TECHNET Archives

January 2006

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Heller 1500W Oven
From:
"Taylor, Royce" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Taylor, Royce
Date:
Thu, 26 Jan 2006 11:49:29 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines) 
Ron

Check to see if the top zone plenum cover or plenum itself is not warped. the hardware that supports the movable rail to the thompson rod/gear track might be hitting the plenum cover, usually the greatest amount of warp is in the center of the cover.
(have you recently had to replace a seized blower motor?)

You can also check for play in the ball bushing that rides on the Thompson shaft.

Regards
Royce
*************************************************************************
Royce Taylor
Process Engineering/Production
Suntron Corporation NEO
104 Glenn Street
Lawrence, MA 01843
(978)747-2061 voice
(978)747-2010 fax
[log in to unmask]



-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Ron Peeler
Sent: Thursday, January 26, 2006 12:09 PM
To: [log in to unmask]
Subject: [TN] Heller 1500W Oven


Has anyone in the industry come across a Heller 1500W Oven that begins to
squeak loudly once you move it in from its max width to its minimum width?
All the noise primarly happens in the middle of the oven once it passes over
the middle support rod.

Ronald D. Peeler Jr., B.S. IE
Process Engineer
SWEMCO
Moorestown, NJ 08057
Tel: (856).222.9900 ext. 31
Cel: (484).948.0779
Fax: (856).222.0700
[log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2