LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Victor Hernandez

Fri, 5 Dec 2008 15:25:02 -0600

John Goulet

Sun, 7 Dec 2008 14:40:37 +0000

Werner Engelmaier /*

Fri, 5 Dec 2008 16:37:01 EST

Victor Hernandez

Mon, 8 Dec 2008 08:32:51 -0600

Stadem, Richard D.

Mon, 8 Dec 2008 08:41:48 -0600

Victor Hernandez

Mon, 8 Dec 2008 08:50:45 -0600

A New Year's Resolution...

Werner engelmaier

Mon, 8 Dec 2008 18:28:19 -0500

Joe Fjelstad

Wed, 31 Dec 2008 13:10:29 EST

Alumina Substrate

McGlaughlin, Jeffrey A

Mon, 1 Dec 2008 08:56:45 -0500

Ted Tontis

Mon, 1 Dec 2008 08:47:39 -0600

Steve Gregory

Mon, 1 Dec 2008 08:51:18 -0600

Creswick, Steven

Mon, 1 Dec 2008 09:53:08 -0500

Hernefjord Ingemar

Mon, 1 Dec 2008 15:53:43 +0100

Hernefjord Ingemar

Mon, 1 Dec 2008 15:57:48 +0100

Creswick, Steven

Mon, 1 Dec 2008 09:59:01 -0500

Hernefjord Ingemar

Mon, 1 Dec 2008 16:19:15 +0100

Hernefjord Ingemar

Mon, 1 Dec 2008 16:19:49 +0100

McGlaughlin, Jeffrey A

Mon, 1 Dec 2008 10:54:15 -0500

Creswick, Steven

Mon, 1 Dec 2008 12:21:33 -0500

Thayer, Wayne

Mon, 1 Dec 2008 12:26:26 -0500

Joyce Koo

Mon, 1 Dec 2008 13:39:44 -0500

Stadem, Richard D.

Mon, 1 Dec 2008 12:52:58 -0600

AW: [TN] AW: [TN] vibration testing of tin-lead and lead-free solder joints

Inge

Mon, 1 Dec 2008 13:49:05 -0800

Jeremias, Michael

Mon, 22 Dec 2008 15:16:04 +0100

AW: [TN] vibration testing of tin-lead and lead-free solder joints

Jeremias, Michael

Fri, 19 Dec 2008 12:20:08 +0100

AW: [TN] vibration testing of tin-lead and lead-free solder joints

Jeremias, Michael

Fri, 19 Dec 2008 19:03:08 +0100

Re: AW: [TN] vibration testing of tin-lead and lead-free solder joints

Joyce Koo

Fri, 19 Dec 2008 16:14:48 -0500

axial lead bend

Jack Olson

Thu, 18 Dec 2008 14:13:37 -0600

Graham Collins

Thu, 18 Dec 2008 16:21:52 -0400

Werner engelmaier

Thu, 18 Dec 2008 15:28:23 -0500

Stadem, Richard D.

Thu, 18 Dec 2008 14:29:38 -0600

Steve Gregory

Thu, 18 Dec 2008 14:36:27 -0600

Stadem, Richard D.

Thu, 18 Dec 2008 14:37:10 -0600

Wilson, Bob

Thu, 18 Dec 2008 13:25:49 -0800

Wilson, Bob

Thu, 18 Dec 2008 13:27:55 -0800

Wilson, Bob

Thu, 18 Dec 2008 13:31:37 -0800

Jack Olson

Fri, 19 Dec 2008 14:29:08 -0600

Bernard Madoff NTC

Joe Fjelstad

Sat, 20 Dec 2008 15:20:31 EST

BGA soldering open issue

Cong He

Fri, 5 Dec 2008 10:08:37 +0800

Wenger, George M.

Thu, 4 Dec 2008 21:57:25 -0500

Paul Edwards

Thu, 4 Dec 2008 19:07:33 -0800

David D. Hillman

Fri, 5 Dec 2008 07:31:18 -0600

John Goulet

Sun, 7 Dec 2008 15:09:34 +0000

Cong He

Tue, 9 Dec 2008 17:18:12 +0800

Board House recommendation

Werner engelmaier

Tue, 9 Dec 2008 18:04:51 -0500

Jerry Dengler

Tue, 2 Dec 2008 08:44:07 -0500

Re: Board House recommendation

Donald Vischulis

Tue, 2 Dec 2008 17:10:51 -0600

Cold Forged Alunium (CFA), Cross section-grain structure

Victor Hernandez

Fri, 12 Dec 2008 12:49:43 -0600

Re: Cold Forged Alunium (CFA), Cross section-grain structure

David D. Hillman

Fri, 12 Dec 2008 13:23:02 -0600

Re: Cold Forged Alunium (CFA), Cross section-grain structure

Victor Hernandez

Fri, 12 Dec 2008 14:10:20 -0600

Compliant Pin Insertion Machines

Brian Chandler

Fri, 12 Dec 2008 14:28:44 -0600

Re: Compliant Pin Insertion Machines

John Goulet

Sun, 28 Dec 2008 22:47:28 +0000

Conductive Epoxy filled Vias

Dave Connitt

Tue, 2 Dec 2008 09:07:27 -0500

Joyce Koo

Tue, 2 Dec 2008 09:16:18 -0500

Phil Nutting

Tue, 2 Dec 2008 09:31:48 -0500

Dave Connitt

Tue, 2 Dec 2008 09:55:35 -0500

Dave Connitt

Tue, 2 Dec 2008 10:01:25 -0500

Werner engelmaier

Tue, 2 Dec 2008 10:38:10 -0500

Haynes, Kim

Tue, 2 Dec 2008 09:56:39 -0600

Thayer, Wayne

Tue, 2 Dec 2008 14:05:44 -0500

Pete Houwen

Wed, 3 Dec 2008 07:57:46 -0600

Paul Reid

Wed, 3 Dec 2008 11:25:15 -0500

Whittaker, Dewey (EHCOE)

Wed, 3 Dec 2008 10:30:52 -0700

Conformal Coat and Eddy Currents

Paul Reid

Wed, 3 Dec 2008 13:20:43 -0500

Douglas O. Pauls

Thu, 4 Dec 2008 13:18:39 -0600

Ted Tontis

Thu, 4 Dec 2008 13:27:41 -0600

Whittaker, Dewey (EHCOE)

Thu, 4 Dec 2008 12:45:23 -0700

Stadem, Richard D.

Thu, 4 Dec 2008 13:48:16 -0600

Ian Hanna

Thu, 4 Dec 2008 14:59:20 -0500

Lee Whiteman

Thu, 4 Dec 2008 14:58:35 -0500

Douglas O. Pauls

Thu, 4 Dec 2008 13:59:57 -0600

John Goulet

Sun, 7 Dec 2008 15:28:32 +0000

Graham Naisbitt

Sun, 7 Dec 2008 19:20:41 +0000

Joyce Koo

Sun, 7 Dec 2008 14:27:03 -0500

Whittaker, Dewey (EHCOE)

Tue, 9 Dec 2008 06:59:18 -0700

John Burke

Tue, 9 Dec 2008 09:37:57 -0800

Re: Fwd: Draft for IPC-4101C

Whittaker, Dewey (EHCOE)

Tue, 9 Dec 2008 13:20:50 -0700

DC IN connector plating

Victor Hernandez

Tue, 2 Dec 2008 09:11:15 -0600

Draft for IPC-4101C

Werner Engelmaier /*

Mon, 1 Dec 2008 18:33:43 EST

Fwd: Draft for IPC-4101C

Werner engelmaier

Wed, 3 Dec 2008 18:11:05 -0500

Grunde Gjertsen

Thu, 4 Dec 2008 07:45:07 +0100

Re: Fwd: Draft for IPC-4101C

Werner engelmaier

Thu, 4 Dec 2008 07:33:18 -0500

ENIG thickness measurement

Louis Hart

Fri, 5 Dec 2008 11:14:41 -0500

Re: ENIG thickness measurement

Wenger, George M.

Fri, 5 Dec 2008 11:30:04 -0500

flux and board cleaning issues

Wilson, Bob

Tue, 16 Dec 2008 15:55:02 -0800

R Sedlak

Tue, 16 Dec 2008 16:04:18 -0800

Wilson, Bob

Tue, 16 Dec 2008 16:12:19 -0800

Guy Ramsey

Tue, 16 Dec 2008 22:48:03 -0500

Brian Ellis

Wed, 17 Dec 2008 10:12:03 +0200

Lee Whiteman

Wed, 17 Dec 2008 08:15:15 -0500

Phil Nutting

Wed, 17 Dec 2008 08:41:46 -0500

Dale Ritzen

Wed, 17 Dec 2008 07:43:46 -0600

Kevin Glidden

Wed, 17 Dec 2008 09:16:54 -0500

N Burtt

Wed, 17 Dec 2008 08:41:39 -0600

Robert Kondner

Wed, 17 Dec 2008 11:03:57 -0500

Paul Edwards

Wed, 17 Dec 2008 09:32:32 -0800

Guy Ramsey

Wed, 17 Dec 2008 11:47:51 -0500

R Sedlak

Wed, 17 Dec 2008 09:20:46 -0800

Terry L. Munson

Wed, 17 Dec 2008 20:28:03 -0500

Andy Ng

Wed, 17 Dec 2008 18:09:00 -0800

Paul Edwards

Wed, 17 Dec 2008 18:32:32 -0800

Brian Ellis

Thu, 18 Dec 2008 10:54:39 +0200

Douglas Pauls

Thu, 18 Dec 2008 07:34:27 -0600

Douglas Pauls

Thu, 18 Dec 2008 07:46:59 -0600

Stadem, Richard D.

Thu, 18 Dec 2008 08:10:06 -0600

Robert Kondner

Thu, 18 Dec 2008 10:01:22 -0500

Robert Kondner

Thu, 18 Dec 2008 10:05:56 -0500

Thu, 18 Dec 2008 11:17:15 EST

R Sedlak

Thu, 18 Dec 2008 08:30:09 -0800

Ted Stern

Thu, 18 Dec 2008 11:00:59 -0600

Paul Edwards

Thu, 18 Dec 2008 10:18:28 -0800

Paul Edwards

Thu, 18 Dec 2008 10:53:38 -0800

Holiday Eating Guide

Ken Bloomquist

Wed, 24 Dec 2008 07:26:59 -0800

Re: Holiday Eating Guide

Joyce Koo

Wed, 24 Dec 2008 10:47:54 -0500

Re: Holiday Eating Guide

Syed Ahmad

Wed, 24 Dec 2008 10:20:51 -0600

Immersion Tin

James Mahoney

Wed, 3 Dec 2008 09:24:46 -0500

Wed, 3 Dec 2008 10:07:17 -0500

James Mahoney

Wed, 3 Dec 2008 10:34:29 -0500

Wed, 3 Dec 2008 11:02:23 EST

IPC-6012 Class 3 - Electrical Test Requirement

James Mahoney

Wed, 3 Dec 2008 11:05:26 -0500

roland jaquet

Sat, 13 Dec 2008 14:56:14 +0100

Re: IPC-6012 Class 3 - Electrical Test Requirement

Rex Waygood

Mon, 15 Dec 2008 09:24:02 -0000

IPC/JEDEC Upcoming Lead-Free Event - 03/3-5/2009 Santa Clara, Calf.

Michelle Michelotti

Mon, 22 Dec 2008 10:27:52 -0600

Last chance to register for IPC/JEDEC's Lead Free Conference December 8-10, 2008

Michelle Michelotti

Mon, 1 Dec 2008 14:33:26 -0600

Lead free soldering

David Tremmel

Thu, 4 Dec 2008 15:57:47 -0600

Re: Lead free soldering

Werner engelmaier

Thu, 4 Dec 2008 18:31:46 -0500

Re: Lead free soldering

John Goulet

Sun, 7 Dec 2008 15:16:57 +0000

Materials

Whittaker, Dewey (EHCOE)

Thu, 4 Dec 2008 10:04:58 -0700

Multilayer construction

SAHLI habib

Mon, 22 Dec 2008 15:40:26 +0100

Stewart, Dougal

Mon, 22 Dec 2008 14:42:56 -0000

James Mahoney

Mon, 22 Dec 2008 09:49:05 -0500

Chuck Brummer

Mon, 22 Dec 2008 08:05:40 -0800

NTC Re: [TN] Underfill, inhibition due to leftover activators in the flux residue

SAHLI habib

Mon, 22 Dec 2008 16:29:11 +0100

My apologies

Kim Sterling

Wed, 3 Dec 2008 14:32:28 -0600

Re: My apologies

Joe Fjelstad

Wed, 3 Dec 2008 15:34:04 EST

Re: My apologies

Whittaker, Dewey (EHCOE)

Wed, 3 Dec 2008 13:40:19 -0700

Re: My apologies

Barbara Burcham

Wed, 3 Dec 2008 14:45:16 -0600

nickel erosion

Re: nickel erosion

Pete Houwen

Mon, 1 Dec 2008 08:29:19 -0600

NORAD

Randall L Bock

Wed, 24 Dec 2008 09:31:52 -0500

Re: NORAD

John Burke

Wed, 24 Dec 2008 09:41:12 -0800

NTC Christmas Greetings

Steve Gregory

Fri, 19 Dec 2008 08:29:06 -0600

NTC Engineers!

Brian Ellis

Tue, 30 Dec 2008 17:04:27 +0200

Re: NTC Engineers!

Syed Ahmad

Tue, 30 Dec 2008 09:43:41 -0600

Re: NTC Engineers!

Dwight Mattix

Tue, 30 Dec 2008 07:51:01 -0800

Bev Christian

Mon, 22 Dec 2008 21:04:44 -0500

NTC [TN] Alumina Substrate

John Burke

Mon, 1 Dec 2008 17:15:06 -0800

Hernefjord Ingemar

Tue, 2 Dec 2008 14:43:03 +0100

Whittaker, Dewey (EHCOE)

Wed, 3 Dec 2008 14:07:24 -0700

Joe Fjelstad

Wed, 3 Dec 2008 16:25:11 EST

Nick Ban

Wed, 3 Dec 2008 15:27:54 -0600

Whittaker, Dewey (EHCOE)

Wed, 3 Dec 2008 14:31:49 -0700

Nick Ban

Wed, 3 Dec 2008 15:40:13 -0600

John Burke

Wed, 3 Dec 2008 15:12:52 -0800

Werner engelmaier

Wed, 3 Dec 2008 18:44:30 -0500

NTC [TN] Stripping Magnet Wire

Nick Ban

Wed, 3 Dec 2008 22:44:45 -0600

NTC [TN] Materials

Re: NTC [TN] Materials

John Burke

Thu, 4 Dec 2008 09:37:52 -0800

Re: NTC [TN] Materials

Douglas O. Pauls

Thu, 4 Dec 2008 13:15:49 -0600

Re: NTC [TN] Stripping Magnet Wire

John Burke

Wed, 3 Dec 2008 12:37:16 -0800

NTC [TN] Way off-topic: CrO2 cassette tape

Re: NTC [TN] Way off-topic: CrO2 cassette tape

John Burke

Thu, 18 Dec 2008 11:39:14 -0800

Re: NTC [TN] Way off-topic: CrO2 cassette tape

Michael Kirschner

Sun, 21 Dec 2008 14:08:38 -0600

OT Friday newsflash

Brian Ellis

Fri, 5 Dec 2008 10:18:52 +0200

Re: OT Friday newsflash

kwood716

Fri, 5 Dec 2008 07:07:56 -0500

Re: OT Friday newsflash

Randall L Bock

Fri, 5 Dec 2008 07:29:56 -0500

Re: OT Friday newsflash

Ahne Oosterhof

Fri, 5 Dec 2008 09:23:11 -0800

Plated Copper Dissolution at the Knee/Lead Free Soldering

Kim O'Neil

Mon, 15 Dec 2008 16:24:14 -0700

Re: Plated Copper Dissolution at the Knee/Lead Free Soldering

stephengregory5849

Mon, 15 Dec 2008 17:45:57 -0600

Re: Plated Copper Dissolution at the Knee/Lead Free Soldering

Bobwillis

Thu, 18 Dec 2008 19:22:31 -0500

POP underfill?

Phillip Bavaro

Wed, 10 Dec 2008 11:04:07 -0800

Mike Fenner

Thu, 11 Dec 2008 10:41:52 -0000

Joyce Koo

Thu, 11 Dec 2008 07:49:42 -0500

Phillip Bavaro

Fri, 12 Dec 2008 13:44:12 -0800

Gumpert, Ben

Mon, 15 Dec 2008 06:54:20 -0500

QUESTION ON GULL WING COMPONENT LEAD CONFIGURATION ANOMALY

Bobwillis

Thu, 18 Dec 2008 19:22:27 -0500

Roberts, Jon

Wed, 10 Dec 2008 12:48:32 -0600

Re: QUESTION ON GULL WING COMPONENT LEAD CONFIGURATION ANOMALY

Whittaker, Dewey (EHCOE)

Wed, 10 Dec 2008 11:52:15 -0700

RF PCB for high frequency

Anat Douek

Sun, 28 Dec 2008 15:30:27 +0200

Re: RF PCB for high frequency

Inge

Sun, 28 Dec 2008 08:52:56 -0800

Re: RF PCB for high frequency

Joetech82

Mon, 29 Dec 2008 08:56:22 -0800

SCreswick@Gentex Signing Off

Steve Creswick

Fri, 12 Dec 2008 05:41:07 -0500

Re: SCreswick@Gentex Signing Off

Randall L Bock

Fri, 12 Dec 2008 06:42:18 -0500

Re: SCreswick@Gentex Signing Off

Steve Gregory

Fri, 12 Dec 2008 06:50:59 -0600

Re: SCreswick@Gentex Signing Off

John Burke

Fri, 12 Dec 2008 07:12:43 -0800

Season's Greetings

Brian Ellis

Mon, 15 Dec 2008 14:34:57 +0200

Randall L Bock

Mon, 15 Dec 2008 07:43:18 -0500

roland jaquet

Mon, 15 Dec 2008 14:37:09 +0100

Barbara Burcham

Mon, 15 Dec 2008 09:27:15 -0600

Inge

Mon, 15 Dec 2008 08:04:11 -0800

Steve Creswick

Mon, 15 Dec 2008 12:30:30 -0500

Tan Geok Ang

Tue, 16 Dec 2008 10:46:32 +0800

set technet noemail

Kim Sterling

Wed, 3 Dec 2008 14:21:26 -0600

Re: set technet noemail

Barbara Burcham

Wed, 3 Dec 2008 14:27:57 -0600

Re: set technet noemail

Craig Cullum

Wed, 3 Dec 2008 14:32:19 -0600

Shorts in flex,

Steve Kelly

Thu, 4 Dec 2008 17:02:47 -0500

Re: Shorts in flex,

James Mahoney

Thu, 4 Dec 2008 17:11:06 -0500

Re: Shorts in flex,

Steve Kelly

Fri, 5 Dec 2008 10:06:42 -0500

Solder mask removal

Temkin, Gregg

Thu, 11 Dec 2008 11:33:26 -0800

Steve Gregory

Thu, 11 Dec 2008 13:44:57 -0600

Douglas Pauls

Thu, 11 Dec 2008 14:04:50 -0600

Ahne Oosterhof

Thu, 11 Dec 2008 12:06:04 -0800

Whittaker, Dewey (EHCOE)

Thu, 11 Dec 2008 13:22:01 -0700

Andy Price

Thu, 11 Dec 2008 15:20:31 -0500

Kevin Glidden

Thu, 11 Dec 2008 15:33:11 -0500

Dennis Fritz

Thu, 11 Dec 2008 16:14:55 -0500

John Burke

Thu, 11 Dec 2008 13:15:39 -0800

Step Stencil Requirements

Ken Bloomquist

Thu, 11 Dec 2008 15:58:43 -0800

Re: Step Stencil Requirements

Mark C.

Fri, 5 Dec 2008 20:45:56 -0600

Stripping Magnet Wire

Kane, Joseph E (US SSA)

Tue, 2 Dec 2008 10:28:19 -0500

Schaefer, Chris

Tue, 2 Dec 2008 10:13:52 -0600

Victor Hernandez

Tue, 2 Dec 2008 10:16:55 -0600

R Sedlak

Tue, 2 Dec 2008 13:30:17 -0800

Joyce Koo

Tue, 2 Dec 2008 19:56:39 -0500

Diamond, Patrick

Wed, 3 Dec 2008 07:14:19 -0000

Paul Edwards

Wed, 3 Dec 2008 09:51:09 -0800

Joe Fjelstad

Wed, 3 Dec 2008 13:25:49 EST

Paul Edwards

Wed, 3 Dec 2008 12:11:15 -0800

R Sedlak

Wed, 3 Dec 2008 12:29:31 -0800

TechNet Digest - 22 Dec 2008 to 23 Dec 2008 (#2008-350)

Joe Fjelstad

Wed, 3 Dec 2008 15:37:41 EST

Re: TechNet Digest - 22 Dec 2008 to 23 Dec 2008 (#2008-350)

Paul Carter

Wed, 24 Dec 2008 06:26:30 -0000

test post NTC

Wilson, Bob

Wed, 17 Dec 2008 13:35:14 -0800

Tin Pest

Rex Waygood

Mon, 22 Dec 2008 15:14:44 -0000

Re: Tin Pest

David D. Hillman

Mon, 22 Dec 2008 09:20:49 -0600

Re: Tin Pest

Rex Waygood

Mon, 22 Dec 2008 16:38:53 -0000

to apply partition correction on individual daisy chains or not?

Nieznanski, John A - SSD

Thu, 18 Dec 2008 12:43:55 -0500

Re: to apply partition correction on individual daisy chains or not?

Werner engelmaier

Thu, 18 Dec 2008 13:38:16 -0500

Re: to apply partition correction on individual daisy chains or not?

Louis Hart

Thu, 18 Dec 2008 14:28:13 -0500

Re: to apply partition correction on individual daisy chains or not?

Nieznanski, John A - SSD

Thu, 18 Dec 2008 14:33:27 -0500

Re: to apply partition correction on individual daisy chains or not?

Werner engelmaier

Thu, 18 Dec 2008 15:07:06 -0500

Re: to apply partition correction on individual daisy chains or not?

Nieznanski, John A - SSD

Thu, 18 Dec 2008 18:54:36 -0500

Re: to apply partition correction on individual daisy chains or not?

Werner engelmaier

Thu, 18 Dec 2008 19:13:00 -0500

Underfill, inhibition due to leftover activators in the flux residue

Phillip Bavaro

Mon, 22 Dec 2008 15:02:18 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Bev Christian

Mon, 22 Dec 2008 18:34:05 -0500

Re: Underfill, inhibition due to leftover activators in the flux residue

Bev Christian

Mon, 22 Dec 2008 20:12:30 -0500

Re: Underfill, inhibition due to leftover activators in the flux residue

Bev Christian

Mon, 22 Dec 2008 20:15:37 -0500

Re: Underfill, inhibition due to leftover activators in the flux residue

Dwight Mattix

Mon, 22 Dec 2008 17:33:50 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Paul Edwards

Mon, 22 Dec 2008 17:33:05 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Joyce Koo

Tue, 23 Dec 2008 07:43:46 -0500

Re: Underfill, inhibition due to leftover activators in the flux residue

David D. Hillman

Tue, 23 Dec 2008 06:54:57 -0600

Re: Underfill, inhibition due to leftover activators in the flux residue

Stadem, Richard D.

Tue, 23 Dec 2008 08:14:58 -0600

Re: Underfill, inhibition due to leftover activators in the flux residue

Dwight Mattix

Tue, 23 Dec 2008 08:45:53 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Thayer, Wayne

Tue, 23 Dec 2008 12:43:37 -0500

Re: Underfill, inhibition due to leftover activators in the flux residue

Syed Ahmad

Wed, 24 Dec 2008 09:18:26 -0600

Re: Underfill, inhibition due to leftover activators in the flux residue

Phillip Bavaro

Wed, 24 Dec 2008 10:38:02 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Phillip Bavaro

Wed, 24 Dec 2008 10:40:35 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Phillip Bavaro

Wed, 24 Dec 2008 11:17:00 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Phillip Bavaro

Wed, 24 Dec 2008 11:28:51 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Paul Edwards

Wed, 24 Dec 2008 13:32:26 -0800

Re: Underfill, inhibition due to leftover activators in the flux residue

Thayer, Wayne

Fri, 26 Dec 2008 15:02:58 -0500

Unsubscribe

Bob Perkins

Fri, 19 Dec 2008 13:48:39 -0800

vibration testing of tin-lead and lead-free solder joints

Joe Fjelstad

Mon, 8 Dec 2008 15:45:22 EST

Re: Vibration testing of tin-lead and lead-free solder joints

Joe Fjelstad

Mon, 8 Dec 2008 16:01:14 EST

Re: vibration testing of tin-lead and lead-free solder joints

Paul Edwards

Fri, 19 Dec 2008 09:32:25 -0800

Re: vibration testing of tin-lead and lead-free solder joints

Haynes, Kim

Fri, 19 Dec 2008 14:29:45 -0600

Way off-topic: CrO2 cassette tape

Craig Cullum

Thu, 18 Dec 2008 09:04:05 -0600

Bev Christian

Thu, 18 Dec 2008 10:07:23 -0500

Simonik, Dave R. (David)

Thu, 18 Dec 2008 10:28:03 -0500

Bill Campbell

Thu, 18 Dec 2008 10:55:15 -0600

Roger Stoops

Thu, 18 Dec 2008 12:06:04 -0500

Hernefjord Ingemar

Fri, 19 Dec 2008 09:30:23 +0100

What are the industrial standards for Solder paste printing limits?

N Burtt

Fri, 19 Dec 2008 03:15:12 -0600

Rudolph yu

Mon, 1 Dec 2008 20:51:34 +0000

Re: What are the industrial standards for Solder paste printing limits?

Robert Kondner

Mon, 1 Dec 2008 16:47:03 -0500

Re: What are the industrial standards for Solder paste printing limits?

Andy Ng

Mon, 1 Dec 2008 15:17:20 -0800

Re: What are the industrial standards for Solder paste printing limits?

Rudolph yu

Mon, 1 Dec 2008 23:51:37 +0000

Re: What are the industrial standards for Solder paste printing limits?

Andy Ng

Mon, 1 Dec 2008 16:29:30 -0800

Re: What are the industrial standards for Solder paste printing limits?

Rudolph yu

Tue, 2 Dec 2008 06:41:15 +0000

Re: What are the industrial standards for Solder paste printing limits?

Stadem, Richard D.

Tue, 2 Dec 2008 07:19:29 -0600

Re: What are the industrial standards for Solder paste printing limits?

Louis Hart

Tue, 2 Dec 2008 10:47:34 -0500

Re: What are the industrial standards for Solder paste printing limits?

Andy Ng

Tue, 2 Dec 2008 11:06:30 -0800

Re: What are the industrial standards for Solder paste printing limits?

Jason Zhao

Tue, 2 Dec 2008 14:22:42 -0600

Re: What are the industrial standards for Solder paste printing limits?

Stadem, Richard D.

Tue, 2 Dec 2008 14:22:49 -0600

Re: What are the industrial standards for Solder paste printing limits?

Tan Geok Ang

Wed, 3 Dec 2008 10:38:17 +0800

What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Rudolph yu

Mon, 22 Dec 2008 18:34:59 +0000

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Robert Kondner

Mon, 22 Dec 2008 13:43:23 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Werner engelmaier

Mon, 22 Dec 2008 13:50:13 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Rudolph yu

Mon, 22 Dec 2008 18:56:01 +0000

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Phillip Bavaro

Mon, 22 Dec 2008 11:16:35 -0800

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Stadem, Richard D.

Mon, 22 Dec 2008 13:22:42 -0600

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Stadem, Richard D.

Mon, 22 Dec 2008 13:25:44 -0600

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

John Burke

Mon, 22 Dec 2008 12:46:03 -0800

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Joyce Koo

Mon, 22 Dec 2008 19:20:40 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Paul Reid

Tue, 23 Dec 2008 08:18:22 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Joyce Koo

Tue, 23 Dec 2008 10:37:49 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Paul Reid

Tue, 23 Dec 2008 16:11:56 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Igoshev, Vladimir

Tue, 23 Dec 2008 16:22:28 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Stadem, Richard D.

Tue, 23 Dec 2008 15:38:22 -0600

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Guy Ramsey

Tue, 23 Dec 2008 23:33:55 -0500

Re: What could be the root cause for a failed board that passed functiona test after going through reflow for the 2nd time?

Dale Ritzen

Wed, 24 Dec 2008 09:05:34 -0600

X'mas venture

Fw: X'mas venture

Joyce Koo

Wed, 24 Dec 2008 17:35:38 -0500

x-outs in panel

Wilson, Bob

Wed, 17 Dec 2008 10:57:59 -0800

x-outs in panel

Wilson, Bob

Wed, 17 Dec 2008 10:47:05 -0800

Thayer, Wayne

Wed, 17 Dec 2008 17:31:10 -0500

John Burke

Wed, 17 Dec 2008 17:03:05 -0800

Pete Houwen

Thu, 18 Dec 2008 08:03:45 -0600

Re: RE: Xbox360 BGA issue

Wolfgang Erat

Mon, 22 Dec 2008 08:52:13 -0500

Xbox360 BGA issue

RE: Xbox360 BGA issue

Steve Gregory

Mon, 8 Dec 2008 07:03:08 -0600

Victor Hernandez

Mon, 8 Dec 2008 07:12:05 -0600

Re: RE: Xbox360 BGA issue

Robert Kondner

Mon, 8 Dec 2008 10:02:05 -0500

Re: RE: Xbox360 BGA issue

David Tremmel

Mon, 8 Dec 2008 20:56:24 -0600

Xbox360 BGAs

David Tremmel

Fri, 5 Dec 2008 22:38:22 -0600

Terry Kozlyk

Sat, 6 Dec 2008 07:26:20 -0700

Oscar Fallah

Sat, 6 Dec 2008 11:59:16 -0800

Xbox360 BGAs

David Tremmel

Sun, 7 Dec 2008 09:17:47 -0600

John Goulet

Sun, 7 Dec 2008 19:44:19 +0000

Joe Fjelstad

Sun, 7 Dec 2008 16:27:48 EST

Werner engelmaier

Mon, 8 Dec 2008 18:35:48 -0500

David Tremmel

Mon, 8 Dec 2008 22:20:33 -0600

Werner engelmaier

Tue, 9 Dec 2008 01:00:59 -0500

Robert Kondner

Tue, 9 Dec 2008 08:57:03 -0500

Werner engelmaier

Tue, 9 Dec 2008 18:30:02 -0500

Robert Kondner

Tue, 9 Dec 2008 18:56:59 -0500

Werner engelmaier

Tue, 9 Dec 2008 21:11:29 -0500

Igoshev, Vladimir

Wed, 10 Dec 2008 11:50:27 -0500

Werner engelmaier

Wed, 10 Dec 2008 14:26:20 -0500

Igoshev, Vladimir

Wed, 10 Dec 2008 15:59:18 -0500

Werner engelmaier

Wed, 10 Dec 2008 16:21:26 -0500

Igoshev, Vladimir

Wed, 10 Dec 2008 16:26:25 -0500

Werner engelmaier

Wed, 10 Dec 2008 22:05:09 -0500

Igoshev, Vladimir

Thu, 11 Dec 2008 09:42:33 -0500

Werner engelmaier

Thu, 11 Dec 2008 18:26:54 -0500

Igoshev, Vladimir

Thu, 11 Dec 2008 18:59:28 -0500

N Burtt

Fri, 12 Dec 2008 03:17:17 -0600

Igoshev, Vladimir

Fri, 12 Dec 2008 10:14:53 -0500

Xbox360 BGAs NTC

Mike Fenner

Thu, 11 Dec 2008 10:36:23 -0000

David D. Hillman

Thu, 11 Dec 2008 07:07:56 -0600

Ahne Oosterhof

Thu, 11 Dec 2008 09:14:44 -0800

Joyce Koo

Thu, 11 Dec 2008 12:27:44 -0500

Douglas Pauls

Thu, 11 Dec 2008 11:38:05 -0600