LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Creswick, Steven

Wed, 1 Oct 2008 14:33:49 -0400

Creswick, Steven

Wed, 1 Oct 2008 14:44:03 -0400

Phil Nutting

Wed, 1 Oct 2008 15:01:16 -0400

Joe Lara (Select Circuits)

Wed, 1 Oct 2008 15:19:13 -0400

Douglas O. Pauls

Wed, 1 Oct 2008 14:06:41 -0500

Phil Nutting

Wed, 1 Oct 2008 15:47:30 -0400

Inge

Wed, 1 Oct 2008 13:52:59 -0700

Inge

Fri, 3 Oct 2008 11:02:55 -0700

Creswick, Steven

Fri, 3 Oct 2008 20:33:21 -0400

"rock that grows tentacles"

Robin John

Tue, 21 Oct 2008 16:36:52 -0500

Brooks, Bill

Tue, 7 Oct 2008 12:19:13 -0700

10% Discount ends November 21, 2008 - IPC/JEDEC Lead-Free Conference December 8-10, 2008 - Dallas, TX 10% Discount ends November 21, 2008

Michelle Michelotti

Thu, 30 Oct 2008 11:59:21 -0500

Acceptance spec for pin hole/blow hole

Charming Chan

Mon, 20 Oct 2008 16:54:10 +0800

Re: Acceptance spec for pin hole/blow hole

Guy Ramsey

Mon, 20 Oct 2008 09:04:20 -0400

Au embrittlement on Copper vs Nickel

Gumpert, Ben

Fri, 24 Oct 2008 10:58:47 -0400

David D. Hillman

Fri, 24 Oct 2008 10:28:47 -0500

Gumpert, Ben

Fri, 24 Oct 2008 14:03:46 -0400

David D. Hillman

Fri, 24 Oct 2008 14:11:49 -0500

Werner Engelmaier /*

Fri, 24 Oct 2008 16:18:44 -0400

Inge

Sat, 25 Oct 2008 11:20:32 -0700

Bev Christian

Sat, 25 Oct 2008 14:29:36 -0400

David D. Hillman

Mon, 27 Oct 2008 08:33:56 -0500

Gumpert, Ben

Mon, 27 Oct 2008 07:27:04 -0400

Stadem, Richard D.

Mon, 27 Oct 2008 08:07:38 -0500

Gumpert, Ben

Tue, 28 Oct 2008 05:53:33 -0400

Pete Houwen

Thu, 30 Oct 2008 15:30:20 -0500

Barrel and Corner cracks in copper elctroplating

Pete Houwen

Fri, 31 Oct 2008 09:59:43 -0500

Ido Mashall

Fri, 3 Oct 2008 21:12:43 +0300

Re: Barrel and Corner cracks in copper elctroplating

Scott Westheimer

Fri, 3 Oct 2008 16:52:47 -0400

Re: Barrel and Corner cracks in copper elctroplating

Paul Reid

Fri, 3 Oct 2008 17:51:57 -0400

Re: Barrel and Corner cracks in copper elctroplating

Ido Mashall

Sat, 4 Oct 2008 11:41:50 +0300

Re: Barrel and Corner cracks in copper elctroplating

SUBSCRIBE technet legg

Sat, 4 Oct 2008 10:21:10 -0500

Re: Barrel and Corner cracks in copper elctroplating

Paul Reid

Sat, 4 Oct 2008 19:28:17 -0400

Re: Barrel and Corner cracks in copper elctroplating

Ido Mashall

Sun, 5 Oct 2008 22:54:59 +0200

Re: Barrel and Corner cracks in copper elctroplating

Ido Mashall

Mon, 6 Oct 2008 14:04:05 +0200

Re: Barrel and Corner cracks in copper elctroplating

Werner Engelmaier /*

Mon, 6 Oct 2008 16:26:03 -0400

Re: Barrel and Corner cracks in copper elctroplating

Terry L. Munson

Mon, 6 Oct 2008 16:34:50 EDT

Re: Barrel and Corner cracks in copper elctroplating

Paul Reid

Mon, 6 Oct 2008 17:56:24 -0400

Re: Barrel and Corner cracks in copper elctroplating

Werner Engelmaier /*

Tue, 7 Oct 2008 04:42:47 EDT

Re: Barrel and Corner cracks in copper elctroplating

Paul Reid

Tue, 7 Oct 2008 08:27:57 -0400

Re: Barrel and Corner cracks in copper elctroplating

Igoshev, Vladimir

Tue, 7 Oct 2008 08:37:27 -0400

Re: Barrel and Corner cracks in copper elctroplating

Stadem, Richard D.

Tue, 7 Oct 2008 07:40:33 -0500

Re: Barrel and Corner cracks in copper elctroplating

Whittaker, Dewey (EHCOE)

Tue, 7 Oct 2008 07:02:30 -0700

Re: Barrel and Corner cracks in copper elctroplating

Tue, 7 Oct 2008 10:58:22 -0400

Barrel and Corner cracks in copper electroplating

Re: Barrel and Corner cracks in copper electroplating

Victor Hernandez

Mon, 6 Oct 2008 06:05:53 -0500

Re: Barrel and Corner cracks in copper electroplating

Randy Bock Sr.

Mon, 6 Oct 2008 07:08:37 -0400

Re: Barrel and Corner cracks in copper electroplating

Victor Hernandez

Mon, 6 Oct 2008 06:20:51 -0500

Re: Barrel and Corner cracks in copper electroplating

Ido Mashall

Mon, 6 Oct 2008 13:56:39 +0200

Re: Barrel and Corner cracks in copper electroplating

Victor Hernandez

Tue, 7 Oct 2008 06:54:55 -0500

Big problem when coating with Parylene C.

Re: Big problem when coating with Parylene C.

Reuven Rokah

Thu, 2 Oct 2008 10:03:10 +0300

Conductor spacing in dependance of PCB material

Hechenberger Philipp

Thu, 2 Oct 2008 17:26:12 +0200

Re: Conductor spacing in dependance of PCB material

Brian Ellis

Thu, 2 Oct 2008 19:03:31 +0300

Connection failure in the super collider

John Burke

Mon, 6 Oct 2008 14:31:55 -0700

Re: Connection failure in the super collider

Mon, 6 Oct 2008 17:59:38 EDT

Controlled RH% Versus Screenprinting Results

Leland Woodall

Wed, 8 Oct 2008 14:10:38 -0400

John Burke

Wed, 8 Oct 2008 11:46:57 -0700

Nowland, Russell Howard (Russell)

Wed, 8 Oct 2008 13:57:52 -0500

Mike Sewell

Wed, 8 Oct 2008 14:00:24 -0500

Leland Woodall

Wed, 8 Oct 2008 15:59:46 -0400

Nowland, Russell Howard (Russell)

Wed, 8 Oct 2008 15:04:18 -0500

Stadem, Richard D.

Wed, 8 Oct 2008 15:06:26 -0500

John Burke

Wed, 8 Oct 2008 13:09:36 -0700

Creswick, Steven

Thu, 9 Oct 2008 05:46:36 -0400

Whittaker, Dewey (EHCOE)

Mon, 13 Oct 2008 06:55:47 -0700

Design Rules for Punching Bare PCBs

Joe Fjelstad

Mon, 13 Oct 2008 16:17:35 EDT

Copper anode placement

Adam Seychell

Tue, 28 Oct 2008 18:06:13 +1100

CPK

john queen

Tue, 28 Oct 2008 10:55:01 -0000

Re: CPK

Guy Ramsey

Wed, 29 Oct 2008 10:22:09 -0400

James Verrette

Tue, 21 Oct 2008 16:04:48 -0400

Designers Day - Irvine, California, October 22, 2008

Tina Nerad

Thu, 9 Oct 2008 13:37:11 -0500

Electroless parameters

mp3

Fri, 24 Oct 2008 06:48:48 +0530

Re: Electroless parameters

Scott Westheimer

Fri, 24 Oct 2008 06:50:14 -0400

Re: Electroless parameters

Bob METCALF

Fri, 24 Oct 2008 07:03:09 -0700

Electrolytic (Flash) Nickel Gold Finish

Anand

Wed, 1 Oct 2008 16:02:42 -0500

Lee parker

Wed, 1 Oct 2008 20:44:55 -0400

Hernefjord Ingemar

Thu, 2 Oct 2008 09:00:06 +0200

Lee parker

Thu, 2 Oct 2008 10:01:24 -0400

Anil kher

Fri, 3 Oct 2008 12:31:12 +0530

Werner Engelmaier /*

Fri, 3 Oct 2008 05:05:55 -0400

Joyce Koo

Fri, 3 Oct 2008 08:57:24 -0400

anand paliwal

Fri, 3 Oct 2008 08:39:39 -0600

George Milad

Fri, 3 Oct 2008 11:35:43 EDT

Lee parker

Fri, 3 Oct 2008 19:51:26 -0400

Werner Engelmaier /*

Sat, 4 Oct 2008 04:14:46 EDT

Yong How GOH

Tue, 7 Oct 2008 10:38:48 +0800

Elongation for CCL & electroplating Cu

anand paliwal

Tue, 7 Oct 2008 08:22:10 -0600

Lin Leo

Wed, 15 Oct 2008 18:45:07 +0800

Re: Elongation for CCL & electroplating Cu

Werner Engelmaier /*

Wed, 15 Oct 2008 09:11:35 -0400

encap and polymeric material spec

Joyce Koo

Thu, 9 Oct 2008 21:39:41 -0400

europeon commisioners email??

PCB designer

Mon, 27 Oct 2008 11:18:22 -0500

Failure Analysis Lab with Ion Chromatography testing capabilities

James Verrette

Thu, 2 Oct 2008 14:21:51 -0400

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Kelly Morris

Thu, 2 Oct 2008 13:07:16 -0500

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Graham Collins

Thu, 2 Oct 2008 15:34:12 -0300

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Joyce Koo

Thu, 2 Oct 2008 14:34:28 -0400

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Thomas Borman

Thu, 2 Oct 2008 14:47:24 -0500

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Stadem, Richard D.

Thu, 2 Oct 2008 15:05:40 -0500

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Bob METCALF

Thu, 2 Oct 2008 15:11:03 -0700

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Mark Palmer

Thu, 2 Oct 2008 16:42:39 -0500

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Joyce Koo

Thu, 2 Oct 2008 18:33:02 -0400

Re: Failure Analysis Lab with Ion Chromatography testing capabilities

Sean Hill

Thu, 2 Oct 2008 15:43:35 -0700

Friday - off topic question - do you get e-mails on your phone

Kim Sterling

Fri, 10 Oct 2008 13:09:20 -0500

Re: Friday - off topic question - do you get e-mails on your phone

Fri, 10 Oct 2008 14:19:41 -0400

Re: Friday - off topic question - do you get e-mails on your phone

Randy Bock Sr.

Fri, 10 Oct 2008 14:30:15 -0400

Re: Friday - off topic question - do you get e-mails on your phone

Bev Christian

Fri, 10 Oct 2008 14:55:10 -0400

Re: Friday - off topic question - do you get e-mails on your phone

John Burke

Fri, 10 Oct 2008 13:03:09 -0700

Re: Friday - off topic question - do you get e-mails on your phone

Inge

Fri, 10 Oct 2008 13:54:44 -0700

Re: Friday - off topic question - do you get e-mails on your phone

Bob METCALF

Fri, 10 Oct 2008 15:49:05 -0700

Re: Friday - off topic question - do you get e-mails on your phone

Sean Hill

Fri, 10 Oct 2008 16:10:35 -0700

Re: Friday - off topic question - do you get e-mails on your phone

Mike Fenner

Sat, 11 Oct 2008 12:23:12 +0100

Re: Friday - off topic question - do you get e-mails on your phone

Leif Erik Laerum

Mon, 13 Oct 2008 07:45:44 -0500

Re: Friday - off topic question - do you get e-mails on your phone

Ken Bloomquist

Mon, 13 Oct 2008 07:36:20 -0700

Re: Friday - off topic question - do you get e-mails on your phone

Douglas O. Pauls

Mon, 13 Oct 2008 09:59:29 -0500

Re: Friday - off topic question - do you get e-mails on your phone

Bev Christian

Mon, 13 Oct 2008 11:17:08 -0400

Re: Friday - off topic question - do you get e-mails on your phone

Douglas O. Pauls

Mon, 13 Oct 2008 10:20:56 -0500

Re: Friday - off topic question - do you get e-mails on your phone

Stadem, Richard D.

Mon, 13 Oct 2008 10:42:41 -0500

Friday NTC

Phil Nutting

Fri, 10 Oct 2008 14:27:02 -0400

Re: Friday NTC

Whittaker, Dewey (EHCOE)

Mon, 13 Oct 2008 08:15:07 -0700

Get in touch with the Market! IPC International Test & Inspection Technology Conference - November 10-12, 2008 Santa Clara, CA

Michelle Michelotti

Thu, 23 Oct 2008 14:44:31 -0500

Hard vs. soft gold

Guy Ramsey

Thu, 23 Oct 2008 05:11:33 -0400

Re: Hard vs. soft gold

Stadem, Richard D.

Thu, 23 Oct 2008 08:07:47 -0500

How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Charming Chan

Tue, 28 Oct 2008 20:25:01 +0800

Re: How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Tan Geok Ang

Tue, 28 Oct 2008 22:00:08 +0800

Re: How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Charming Chan

Wed, 29 Oct 2008 08:59:22 +0800

Re: How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Tan Geok Ang

Wed, 29 Oct 2008 09:16:54 +0800

Re: How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Pete Houwen

Wed, 29 Oct 2008 08:06:55 -0500

Re: How to improve solder filling and wetting contact angles for thermal vias at wave soldering process.

Phil Nutting

Wed, 29 Oct 2008 11:29:28 -0400

Hurry & register for Test & Inspection Conference, November 10-12, 2008 Santa Clara, CA

Michelle Michelotti

Wed, 15 Oct 2008 15:00:22 -0500

Hurry and Register for IPC International Test & Inspection Technology Conference - November 10-12, 2008 Santa Clara, CA

Michelle Michelotti

Wed, 8 Oct 2008 10:00:55 -0500

Ionic Testing Process

Chris Schaefer

Wed, 15 Oct 2008 15:13:15 -0500

Re: Ionic Testing Process

Joe Russeau

Wed, 15 Oct 2008 18:02:03 -0400

Re: Ionic Testing Process

Brian Ellis

Thu, 16 Oct 2008 14:31:20 +0300

IPC 2222 classes

Louis Hart

Thu, 30 Oct 2008 10:50:05 -0400

Woolley, Mark D. (Mark)

Thu, 30 Oct 2008 09:12:48 -0600

Louis Hart

Thu, 30 Oct 2008 11:41:17 -0400

Gary Ferrari

Thu, 30 Oct 2008 11:43:43 -0400

IPC Eco-Compliance Webcast Series - Last Chance to Register!

Guy Ramsey

Thu, 30 Oct 2008 22:00:51 -0400

Michelle Michelotti

Tue, 14 Oct 2008 09:56:06 -0500

IPC hardware assembly spec

Genny Gibbard

Wed, 8 Oct 2008 16:11:19 -0600

Re: IPC hardware assembly spec

Phil Nutting

Thu, 9 Oct 2008 08:16:50 -0400

Re: IPC hardware assembly spec

Douglas O. Pauls

Thu, 9 Oct 2008 07:27:25 -0500

IPC's Eco-Compliance October Webcast Series Last Chance to Register!

Michelle Michelotti

Mon, 6 Oct 2008 08:36:10 -0500

IPC-610, 8.2.5.5

Genny Gibbard

Fri, 24 Oct 2008 16:22:25 -0600

Gumpert, Ben

Mon, 27 Oct 2008 07:10:00 -0400

Genny Gibbard

Mon, 27 Oct 2008 08:58:08 -0600

Steve Gregory

Mon, 27 Oct 2008 12:13:12 -0500

Green, Mike

Tue, 28 Oct 2008 10:53:02 -0600

Ted Tontis

Tue, 28 Oct 2008 12:31:12 -0500

IPC/JEDEC Transitioning to Lead-Free Conference December 8-10, 2008 - Dallas, TX

Genny Gibbard

Tue, 28 Oct 2008 12:05:37 -0600

Michelle Michelotti

Thu, 16 Oct 2008 09:14:42 -0500

IR reflow oven

Wilson, Bob

Thu, 2 Oct 2008 14:13:21 -0700

Kevin Glidden

Fri, 3 Oct 2008 08:32:31 -0400

Croslin, Robert

Fri, 3 Oct 2008 09:19:36 -0400

Wilson, Bob

Fri, 3 Oct 2008 08:46:30 -0700

Kevin Glidden

Fri, 3 Oct 2008 12:06:57 -0400

David D. Hillman

Fri, 3 Oct 2008 11:12:37 -0500

Joe Fjelstad

Fri, 3 Oct 2008 12:32:02 EDT

Wilson, Bob

Fri, 3 Oct 2008 10:11:12 -0700

P. Langeveld

Fri, 3 Oct 2008 20:19:57 +0200

Stadem, Richard D.

Sun, 5 Oct 2008 08:54:10 -0500

Last Chance to Register for IPC's Power Conversion Conference Featuring New Industry Standard

Stadem, Richard D.

Sun, 5 Oct 2008 08:55:50 -0500

Michelle Michelotti

Wed, 22 Oct 2008 12:13:31 -0500

Last Chance to Register! IPC's Eco-Compliance Webcast Series - October 2008

Michelle Michelotti

Wed, 1 Oct 2008 14:27:03 -0500

Lead Free BGA'S

John Foster

Tue, 21 Oct 2008 08:21:14 -0700

Igoshev, Vladimir

Tue, 21 Oct 2008 11:27:16 -0400

Deac Descoteaux

Tue, 21 Oct 2008 11:27:35 -0400

Gumpert, Ben

Tue, 21 Oct 2008 11:35:19 -0400

Rex Waygood

Tue, 21 Oct 2008 17:08:34 +0100

Croslin, Robert

Tue, 21 Oct 2008 12:09:50 -0400

Lee Whiteman

Tue, 21 Oct 2008 12:10:29 -0400

Woolley, Mark D. (Mark)

Tue, 21 Oct 2008 10:17:56 -0600

David D. Hillman

Tue, 21 Oct 2008 11:22:50 -0500

Stadem, Richard D.

Tue, 21 Oct 2008 12:03:11 -0500

Paul Edwards

Tue, 21 Oct 2008 10:03:06 -0700

Joyce Koo

Tue, 21 Oct 2008 13:19:12 -0400

Werner Engelmaier /*

Tue, 21 Oct 2008 14:43:37 -0400

David D. Hillman

Tue, 21 Oct 2008 14:37:51 -0500

Reuven Rokah

Wed, 22 Oct 2008 09:46:46 +0200

Stadem, Richard D.

Thu, 23 Oct 2008 14:03:22 -0500

Machine Key Performance Indicators

Bob Willis

Sat, 25 Oct 2008 14:34:58 +0100

Rueda, Ernesto

Sat, 4 Oct 2008 12:46:39 -0700

Metal Core PCB

mp3

Fri, 24 Oct 2008 06:57:44 +0530

MICRO VIA REPAIR

Re: MICRO VIA REPAIR

Wolfgang Erat

Sun, 12 Oct 2008 15:17:58 -0400

Need soldering advice ASAP No II

Inge

Thu, 9 Oct 2008 09:31:10 -0700

Thayer, Wayne

Thu, 9 Oct 2008 13:19:51 -0400

Inge

Thu, 9 Oct 2008 10:41:49 -0700

Inge

Thu, 9 Oct 2008 10:55:45 -0700

Haynes, Kim

Thu, 9 Oct 2008 13:11:23 -0500

Inge

Thu, 9 Oct 2008 11:34:04 -0700

Creswick, Steven

Thu, 9 Oct 2008 14:51:19 -0400

Inge

Thu, 9 Oct 2008 12:08:40 -0700

Creswick, Steven

Thu, 9 Oct 2008 15:30:58 -0400

Haynes, Kim

Thu, 9 Oct 2008 15:37:35 -0500

Need soldering advice ASAP No II - tangential question..

Mike Fenner

Mon, 13 Oct 2008 09:32:57 +0100

Re: Need soldering advice ASAP No II - tangential question..

Eric CHRISTISON

Mon, 13 Oct 2008 09:49:37 +0100

Re: Need soldering advice ASAP No II - tangential question..

Woolley, Mark D. (Mark)

Mon, 13 Oct 2008 10:13:35 -0600

Re: Need soldering advice ASAP No II - tangential question..

Mon, 13 Oct 2008 13:01:29 EDT

Re: Need soldering advice ASAP No II - tangential question..

Mike Fenner

Tue, 14 Oct 2008 11:40:48 +0100

Re: Need soldering advice ASAP No II - tangential question..

Jack Crawford

Tue, 14 Oct 2008 20:50:17 -0500

Re: Need soldering advice ASAP No II - tangential question..

Mike Fenner

Wed, 15 Oct 2008 11:36:19 +0100

Need soldering advice ASAP!

Inge

Thu, 9 Oct 2008 08:59:46 -0700

Paul Edwards

Thu, 9 Oct 2008 09:20:18 -0700

Inge

Thu, 9 Oct 2008 09:35:45 -0700

Creswick, Steven

Thu, 9 Oct 2008 12:36:50 -0400

Creswick, Steven

Thu, 9 Oct 2008 12:41:17 -0400

Inge

Thu, 9 Oct 2008 09:48:08 -0700

Inge

Thu, 9 Oct 2008 09:53:14 -0700

Igoshev, Vladimir

Thu, 9 Oct 2008 13:00:10 -0400

Inge

Thu, 9 Oct 2008 10:02:38 -0700

McGlaughlin, Jeffrey A

Thu, 9 Oct 2008 13:06:48 -0400

Creswick, Steven

Thu, 9 Oct 2008 13:09:25 -0400

Inge

Thu, 9 Oct 2008 10:29:49 -0700

Thayer, Wayne

Thu, 9 Oct 2008 15:18:28 -0400

Inge

Thu, 9 Oct 2008 12:25:53 -0700

Creswick, Steven

Thu, 9 Oct 2008 15:33:24 -0400

Hernefjord Ingemar

Fri, 10 Oct 2008 10:25:55 +0200

Creswick, Steven

Fri, 10 Oct 2008 05:35:58 -0400

Joyce Koo

Fri, 10 Oct 2008 06:58:08 -0400

Joyce Koo

Fri, 10 Oct 2008 07:14:04 -0400

Inge

Sat, 11 Oct 2008 00:36:13 -0700

Inge

Sat, 11 Oct 2008 00:38:34 -0700

Mike Fenner

Sat, 11 Oct 2008 09:56:55 +0100

Joyce Koo

Sat, 11 Oct 2008 08:00:07 -0400

PCB Manufacturing Processes

Mike Fenner

Mon, 13 Oct 2008 08:53:29 +0100

PCB Documentation

Kuczynski, Michael (MED US)

Mon, 6 Oct 2008 19:07:14 -0400

Re: PCB Documentation

- bogert

Mon, 6 Oct 2008 19:28:41 -0400

Re: PCB Documentation

Gumpert, Ben

Tue, 7 Oct 2008 06:39:36 -0400

Re: PCB Documentation

Pete Houwen

Tue, 7 Oct 2008 08:53:55 -0500

roland jaquet

Fri, 10 Oct 2008 14:20:55 +0200

Steve Gregory

Fri, 10 Oct 2008 07:35:39 -0500

Gumpert, Ben

Fri, 10 Oct 2008 08:35:12 -0400

Temkin, Gregg

Fri, 10 Oct 2008 07:53:09 -0700

PCB pad non-wetting issues

Douglas O. Pauls

Mon, 13 Oct 2008 09:25:53 -0500

Paymon Sani

Thu, 9 Oct 2008 09:57:20 -0400

Phil Nutting

Thu, 9 Oct 2008 10:12:52 -0400

John Burke

Thu, 9 Oct 2008 07:25:18 -0700

Paymon Sani

Thu, 9 Oct 2008 10:48:54 -0400

Paymon Sani

Thu, 9 Oct 2008 10:54:03 -0400

Fox, Ian

Thu, 9 Oct 2008 16:02:35 +0100

Igoshev, Vladimir

Thu, 9 Oct 2008 13:08:28 -0400

Tan Geok Ang

Fri, 10 Oct 2008 09:23:04 +0800

John Burke

Thu, 9 Oct 2008 19:12:40 -0700

Paymon Sani

Fri, 10 Oct 2008 08:46:31 -0400

Werner Engelmaier /*

Fri, 10 Oct 2008 09:34:54 -0400

Igoshev, Vladimir

Fri, 10 Oct 2008 09:39:57 -0400

John Burke

Fri, 10 Oct 2008 07:45:11 -0700

Potting Encapsulation and Component Cleanliness

Whittaker, Dewey (EHCOE)

Mon, 13 Oct 2008 07:13:22 -0700

Re: Potting Encapsulation and Component Cleanliness

- bogert

Sat, 4 Oct 2008 07:42:39 -0400

Re: Potting Encapsulation and Component Cleanliness

Joyce Koo

Sat, 4 Oct 2008 08:01:56 -0400

Re: Potting Encapsulation and Component Cleanliness

Graham Naisbitt

Sun, 5 Oct 2008 20:50:50 +0100

Re: Potting Encapsulation and Component Cleanliness

Whittaker, Dewey (EHCOE)

Mon, 6 Oct 2008 13:02:00 -0700

Re: Potting Encapsulation and Component Cleanliness

Bev Christian

Mon, 6 Oct 2008 16:37:35 -0400

Problems with plating vias closed

Dave Connitt

Wed, 15 Oct 2008 13:56:40 -0400

George Milad

Wed, 15 Oct 2008 14:24:01 EDT

Dwight Mattix

Wed, 15 Oct 2008 12:48:49 -0700

Pete Houwen

Thu, 16 Oct 2008 08:36:12 -0500

Dave Connitt

Thu, 16 Oct 2008 10:35:19 -0400

Dennis Fritz

Thu, 16 Oct 2008 11:26:14 -0400

Dwight Mattix

Thu, 16 Oct 2008 08:39:11 -0700

Dwight Mattix

Thu, 16 Oct 2008 09:01:17 -0700

Chezhian, Krishnan (Radhakrishnan)

Fri, 17 Oct 2008 08:32:42 +0800

Process question-Pls reply urgently....!

Dwight Mattix

Thu, 16 Oct 2008 17:56:37 -0700

anand paliwal

Tue, 14 Oct 2008 11:40:37 -0600

Douglas O. Pauls

Tue, 14 Oct 2008 13:08:02 -0500

anand paliwal

Tue, 14 Oct 2008 12:18:45 -0600

Roger Stoops

Tue, 14 Oct 2008 14:22:02 -0400

Lee Whiteman

Tue, 14 Oct 2008 14:23:45 -0400

Lee Whiteman

Tue, 14 Oct 2008 14:28:20 -0400

anand paliwal

Tue, 14 Oct 2008 12:51:38 -0600

Graham Collins

Tue, 14 Oct 2008 15:53:56 -0300

Roger Stoops

Tue, 14 Oct 2008 14:59:54 -0400

Roger Stoops

Tue, 14 Oct 2008 15:03:21 -0400

Jason Zhao

Tue, 14 Oct 2008 14:12:34 -0500

Werner Engelmaier /*

Tue, 14 Oct 2008 15:19:52 -0400

Guy Ramsey

Tue, 14 Oct 2008 15:21:13 -0400

Syed Ahmad

Wed, 15 Oct 2008 09:36:39 -0500

Werner Engelmaier /*

Wed, 15 Oct 2008 12:42:36 -0400

Paul Reid

Wed, 15 Oct 2008 13:47:14 -0400

Lee Whiteman

Wed, 15 Oct 2008 13:52:31 -0400

Paymon Sani

Wed, 15 Oct 2008 17:09:56 -0400

ROHS, FLUX and FLuX CLEANING AGENT

Werner Engelmaier /*

Wed, 15 Oct 2008 22:47:01 -0400

Michelle Michelotti

Thu, 23 Oct 2008 15:56:01 -0500

Re: ROHS, FLUX and FLuX CLEANING AGENT

jonathan noquil

Thu, 9 Oct 2008 15:06:38 +0800

Re: ROHS, FLUX and FLuX CLEANING AGENT

Ahne Oosterhof

Thu, 9 Oct 2008 10:19:31 -0700

Search for Viking 1630FS

Bill Clark

Wed, 15 Oct 2008 12:22:50 -0400

Seeking information on relaxation of FR4 under load over time

- bogert

Mon, 6 Oct 2008 19:19:17 -0400

Re: Seeking information on relaxation of FR4 under load over time

John Burke

Mon, 6 Oct 2008 18:21:07 -0700

SMT dimensions guidelines, 1208

Victor Hernandez

Thu, 9 Oct 2008 08:35:08 -0500

Re: SMT dimensions guidelines, 1208

Donald Kyle

Thu, 9 Oct 2008 08:48:38 -0500

Re: SMT dimensions guidelines, 1208

Lenny Carter

Thu, 9 Oct 2008 10:09:56 -0400

Re: SMT dimensions guidelines, 1208

Croslin, Robert

Thu, 9 Oct 2008 13:34:26 -0400

Sn-Bi Alloy for soldering

Kane, Amol (349)

Tue, 7 Oct 2008 11:56:56 -0400

David D. Hillman

Tue, 7 Oct 2008 14:00:25 -0500

Douglas O. Pauls

Tue, 7 Oct 2008 14:55:08 -0500

Thayer, Wayne

Tue, 7 Oct 2008 16:08:49 -0400

Lee Whiteman

Tue, 7 Oct 2008 17:12:36 -0400

Whittaker, Dewey (EHCOE)

Tue, 7 Oct 2008 14:36:12 -0700

Mike Fenner

Wed, 8 Oct 2008 14:15:06 +0100

Thu, 9 Oct 2008 19:07:30 EDT

Solder fillet

[log in to unmask]

Tue, 28 Oct 2008 16:07:47 +0530

Stadem, Richard D.

Tue, 28 Oct 2008 08:54:43 -0500

Steve Gregory

Tue, 28 Oct 2008 09:31:58 -0500

Robert Kondner

Tue, 28 Oct 2008 10:45:34 -0400

[log in to unmask]

Wed, 29 Oct 2008 09:02:33 +0530

Solder Paste Height Measurement System

Mike Fenner

Wed, 29 Oct 2008 11:51:00 -0000

Robin John

Wed, 15 Oct 2008 15:06:41 -0500

Re: Solder Paste Height Measurement System

Stadem, Richard D.

Wed, 15 Oct 2008 15:34:08 -0500

Re: Solder Paste Height Measurement System

Brandon Judd

Fri, 17 Oct 2008 10:49:49 -0400

SOLDERING BERYLLIUM COPPER

Roberts, Jon

Tue, 7 Oct 2008 09:47:16 -0500

Inge

Tue, 7 Oct 2008 08:56:32 -0700

Roberts, Jon

Tue, 7 Oct 2008 11:08:53 -0500

Inge

Tue, 7 Oct 2008 12:27:09 -0700

Mike Fenner

Wed, 8 Oct 2008 14:03:28 +0100

Soldering to Aluminum?

Pete Houwen

Wed, 29 Oct 2008 09:00:54 -0500

Eric CHRISTISON

Wed, 29 Oct 2008 15:09:50 +0000

Phil Nutting

Wed, 29 Oct 2008 11:34:39 -0400

Dave Dixon

Wed, 29 Oct 2008 16:17:08 -0500

John Burke

Wed, 29 Oct 2008 15:19:39 -0700

Mike Fenner

Thu, 30 Oct 2008 09:21:43 -0000

Mike Fenner

Thu, 30 Oct 2008 09:30:15 -0000

Paul Edwards

Thu, 30 Oct 2008 09:13:35 -0700

Joyce Koo

Thu, 30 Oct 2008 12:37:34 -0400

Standards for Component Cleanliness

Mike Fenner

Fri, 31 Oct 2008 09:31:15 -0000

Bev Christian

Thu, 9 Oct 2008 12:03:27 -0400

Brian Ellis

Fri, 10 Oct 2008 08:58:26 +0300

Joyce Koo

Fri, 10 Oct 2008 02:05:19 -0400

Mike Fenner

Mon, 13 Oct 2008 09:36:11 +0100

Technical query: Land Patterns SMD

Bob Willis

Mon, 13 Oct 2008 13:03:47 +0100

SunStar 991

Tan Geok Ang

Fri, 24 Oct 2008 15:58:19 +0800

Mankeekar Tushar

Fri, 10 Oct 2008 10:23:39 +0530

Re: Technical query: Land Patterns SMD

Mankeekar Tushar

Fri, 10 Oct 2008 10:24:46 +0530

Re: Technical query: Land Patterns SMD

Tan Geok Ang

Fri, 10 Oct 2008 13:49:17 +0800

Throughhole Equipment Training

Karen Capps

Mon, 27 Oct 2008 13:25:21 -0400

Re: Throughhole Equipment Training

Steve Gregory

Mon, 27 Oct 2008 13:19:21 -0500

Re: Throughhole Equipment Training

Raye Rivera

Tue, 28 Oct 2008 09:36:17 -0500

Re: Throughhole Equipment Training

Ken Bloomquist

Tue, 28 Oct 2008 10:04:47 -0800

Underfill, Cause

Tan Geok Ang

Thu, 23 Oct 2008 09:29:47 +0800

Re: Underfill, Cause

Werner Engelmaier /*

Fri, 24 Oct 2008 10:31:35 -0400

Re: Underfill, Cause

Werner Engelmaier /*

Sun, 26 Oct 2008 14:06:21 EDT

Re: Underfill, Cause

Tan Geok Ang

Tue, 28 Oct 2008 11:59:50 +0800

Upcoming Power Conversion Conference Featuring New Industry Standard

Michelle Michelotti

Mon, 6 Oct 2008 13:58:49 -0500

Vapor Phase Soldering - The way Forward?

Eric CHRISTISON

Thu, 16 Oct 2008 13:57:27 +0100

Brian Ellis

Thu, 16 Oct 2008 16:28:09 +0300

Stadem, Richard D.

Thu, 16 Oct 2008 08:44:05 -0500

Lee Whiteman

Thu, 16 Oct 2008 14:25:18 -0400

Werner Engelmaier /*

Thu, 16 Oct 2008 15:28:44 -0400

Lee parker

Thu, 16 Oct 2008 15:39:59 -0400

Wave soldering temperature profile question

Stadem, Richard D.

Thu, 16 Oct 2008 14:43:48 -0500

- bogert

Sat, 4 Oct 2008 07:36:59 -0400

Re: Wave soldering temperature profile question

Werner Engelmaier /*

Sat, 4 Oct 2008 10:36:35 -0400

Re: Wave soldering temperature profile question

Alan Kreplick

Mon, 6 Oct 2008 06:48:15 -0400

Re: Wave soldering temperature profile question

Phillip Bavaro

Mon, 6 Oct 2008 09:38:28 -0700

What is NADCAP ?

Re: What is NADCAP ?

Whittaker, Dewey (EHCOE)

Mon, 6 Oct 2008 10:38:22 -0700

Re: What is NADCAP ?

Inge

Mon, 6 Oct 2008 12:54:56 -0700

Re: What is NADCAP ?

Mike Fenner

Thu, 9 Oct 2008 12:56:31 +0100

[LF] Vapor Phase Soldering

FW: [LF] Vapor Phase Soldering

Stadem, Richard D.

Wed, 15 Oct 2008 10:37:49 -0500

Stadem, Richard D.

Wed, 15 Oct 2008 10:48:47 -0500

Grunde Gjertsen

Thu, 16 Oct 2008 07:29:54 +0200

Stadem, Richard D.

Thu, 16 Oct 2008 08:03:02 -0500

Werner Engelmaier /*

Thu, 16 Oct 2008 11:04:01 -0400

Grunde Gjertsen

Fri, 17 Oct 2008 12:55:19 +0200

Inge

Fri, 17 Oct 2008 13:11:17 -0700