating Facility Needed

Inge Hernefjord

Fri, 16 Sep 2011 07:19:28 +0200

ENIG Parts Plating Facility Needed

Jana Carraway

Thu, 15 Sep 2011 11:40:38 -0700

ENIG versus LFHASL

Stadem, Richard D.

Mon, 19 Sep 2011 07:59:43 -0500

Reuven Rokah

Sun, 18 Sep 2011 10:11:01 +0300

Mike Fenner

Sat, 17 Sep 2011 20:28:54 +0100

Mike Fenner

Sat, 17 Sep 2011 20:05:40 +0100

Whittaker, Dewey (EHCOE)

Fri, 16 Sep 2011 10:41:40 -0700

Robert Kondner

Fri, 16 Sep 2011 12:52:42 -0400

Bob METCALF

Fri, 16 Sep 2011 08:45:29 -0700

Reuven Rokah

Fri, 16 Sep 2011 17:15:28 +0300

Pete

Fri, 16 Sep 2011 09:03:16 -0500

Reuven Rokah

Fri, 16 Sep 2011 07:50:16 +0300

Stadem, Richard D.

Thu, 15 Sep 2011 17:09:20 -0500

Phil Nutting

Thu, 15 Sep 2011 17:38:40 -0400

Inge Hernefjord

Thu, 15 Sep 2011 23:33:35 +0200

Inge Hernefjord

Thu, 15 Sep 2011 23:27:50 +0200

Stadem, Richard D.

Thu, 15 Sep 2011 16:14:23 -0500

Phil Nutting

Thu, 15 Sep 2011 16:40:06 -0400

Frederick Miller

Thu, 15 Sep 2011 15:39:19 -0400

Stadem, Richard D.

Thu, 15 Sep 2011 14:20:41 -0500

Stadem, Richard D.

Thu, 15 Sep 2011 14:18:48 -0500

Stadem, Richard D.

Thu, 15 Sep 2011 13:36:42 -0500

Reuven Rokah

Thu, 15 Sep 2011 21:18:43 +0300

Inge Hernefjord

Thu, 15 Sep 2011 19:37:03 +0200

Guy Ramsey

Thu, 15 Sep 2011 13:34:35 -0400

ENIG versus LFHASL

Phil Nutting

Thu, 15 Sep 2011 13:00:32 -0400

Flex Board house

Phil Bavaro

Thu, 29 Sep 2011 10:35:29 -0700

Michael R. Floyd

Thu, 29 Sep 2011 13:01:29 -0400

Steven Kelly

Thu, 29 Sep 2011 12:57:43 -0400

Eric Christison

Thu, 29 Sep 2011 17:54:31 +0100

Phil Bavaro

Thu, 29 Sep 2011 09:53:44 -0700

Thu, 29 Sep 2011 11:34:32 -0400

Michael R. Floyd

Thu, 29 Sep 2011 09:36:31 -0400

Flex Board house

Craig Sullivan

Thu, 29 Sep 2011 08:25:50 -0400

Flux Compatibility

Mike Fenner

Sat, 17 Sep 2011 20:27:17 +0100

Bev Christian

Wed, 14 Sep 2011 20:46:10 -0400

Guy Ramsey

Wed, 14 Sep 2011 14:43:48 -0400

Douglas Pauls

Wed, 14 Sep 2011 11:39:12 -0500

Larry Dzaugis

Wed, 14 Sep 2011 11:23:18 -0500

Cedric ORAIN

Wed, 14 Sep 2011 18:01:29 +0200

Karen Tellefsen

Wed, 14 Sep 2011 09:04:44 -0400

Douglas Pauls

Wed, 14 Sep 2011 07:04:53 -0500

Friday Fun - Help Pick the IPC APEX EXPO Keynote for 2012

Post, Scott E

Wed, 14 Sep 2011 11:51:01 +0000

Flux Compatibility

Cedric ORAIN

Wed, 14 Sep 2011 09:10:02 +0200

Kim Sterling

Fri, 2 Sep 2011 09:51:26 -0500

Gold / Nickel Plating

Noel, William J - GS

Thu, 8 Sep 2011 09:59:34 -0400

Thayer, Wayne - IIW

Wed, 7 Sep 2011 16:39:51 -0400

Steven Creswick

Fri, 2 Sep 2011 14:41:28 -0400

Joyce Koo

Fri, 2 Sep 2011 14:02:44 -0400

Re: High temp Dust covers

Julie Silk

Fri, 2 Sep 2011 12:56:45 -0500

Hesitate to ask

Re: Hesitate to ask

Inge Hernefjord

Thu, 1 Sep 2011 19:36:03 +0200

Re: Hesitate to ask

Whittaker, Dewey (EHCOE)

Thu, 1 Sep 2011 07:48:16 -0700

Re: Hesitate to ask

Blair Hogg

Thu, 1 Sep 2011 07:10:32 -0500

High temp Dust covers

Inge Hernefjord

Thu, 22 Sep 2011 21:19:52 +0200

Re: High temp Dust covers

Reuven Rokah

Thu, 22 Sep 2011 21:52:21 +0300

Re: High temp Dust covers

Inge Hernefjord

Thu, 22 Sep 2011 20:48:56 +0200

High temp Dust covers

Dominic Boudreau

Thu, 22 Sep 2011 14:19:30 -0400

High Temp Flux (450 ) in Wire Solder

Robert Kondner

Tue, 6 Sep 2011 09:40:08 -0400

IMPORTANT Cleaning/Contamination Book

Re: IMPORTANT Cleaning/Contamination Book

Guy Ramsey

Thu, 22 Sep 2011 11:29:34 -0400

Re: IMPORTANT Cleaning/Contamination Book

Brian Ellis

Thu, 22 Sep 2011 17:56:52 +0300

Indirect response to Ioan Tempea RE: [TN] SN100C nickel and germanium depletion

Stadem, Richard D.

Thu, 22 Sep 2011 14:40:46 -0500

Info on China Compulsory Certification for Elect. Equip & Automotive Components

Jack Crawford

Thu, 15 Sep 2011 11:49:34 -0500

Inward Formed L-Shaped Ribbon Leads

Richard D. Krug

Wed, 14 Sep 2011 11:14:23 -0400

IPC spec for Ni and matte tin on component leads?

Re: IPC spec for Ni and matte tin on component leads?

Stadem, Richard D.

Mon, 19 Sep 2011 08:03:30 -0500

Re: IPC spec for Ni and matte tin on component leads?

David D. Hillman

Fri, 16 Sep 2011 12:53:28 -0500

IPC spec for Ni and matte tin on component leads?

Jana Carraway

Fri, 16 Sep 2011 10:05:00 -0700

large parts falling off finished surface mount board assemblies

Re: large parts falling off finished surface mount board assemblies

Whittaker, Dewey (EHCOE)

Mon, 26 Sep 2011 10:26:29 -0700

Re: large parts falling off finished surface mount board assemblies

Stadem, Richard D.

Thu, 22 Sep 2011 07:36:06 -0500

Re: large parts falling off finished surface mount board assemblies

Lum Wee Mei

Thu, 22 Sep 2011 10:07:31 +0800

Re: large parts falling off finished surface mount board assemblies

Inge Hernefjord

Wed, 21 Sep 2011 20:47:16 +0200

Re: large parts falling off finished surface mount board assemblies

Inge Hernefjord

Wed, 21 Sep 2011 19:11:36 +0200

Re: large parts falling off finished surface mount board assemblies

Reuven. ROKAH

Wed, 21 Sep 2011 07:37:16 +0300

Re: large parts falling off finished surface mount board assemblies

Stadem, Richard D.

Tue, 20 Sep 2011 17:05:57 -0500

Re: large parts falling off finished surface mount board assemblies

Robert Kondner

Tue, 20 Sep 2011 17:53:08 -0400

Re: large parts falling off finished surface mount board assemblies

Robert Kondner

Tue, 20 Sep 2011 17:49:53 -0400

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Tue, 20 Sep 2011 21:45:00 +0000

Re: large parts falling off finished surface mount board assemblies

Wenger, George M.

Tue, 20 Sep 2011 15:50:39 -0500

Re: large parts falling off finished surface mount board assemblies

Reuven. ROKAH

Tue, 20 Sep 2011 23:24:37 +0300

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Tue, 20 Sep 2011 13:12:11 -0700

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Tue, 20 Sep 2011 20:11:51 +0000

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Tue, 20 Sep 2011 12:45:01 -0700

Re: large parts falling off finished surface mount board assemblies

Jac Kroeker

Tue, 20 Sep 2011 11:45:25 -0700

Re: large parts falling off finished surface mount board assemblies

Robert Kondner

Tue, 20 Sep 2011 14:12:35 -0400

Re: large parts falling off finished surface mount board assemblies

Reuven Rokah

Tue, 20 Sep 2011 21:01:54 +0300

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Tue, 20 Sep 2011 17:17:27 +0000

Re: large parts falling off finished surface mount board assemblies

Robert Kondner

Tue, 20 Sep 2011 13:02:43 -0400

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Tue, 20 Sep 2011 09:52:31 -0700

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Tue, 20 Sep 2011 09:35:52 -0700

Re: large parts falling off finished surface mount board assemblies

Pete

Tue, 20 Sep 2011 11:23:19 -0500

Re: large parts falling off finished surface mount board assemblies

Leland Woodall

Tue, 20 Sep 2011 15:37:12 +0000

Re: large parts falling off finished surface mount board assemblies

Post, Scott E

Tue, 20 Sep 2011 13:58:54 +0000

Re: large parts falling off finished surface mount board assemblies

Wenger, George M.

Tue, 20 Sep 2011 08:58:05 -0500

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Tue, 20 Sep 2011 06:51:29 -0700

Re: large parts falling off finished surface mount board assemblies

Steve Gregory

Mon, 19 Sep 2011 18:31:59 -0400

Re: large parts falling off finished surface mount board assemblies

Robert Kondner

Mon, 19 Sep 2011 17:59:08 -0400

Re: large parts falling off finished surface mount board assemblies

Stadem, Richard D.

Mon, 19 Sep 2011 16:56:57 -0500

Re: large parts falling off finished surface mount board assemblies

Phil Bavaro

Mon, 19 Sep 2011 14:35:07 -0700

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Mon, 19 Sep 2011 14:32:31 -0700

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Mon, 19 Sep 2011 21:32:26 +0000

Re: large parts falling off finished surface mount board assemblies

Goodyear, Patrick

Mon, 19 Sep 2011 21:28:30 +0000

Re: large parts falling off finished surface mount board assemblies

Wenger, George M.

Mon, 19 Sep 2011 16:21:21 -0500

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Mon, 19 Sep 2011 14:10:17 -0700

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Mon, 19 Sep 2011 21:03:09 +0000

Re: large parts falling off finished surface mount board assemblies

Wenger, George M.

Mon, 19 Sep 2011 15:53:36 -0500

Re: large parts falling off finished surface mount board assemblies

Phil Bavaro

Mon, 19 Sep 2011 13:52:10 -0700

Re: large parts falling off finished surface mount board assemblies

Carl VanWormer

Mon, 19 Sep 2011 13:22:40 -0700

Re: large parts falling off finished surface mount board assemblies

vladimir Igoshev

Mon, 19 Sep 2011 20:10:26 +0000

large parts falling off finished surface mount board assemblies

Carl VanWormer

Mon, 19 Sep 2011 12:48:23 -0700

Laser Depaneling

Re: Laser Depaneling

Brian Chandler

Thu, 15 Sep 2011 06:24:30 -0500

Re: Laser Depaneling

Reuven Rokah

Thu, 15 Sep 2011 09:38:17 +0300

Re: Laser Depaneling

Mickey Weiner

Thu, 15 Sep 2011 08:38:11 +0300

Laser Depaneling

Stephan Schmidt

Wed, 14 Sep 2011 23:06:47 +0000

Lead to hole clearances

Re: Lead to hole clearances

Steve Smith

Fri, 16 Sep 2011 12:34:08 -0400

Lead to hole clearances

Phil Bavaro

Fri, 16 Sep 2011 08:58:44 -0700

Mixing Pb and Pb-free in the same wash tank.

Re: Mixing Pb and Pb-free in the same wash tank.

Rex Waygood

Mon, 12 Sep 2011 17:00:21 +0100

Re: Mixing Pb and Pb-free in the same wash tank.

Stadem, Richard D.

Mon, 12 Sep 2011 10:59:34 -0500

Re: Mixing Pb and Pb-free in the same wash tank.

Stadem, Richard D.

Mon, 12 Sep 2011 10:50:44 -0500

Mixing Pb and Pb-free in the same wash tank.

Charlie Pitarys

Mon, 12 Sep 2011 10:45:36 -0500

Mr X

Goodyear, Patrick

Mon, 26 Sep 2011 20:36:52 +0000

Leland Woodall

Mon, 26 Sep 2011 10:35:13 +0000

Andrzej Zielinski

Fri, 23 Sep 2011 16:45:30 +0000

Victor Hernandez

Fri, 23 Sep 2011 10:12:10 -0500

Richard Hatano

Fri, 23 Sep 2011 07:51:03 -0700

Mumtaz Bora

Fri, 23 Sep 2011 05:52:40 -0700

Jim Carlson

Fri, 23 Sep 2011 07:44:48 -0400

Reuven. ROKAH

Fri, 23 Sep 2011 07:49:48 +0300

Carroll, Thomas A

Thu, 22 Sep 2011 21:40:16 -0500

Tan Geok Ang

Fri, 23 Sep 2011 10:39:06 +0800

ken barton

Thu, 22 Sep 2011 18:23:07 -0700

Fri, 23 Sep 2011 07:52:44 +0800

Inge Hernefjord

Thu, 22 Sep 2011 21:13:30 +0200

Amol Kane

Thu, 22 Sep 2011 14:52:43 -0400

Need for "Alost Though Holes"

Stewart McCracken

Thu, 22 Sep 2011 18:19:52 +0000

Mr X

Inge Hernefjord

Thu, 22 Sep 2011 19:44:37 +0200

Mr. X

Re: Mr. X

Victor Hernandez

Thu, 22 Sep 2011 13:44:48 -0500

Mickey Weiner

Sun, 4 Sep 2011 08:16:01 +0300

Robert Kondner

Fri, 2 Sep 2011 12:31:13 -0400

John Goulet

Fri, 2 Sep 2011 16:23:09 +0000

Need for "Alost Though Holes"

Upton, Shawn

Thu, 1 Sep 2011 20:52:59 +0000

Robert Kondner

Thu, 1 Sep 2011 16:35:58 -0400

Nickel plated connectors and ground bond testing after salt fog

Re: Nickel plated connectors and ground bond testing after salt fog

Inge Hernefjord

Fri, 16 Sep 2011 08:06:08 +0200

Nickel plated connectors and ground bond testing after salt fog

Temkin, Gregg

Thu, 15 Sep 2011 22:19:20 +0000

Joyce Koo

Sat, 24 Sep 2011 06:10:48 -0400

Giamis, Andy

Fri, 23 Sep 2011 21:56:16 -0500

David D. Hillman

Fri, 23 Sep 2011 18:39:30 -0500

Wenger, George M.

Fri, 23 Sep 2011 18:12:36 -0500

David D. Hillman

Fri, 23 Sep 2011 17:25:45 -0500

David D. Hillman

Sun, 18 Sep 2011 20:38:42 -0500

David D. Hillman

Fri, 9 Sep 2011 13:16:55 -0500

Bev Christian

Thu, 1 Sep 2011 19:44:28 -0400

Goodyear, Patrick

Thu, 1 Sep 2011 21:37:45 +0000

Douglas Pauls

Thu, 1 Sep 2011 16:12:41 -0500

David D. Hillman

Thu, 1 Sep 2011 16:06:42 -0500

Blair Hogg

Fri, 23 Sep 2011 15:07:16 -0500

Chuck Brummer

Fri, 23 Sep 2011 09:35:08 -0700

Joe Russeau

Fri, 23 Sep 2011 09:39:12 -0400

Robert Wolfe

Fri, 23 Sep 2011 09:35:08 -0400

Graham Naisbitt

Fri, 23 Sep 2011 14:17:34 +0100

Giamis, Andy

Fri, 23 Sep 2011 07:24:06 -0500

David D. Hillman

Fri, 23 Sep 2011 07:16:42 -0500

Mike Fenner

Sun, 18 Sep 2011 22:49:49 +0100

Bev Christian

Sat, 17 Sep 2011 16:23:03 -0400

Mickey Weiner

Sat, 17 Sep 2011 22:58:43 +0300

Steve Mikell

Sat, 17 Sep 2011 13:55:15 -0400

Graham Collins

Fri, 16 Sep 2011 13:47:14 -0300

Ian Hanna

Fri, 16 Sep 2011 12:43:21 -0400

David D. Hillman

Fri, 16 Sep 2011 11:39:42 -0500

Steve Mikell

Thu, 8 Sep 2011 18:24:27 -0400

Stadem, Richard D.

Thu, 8 Sep 2011 17:19:16 -0500

David D. Hillman

Thu, 8 Sep 2011 17:02:52 -0500

Anil kher

Fri, 2 Sep 2011 01:19:25 +0530

Douglas Pauls

Thu, 1 Sep 2011 07:15:55 -0500

NTC Re: [TN] NTC Friday Element Quiz - the Answer

Blair Hogg

Thu, 1 Sep 2011 07:07:44 -0500

David D. Hillman

Thu, 1 Sep 2011 16:24:44 -0500

NTC RE: [TN] Pneumatic Syringes and ESD

Phil Bavaro

Wed, 14 Sep 2011 12:31:03 -0700

NTC you had to see it coming

Re: NTC you had to see it coming

Phil Bavaro

Wed, 14 Sep 2011 12:37:55 -0700

Re: NTC you had to see it coming

Whittaker, Dewey (EHCOE)

Wed, 14 Sep 2011 12:36:18 -0700

NTC [TN] ENIG versus LFHASL

Re: NTC [TN] ENIG versus LFHASL

Inge Hernefjord

Thu, 15 Sep 2011 22:35:54 +0200

Re: NTC [TN] ENIG versus LFHASL

Stadem, Richard D.

Thu, 15 Sep 2011 14:52:59 -0500

NTC [TN] Pneumatic Syringes and ESD

Joyce Koo

Wed, 14 Sep 2011 18:36:44 -0400

Whittaker, Dewey (EHCOE)

Wed, 14 Sep 2011 15:01:20 -0700

Stadem, Richard D.

Wed, 14 Sep 2011 15:29:23 -0500

Gregg Owens

Wed, 14 Sep 2011 13:11:50 -0700

Joyce Koo

Wed, 14 Sep 2011 15:47:59 -0400

Stadem, Richard D.

Wed, 14 Sep 2011 14:30:28 -0500

NTC: playing with words

Steve Gregory

Thu, 15 Sep 2011 17:54:23 -0400

Reuven Rokah

Thu, 15 Sep 2011 18:18:00 +0300

Steve Gregory

Thu, 15 Sep 2011 10:31:53 -0400

NTC: Re: [TN] Solder Data Question

Phil Bavaro

Wed, 14 Sep 2011 14:27:36 -0700

NTC: playing with words

Inge Hernefjord

Wed, 14 Sep 2011 23:19:59 +0200

Re: NTC: Re: [TN] Solder Data Question

Fox, Ian

Thu, 1 Sep 2011 15:16:12 +0100

NTC: Re: [TN] Solder Data Question

David D. Hillman

Thu, 1 Sep 2011 07:39:01 -0500

OT RE: [TN] DFM Guidelines v/s IPC Guidelines

Joyce Koo

Thu, 29 Sep 2011 13:54:35 -0400

Robert Kondner

Thu, 29 Sep 2011 13:12:11 -0400

Larry Dzaugis

Thu, 29 Sep 2011 11:55:07 -0500

Phil Nutting

Thu, 29 Sep 2011 12:52:05 -0400

Douglas Pauls

Thu, 29 Sep 2011 11:45:35 -0500

Stadem, Richard D.

Thu, 29 Sep 2011 11:26:30 -0500

Stadem, Richard D.

Thu, 29 Sep 2011 11:24:30 -0500

Douglas Pauls

Thu, 29 Sep 2011 11:13:36 -0500

Robert Kondner

Thu, 29 Sep 2011 11:53:11 -0400

OT RE: [TN] DFM Guidelines v/s IPC Guidelines

Douglas Pauls

Thu, 29 Sep 2011 10:37:08 -0500

Robert Kondner

Thu, 29 Sep 2011 11:23:19 -0400

Pad repair

Inge Hernefjord

Tue, 13 Sep 2011 08:25:07 +0200

Stadem, Richard D.

Thu, 8 Sep 2011 16:40:02 -0500

Andrzej Zielinski

Thu, 8 Sep 2011 21:19:43 +0000

Sue Powers-Hartman

Thu, 8 Sep 2011 15:50:28 -0500

Pneumatic Syringes and ESD

Robert Kondner

Thu, 8 Sep 2011 16:43:12 -0400

Pad repair

Sue Powers-Hartman

Thu, 8 Sep 2011 15:39:07 -0500

PCB Finishes

Frank Kimmey

Wed, 14 Sep 2011 18:12:33 -0700

Plasma experts

Douglas Pauls

Fri, 23 Sep 2011 10:54:26 -0500

Inge Hernefjord

Wed, 14 Sep 2011 23:07:39 +0200

Whittaker, Dewey (EHCOE)

Wed, 14 Sep 2011 12:06:52 -0700

Stadem, Richard D.

Wed, 14 Sep 2011 13:58:40 -0500

Inge Hernefjord

Wed, 14 Sep 2011 19:50:30 +0200

Phil Bavaro

Wed, 14 Sep 2011 10:39:32 -0700

Stadem, Richard D.

Wed, 14 Sep 2011 10:52:38 -0500

Drew meyer

Wed, 14 Sep 2011 10:15:25 -0500

Douglas Pauls

Wed, 14 Sep 2011 09:46:49 -0500

Stadem, Richard D.

Wed, 14 Sep 2011 08:15:03 -0500

Steven Creswick

Wed, 14 Sep 2011 07:33:18 -0400

Inge Hernefjord

Wed, 14 Sep 2011 12:33:12 +0200

Douglas Pauls

Tue, 13 Sep 2011 13:06:54 -0500

Mike Fenner

Tue, 13 Sep 2011 18:48:43 +0100

Gene Felder

Tue, 13 Sep 2011 10:46:24 -0700

Joyce Koo

Tue, 13 Sep 2011 13:28:16 -0400

Brian Stumm

Tue, 13 Sep 2011 10:22:50 -0700

Whittaker, Dewey (EHCOE)

Tue, 13 Sep 2011 10:11:25 -0700

Douglas Pauls

Tue, 13 Sep 2011 11:32:33 -0500

Stadem, Richard D.

Tue, 13 Sep 2011 11:19:04 -0500

Pneumatic Syringes and ESD

Brian Stumm

Tue, 13 Sep 2011 09:13:27 -0700

Douglas Pauls

Tue, 13 Sep 2011 10:53:06 -0500

QFN with solder slug

Pete

Thu, 8 Sep 2011 08:47:55 -0500

David D. Hillman

Wed, 7 Sep 2011 16:21:01 -0500

Thayer, Wayne - IIW

Wed, 7 Sep 2011 16:48:35 -0400

Robert Kondner

Fri, 2 Sep 2011 16:10:25 -0400

Jim Carlson

Fri, 2 Sep 2011 14:00:19 -0400

Julie Silk

Fri, 2 Sep 2011 12:47:46 -0500

David D. Hillman

Thu, 1 Sep 2011 10:42:45 -0500

Karen Tellefsen

Thu, 1 Sep 2011 11:30:06 -0400

Whittaker, Dewey (EHCOE)

Thu, 1 Sep 2011 07:28:34 -0700

David D. Hillman

Thu, 1 Sep 2011 07:05:08 -0500

David D. Hillman

Thu, 1 Sep 2011 06:55:06 -0500

Marsico, James - ES

Thu, 1 Sep 2011 07:55:19 -0400

Reuven Rokah

Thu, 1 Sep 2011 10:12:26 +0300

QFN with solder slug - plating vias shut

Rex Waygood

Thu, 1 Sep 2011 07:57:11 +0100

Re: QFN with solder slug - plating vias shut

David D. Hillman

Thu, 1 Sep 2011 07:18:47 -0500

Re: QFN with solder slug - plating vias shut

Marsico, James - ES

Thu, 1 Sep 2011 08:00:31 -0400

R: [TN] Dry Cabinets

SALA GABRIELE

Wed, 14 Sep 2011 10:54:28 +0200

R: [TN] Mr X

Re: R: [TN] Mr X

Inge Hernefjord

Sat, 24 Sep 2011 00:44:36 +0200

R: [TN] Mr X

SALA GABRIELE

Fri, 23 Sep 2011 23:59:09 +0200

R: [TN] R: [TN] standard industry silkscreened symbology for Pb-free assembly

SALA GABRIELE

Fri, 16 Sep 2011 15:10:18 +0200

R: [TN] R: [TN] standard industry silkscreened symbology for Pb-free assembly

SALA GABRIELE

Fri, 16 Sep 2011 15:02:49 +0200

R: [TN] standard industry silkscreened symbology for Pb-free assembly

SALA GABRIELE

Sun, 18 Sep 2011 21:00:19 +0200

Re: R: [TN] standard industry silkscreened symbology for Pb-free assembly

Jack Olson

Sun, 18 Sep 2011 10:22:53 -0500

Re: R: [TN] standard industry silkscreened symbology for Pb-free assembly

Victor Hernandez

Fri, 16 Sep 2011 07:54:01 -0500

R: [TN] standard industry silkscreened symbology for Pb-free assembly

SALA GABRIELE

Fri, 16 Sep 2011 14:51:09 +0200

Roll to roll production

Mumtaz Bora

Mon, 26 Sep 2011 08:52:08 -0700

Sherif Refaat

Mon, 26 Sep 2011 10:43:45 -0400

Malin Thomsen

Mon, 26 Sep 2011 15:33:42 +0200

Brian Ellis

Mon, 26 Sep 2011 16:28:38 +0300

Brian Ellis

Mon, 26 Sep 2011 16:30:39 +0300

Roll to roll production

Malin Thomsen

Mon, 26 Sep 2011 14:50:19 +0200

Small router

Joyce Koo

Thu, 22 Sep 2011 20:24:02 -0400

Stephan Schmidt

Thu, 22 Sep 2011 23:23:49 +0000

Joyce Koo

Tue, 13 Sep 2011 05:07:13 -0400

Shabtay Shalev

Tue, 13 Sep 2011 08:51:48 +0300

Joyce Koo

Mon, 12 Sep 2011 21:34:54 -0400

Robert Kondner

Mon, 12 Sep 2011 21:28:51 -0400

Small router

Joyce Koo

Mon, 12 Sep 2011 21:02:23 -0400

Sn100C

Rex Waygood

Wed, 14 Sep 2011 11:46:54 +0100

Cedric ORAIN

Wed, 14 Sep 2011 12:03:40 +0200

Cedric ORAIN

Wed, 14 Sep 2011 10:20:47 +0200

Rex Waygood

Wed, 14 Sep 2011 09:20:38 +0100

SN100C nickel and germanium depletion

Eric Christison

Wed, 14 Sep 2011 09:07:08 +0100

Sn100C

Cedric ORAIN

Wed, 14 Sep 2011 09:20:05 +0200

Steven Creswick

Thu, 22 Sep 2011 15:21:14 -0400

Victor Hernandez

Thu, 22 Sep 2011 13:53:55 -0500

David D. Hillman

Thu, 22 Sep 2011 10:55:35 -0500

Rex Waygood

Thu, 22 Sep 2011 16:01:06 +0100

Howard Stevens

Thu, 22 Sep 2011 10:34:39 -0400

Victor Hernandez

Thu, 22 Sep 2011 09:35:07 -0500

Stadem, Richard D.

Thu, 22 Sep 2011 09:26:22 -0500

SN100C nickel and germanium depletion

Ioan Tempea

Thu, 22 Sep 2011 10:14:36 -0400

Howard Stevens

Thu, 22 Sep 2011 08:50:24 -0500

SOLD OUT Cleaning/Contamination Book

Re: SOLD OUT Cleaning/Contamination Book

Brian Ellis

Fri, 23 Sep 2011 17:20:04 +0300

Solder bath purity testing questions

Mike Fenner

Wed, 7 Sep 2011 08:58:32 +0100

Carroll, Thomas A

Tue, 6 Sep 2011 21:01:48 -0500

Bev Christian

Tue, 6 Sep 2011 21:47:12 -0400

Solder bath purity testing questions

vladimir Igoshev

Wed, 7 Sep 2011 00:49:16 +0000

Phil Bavaro

Tue, 6 Sep 2011 16:10:30 -0700

Solder Data Question

Re: Solder Data Question

Mike Fenner

Thu, 1 Sep 2011 16:09:41 +0100

Re: Solder Data Question

Douglas Pauls

Thu, 1 Sep 2011 07:31:01 -0500

Re: Solder Data Question

David D. Hillman

Thu, 1 Sep 2011 07:13:12 -0500

Solder Paste Shelf Life Extension

Ahne Oosterhof

Wed, 28 Sep 2011 15:56:24 -0700

Reuven. ROKAH

Wed, 28 Sep 2011 23:30:49 +0300

Leland Woodall

Wed, 28 Sep 2011 18:12:17 +0000

Leland Woodall

Wed, 28 Sep 2011 18:08:54 +0000

ken barton

Wed, 28 Sep 2011 10:18:50 -0700

Stadem, Richard D.

Wed, 28 Sep 2011 12:15:17 -0500

Steve Mikell

Wed, 28 Sep 2011 12:52:43 -0400

Mike Fenner

Wed, 28 Sep 2011 16:33:58 +0100

Stadem, Richard D.

Wed, 28 Sep 2011 10:07:08 -0500

Mike Fenner

Wed, 28 Sep 2011 15:20:24 +0100

Stadem, Richard D.

Tue, 27 Sep 2011 15:31:34 -0500

Reuven. ROKAH

Tue, 27 Sep 2011 22:43:30 +0300

Guy Ramsey

Tue, 27 Sep 2011 15:11:03 -0400

Stadem, Richard D.

Tue, 27 Sep 2011 13:59:56 -0500

Leland Woodall

Tue, 27 Sep 2011 18:16:33 +0000

Whittaker, Dewey (EHCOE)

Tue, 27 Sep 2011 11:15:12 -0700

Amol Kane

Tue, 27 Sep 2011 12:51:10 -0400

Phil Bavaro

Tue, 27 Sep 2011 09:38:20 -0700

Solder Paste Shelf Life Extension

Whittaker, Dewey (EHCOE)

Tue, 27 Sep 2011 09:31:45 -0700

Leland Woodall

Tue, 27 Sep 2011 15:41:37 +0000

Soldering to tungsten wire

Mike Fenner

Fri, 2 Sep 2011 07:42:41 +0100

Inge Hernefjord

Fri, 2 Sep 2011 07:04:27 +0200

Robert Kondner

Thu, 1 Sep 2011 17:27:58 -0400

David D. Hillman

Thu, 1 Sep 2011 16:14:59 -0500

Goodyear, Patrick

Thu, 1 Sep 2011 21:03:41 +0000

Soldering to tungsten wire

Woolley, Mark D. (Mark)

Thu, 1 Sep 2011 14:49:27 -0600

Stadem, Richard D.

Thu, 1 Sep 2011 15:45:17 -0500

Soldermask coverage

James Layer

Thu, 29 Sep 2011 16:47:32 -0400

Spray fluxer for wave machines

John Goulet

Tue, 6 Sep 2011 20:26:22 +0000

Stadem, Richard D.

Tue, 6 Sep 2011 13:19:33 -0500

Guy Ramsey

Tue, 6 Sep 2011 13:28:52 -0400

Steve Gregory

Tue, 6 Sep 2011 10:28:32 -0400

Larry Dzaugis

Tue, 6 Sep 2011 09:00:57 -0500

Spray fluxer for wave machines

Ioan Tempea

Tue, 6 Sep 2011 09:05:09 -0400

Ioan Tempea

Thu, 1 Sep 2011 09:31:22 -0400

standard industry silkscreened symbology for Pb-free assembly

Re: standard industry silkscreened symbology for Pb-free assembly

Ahne Oosterhof

Mon, 26 Sep 2011 09:35:30 -0700

Re: standard industry silkscreened symbology for Pb-free assembly

Jack Olson

Sun, 18 Sep 2011 10:19:54 -0500

standard industry silkscreened symbology for Pb-free assembly

Kim Sterling

Fri, 16 Sep 2011 08:52:53 -0500

Re: standard industry silkscreened symbology for Pb-free assembly

Dennis Fritz

Fri, 16 Sep 2011 08:53:14 -0400

Re: standard industry silkscreened symbology for Pb-free assembly

Upton, Shawn

Fri, 16 Sep 2011 12:39:23 +0000

Re: standard industry silkscreened symbology for Pb-free assembly

Lenny at ERG

Fri, 16 Sep 2011 08:32:31 -0400

standard industry silkscreened symbology for Pb-free assembly

Joe Macko

Thu, 15 Sep 2011 13:46:48 -0700

Steven Creswick

Sun, 11 Sep 2011 06:02:12 -0400

Robert Kondner

Fri, 9 Sep 2011 15:14:02 -0400

TechNet Digest - 30 Aug 2011 to 31 Aug 2011 (#2011-228)

Re: TechNet Digest - 30 Aug 2011 to 31 Aug 2011 (#2011-228)

Kathy Jenczewski

Fri, 2 Sep 2011 09:54:14 -0400

tiny cracks in solder

Re: tiny cracks in solder

Victor Hernandez

Sat, 24 Sep 2011 06:28:53 -0500

Re: tiny cracks in solder

Inge Hernefjord

Sat, 24 Sep 2011 02:36:02 +0200

Re: tiny cracks in solder

vladimir Igoshev

Sat, 24 Sep 2011 00:39:48 +0000

tiny cracks in solder

[log in to unmask]

Fri, 23 Sep 2011 16:56:30 -0700

Triboelectric charges very useful list

Re: Triboelectric charges very useful list

Phil Bavaro

Wed, 14 Sep 2011 11:09:04 -0700

Re: Triboelectric charges very useful list

Inge Hernefjord

Wed, 14 Sep 2011 19:16:40 +0200

Using pressurized air to dry stencils

Steve Gregory

Fri, 30 Sep 2011 17:34:17 -0400

Larry Dzaugis

Fri, 30 Sep 2011 16:22:07 -0500

Amol Kane

Fri, 30 Sep 2011 08:04:47 -0400

Tan Geok Ang

Fri, 30 Sep 2011 15:37:10 +0800