LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Steve Hodge

Tue, 17 Jan 2006 14:44:40 -0700

Werner Engelmaier

Tue, 17 Jan 2006 17:11:22 EST

Eddie Rocha

Tue, 17 Jan 2006 15:59:57 -0700

Werner Engelmaier

Tue, 17 Jan 2006 19:56:22 EST

<List>[TN] Au & Photoresist Thickness Measurement

John Parsons

Wed, 18 Jan 2006 08:06:10 -0800

Re: <List>[TN] Au & Photoresist Thickness Measurement

Steve Hodge

Tue, 31 Jan 2006 10:12:09 -0700

<List>[TN] Panelization of backplanes

Steve Hodge

Thu, 19 Jan 2006 13:39:34 -0700

Jason Gregory

Thu, 19 Jan 2006 14:52:19 -0600

Jerry Dengler

Thu, 19 Jan 2006 16:06:56 -0500

Ted Tontis

Thu, 19 Jan 2006 15:36:57 -0600

Tempea, Ioan

Fri, 20 Jan 2006 07:55:57 -0500

Dehoyos, Ramon

Fri, 20 Jan 2006 09:00:00 -0500

Any comments?

Genny Gibbard

Thu, 12 Jan 2006 10:13:11 -0600

John Burke

Thu, 12 Jan 2006 08:24:32 -0800

Stadem, Richard D.

Thu, 12 Jan 2006 13:01:41 -0600

Joel Alexander

Thu, 12 Jan 2006 16:19:10 -0500

Kane, Amol (349)

Thu, 12 Jan 2006 16:21:53 -0500

Au & Photoresist Thickness Measurement

Joel Alexander

Thu, 12 Jan 2006 16:57:21 -0500

Michael McMonagle

Tue, 31 Jan 2006 10:46:28 -0600

Re: Au & Photoresist Thickness Measurement

Ted Tontis

Tue, 31 Jan 2006 11:16:53 -0600

Re: Au & Photoresist Thickness Measurement

Happy Holden

Tue, 31 Jan 2006 12:36:36 -0500

baking moisture sensitive components

Bob Walker

Tue, 24 Jan 2006 11:12:15 EST

Werner Engelmaier

Tue, 24 Jan 2006 11:22:06 EST

Stadem, Richard D.

Tue, 24 Jan 2006 10:38:08 -0600

Stadem, Richard D.

Tue, 24 Jan 2006 10:41:17 -0600

Stephen Gregory

Tue, 24 Jan 2006 11:03:45 -0600

Yannick Brisson

Tue, 24 Jan 2006 12:02:20 -0500

Werner Engelmaier

Tue, 24 Jan 2006 13:08:35 EST

Dehoyos, Ramon

Tue, 24 Jan 2006 14:04:02 -0500

Kane, Amol (349)

Tue, 24 Jan 2006 15:03:10 -0500

Tempea, Ioan

Tue, 24 Jan 2006 15:56:45 -0500

Re: Bin/ Tote Aqueous Washer

Werner Engelmaier

Tue, 24 Jan 2006 16:41:33 EST

Bin/ Tote Aqueous Washer

Chris Schaefer

Wed, 4 Jan 2006 10:30:55 -0600

Roach, David

Wed, 4 Jan 2006 10:48:03 -0600

Re: Bin/ Tote Aqueous Washer

Schaefer, Chris

Wed, 4 Jan 2006 10:54:58 -0600

Bob K Veale/Cleveland/RA/Rockwell is out of the office.

Bob K Veale

Fri, 13 Jan 2006 00:20:10 -0600

Building a lead free board (with PB free BGA with eutectic solder

Taylor, Royce

Thu, 19 Jan 2006 07:11:18 -0600

Re: Building a lead free board (with PB free BGA with eutectic solder

Kane, Amol (349)

Thu, 19 Jan 2006 08:25:18 -0500

Re: Building a lead free board (with PB free BGA with eutectic solder

Stadem, Richard D.

Thu, 19 Jan 2006 08:08:35 -0600

Compliance Pins

Victor G. Hernandez

Fri, 6 Jan 2006 11:52:36 -0600

Re: Compliance Pins

Mattson, Jeffrey

Fri, 6 Jan 2006 13:14:54 -0500

Re: Compliance Pins

Brad Saunders

Fri, 6 Jan 2006 13:45:07 -0500

Conforma Coat (Urethane) & bubbles

Kelly Morris

Tue, 24 Jan 2006 09:25:25 -0600

Phil Nutting

Tue, 24 Jan 2006 10:29:29 -0500

Douglas O. Pauls

Tue, 24 Jan 2006 09:34:07 -0600

Blair K. Hogg

Tue, 24 Jan 2006 07:39:44 -0800

Blomberg, Rainer (FL51)

Tue, 24 Jan 2006 08:54:33 -0700

Kane, Amol (349)

Tue, 24 Jan 2006 11:03:07 -0500

Kane, Amol (349)

Tue, 24 Jan 2006 11:04:28 -0500

Kelly Morris

Tue, 24 Jan 2006 12:22:42 -0600

John Burke

Tue, 24 Jan 2006 10:29:22 -0800

Conformal Coat (Urethane) & bubbles

George Carroll

Tue, 24 Jan 2006 16:33:48 -0500

Re: Conformal Coat (Urethane) & bubbles

Bloomquist, Ken

Tue, 24 Jan 2006 12:15:19 -0800

Re: Conformal Coat (Urethane) & bubbles

Dehoyos, Ramon

Tue, 24 Jan 2006 16:33:37 -0500

Re: Conformal Coat (Urethane) & bubbles

Joseph H. Smith

Wed, 25 Jan 2006 10:47:19 -0500

Conformal Coatings

Babcock John

Fri, 6 Jan 2006 09:58:08 -0800

Mattson, Jeffrey

Fri, 6 Jan 2006 13:17:28 -0500

Kane, Amol (349)

Fri, 6 Jan 2006 13:20:32 -0500

Brad Saunders

Fri, 6 Jan 2006 13:55:44 -0500

Kane, Joseph E (US SSA)

Fri, 6 Jan 2006 15:34:22 -0500

Definition

Douglas O. Pauls

Fri, 20 Jan 2006 16:54:43 -0600

Dave Dixon

Fri, 20 Jan 2006 16:58:59 -0600

John Burke

Fri, 20 Jan 2006 15:05:18 -0800

Crepeau, Phil (Space Technology)

Fri, 20 Jan 2006 15:17:14 -0800

Steve Mikell

Sun, 22 Jan 2006 07:52:04 +0700

Joyce Koo

Mon, 23 Jan 2006 09:18:28 -0500

Brian Ellis

Mon, 23 Jan 2006 17:23:26 +0200

Lance Mayes

Mon, 23 Jan 2006 08:39:28 -0700

Douglas O. Pauls

Mon, 23 Jan 2006 10:03:23 -0600

John Burke

Mon, 23 Jan 2006 08:42:47 -0800

Stephen Gregory

Mon, 23 Jan 2006 13:10:35 -0600

Steve Mikell

Tue, 24 Jan 2006 04:50:37 +0700

Graham Naisbitt

Mon, 23 Jan 2006 22:15:38 +0000

Douglas O. Pauls

Tue, 24 Jan 2006 13:33:32 -0600

Joe Russeau

Tue, 24 Jan 2006 15:07:06 -0500

Whittaker, Dewey (AZ75)

Thu, 26 Jan 2006 14:22:31 -0700

Douglas O. Pauls

Thu, 26 Jan 2006 16:42:35 -0600

John Burke

Thu, 26 Jan 2006 14:57:03 -0800

Douglas O. Pauls

Thu, 26 Jan 2006 17:03:43 -0600

Dissolution rates and solder paste selection

Whittaker, Dewey (AZ75)

Fri, 27 Jan 2006 07:21:01 -0700

DIP pic

Werner Engelmaier

Tue, 3 Jan 2006 17:37:24 EST

Re: DIP pic

John Burke

Tue, 3 Jan 2006 14:45:09 -0800

Re: DIP pic

Stephen Gregory

Thu, 5 Jan 2006 09:52:40 -0600

Ivanoe Pedruzzi

Mon, 16 Jan 2006 11:38:00 +0100

Wenger, George M.

Mon, 16 Jan 2006 12:49:24 -0500

David D. Hillman

Mon, 16 Jan 2006 11:56:24 -0600

Werner Engelmaier

Mon, 16 Jan 2006 12:58:56 EST

Drill and plated hole callouts

Stadem, Richard D.

Mon, 16 Jan 2006 15:24:23 -0600

Bob Wilson

Mon, 16 Jan 2006 15:05:49 -0800

Franklin D Asbell

Mon, 16 Jan 2006 17:49:44 -0600

Werner Engelmaier

Mon, 16 Jan 2006 20:41:08 EST

Fox, Ian

Tue, 17 Jan 2006 08:25:42 -0000

McGlaughlin, Jeffrey A

Tue, 17 Jan 2006 07:20:59 -0500

Garry Morand

Tue, 17 Jan 2006 08:39:22 -0500

Dwight Mattix

Tue, 17 Jan 2006 07:22:58 -0800

Stadem, Richard D.

Tue, 17 Jan 2006 09:32:26 -0600

Ofer Cohen

Tue, 17 Jan 2006 18:37:26 +0200

Eddie Rocha

Tue, 17 Jan 2006 11:34:28 -0700

Werner Engelmaier

Tue, 17 Jan 2006 15:45:31 EST

Lee parker

Tue, 17 Jan 2006 16:32:31 -0500

Werner Engelmaier

Tue, 17 Jan 2006 16:40:23 EST

David Ricketts

Tue, 17 Jan 2006 14:59:36 -0800

Dwight Mattix

Tue, 17 Jan 2006 15:34:30 -0800

Werner Engelmaier

Tue, 17 Jan 2006 20:08:18 EST

Re: ENEPIG and LF PROCESS

Ofer Cohen

Wed, 18 Jan 2006 11:07:11 +0200

ENEPIG and LF PROCESS

George Milad

Fri, 27 Jan 2006 15:22:44 EST

enig bad board

sumxp

Fri, 13 Jan 2006 09:48:22 -0600

Werner Engelmaier

Fri, 13 Jan 2006 10:56:55 EST

John Burke

Fri, 13 Jan 2006 08:51:59 -0800

Lee Parker

Fri, 13 Jan 2006 12:34:59 -0500

Sumxplore

Sat, 14 Jan 2006 13:54:49 +0800

Werner Engelmaier

Sat, 14 Jan 2006 08:25:35 EST

Lee Parker

Sat, 14 Jan 2006 11:31:09 -0500

Stadem, Richard D.

Mon, 16 Jan 2006 07:59:27 -0600

Ivanoe Pedruzzi

Tue, 17 Jan 2006 10:13:06 +0100

Fox, Ian

Tue, 17 Jan 2006 09:17:23 -0000

glass photo tools need help

Werner Engelmaier

Tue, 17 Jan 2006 07:59:39 EST

Anil Kher

Thu, 12 Jan 2006 12:28:07 +0530

Gold over Tin

Franklin Asbell

Thu, 5 Jan 2006 12:57:44 -0600

Happy Holden

Thu, 5 Jan 2006 14:06:58 -0500

jose

Thu, 5 Jan 2006 14:47:42 -0800

Brian Ellis

Fri, 6 Jan 2006 11:47:03 +0200

Creswick, Steven

Fri, 6 Jan 2006 06:00:30 -0500

handling Thiourea perhaps be assisted by these guys

Mike Fenner

Mon, 9 Jan 2006 10:08:57 -0000

MYEMAIL

Fri, 6 Jan 2006 22:27:24 +0200

Hard gold question

Bev Christian

Thu, 26 Jan 2006 11:59:03 -0500

Heller 1500W Oven

Ron Peeler

Thu, 26 Jan 2006 12:08:31 -0500

Re: Heller 1500W Oven

Taylor, Royce

Thu, 26 Jan 2006 11:49:29 -0600

Re: Heller 1500W Oven

Ron Peeler

Thu, 26 Jan 2006 12:59:13 -0500

Re: Heller 1500W Oven

Dehoyos, Ramon

Thu, 26 Jan 2006 13:44:46 -0500

Hot bar/Laser soldering of QFPs

Gervascio, Thomas

Wed, 11 Jan 2006 17:24:11 -0500

Re: Hot bar/Laser soldering of QFPs

Wed, 11 Jan 2006 23:13:49 EST

How to use XRF?

Tempea, Ioan

Fri, 6 Jan 2006 09:39:21 -0500

[log in to unmask]

Fri, 6 Jan 2006 10:04:47 -0500

Joyce Koo

Fri, 6 Jan 2006 13:09:38 -0500

Kane, Amol (349)

Fri, 6 Jan 2006 13:22:38 -0500

Sara Rice

Fri, 6 Jan 2006 13:40:57 -0500

Re: Humidity Cure Chambers

Franklin Asbell

Fri, 6 Jan 2006 13:18:37 -0600

Humidity Cure Chambers

Kevin Glidden

Mon, 23 Jan 2006 09:39:39 -0500

Joyce Koo

Mon, 23 Jan 2006 09:59:33 -0500

Re: Humidity Cure Chambers

Brian Ellis

Mon, 23 Jan 2006 17:42:47 +0200

Re: Humidity Cure Chambers

Dehoyos, Ramon

Mon, 23 Jan 2006 13:23:41 -0500

Humiseal conformal coating

George Carroll

Wed, 25 Jan 2006 09:45:44 -0500

Re: Humiseal conformal coating

Mattson, Jeffrey

Wed, 25 Jan 2006 09:52:04 -0500

Re: Humiseal conformal coating

Kane, Amol (349)

Wed, 25 Jan 2006 10:49:52 -0500

ImAg Flaking away

Richard Kraszewski

Wed, 18 Jan 2006 11:20:20 -0500

Stadem, Richard D.

Wed, 18 Jan 2006 10:23:09 -0600

Richard Kraszewski

Wed, 18 Jan 2006 11:24:12 -0500

Wenger, George M.

Wed, 18 Jan 2006 11:30:33 -0500

R Sedlak

Wed, 18 Jan 2006 09:03:19 -0800

Image transfer

Rodney Miller

Mon, 9 Jan 2006 11:43:23 -0600

John Burke

Mon, 9 Jan 2006 09:49:43 -0800

Davis, Larry

Mon, 9 Jan 2006 10:10:45 -0800

Michael McMonagle

Mon, 9 Jan 2006 12:29:01 -0600

Immersion Gold and LF PROCESS

Rodney Miller

Mon, 9 Jan 2006 15:09:25 -0600

Victor G. Hernandez

Tue, 24 Jan 2006 11:49:39 -0600

Werner Engelmaier

Tue, 24 Jan 2006 13:18:09 EST

Gerard O'Brien

Tue, 24 Jan 2006 13:18:26 -0500

David D. Hillman

Tue, 24 Jan 2006 12:52:09 -0600

Tue, 24 Jan 2006 19:26:35 EST

George Milad

Tue, 24 Jan 2006 21:46:40 EST

Stadem, Richard D.

Wed, 25 Jan 2006 06:58:16 -0600

David D. Hillman

Wed, 25 Jan 2006 08:05:35 -0600

Wed, 25 Jan 2006 20:37:55 EST

Ivanoe Pedruzzi

Thu, 26 Jan 2006 10:41:01 +0100

Stadem, Richard D.

Thu, 26 Jan 2006 07:24:23 -0600

Jeffrey Bush

Thu, 26 Jan 2006 10:12:26 -0500

Dwight Mattix

Thu, 26 Jan 2006 11:52:02 -0800

George Milad

Thu, 26 Jan 2006 17:28:10 EST

Impedance/ Diff pairs/ layer stack up calculator?

Victor G. Hernandez

Fri, 27 Jan 2006 06:01:46 -0600

Brooks,Bill

Fri, 27 Jan 2006 15:25:27 -0800

Re: Impedance/ Diff pairs/ layer stack up calculator?

Happy Holden

Sat, 28 Jan 2006 14:48:05 -0500

Laminate material

John Burke

Fri, 20 Jan 2006 15:25:43 -0800

Re: Laminate material

Happy Holden

Sat, 21 Jan 2006 09:39:50 -0500

Re: Laminate material

Jeffrey Bush

Mon, 23 Jan 2006 08:49:26 -0500

Re: Laminate material

John Burke

Mon, 23 Jan 2006 14:12:59 -0800

Large SMT physical failure prevention

Phil Nutting

Tue, 31 Jan 2006 11:31:53 -0500

Babcock John

Tue, 31 Jan 2006 08:39:43 -0800

John Burris

Tue, 31 Jan 2006 11:57:00 -0500

Tempea, Ioan

Tue, 31 Jan 2006 11:56:24 -0500

Kerry McMullen

Tue, 31 Jan 2006 12:02:05 -0500

John Maxwell

Tue, 31 Jan 2006 09:42:05 -0800

Re: LGA Package reliability

Stadem, Richard D.

Tue, 31 Jan 2006 12:10:19 -0600

Lavenir Question

Mon, 23 Jan 2006 12:10:54 EST

Lead Free

Dehoyos, Ramon

Tue, 31 Jan 2006 10:42:50 -0500

LGA Package reliability

Zilber Gil

Tue, 10 Jan 2006 19:55:57 +0200

Werner Engelmaier

Tue, 10 Jan 2006 13:23:32 EST

Re: LGA Package reliability

Stadem, Richard D.

Tue, 10 Jan 2006 12:46:04 -0600

LPI - matte vs. gloss or semi-gloss

Chris Ball

Mon, 23 Jan 2006 13:02:41 -0500

Ted Tontis

Mon, 23 Jan 2006 12:30:11 -0600

Lee parker

Mon, 23 Jan 2006 13:30:59 -0500

Chris Ball

Tue, 24 Jan 2006 07:42:33 -0500

Manual conformal coat dipping process

Jeffrey Bush

Tue, 24 Jan 2006 08:54:46 -0500

lpi soldermask

Crepeau, Phil (Space Technology)

Mon, 30 Jan 2006 16:32:48 -0800

Re: lpi soldermask

Jeffrey Bush

Tue, 31 Jan 2006 08:53:15 -0500

Re: lpi soldermask

R Sedlak

Tue, 31 Jan 2006 07:09:25 -0800

Re: lpi soldermask

Crepeau, Phil (Space Technology)

Tue, 31 Jan 2006 07:48:28 -0800

Joseph H. Smith

Tue, 10 Jan 2006 16:40:54 -0500

McGee, Mike (MN51)

Tue, 10 Jan 2006 15:55:14 -0600

Joseph H. Smith

Tue, 10 Jan 2006 17:05:34 -0500

Joseph H. Smith

Tue, 10 Jan 2006 17:08:50 -0500

Joel Alexander

Tue, 10 Jan 2006 17:12:51 -0500

Brian Ellis

Wed, 11 Jan 2006 10:54:33 +0200

McGee, Mike (MN51)

Wed, 11 Jan 2006 07:46:43 -0600

Graham Naisbitt

Wed, 11 Jan 2006 13:59:56 +0000

Graham Naisbitt

Wed, 11 Jan 2006 14:13:42 +0000

Douglas O. Pauls

Wed, 11 Jan 2006 10:28:28 -0600

Need an edge card connector - odd size

Joseph H. Smith

Thu, 12 Jan 2006 11:05:51 -0500

Mil Spec Downloads

Re: Mil Spec Downloads

Bremer, Gary

Tue, 3 Jan 2006 07:54:10 -0800

Paresh Limaye

Mon, 16 Jan 2006 09:00:44 -0800

non-corrosive detergent

Joyce Koo

Mon, 2 Jan 2006 11:30:45 -0500

Re: non-corrosive detergent

stephen gregory

Mon, 2 Jan 2006 17:04:33 -0800

Re: non-corrosive detergent

Russell Burdick

Tue, 3 Jan 2006 11:25:05 -0700

NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Joe Fjelstad

Wed, 18 Jan 2006 15:46:19 EST

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Whittaker, Dewey (AZ75)

Wed, 18 Jan 2006 14:05:08 -0700

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

John Burke

Wed, 18 Jan 2006 13:14:43 -0800

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Whittaker, Dewey (AZ75)

Wed, 18 Jan 2006 14:23:50 -0700

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Jeffrey Bush

Wed, 18 Jan 2006 16:43:25 -0500

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

John Burke

Wed, 18 Jan 2006 16:11:34 -0800

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Dehoyos, Ramon

Thu, 19 Jan 2006 08:35:35 -0500

Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)

Dehoyos, Ramon

Thu, 19 Jan 2006 08:38:53 -0500

NTC-APEX/Expo Savings Deadlines Approaching

IPC Mail

Thu, 5 Jan 2006 17:01:07 -0600

Older Blue-M ovens.

Taylor, Royce

Fri, 27 Jan 2006 08:22:07 -0600

Re: Older Blue-M ovens.

Michael McMonagle

Fri, 27 Jan 2006 08:35:20 -0600

Re: Older Blue-M ovens.

Frederick Miller

Fri, 27 Jan 2006 09:53:52 -0500

Re: Older Blue-M ovens.

Joe Russeau

Fri, 27 Jan 2006 09:56:08 -0500

Optimum dia of thru-holes

Jon McDowell

Mon, 30 Jan 2006 12:08:16 -0700

Stadem, Richard D.

Mon, 30 Jan 2006 14:48:30 -0600

Dehoyos, Ramon

Mon, 30 Jan 2006 16:08:13 -0500

Happy Holden

Mon, 30 Jan 2006 16:10:56 -0500

Ted Tontis

Mon, 30 Jan 2006 15:44:51 -0600

Pad Damage, Leave it alone, or fix it?

Dehoyos, Ramon

Tue, 31 Jan 2006 08:16:36 -0500

Stephen Gregory

Wed, 25 Jan 2006 14:09:22 -0600

Kerry McMullen

Wed, 25 Jan 2006 15:17:36 -0500

Wenger, George M.

Wed, 25 Jan 2006 15:18:01 -0500

Stephen Gregory

Wed, 25 Jan 2006 14:23:31 -0600

Joel Mearig

Wed, 25 Jan 2006 12:47:14 -0800

Jeffrey Bush

Wed, 25 Jan 2006 15:50:14 -0500

Stadem, Richard D.

Wed, 25 Jan 2006 14:56:36 -0600

Kerry McMullen

Wed, 25 Jan 2006 16:11:11 -0500

Dehoyos, Ramon

Wed, 25 Jan 2006 16:26:35 -0500

Bloomquist, Ken

Wed, 25 Jan 2006 13:37:22 -0800

Panel Optimization Software / Free or Purchase

bob wettermann

Thu, 26 Jan 2006 11:03:28 -0800

Re: Panel Optimization Software / Free or Purchase

Terry Kozlyk

Fri, 6 Jan 2006 08:31:58 -0700

Panelization of backplanes

Tempea, Ioan

Thu, 19 Jan 2006 15:37:58 -0500

Re: Panelization of backplanes

Gerald Gagnon

Sat, 21 Jan 2006 13:02:06 -0500

Re: Panelization of backplanes

Dehoyos, Ramon

Mon, 23 Jan 2006 08:23:21 -0500

Pansert AVKII through hole diameter?

Jon McDowell

Fri, 27 Jan 2006 16:18:40 -0700

Jon McDowell

Mon, 30 Jan 2006 08:00:46 -0700

Dehoyos, Ramon

Mon, 30 Jan 2006 10:12:59 -0500

John Burke

Mon, 30 Jan 2006 10:30:59 -0800

Re: Paste In-Hole process

Chris Ball

Mon, 30 Jan 2006 16:31:20 -0500

Paste In-Hole process

Selva Suganthi

Fri, 6 Jan 2006 16:50:48 +0530

Yordan Venev

Fri, 6 Jan 2006 13:35:27 +0200

Re: Paste In-Hole process

Michael McMonagle

Fri, 6 Jan 2006 07:59:53 -0600

Re: Paste In-Hole process

Bill Coleman

Fri, 6 Jan 2006 07:25:43 -0700

Pick and Place machine

Barry Gallegos

Mon, 9 Jan 2006 07:12:37 -0700

Re: Pick and Place machine

Ahne Oosterhof

Tue, 10 Jan 2006 08:09:30 -0800

Pictures posted...

Stephen Gregory

Wed, 4 Jan 2006 08:05:02 -0600

Plugged via issue

Wee Mei

Thu, 19 Jan 2006 11:45:48 +0800

Re: Plugged via issue

Jeffrey Bush

Thu, 19 Jan 2006 13:35:55 -0500

Re: Plugged via issue

Dehoyos, Ramon

Thu, 19 Jan 2006 13:46:16 -0500

Prepping Stranded Litz wire for soldering...

Stephen Gregory

Mon, 30 Jan 2006 10:28:14 -0600

Guy Ramsey

Mon, 30 Jan 2006 11:57:01 -0500

Mike Fenner

Mon, 30 Jan 2006 17:01:42 -0000

Ahne Oosterhof

Mon, 30 Jan 2006 09:21:12 -0800

Dehoyos, Ramon

Mon, 30 Jan 2006 12:39:37 -0500

Press Fit Pins / Compliance Pins

Stadem, Richard D.

Mon, 30 Jan 2006 12:55:54 -0600

Victor G. Hernandez

Tue, 10 Jan 2006 10:06:24 -0600

Re: Press Fit Pins / Compliance Pins

Mattson, Jeffrey

Tue, 10 Jan 2006 11:49:04 -0500

Re: Press Fit Pins / Compliance Pins

Stadem, Richard D.

Tue, 10 Jan 2006 12:26:26 -0600

Re: Press Fit Pins / Compliance Pins

Brad Saunders

Tue, 10 Jan 2006 23:34:15 -0500

PWB Buried/Blind Via Technology

Victor G. Hernandez

Mon, 16 Jan 2006 08:17:04 -0600

Re: PWB Buried/Blind Via Technology

Happy Holden

Mon, 16 Jan 2006 12:55:38 -0500

PWB SMT pad retention

Stadem, Richard D.

Thu, 19 Jan 2006 10:42:41 -0600

Sherif Refaat

Thu, 19 Jan 2006 12:31:23 -0500

Jeffrey Bush

Thu, 19 Jan 2006 13:43:24 -0500

Stadem, Richard D.

Thu, 19 Jan 2006 16:08:42 -0600

John Burke

Thu, 19 Jan 2006 14:35:12 -0800

Jeffrey Bush

Fri, 20 Jan 2006 08:48:29 -0500

Fri, 20 Jan 2006 17:27:22 EST

Fri, 20 Jan 2006 17:36:14 EST

Wee Mei

Fri, 27 Jan 2006 07:25:11 +0800

Question about expoxies

John Foster

Thu, 19 Jan 2006 08:31:32 -0800

Kane, Amol (349)

Thu, 19 Jan 2006 11:40:44 -0500

Scott B. Westheimer

Thu, 19 Jan 2006 11:50:52 -0500

R Sedlak

Thu, 19 Jan 2006 10:17:14 -0800

Phil Nutting

Thu, 19 Jan 2006 13:32:32 -0500

Joyce Koo

Thu, 19 Jan 2006 13:44:43 -0500

Re: Rocha Laminate Voids..

Joe Russeau

Thu, 19 Jan 2006 14:37:01 -0500

Rocha Laminate Voids..

Susan Mansilla

Wed, 4 Jan 2006 09:24:09 EST

Eddie Rocha

Wed, 4 Jan 2006 17:11:19 -0700

Re: Rocha Laminate Voids..

Susan Mansilla

Wed, 4 Jan 2006 20:15:32 EST

Re: Rocha Laminate Voids..

Eddie Rocha

Thu, 5 Jan 2006 09:21:29 -0700

RoHS board finish

Robert Walker

Wed, 18 Jan 2006 12:39:06 EST

John Burke

Wed, 18 Jan 2006 09:55:02 -0800

David D. Hillman

Wed, 18 Jan 2006 11:54:38 -0600

Genny Gibbard

Wed, 18 Jan 2006 11:58:31 -0600

Robert Walker

Wed, 18 Jan 2006 13:21:31 EST

Barmuta, Mike

Wed, 18 Jan 2006 10:43:49 -0800

Stadem, Richard D.

Wed, 18 Jan 2006 13:25:19 -0600

Stadem, Richard D.

Wed, 18 Jan 2006 13:26:02 -0600

John Burke

Wed, 18 Jan 2006 11:50:24 -0800

Kane, Amol (349)

Wed, 18 Jan 2006 14:48:45 -0500

Kane, Amol (349)

Wed, 18 Jan 2006 14:53:57 -0500

Werner Engelmaier

Wed, 18 Jan 2006 15:00:07 EST

Wenger, George M.

Wed, 18 Jan 2006 15:08:13 -0500

Dehoyos, Ramon

Wed, 18 Jan 2006 15:14:44 -0500

Werner Engelmaier

Wed, 18 Jan 2006 15:18:54 EST

Werner Engelmaier

Wed, 18 Jan 2006 15:21:24 EST

Dehoyos, Ramon

Wed, 18 Jan 2006 15:32:12 -0500

Kane, Amol (349)

Wed, 18 Jan 2006 15:31:44 -0500

Dehoyos, Ramon

Wed, 18 Jan 2006 15:41:39 -0500

Werner Engelmaier

Wed, 18 Jan 2006 15:39:45 EST

Jeffrey Bush

Wed, 18 Jan 2006 16:39:32 -0500

RoHS data compliance "how to" article

Gerald Gagnon

Sat, 21 Jan 2006 13:49:46 -0500

John Burke

Tue, 31 Jan 2006 09:43:28 -0800

Seeking Information on Test for Pb content in SnPb finis hed component leads

Re: Seeking Information on Test for Pb content in SnPb finis hed component leads

Blomberg, Rainer (FL51)

Thu, 5 Jan 2006 08:09:54 -0700

Re: Seeking Information on Test for Pb content in SnPb finis hed component leads

Victor G. Hernandez

Thu, 5 Jan 2006 09:23:09 -0600

Seeking Information on Test for Pb content in SnPb finished component leads

- Bogert

Wed, 4 Jan 2006 19:02:20 -0500

Re: Seeking Information on Test for Pb content in SnPb finished component leads

Stadem, Richard

Thu, 5 Jan 2006 07:13:21 -0600

SMEMA to SMP1

Graham Collins

Tue, 10 Jan 2006 12:45:19 -0500

Re: SMEMA to SMP1

Jerry Dengler

Tue, 10 Jan 2006 13:20:01 -0500

SMT Connector Assembly Question

Terry Kozlyk

Thu, 5 Jan 2006 09:33:47 -0700

Re: SMT Connector Assembly Question

Yordan Venev

Fri, 6 Jan 2006 13:29:43 +0200

Re: SMT Connector Assembly Question

Terry Kozlyk

Fri, 6 Jan 2006 08:20:03 -0700

Solder "Stop the Wicking" Plugs

David D. Hillman

Tue, 3 Jan 2006 16:31:21 -0600

Bev Christian

Wed, 4 Jan 2006 08:38:08 -0500

David D. Hillman

Wed, 4 Jan 2006 07:58:25 -0600

Michael McMonagle

Wed, 4 Jan 2006 08:13:59 -0600

David D. Hillman

Wed, 4 Jan 2006 08:25:50 -0600

Michael McMonagle

Wed, 4 Jan 2006 08:43:26 -0600

Jason Gregory

Wed, 4 Jan 2006 08:48:40 -0600

Stephen Gregory

Wed, 4 Jan 2006 09:15:14 -0600

Solder acceptance criteria for non-electronic connections

David D. Hillman

Wed, 4 Jan 2006 13:05:36 -0600

Tom Moore

Mon, 9 Jan 2006 15:51:11 -0600

Solder Paste

Jose Marroquin

Fri, 13 Jan 2006 13:57:04 -0800

Re: Solder Paste

Bev Christian

Fri, 13 Jan 2006 17:06:26 -0500

Solder performs

Re: Solder performs

Ted Tontis

Fri, 20 Jan 2006 15:19:18 -0600

Re: Solder performs

Mike Fenner

Wed, 25 Jan 2006 08:37:23 -0000

Solder preforms

Martin Butcher

Fri, 20 Jan 2006 11:08:27 -0800

Re: Solder preforms

Stephen Gregory

Fri, 20 Jan 2006 14:18:07 -0600

Solder Wettability Problem

Wee Mei

Mon, 9 Jan 2006 09:32:34 +0800

Re: Solder Wettability Problem

Brian Ellis

Mon, 9 Jan 2006 10:35:32 +0200

Re: Solder Wettability Problem

Victor G. Hernandez

Mon, 9 Jan 2006 07:01:54 -0600

Re: Solder Wettability Problem

Stadem, Richard D.

Mon, 9 Jan 2006 08:16:22 -0600

Soldered J lead components vs socketed

Ron Fowler

Fri, 27 Jan 2006 14:46:06 -0500

Re: Soldered J lead components vs socketed

Dehoyos, Ramon

Fri, 27 Jan 2006 15:24:39 -0500

Re: Soldered J lead components vs socketed

- Bogert

Sat, 28 Jan 2006 12:29:57 -0500

Soldering matte tin over nickel plating

John Burris

Thu, 19 Jan 2006 09:54:07 -0500

David D. Hillman

Thu, 19 Jan 2006 16:30:22 -0600

Leo Higgins

Thu, 19 Jan 2006 14:45:22 -0800

Douglas O. Pauls

Thu, 19 Jan 2006 17:01:14 -0600

John Burke

Thu, 19 Jan 2006 15:16:03 -0800

Soldering matte tin over nickel plating NTC

Whittaker, Dewey (AZ75)

Fri, 20 Jan 2006 07:01:21 -0700

David D. Hillman

Thu, 19 Jan 2006 17:12:39 -0600

Sauer, Steve (Xetron)

Fri, 20 Jan 2006 07:40:29 -0500

John Burris

Fri, 20 Jan 2006 08:34:34 -0500

Whittaker, Dewey (AZ75)

Fri, 20 Jan 2006 06:50:31 -0700

John Burke

Fri, 20 Jan 2006 08:54:24 -0800

Soldering Weights

Todd, Richard

Wed, 25 Jan 2006 10:24:03 -0500

Michael McMonagle

Wed, 25 Jan 2006 10:30:08 -0600

Todd, Richard

Wed, 25 Jan 2006 11:30:25 -0500

Eric CHRISTISON

Wed, 25 Jan 2006 16:54:31 -0000

Bremer, Gary

Wed, 25 Jan 2006 09:00:42 -0800

Schaefer, Chris

Wed, 25 Jan 2006 11:14:37 -0600

Bloomquist, Ken

Wed, 25 Jan 2006 09:38:21 -0800

Gervascio, Thomas

Wed, 25 Jan 2006 12:47:58 -0500

Schaefer, Chris

Wed, 25 Jan 2006 12:03:19 -0600

Michael McMonagle

Wed, 25 Jan 2006 11:25:13 -0600

Jim Gleason

Wed, 25 Jan 2006 21:04:37 -0600

Juan T. Marugán

Thu, 26 Jan 2006 00:56:03 -0600

Soldermask Tolerance

Brian Pulis

Wed, 25 Jan 2006 13:16:36 +0100

Franklin D Asbell

Wed, 25 Jan 2006 07:28:15 -0600

Jeffrey Bush

Wed, 25 Jan 2006 08:22:22 -0500

Lee parker

Wed, 25 Jan 2006 08:56:36 -0500

SV: [TN] SMT Connector Assembly Question

Franklin D Asbell

Wed, 25 Jan 2006 08:34:47 -0600

sulfur free paper

Kathy

Mon, 9 Jan 2006 13:41:36 -0800

Re: sulfur free paper

John Burke

Mon, 9 Jan 2006 13:57:45 -0800

Re: sulfur free paper

Eddie Rocha

Mon, 9 Jan 2006 15:28:52 -0700

Re: sulfur free paper

Jeffrey Bush

Tue, 10 Jan 2006 07:52:33 -0500

gina hernefjord

Wed, 11 Jan 2006 17:19:37 +0100

SVS 8200

Efendy Wijaya

Thu, 26 Jan 2006 16:58:43 -0800

Re: SVS 8200

Stadem, Richard D.

Mon, 30 Jan 2006 07:12:38 -0600

Swaged hardware on MCPCB

Kevin Glidden

Mon, 9 Jan 2006 11:52:56 -0500

System International Units versus Imperial English units ??

Re: System International Units versus Imperial English units ??

Todd, Richard

Wed, 11 Jan 2006 08:30:59 -0500

Re: System International Units versus Imperial English units ??

Jack Crawford

Wed, 11 Jan 2006 16:23:26 -0600

System International Units versus Imperial English units??

Rick Thompson

Tue, 10 Jan 2006 12:03:23 -0800

Re: System International Units versus Imperial English units??

Joe Russeau

Tue, 10 Jan 2006 15:21:48 -0500

Re: System International Units versus Imperial English units??

Darrel Therriault

Tue, 10 Jan 2006 12:24:29 -0800

Re: System International Units versus Imperial English units??

Brian Ellis

Wed, 11 Jan 2006 11:30:08 +0200

Re: System International Units versus Imperial English units??

Stadem, Richard D.

Wed, 11 Jan 2006 07:13:57 -0600

Re: System International Units versus Imperial English units??

Eric CHRISTISON

Wed, 11 Jan 2006 14:16:00 -0000

Re: System International Units versus Imperial English units??

Ahne Oosterhof

Wed, 11 Jan 2006 07:39:21 -0800

Re: System International Units versus Imperial English units??

Douglas O. Pauls

Wed, 11 Jan 2006 10:31:58 -0600

Re: System International Units versus Imperial English units??

Graham Naisbitt

Wed, 11 Jan 2006 18:05:50 +0000

Re: System International Units versus Imperial English units??

Stadem, Richard D.

Wed, 11 Jan 2006 12:54:09 -0600

Re: System International Units versus Imperial English units??

Douglas O. Pauls

Wed, 11 Jan 2006 13:11:29 -0600

Re: System International Units versus Imperial English units??

Michael McMonagle

Wed, 11 Jan 2006 13:35:56 -0600

Re: System International Units versus Imperial English units??

Stadem, Richard D.

Wed, 11 Jan 2006 13:37:53 -0600

Re: System International Units versus Imperial English units??

Cheryl Johnson

Wed, 11 Jan 2006 12:54:59 -0700

Re: System International Units versus Imperial English units??

David Tremmel

Wed, 11 Jan 2006 14:22:16 -0600

Re: System International Units versus Imperial English units??

Stadem, Richard D.

Wed, 11 Jan 2006 14:35:56 -0600

Re: System International Units versus Imperial English units??

McGlaughlin, Jeffrey A

Wed, 11 Jan 2006 16:02:30 -0500

Re: System International Units versus Imperial English units??

Whittaker, Dewey (AZ75)

Thu, 12 Jan 2006 06:41:56 -0700

Test Lab for Thiourea

Joe Russeau

Tue, 3 Jan 2006 13:47:35 -0500

Re: Test Lab for Thiourea

Jason Gregory

Tue, 3 Jan 2006 13:50:00 -0600

Testing for Thiourea

R Sedlak

Tue, 3 Jan 2006 11:11:57 -0800

Re: Testing for Thiourea

Douglas O. Pauls

Tue, 3 Jan 2006 13:14:06 -0600

Re: Testing for Thiourea

Wed, 4 Jan 2006 01:38:54 EST

Thermal dissipation factor

Selva Suganthi

Mon, 9 Jan 2006 16:54:11 +0530

Thermal dissipation factor

Selva Suganthi

Mon, 9 Jan 2006 16:54:21 +0530

Re: Thermal dissipation factor

Jeffrey Bush

Mon, 9 Jan 2006 08:33:41 -0500

Re: Thermal dissipation factor

Selva Suganthi

Tue, 10 Jan 2006 14:44:06 +0530

Thiourea

R Sedlak

Tue, 3 Jan 2006 12:14:49 -0800

Re: Thiourea

John Burke

Tue, 3 Jan 2006 12:28:00 -0800

Re: Thiourea

Stadem, Richard

Tue, 3 Jan 2006 14:39:55 -0600

Re: Thiourea

Brian Ellis

Wed, 4 Jan 2006 09:29:54 +0200

Time before Cleaning WS Flux

Joel Mearig

Wed, 18 Jan 2006 13:42:32 -0800

Wed, 18 Jan 2006 17:47:11 EST

Brian Ellis

Thu, 19 Jan 2006 10:50:05 +0200

Thu, 19 Jan 2006 11:59:18 EST

Mike Fenner

Fri, 20 Jan 2006 08:49:30 -0000

Brian Ellis

Fri, 20 Jan 2006 12:15:43 +0200

Mike Fenner

Fri, 20 Jan 2006 12:02:49 -0000

Brian Ellis

Tue, 24 Jan 2006 13:29:48 +0200

Time to fish or cut bait

Neil Maloney

Wed, 18 Jan 2006 14:31:35 -0600

David D. Hillman

Wed, 18 Jan 2006 14:38:49 -0600

Stadem, Richard D.

Wed, 18 Jan 2006 15:07:54 -0600

Stadem, Richard D.

Wed, 18 Jan 2006 15:31:39 -0600

Lee Whiteman

Wed, 18 Jan 2006 16:52:45 -0500

Stadem, Richard D.

Wed, 18 Jan 2006 16:03:18 -0600

Wed, 18 Jan 2006 17:26:02 EST

Mike Fenner

Thu, 19 Jan 2006 08:25:51 -0000

Trace Resistance

Ralph Richart

Wed, 25 Jan 2006 19:09:57 -0800

Re: Trace Resistance

Craig Sullivan

Thu, 26 Jan 2006 07:46:23 -0500

Re: Trace Resistance

Happy Holden

Thu, 26 Jan 2006 09:56:30 -0500

Re: Trace Resistance

Blair K. Hogg

Thu, 26 Jan 2006 08:30:52 -0800

Water Solvable Mask

Ralph Richart

Mon, 9 Jan 2006 09:38:56 -0800

Graham Naisbitt

Mon, 9 Jan 2006 18:14:25 +0000

Stadem, Richard D.

Mon, 9 Jan 2006 12:20:32 -0600

Michael McMonagle

Mon, 9 Jan 2006 12:25:58 -0600

Water-soluble spacers/standoffs

Barmuta, Mike

Mon, 9 Jan 2006 10:32:20 -0800

Jason Gregory

Mon, 9 Jan 2006 12:50:54 -0600

Re: Water-soluble spacers/standoffs

Stadem, Richard D.

Mon, 9 Jan 2006 13:50:45 -0600

Re: Water-soluble spacers/standoffs

Stephen Gregory

Mon, 9 Jan 2006 13:18:49 -0600

Re: Water-soluble spacers/standoffs

Michael McMonagle

Mon, 9 Jan 2006 13:03:10 -0600

WEEE symbol

Terry Kozlyk

Mon, 9 Jan 2006 09:02:58 -0700

Stadem, Richard D.

Mon, 9 Jan 2006 10:08:14 -0600

Genny Gibbard

Mon, 9 Jan 2006 10:14:34 -0600

Terry Kozlyk

Mon, 9 Jan 2006 09:16:52 -0700

Michael McMonagle

Mon, 9 Jan 2006 10:24:41 -0600

Genny Gibbard

Mon, 9 Jan 2006 10:25:27 -0600

Jeffrey Bush

Mon, 9 Jan 2006 11:29:13 -0500

Stadem, Richard D.

Mon, 9 Jan 2006 10:38:26 -0600

Paula Esty

Mon, 9 Jan 2006 13:03:37 -0500

Ivanoe Pedruzzi

Tue, 10 Jan 2006 17:24:21 +0100

Phil Nutting

Tue, 10 Jan 2006 11:36:13 -0500

Genny Gibbard

Tue, 10 Jan 2006 10:45:31 -0600

What is a .pho file

Kerry McMullen

Tue, 10 Jan 2006 09:12:12 -0500

Michael Kuczynski

Tue, 10 Jan 2006 09:35:14 -0500

Kerry McMullen

Tue, 10 Jan 2006 09:37:54 -0500

Brad Saunders

Tue, 10 Jan 2006 22:16:24 -0500

kwood716

Tue, 10 Jan 2006 22:20:59 -0500

Selva Suganthi

Wed, 11 Jan 2006 10:01:21 +0530

Wire bondable gold pads

Steve Kelly

Wed, 11 Jan 2006 10:17:47 -0500

Lee parker

Wed, 11 Jan 2006 10:29:21 -0500

Steve Kelly

Wed, 11 Jan 2006 10:38:31 -0500

Joyce Koo

Wed, 11 Jan 2006 11:30:14 -0500