TECHNET Archives

January 2006

TechNet@IPC.ORG
Options: Hide Table of Contents

Zilber Gil (1 Message)
Yordan Venev (2 Messages)
Yannick Brisson (1 Message)
Whittaker, Dewey (AZ75) (7 Messages)
Werner Engelmaier (20 Messages)
Wenger, George M. (4 Messages)
Wee Mei (3 Messages)
Victor G. Hernandez (7 Messages)
Tom Moore (1 Message)
Todd, Richard (3 Messages)
Terry Kozlyk (5 Messages)
Tempea, Ioan (6 Messages)
Ted Tontis (5 Messages)
Taylor, Royce (3 Messages)
Susan Mansilla (2 Messages)
Sumxplore (1 Message)
sumxp (1 Message)
Steve Mikell (2 Messages)
Steve Kelly (2 Messages)
Steve Hodge (4 Messages)
Stephen Gregory (11 Messages)
Stadem, Richard (2 Messages)
Stadem, Richard D. (34 Messages)
Sherif Refaat (1 Message)
Selva Suganthi (5 Messages)
Scott B. Westheimer (1 Message)
Schaefer, Chris (3 Messages)
Sauer, Steve (Xetron) (1 Message)
Sara Rice (1 Message)
Russell Burdick (1 Message)
Ron Peeler (2 Messages)
Ron Fowler (1 Message)
Rodney Miller (2 Messages)
Robert Walker (2 Messages)
Roach, David (1 Message)
Rick Thompson (1 Message)
Richard Kraszewski (2 Messages)
Ralph Richart (2 Messages)
R Sedlak (5 Messages)
Phil Nutting (4 Messages)
[log in to unmask] (1 Message)
Paula Esty (1 Message)
paul reid (1 Message)
Paresh Limaye (1 Message)
Ofer Cohen (2 Messages)
Neil Maloney (1 Message)
MYEMAIL (1 Message)
Mike Fenner (7 Messages)
Michael McMonagle (12 Messages)
Michael Kuczynski (1 Message)
McGlaughlin, Jeffrey A (2 Messages)
McGee, Mike (MN51) (2 Messages)
Mattson, Jeffrey (4 Messages)
Martin Butcher (1 Message)
Marcello Brett Malteze (1 Message)
Leo Higgins (1 Message)
Lee Whiteman (1 Message)
Lee parker (6 Messages)
Lance Mayes (1 Message)
kwood716 (1 Message)
Kevin Glidden (2 Messages)
Kerry McMullen (5 Messages)
Kelly Morris (2 Messages)
Kathy (1 Message)
Kane, Joseph E (US SSA) (1 Message)
Kane, Amol (349) (12 Messages)
Juan T. Marugán (1 Message)
Joyce Koo (6 Messages)
Joseph H. Smith (5 Messages)
jose (1 Message)
Jose Marroquin (1 Message)
Jon McDowell (3 Messages)
John Parsons (1 Message)
John Maxwell (1 Message)
John Foster (1 Message)
John Burris (3 Messages)
John Burke (21 Messages)
Joel Mearig (2 Messages)
Joel Alexander (3 Messages)
Joe Russeau (6 Messages)
Joe Fjelstad (1 Message)
Jim Gleason (1 Message)
Jerry Dengler (2 Messages)
Jeffrey Bush (14 Messages)
Jason Gregory (4 Messages)
Jack Crawford (1 Message)
Ivanoe Pedruzzi (4 Messages)
IPC Mail (1 Message)
Happy Holden (7 Messages)
Guy Ramsey (1 Message)
Graham Naisbitt (5 Messages)
Graham Collins (1 Message)
gina hernefjord (1 Message)
Gervascio, Thomas (2 Messages)
Gerard O'Brien (1 Message)
Gerald Gagnon (2 Messages)
George Milad (3 Messages)
George Carroll (2 Messages)
Genny Gibbard (5 Messages)
Garry Morand (1 Message)
Frederick Miller (1 Message)
Franklin D Asbell (3 Messages)
Franklin Asbell (2 Messages)
Fox, Ian (2 Messages)
Eric CHRISTISON (2 Messages)
Efendy Wijaya (1 Message)
Eddie Rocha (5 Messages)
Dwight Mattix (3 Messages)
Douglas O. Pauls (11 Messages)
Dehoyos, Ramon (22 Messages)
Davis, Larry (1 Message)
David Tremmel (1 Message)
David Ricketts (1 Message)
David D. Hillman (11 Messages)
Dave Dixon (1 Message)
Darrel Therriault (1 Message)
Creswick, Steven (2 Messages)
Crepeau, Phil (Space Technology) (3 Messages)
Craig Sullivan (1 Message)
Chris Schaefer (1 Message)
Chris Ball (3 Messages)
Cheryl Johnson (1 Message)
Brooks,Bill (1 Message)
Brian Pulis (1 Message)
Brian Ellis (10 Messages)
Bremer, Gary (2 Messages)
Brad Saunders (4 Messages)
Bob Wilson (1 Message)
bob wettermann (1 Message)
Bob Walker (1 Message)
Bob K Veale (1 Message)
Bloomquist, Ken (3 Messages)
Blomberg, Rainer (FL51) (2 Messages)
Blair K. Hogg (2 Messages)
Bill Coleman (1 Message)
Bev Christian (3 Messages)
Barry Gallegos (1 Message)
Barmuta, Mike (2 Messages)
Babcock John (2 Messages)
Anil Kher (1 Message)
Ahne Oosterhof (3 Messages)
<> (10 Messages)
- Bogert (2 Messages)

Subject

From Sorted by Sender, Reverse Alphabetically

Date
New Sender Zilber Gil
LGA Package reliability
Zilber Gil
Tue, 10 Jan 2006 19:55:57 +0200
New Sender Yordan Venev
Re: SMT Connector Assembly Question
Yordan Venev
Fri, 6 Jan 2006 13:29:43 +0200
Re: Paste In-Hole process
Yordan Venev
Fri, 6 Jan 2006 13:35:27 +0200
New Sender Yannick Brisson
Re: baking moisture sensitive components
Yannick Brisson
Tue, 24 Jan 2006 12:02:20 -0500
New Sender Whittaker, Dewey (AZ75)
Re: System International Units versus Imperial English units??
Whittaker, Dewey (AZ75)
Thu, 12 Jan 2006 06:41:56 -0700
Re: Soldering matte tin over nickel plating NTC
Whittaker, Dewey (AZ75)
Fri, 20 Jan 2006 06:50:31 -0700
Re: Soldering matte tin over nickel plating
Whittaker, Dewey (AZ75)
Fri, 20 Jan 2006 07:01:21 -0700
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Whittaker, Dewey (AZ75)
Wed, 18 Jan 2006 14:23:50 -0700
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Whittaker, Dewey (AZ75)
Wed, 18 Jan 2006 14:05:08 -0700
Re: Definition
Whittaker, Dewey (AZ75)
Fri, 27 Jan 2006 07:21:01 -0700
Re: Definition
Whittaker, Dewey (AZ75)
Thu, 26 Jan 2006 14:22:31 -0700
New Sender Werner Engelmaier
Re: RoHS board finish
Werner Engelmaier
Wed, 18 Jan 2006 15:39:45 EST
Re: RoHS board finish
Werner Engelmaier
Wed, 18 Jan 2006 15:21:24 EST
Re: RoHS board finish
Werner Engelmaier
Wed, 18 Jan 2006 15:18:54 EST
Re: RoHS board finish
Werner Engelmaier
Wed, 18 Jan 2006 15:00:07 EST
Re: LGA Package reliability
Werner Engelmaier
Tue, 10 Jan 2006 13:23:32 EST
Re: Immersion Gold and LF PROCESS
Werner Engelmaier
Tue, 24 Jan 2006 13:18:09 EST
Re: enig bad board
Werner Engelmaier
Tue, 17 Jan 2006 07:59:39 EST
Re: enig bad board
Werner Engelmaier
Sat, 14 Jan 2006 08:25:35 EST
Re: enig bad board
Werner Engelmaier
Fri, 13 Jan 2006 10:56:55 EST
Re: Drill and plated hole callouts
Werner Engelmaier
Tue, 17 Jan 2006 20:08:18 EST
Re: Drill and plated hole callouts
Werner Engelmaier
Tue, 17 Jan 2006 16:40:23 EST
Re: Drill and plated hole callouts
Werner Engelmaier
Tue, 17 Jan 2006 15:45:31 EST
Re: Drill and plated hole callouts
Werner Engelmaier
Mon, 16 Jan 2006 20:41:08 EST
Re: Dissolution rates and solder paste selection
Werner Engelmaier
Mon, 16 Jan 2006 12:58:56 EST
DIP pic
Werner Engelmaier
Tue, 3 Jan 2006 17:37:24 EST
Re: baking moisture sensitive components
Werner Engelmaier
Tue, 24 Jan 2006 16:41:33 EST
Re: baking moisture sensitive components
Werner Engelmaier
Tue, 24 Jan 2006 13:08:35 EST
Re: baking moisture sensitive components
Werner Engelmaier
Tue, 24 Jan 2006 11:22:06 EST
Re: <List>Re: [TN] Drill and plated hole callouts
Werner Engelmaier
Tue, 17 Jan 2006 19:56:22 EST
Re: <List>Re: [TN] Drill and plated hole callouts
Werner Engelmaier
Tue, 17 Jan 2006 17:11:22 EST
New Sender Wenger, George M.
Re: RoHS board finish
Wenger, George M.
Wed, 18 Jan 2006 15:08:13 -0500
Re: Pad Damage, Leave it alone, or fix it?
Wenger, George M.
Wed, 25 Jan 2006 15:18:01 -0500
Re: ImAg Flaking away
Wenger, George M.
Wed, 18 Jan 2006 11:30:33 -0500
Re: Dissolution rates and solder paste selection
Wenger, George M.
Mon, 16 Jan 2006 12:49:24 -0500
New Sender Wee Mei
Solder Wettability Problem
Wee Mei
Mon, 9 Jan 2006 09:32:34 +0800
Re: PWB SMT pad retention
Wee Mei
Fri, 27 Jan 2006 07:25:11 +0800
Plugged via issue
Wee Mei
Thu, 19 Jan 2006 11:45:48 +0800
New Sender Victor G. Hernandez
Re: Solder Wettability Problem
Victor G. Hernandez
Mon, 9 Jan 2006 07:01:54 -0600
Re: Seeking Information on Test for Pb content in SnPb finis hed component leads
Victor G. Hernandez
Thu, 5 Jan 2006 09:23:09 -0600
PWB Buried/Blind Via Technology
Victor G. Hernandez
Mon, 16 Jan 2006 08:17:04 -0600
Press Fit Pins / Compliance Pins
Victor G. Hernandez
Tue, 10 Jan 2006 10:06:24 -0600
Re: Immersion Gold and LF PROCESS
Victor G. Hernandez
Fri, 27 Jan 2006 06:01:46 -0600
Immersion Gold and LF PROCESS
Victor G. Hernandez
Tue, 24 Jan 2006 11:49:39 -0600
Compliance Pins
Victor G. Hernandez
Fri, 6 Jan 2006 11:52:36 -0600
New Sender Tom Moore
Solder acceptance criteria for non-electronic connections
Tom Moore
Mon, 9 Jan 2006 15:51:11 -0600
New Sender Todd, Richard
Re: System International Units versus Imperial English units ??
Todd, Richard
Wed, 11 Jan 2006 08:30:59 -0500
Re: Soldering Weights
Todd, Richard
Wed, 25 Jan 2006 11:30:25 -0500
Soldering Weights
Todd, Richard
Wed, 25 Jan 2006 10:24:03 -0500
New Sender Terry Kozlyk
Re: WEEE symbol
Terry Kozlyk
Mon, 9 Jan 2006 09:16:52 -0700
WEEE symbol
Terry Kozlyk
Mon, 9 Jan 2006 09:02:58 -0700
Re: SMT Connector Assembly Question
Terry Kozlyk
Fri, 6 Jan 2006 08:20:03 -0700
SMT Connector Assembly Question
Terry Kozlyk
Thu, 5 Jan 2006 09:33:47 -0700
Re: Panel Optimization Software / Free or Purchase
Terry Kozlyk
Fri, 6 Jan 2006 08:31:58 -0700
New Sender Tempea, Ioan
WS vs no-clean, tools segragation
Tempea, Ioan
Tue, 17 Jan 2006 11:34:44 -0500
Panelization of backplanes
Tempea, Ioan
Thu, 19 Jan 2006 15:37:58 -0500
Re: Large SMT physical failure prevention
Tempea, Ioan
Tue, 31 Jan 2006 11:56:24 -0500
How to use XRF?
Tempea, Ioan
Fri, 6 Jan 2006 09:39:21 -0500
Re: baking moisture sensitive components
Tempea, Ioan
Tue, 24 Jan 2006 15:56:45 -0500
Re: <List>[TN] Panelization of backplanes
Tempea, Ioan
Fri, 20 Jan 2006 07:55:57 -0500
New Sender Ted Tontis
Re: Solder performs
Ted Tontis
Fri, 20 Jan 2006 15:19:18 -0600
Re: Optimum dia of thru-holes
Ted Tontis
Mon, 30 Jan 2006 15:44:51 -0600
Re: LPI - matte vs. gloss or semi-gloss
Ted Tontis
Mon, 23 Jan 2006 12:30:11 -0600
Re: Au & Photoresist Thickness Measurement
Ted Tontis
Tue, 31 Jan 2006 11:16:53 -0600
Re: <List>[TN] Panelization of backplanes
Ted Tontis
Thu, 19 Jan 2006 15:36:57 -0600
New Sender Taylor, Royce
Older Blue-M ovens.
Taylor, Royce
Fri, 27 Jan 2006 08:22:07 -0600
Re: Heller 1500W Oven
Taylor, Royce
Thu, 26 Jan 2006 11:49:29 -0600
Building a lead free board (with PB free BGA with eutectic solder
Taylor, Royce
Thu, 19 Jan 2006 07:11:18 -0600
New Sender Susan Mansilla
Re: Rocha Laminate Voids..
Susan Mansilla
Wed, 4 Jan 2006 20:15:32 EST
Rocha Laminate Voids..
Susan Mansilla
Wed, 4 Jan 2006 09:24:09 EST
New Sender Sumxplore
Re: enig bad board
Sumxplore
Sat, 14 Jan 2006 13:54:49 +0800
New Sender sumxp
enig bad board
sumxp
Fri, 13 Jan 2006 09:48:22 -0600
New Sender Steve Mikell
Re: Definition
Steve Mikell
Tue, 24 Jan 2006 04:50:37 +0700
Re: Definition
Steve Mikell
Sun, 22 Jan 2006 07:52:04 +0700
New Sender Steve Kelly
Re: Wire bondable gold pads
Steve Kelly
Wed, 11 Jan 2006 10:38:31 -0500
Wire bondable gold pads
Steve Kelly
Wed, 11 Jan 2006 10:17:47 -0500
New Sender Steve Hodge
Re: <List>[TN] Panelization of backplanes
Steve Hodge
Thu, 19 Jan 2006 13:39:34 -0700
Re: <List>[TN] Au & Photoresist Thickness Measurement
Steve Hodge
Tue, 31 Jan 2006 10:12:09 -0700
Re: <List>Re: [TN] Drill and plated hole callouts
Steve Hodge
Tue, 17 Jan 2006 14:44:40 -0700
Re: <List>Re: [TN] <List>Re: [TN] Drill and plated hole callouts
Steve Hodge
Tue, 17 Jan 2006 15:25:33 -0700
New Sender Stephen Gregory
Re: Water-soluble spacers/standoffs
Stephen Gregory
Mon, 9 Jan 2006 13:18:49 -0600
Re: Solder preforms
Stephen Gregory
Fri, 20 Jan 2006 14:18:07 -0600
Re: Solder "Stop the Wicking" Plugs
Stephen Gregory
Wed, 4 Jan 2006 09:15:14 -0600
Prepping Stranded Litz wire for soldering...
Stephen Gregory
Mon, 30 Jan 2006 10:28:14 -0600
Pictures posted...
Stephen Gregory
Wed, 4 Jan 2006 08:05:02 -0600
Re: Pad Damage, Leave it alone, or fix it?
Stephen Gregory
Wed, 25 Jan 2006 14:23:31 -0600
Pad Damage, Leave it alone, or fix it?
Stephen Gregory
Wed, 25 Jan 2006 14:09:22 -0600
Re: non-corrosive detergent
stephen gregory
Mon, 2 Jan 2006 17:04:33 -0800
Re: DIP pic
Stephen Gregory
Thu, 5 Jan 2006 09:52:40 -0600
Re: Definition
Stephen Gregory
Mon, 23 Jan 2006 13:10:35 -0600
Re: baking moisture sensitive components
Stephen Gregory
Tue, 24 Jan 2006 11:03:45 -0600
New Sender Stadem, Richard
Re: Thiourea
Stadem, Richard
Tue, 3 Jan 2006 14:39:55 -0600
Re: Seeking Information on Test for Pb content in SnPb finished component leads
Stadem, Richard
Thu, 5 Jan 2006 07:13:21 -0600
New Sender Stadem, Richard D.
Re: Wire Harness Repair Standard
Stadem, Richard D.
Mon, 16 Jan 2006 15:32:18 -0600
Re: WEEE symbol
Stadem, Richard D.
Mon, 9 Jan 2006 10:38:26 -0600
Re: WEEE symbol
Stadem, Richard D.
Mon, 9 Jan 2006 10:08:14 -0600
Re: Water-soluble spacers/standoffs
Stadem, Richard D.
Mon, 9 Jan 2006 13:50:45 -0600
Re: Water Solvable Mask
Stadem, Richard D.
Mon, 9 Jan 2006 12:20:32 -0600
Re: Time to fish or cut bait
Stadem, Richard D.
Wed, 18 Jan 2006 16:03:18 -0600
Re: Time to fish or cut bait
Stadem, Richard D.
Wed, 18 Jan 2006 15:31:39 -0600
Re: Time to fish or cut bait
Stadem, Richard D.
Wed, 18 Jan 2006 15:07:54 -0600
Re: System International Units versus Imperial English units??
Stadem, Richard D.
Wed, 11 Jan 2006 14:35:56 -0600
Re: System International Units versus Imperial English units??
Stadem, Richard D.
Wed, 11 Jan 2006 13:37:53 -0600
Re: System International Units versus Imperial English units??
Stadem, Richard D.
Wed, 11 Jan 2006 12:54:09 -0600
Re: System International Units versus Imperial English units??
Stadem, Richard D.
Wed, 11 Jan 2006 07:13:57 -0600
Re: SVS 8200
Stadem, Richard D.
Mon, 30 Jan 2006 07:12:38 -0600
Re: Solder Wettability Problem
Stadem, Richard D.
Mon, 9 Jan 2006 08:16:22 -0600
Re: RoHS board finish
Stadem, Richard D.
Wed, 18 Jan 2006 13:26:02 -0600
Re: RoHS board finish
Stadem, Richard D.
Wed, 18 Jan 2006 13:25:19 -0600
Re: PWB SMT pad retention
Stadem, Richard D.
Thu, 19 Jan 2006 16:08:42 -0600
PWB SMT pad retention
Stadem, Richard D.
Thu, 19 Jan 2006 10:42:41 -0600
Re: Press Fit Pins / Compliance Pins
Stadem, Richard D.
Tue, 10 Jan 2006 12:26:26 -0600
Re: Prepping Stranded Litz wire for soldering...
Stadem, Richard D.
Mon, 30 Jan 2006 12:55:54 -0600
Re: Pad Damage, Leave it alone, or fix it?
Stadem, Richard D.
Wed, 25 Jan 2006 14:56:36 -0600
Re: Optimum dia of thru-holes
Stadem, Richard D.
Mon, 30 Jan 2006 14:48:30 -0600
Re: LGA Package reliability
Stadem, Richard D.
Tue, 10 Jan 2006 12:46:04 -0600
Re: Large SMT physical failure prevention
Stadem, Richard D.
Tue, 31 Jan 2006 12:10:19 -0600
Re: Immersion Gold and LF PROCESS
Stadem, Richard D.
Thu, 26 Jan 2006 07:24:23 -0600
Re: Immersion Gold and LF PROCESS
Stadem, Richard D.
Wed, 25 Jan 2006 06:58:16 -0600
Re: ImAg Flaking away
Stadem, Richard D.
Wed, 18 Jan 2006 10:23:09 -0600
Re: enig bad board
Stadem, Richard D.
Mon, 16 Jan 2006 07:59:27 -0600
Re: Drill and plated hole callouts
Stadem, Richard D.
Tue, 17 Jan 2006 09:32:26 -0600
Re: Dissolution rates and solder paste selection
Stadem, Richard D.
Mon, 16 Jan 2006 15:24:23 -0600
Re: Building a lead free board (with PB free BGA with eutectic solder
Stadem, Richard D.
Thu, 19 Jan 2006 08:08:35 -0600
Re: baking moisture sensitive components
Stadem, Richard D.
Tue, 24 Jan 2006 10:41:17 -0600
Re: baking moisture sensitive components
Stadem, Richard D.
Tue, 24 Jan 2006 10:38:08 -0600
Re: Any comments?
Stadem, Richard D.
Thu, 12 Jan 2006 13:01:41 -0600
New Sender Sherif Refaat
Re: PWB SMT pad retention
Sherif Refaat
Thu, 19 Jan 2006 12:31:23 -0500
New Sender Selva Suganthi
Re: What is a .pho file
Selva Suganthi
Wed, 11 Jan 2006 10:01:21 +0530
Re: Thermal dissipation factor
Selva Suganthi
Tue, 10 Jan 2006 14:44:06 +0530
Thermal dissipation factor
Selva Suganthi
Mon, 9 Jan 2006 16:54:21 +0530
Thermal dissipation factor
Selva Suganthi
Mon, 9 Jan 2006 16:54:11 +0530
Paste In-Hole process
Selva Suganthi
Fri, 6 Jan 2006 16:50:48 +0530
New Sender Scott B. Westheimer
Re: Question about expoxies
Scott B. Westheimer
Thu, 19 Jan 2006 11:50:52 -0500
New Sender Schaefer, Chris
Re: Soldering Weights
Schaefer, Chris
Wed, 25 Jan 2006 12:03:19 -0600
Re: Soldering Weights
Schaefer, Chris
Wed, 25 Jan 2006 11:14:37 -0600
Re: Bin/ Tote Aqueous Washer
Schaefer, Chris
Wed, 4 Jan 2006 10:54:58 -0600
New Sender Sauer, Steve (Xetron)
Re: Soldering matte tin over nickel plating NTC
Sauer, Steve (Xetron)
Fri, 20 Jan 2006 07:40:29 -0500
New Sender Sara Rice
Re: How to use XRF?
Sara Rice
Fri, 6 Jan 2006 13:40:57 -0500
New Sender Russell Burdick
Re: non-corrosive detergent
Russell Burdick
Tue, 3 Jan 2006 11:25:05 -0700
New Sender Ron Peeler
Re: Heller 1500W Oven
Ron Peeler
Thu, 26 Jan 2006 12:59:13 -0500
Heller 1500W Oven
Ron Peeler
Thu, 26 Jan 2006 12:08:31 -0500
New Sender Ron Fowler
Soldered J lead components vs socketed
Ron Fowler
Fri, 27 Jan 2006 14:46:06 -0500
New Sender Rodney Miller
Re: Image transfer
Rodney Miller
Mon, 9 Jan 2006 15:09:25 -0600
Image transfer
Rodney Miller
Mon, 9 Jan 2006 11:43:23 -0600
New Sender Robert Walker
Re: RoHS board finish
Robert Walker
Wed, 18 Jan 2006 13:21:31 EST
RoHS board finish
Robert Walker
Wed, 18 Jan 2006 12:39:06 EST
New Sender Roach, David
Re: Bin/ Tote Aqueous Washer
Roach, David
Wed, 4 Jan 2006 10:48:03 -0600
New Sender Rick Thompson
System International Units versus Imperial English units??
Rick Thompson
Tue, 10 Jan 2006 12:03:23 -0800
New Sender Richard Kraszewski
Re: ImAg Flaking away
Richard Kraszewski
Wed, 18 Jan 2006 11:24:12 -0500
ImAg Flaking away
Richard Kraszewski
Wed, 18 Jan 2006 11:20:20 -0500
New Sender Ralph Richart
Water Solvable Mask
Ralph Richart
Mon, 9 Jan 2006 09:38:56 -0800
Trace Resistance
Ralph Richart
Wed, 25 Jan 2006 19:09:57 -0800
New Sender R Sedlak
Thiourea
R Sedlak
Tue, 3 Jan 2006 12:14:49 -0800
Testing for Thiourea
R Sedlak
Tue, 3 Jan 2006 11:11:57 -0800
Re: Question about expoxies
R Sedlak
Thu, 19 Jan 2006 10:17:14 -0800
Re: lpi soldermask
R Sedlak
Tue, 31 Jan 2006 07:09:25 -0800
Re: ImAg Flaking away
R Sedlak
Wed, 18 Jan 2006 09:03:19 -0800
New Sender Phil Nutting
Re: WEEE symbol
Phil Nutting
Tue, 10 Jan 2006 11:36:13 -0500
Re: Question about expoxies
Phil Nutting
Thu, 19 Jan 2006 13:32:32 -0500
Large SMT physical failure prevention
Phil Nutting
Tue, 31 Jan 2006 11:31:53 -0500
Re: Conforma Coat (Urethane) & bubbles
Phil Nutting
Tue, 24 Jan 2006 10:29:29 -0500
New Sender [log in to unmask]
Re: How to use XRF?
[log in to unmask]
Fri, 6 Jan 2006 10:04:47 -0500
New Sender Paula Esty
Re: WEEE symbol
Paula Esty
Mon, 9 Jan 2006 13:03:37 -0500
New Sender paul reid
Re: (PCB fabrication) Lam Voids
paul reid
Tue, 3 Jan 2006 13:19:34 -0500
New Sender Paresh Limaye
Need an edge card connector - odd size
Paresh Limaye
Mon, 16 Jan 2006 09:00:44 -0800
New Sender Ofer Cohen
Re: Drill and plated hole callouts
Ofer Cohen
Wed, 18 Jan 2006 11:07:11 +0200
Re: Drill and plated hole callouts
Ofer Cohen
Tue, 17 Jan 2006 18:37:26 +0200
New Sender Neil Maloney
Time to fish or cut bait
Neil Maloney
Wed, 18 Jan 2006 14:31:35 -0600
New Sender MYEMAIL
handling Thiourea perhaps be assisted by these guys
MYEMAIL
Fri, 6 Jan 2006 22:27:24 +0200
New Sender Mike Fenner
Re: WS vs no-clean, tools segragation
Mike Fenner
Thu, 19 Jan 2006 09:11:11 -0000
Re: Time to fish or cut bait
Mike Fenner
Thu, 19 Jan 2006 08:25:51 -0000
Re: Time before Cleaning WS Flux
Mike Fenner
Fri, 20 Jan 2006 12:02:49 -0000
Re: Time before Cleaning WS Flux
Mike Fenner
Fri, 20 Jan 2006 08:49:30 -0000
Re: Solder performs
Mike Fenner
Wed, 25 Jan 2006 08:37:23 -0000
Re: Prepping Stranded Litz wire for soldering...
Mike Fenner
Mon, 30 Jan 2006 17:01:42 -0000
Re: Gold over Tin
Mike Fenner
Mon, 9 Jan 2006 10:08:57 -0000
New Sender Michael McMonagle
Re: WEEE symbol
Michael McMonagle
Mon, 9 Jan 2006 10:24:41 -0600
Re: Water-soluble spacers/standoffs
Michael McMonagle
Mon, 9 Jan 2006 13:03:10 -0600
Re: Water Solvable Mask
Michael McMonagle
Mon, 9 Jan 2006 12:25:58 -0600
Re: System International Units versus Imperial English units??
Michael McMonagle
Wed, 11 Jan 2006 13:35:56 -0600
Re: Soldering Weights
Michael McMonagle
Wed, 25 Jan 2006 11:25:13 -0600
Re: Soldering Weights
Michael McMonagle
Wed, 25 Jan 2006 10:30:08 -0600
Re: Solder "Stop the Wicking" Plugs
Michael McMonagle
Wed, 4 Jan 2006 08:43:26 -0600
Re: Solder "Stop the Wicking" Plugs
Michael McMonagle
Wed, 4 Jan 2006 08:13:59 -0600
Re: Paste In-Hole process
Michael McMonagle
Fri, 6 Jan 2006 07:59:53 -0600
Re: Older Blue-M ovens.
Michael McMonagle
Fri, 27 Jan 2006 08:35:20 -0600
Re: Image transfer
Michael McMonagle
Mon, 9 Jan 2006 12:29:01 -0600
Au & Photoresist Thickness Measurement
Michael McMonagle
Tue, 31 Jan 2006 10:46:28 -0600
New Sender Michael Kuczynski
Re: What is a .pho file
Michael Kuczynski
Tue, 10 Jan 2006 09:35:14 -0500
New Sender McGlaughlin, Jeffrey A
Re: System International Units versus Imperial English units??
McGlaughlin, Jeffrey A
Wed, 11 Jan 2006 16:02:30 -0500
Re: Drill and plated hole callouts
McGlaughlin, Jeffrey A
Tue, 17 Jan 2006 07:20:59 -0500
New Sender McGee, Mike (MN51)
Re: Manual conformal coat dipping process
McGee, Mike (MN51)
Wed, 11 Jan 2006 07:46:43 -0600
Re: Manual conformal coat dipping process
McGee, Mike (MN51)
Tue, 10 Jan 2006 15:55:14 -0600
New Sender Mattson, Jeffrey
Re: Press Fit Pins / Compliance Pins
Mattson, Jeffrey
Tue, 10 Jan 2006 11:49:04 -0500
Re: Humiseal conformal coating
Mattson, Jeffrey
Wed, 25 Jan 2006 09:52:04 -0500
Re: Conformal Coatings
Mattson, Jeffrey
Fri, 6 Jan 2006 13:17:28 -0500
Re: Compliance Pins
Mattson, Jeffrey
Fri, 6 Jan 2006 13:14:54 -0500
New Sender Martin Butcher
Solder preforms
Martin Butcher
Fri, 20 Jan 2006 11:08:27 -0800
New Sender Marcello Brett Malteze
Re: (PCB fabrication) Lam Voids
Marcello Brett Malteze
Wed, 25 Jan 2006 06:34:05 -0600
New Sender Leo Higgins
Re: Soldering matte tin over nickel plating
Leo Higgins
Thu, 19 Jan 2006 14:45:22 -0800
New Sender Lee Whiteman
Re: Time to fish or cut bait
Lee Whiteman
Wed, 18 Jan 2006 16:52:45 -0500
New Sender Lee parker
Re: Wire bondable gold pads
Lee parker
Wed, 11 Jan 2006 10:29:21 -0500
Re: Soldermask Tolerance
Lee parker
Wed, 25 Jan 2006 08:56:36 -0500
Re: LPI - matte vs. gloss or semi-gloss
Lee parker
Mon, 23 Jan 2006 13:30:59 -0500
Re: enig bad board
Lee Parker
Sat, 14 Jan 2006 11:31:09 -0500
Re: enig bad board
Lee Parker
Fri, 13 Jan 2006 12:34:59 -0500
Re: Drill and plated hole callouts
Lee parker
Tue, 17 Jan 2006 16:32:31 -0500
New Sender Lance Mayes
Re: Definition
Lance Mayes
Mon, 23 Jan 2006 08:39:28 -0700
New Sender kwood716
Re: What is a .pho file
kwood716
Tue, 10 Jan 2006 22:20:59 -0500
New Sender Kevin Glidden
Swaged hardware on MCPCB
Kevin Glidden
Mon, 9 Jan 2006 11:52:56 -0500
Humidity Cure Chambers
Kevin Glidden
Mon, 23 Jan 2006 09:39:39 -0500
New Sender Kerry McMullen
Re: What is a .pho file
Kerry McMullen
Tue, 10 Jan 2006 09:37:54 -0500
What is a .pho file
Kerry McMullen
Tue, 10 Jan 2006 09:12:12 -0500
Re: Pad Damage, Leave it alone, or fix it?
Kerry McMullen
Wed, 25 Jan 2006 16:11:11 -0500
Re: Pad Damage, Leave it alone, or fix it?
Kerry McMullen
Wed, 25 Jan 2006 15:17:36 -0500
Re: Large SMT physical failure prevention
Kerry McMullen
Tue, 31 Jan 2006 12:02:05 -0500
New Sender Kelly Morris
Re: Conforma Coat (Urethane) & bubbles
Kelly Morris
Tue, 24 Jan 2006 12:22:42 -0600
Conforma Coat (Urethane) & bubbles
Kelly Morris
Tue, 24 Jan 2006 09:25:25 -0600
New Sender Kathy
sulfur free paper
Kathy
Mon, 9 Jan 2006 13:41:36 -0800
New Sender Kane, Joseph E (US SSA)
Re: Conformal Coatings
Kane, Joseph E (US SSA)
Fri, 6 Jan 2006 15:34:22 -0500
New Sender Kane, Amol (349)
Re: RoHS board finish
Kane, Amol (349)
Wed, 18 Jan 2006 15:31:44 -0500
Re: RoHS board finish
Kane, Amol (349)
Wed, 18 Jan 2006 14:53:57 -0500
Re: RoHS board finish
Kane, Amol (349)
Wed, 18 Jan 2006 14:48:45 -0500
Re: Question about expoxies
Kane, Amol (349)
Thu, 19 Jan 2006 11:40:44 -0500
Re: Humiseal conformal coating
Kane, Amol (349)
Wed, 25 Jan 2006 10:49:52 -0500
Re: How to use XRF?
Kane, Amol (349)
Fri, 6 Jan 2006 13:22:38 -0500
Re: Conformal Coatings
Kane, Amol (349)
Fri, 6 Jan 2006 13:20:32 -0500
Re: Conforma Coat (Urethane) & bubbles
Kane, Amol (349)
Tue, 24 Jan 2006 11:04:28 -0500
Re: Conforma Coat (Urethane) & bubbles
Kane, Amol (349)
Tue, 24 Jan 2006 11:03:07 -0500
Re: Building a lead free board (with PB free BGA with eutectic solder
Kane, Amol (349)
Thu, 19 Jan 2006 08:25:18 -0500
Re: baking moisture sensitive components
Kane, Amol (349)
Tue, 24 Jan 2006 15:03:10 -0500
Re: Any comments?
Kane, Amol (349)
Thu, 12 Jan 2006 16:21:53 -0500
New Sender Juan T. Marugán
Re: Soldering Weights
Juan T. Marugán
Thu, 26 Jan 2006 00:56:03 -0600
New Sender Joyce Koo
Re: Wire bondable gold pads
Joyce Koo
Wed, 11 Jan 2006 11:30:14 -0500
Re: Question about expoxies
Joyce Koo
Thu, 19 Jan 2006 13:44:43 -0500
non-corrosive detergent
Joyce Koo
Mon, 2 Jan 2006 11:30:45 -0500
Re: Humidity Cure Chambers
Joyce Koo
Mon, 23 Jan 2006 09:59:33 -0500
Re: How to use XRF?
Joyce Koo
Fri, 6 Jan 2006 13:09:38 -0500
Re: Definition
Joyce Koo
Mon, 23 Jan 2006 09:18:28 -0500
New Sender Joseph H. Smith
Re: Manual conformal coat dipping process
Joseph H. Smith
Thu, 12 Jan 2006 11:05:51 -0500
Re: Manual conformal coat dipping process
Joseph H. Smith
Tue, 10 Jan 2006 17:08:50 -0500
Re: Manual conformal coat dipping process
Joseph H. Smith
Tue, 10 Jan 2006 17:05:34 -0500
Manual conformal coat dipping process
Joseph H. Smith
Tue, 10 Jan 2006 16:40:54 -0500
Re: Conformal Coat (Urethane) & bubbles
Joseph H. Smith
Wed, 25 Jan 2006 10:47:19 -0500
New Sender jose
Re: Gold over Tin
jose
Thu, 5 Jan 2006 14:47:42 -0800
New Sender Jose Marroquin
Solder Paste
Jose Marroquin
Fri, 13 Jan 2006 13:57:04 -0800
New Sender Jon McDowell
Re: Pansert AVKII through hole diameter?
Jon McDowell
Mon, 30 Jan 2006 08:00:46 -0700
Pansert AVKII through hole diameter?
Jon McDowell
Fri, 27 Jan 2006 16:18:40 -0700
Optimum dia of thru-holes
Jon McDowell
Mon, 30 Jan 2006 12:08:16 -0700
New Sender John Parsons
Re: <List>Re: [TN] Drill and plated hole callouts
John Parsons
Wed, 18 Jan 2006 08:06:10 -0800
New Sender John Maxwell
Re: Large SMT physical failure prevention
John Maxwell
Tue, 31 Jan 2006 09:42:05 -0800
New Sender John Foster
Question about expoxies
John Foster
Thu, 19 Jan 2006 08:31:32 -0800
New Sender John Burris
Re: Soldering matte tin over nickel plating NTC
John Burris
Fri, 20 Jan 2006 08:34:34 -0500
Soldering matte tin over nickel plating
John Burris
Thu, 19 Jan 2006 09:54:07 -0500
Re: Large SMT physical failure prevention
John Burris
Tue, 31 Jan 2006 11:57:00 -0500
New Sender John Burke
Re: Thiourea
John Burke
Tue, 3 Jan 2006 12:28:00 -0800
Re: sulfur free paper
John Burke
Mon, 9 Jan 2006 13:57:45 -0800
Re: Soldering matte tin over nickel plating NTC
John Burke
Fri, 20 Jan 2006 08:54:24 -0800
Re: Soldering matte tin over nickel plating
John Burke
Thu, 19 Jan 2006 15:16:03 -0800
RoHS data compliance "how to" article
John Burke
Tue, 31 Jan 2006 09:43:28 -0800
Re: RoHS board finish
John Burke
Wed, 18 Jan 2006 11:50:24 -0800
Re: RoHS board finish
John Burke
Wed, 18 Jan 2006 09:55:02 -0800
Re: PWB SMT pad retention
John Burke
Thu, 19 Jan 2006 14:35:12 -0800
Re: Pansert AVKII through hole diameter?
John Burke
Mon, 30 Jan 2006 10:30:59 -0800
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
John Burke
Wed, 18 Jan 2006 16:11:34 -0800
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
John Burke
Wed, 18 Jan 2006 13:14:43 -0800
Re: Laminate material
John Burke
Mon, 23 Jan 2006 14:12:59 -0800
Laminate material
John Burke
Fri, 20 Jan 2006 15:25:43 -0800
Re: Image transfer
John Burke
Mon, 9 Jan 2006 09:49:43 -0800
Re: enig bad board
John Burke
Fri, 13 Jan 2006 08:51:59 -0800
Re: DIP pic
John Burke
Tue, 3 Jan 2006 14:45:09 -0800
Re: Definition
John Burke
Thu, 26 Jan 2006 14:57:03 -0800
Re: Definition
John Burke
Mon, 23 Jan 2006 08:42:47 -0800
Re: Definition
John Burke
Fri, 20 Jan 2006 15:05:18 -0800
Re: Conforma Coat (Urethane) & bubbles
John Burke
Tue, 24 Jan 2006 10:29:22 -0800
Re: Any comments?
John Burke
Thu, 12 Jan 2006 08:24:32 -0800
New Sender Joel Mearig
Time before Cleaning WS Flux
Joel Mearig
Wed, 18 Jan 2006 13:42:32 -0800
Re: Pad Damage, Leave it alone, or fix it?
Joel Mearig
Wed, 25 Jan 2006 12:47:14 -0800
New Sender Joel Alexander
Re: Manual conformal coat dipping process
Joel Alexander
Tue, 10 Jan 2006 17:12:51 -0500
Re: Any comments?
Joel Alexander
Thu, 12 Jan 2006 16:57:21 -0500
Re: Any comments?
Joel Alexander
Thu, 12 Jan 2006 16:19:10 -0500
New Sender Joe Russeau
Fw: [TN] Testing for Thiourea
Joe Russeau
Tue, 3 Jan 2006 14:30:36 -0500
Test Lab for Thiourea
Joe Russeau
Tue, 3 Jan 2006 13:47:35 -0500
Re: System International Units versus Imperial English units??
Joe Russeau
Tue, 10 Jan 2006 15:21:48 -0500
Re: Question about expoxies
Joe Russeau
Thu, 19 Jan 2006 14:37:01 -0500
Re: Older Blue-M ovens.
Joe Russeau
Fri, 27 Jan 2006 09:56:08 -0500
Re: Definition
Joe Russeau
Tue, 24 Jan 2006 15:07:06 -0500
New Sender Joe Fjelstad
NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Joe Fjelstad
Wed, 18 Jan 2006 15:46:19 EST
New Sender Jim Gleason
Re: Soldering Weights
Jim Gleason
Wed, 25 Jan 2006 21:04:37 -0600
New Sender Jerry Dengler
Re: SMEMA to SMP1
Jerry Dengler
Tue, 10 Jan 2006 13:20:01 -0500
Re: <List>[TN] Panelization of backplanes
Jerry Dengler
Thu, 19 Jan 2006 16:06:56 -0500
New Sender Jeffrey Bush
Re: WEEE symbol
Jeffrey Bush
Mon, 9 Jan 2006 11:29:13 -0500
Re: Thermal dissipation factor
Jeffrey Bush
Mon, 9 Jan 2006 08:33:41 -0500
Re: sulfur free paper
Jeffrey Bush
Tue, 10 Jan 2006 07:52:33 -0500
Re: Soldermask Tolerance
Jeffrey Bush
Wed, 25 Jan 2006 08:22:22 -0500
Re: RoHS board finish
Jeffrey Bush
Wed, 18 Jan 2006 16:39:32 -0500
Re: PWB SMT pad retention
Jeffrey Bush
Fri, 20 Jan 2006 08:48:29 -0500
Re: PWB SMT pad retention
Jeffrey Bush
Thu, 19 Jan 2006 13:43:24 -0500
Re: Plugged via issue
Jeffrey Bush
Thu, 19 Jan 2006 13:35:55 -0500
Re: Pad Damage, Leave it alone, or fix it?
Jeffrey Bush
Wed, 25 Jan 2006 15:50:14 -0500
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Jeffrey Bush
Wed, 18 Jan 2006 16:43:25 -0500
Re: lpi soldermask
Jeffrey Bush
Tue, 31 Jan 2006 08:53:15 -0500
Re: LPI - matte vs. gloss or semi-gloss
Jeffrey Bush
Tue, 24 Jan 2006 08:54:46 -0500
Re: Laminate material
Jeffrey Bush
Mon, 23 Jan 2006 08:49:26 -0500
Re: Immersion Gold and LF PROCESS
Jeffrey Bush
Thu, 26 Jan 2006 10:12:26 -0500
New Sender Jason Gregory
Water-soluble spacers/standoffs
Jason Gregory
Mon, 9 Jan 2006 12:50:54 -0600
Re: Test Lab for Thiourea
Jason Gregory
Tue, 3 Jan 2006 13:50:00 -0600
Re: Solder "Stop the Wicking" Plugs
Jason Gregory
Wed, 4 Jan 2006 08:48:40 -0600
Re: <List>[TN] Panelization of backplanes
Jason Gregory
Thu, 19 Jan 2006 14:52:19 -0600
New Sender Jack Crawford
Re: System International Units versus Imperial English units ??
Jack Crawford
Wed, 11 Jan 2006 16:23:26 -0600
New Sender Ivanoe Pedruzzi
Re: WEEE symbol
Ivanoe Pedruzzi
Tue, 10 Jan 2006 17:24:21 +0100
Re: Immersion Gold and LF PROCESS
Ivanoe Pedruzzi
Thu, 26 Jan 2006 10:41:01 +0100
Re: enig bad board
Ivanoe Pedruzzi
Tue, 17 Jan 2006 10:13:06 +0100
Dissolution rates and solder paste selection
Ivanoe Pedruzzi
Mon, 16 Jan 2006 11:38:00 +0100
New Sender IPC Mail
NTC-APEX/Expo Savings Deadlines Approaching
IPC Mail
Thu, 5 Jan 2006 17:01:07 -0600
New Sender Happy Holden
Re: Trace Resistance
Happy Holden
Thu, 26 Jan 2006 09:56:30 -0500
Re: PWB Buried/Blind Via Technology
Happy Holden
Mon, 16 Jan 2006 12:55:38 -0500
Re: Optimum dia of thru-holes
Happy Holden
Mon, 30 Jan 2006 16:10:56 -0500
Re: Laminate material
Happy Holden
Sat, 21 Jan 2006 09:39:50 -0500
Re: Impedance/ Diff pairs/ layer stack up calculator?
Happy Holden
Sat, 28 Jan 2006 14:48:05 -0500
Re: Gold over Tin
Happy Holden
Thu, 5 Jan 2006 14:06:58 -0500
Re: Au & Photoresist Thickness Measurement
Happy Holden
Tue, 31 Jan 2006 12:36:36 -0500
New Sender Guy Ramsey
Re: Prepping Stranded Litz wire for soldering...
Guy Ramsey
Mon, 30 Jan 2006 11:57:01 -0500
New Sender Graham Naisbitt
Re: Water Solvable Mask
Graham Naisbitt
Mon, 9 Jan 2006 18:14:25 +0000
Re: System International Units versus Imperial English units??
Graham Naisbitt
Wed, 11 Jan 2006 18:05:50 +0000
Re: Manual conformal coat dipping process
Graham Naisbitt
Wed, 11 Jan 2006 14:13:42 +0000
Re: Manual conformal coat dipping process
Graham Naisbitt
Wed, 11 Jan 2006 13:59:56 +0000
Re: Definition
Graham Naisbitt
Mon, 23 Jan 2006 22:15:38 +0000
New Sender Graham Collins
SMEMA to SMP1
Graham Collins
Tue, 10 Jan 2006 12:45:19 -0500
New Sender gina hernefjord
SV: [TN] SMT Connector Assembly Question
gina hernefjord
Wed, 11 Jan 2006 17:19:37 +0100
New Sender Gervascio, Thomas
Re: Soldering Weights
Gervascio, Thomas
Wed, 25 Jan 2006 12:47:58 -0500
Hot bar/Laser soldering of QFPs
Gervascio, Thomas
Wed, 11 Jan 2006 17:24:11 -0500
New Sender Gerard O'Brien
Re: Immersion Gold and LF PROCESS
Gerard O'Brien
Tue, 24 Jan 2006 13:18:26 -0500
New Sender Gerald Gagnon
Re: RoHS board finish
Gerald Gagnon
Sat, 21 Jan 2006 13:49:46 -0500
Re: Panelization of backplanes
Gerald Gagnon
Sat, 21 Jan 2006 13:02:06 -0500
New Sender George Milad
Re: Immersion Gold and LF PROCESS
George Milad
Thu, 26 Jan 2006 17:28:10 EST
Re: Immersion Gold and LF PROCESS
George Milad
Tue, 24 Jan 2006 21:46:40 EST
Re: ENEPIG and LF PROCESS
George Milad
Fri, 27 Jan 2006 15:22:44 EST
New Sender George Carroll
Humiseal conformal coating
George Carroll
Wed, 25 Jan 2006 09:45:44 -0500
Re: Conforma Coat (Urethane) & bubbles
George Carroll
Tue, 24 Jan 2006 16:33:48 -0500
New Sender Genny Gibbard
Re: WEEE symbol
Genny Gibbard
Tue, 10 Jan 2006 10:45:31 -0600
Re: WEEE symbol
Genny Gibbard
Mon, 9 Jan 2006 10:25:27 -0600
Re: WEEE symbol
Genny Gibbard
Mon, 9 Jan 2006 10:14:34 -0600
Re: RoHS board finish
Genny Gibbard
Wed, 18 Jan 2006 11:58:31 -0600
Any comments?
Genny Gibbard
Thu, 12 Jan 2006 10:13:11 -0600
New Sender Garry Morand
Re: Drill and plated hole callouts
Garry Morand
Tue, 17 Jan 2006 08:39:22 -0500
New Sender Frederick Miller
Re: Older Blue-M ovens.
Frederick Miller
Fri, 27 Jan 2006 09:53:52 -0500
New Sender Franklin D Asbell
Re: Soldermask Tolerance
Franklin D Asbell
Wed, 25 Jan 2006 08:34:47 -0600
Re: Soldermask Tolerance
Franklin D Asbell
Wed, 25 Jan 2006 07:28:15 -0600
Re: Drill and plated hole callouts
Franklin D Asbell
Mon, 16 Jan 2006 17:49:44 -0600
New Sender Franklin Asbell
Re: How to use XRF?
Franklin Asbell
Fri, 6 Jan 2006 13:18:37 -0600
Gold over Tin
Franklin Asbell
Thu, 5 Jan 2006 12:57:44 -0600
New Sender Fox, Ian
Re: enig bad board
Fox, Ian
Tue, 17 Jan 2006 09:17:23 -0000
Re: Drill and plated hole callouts
Fox, Ian
Tue, 17 Jan 2006 08:25:42 -0000
New Sender Eric CHRISTISON
Re: System International Units versus Imperial English units??
Eric CHRISTISON
Wed, 11 Jan 2006 14:16:00 -0000
Re: Soldering Weights
Eric CHRISTISON
Wed, 25 Jan 2006 16:54:31 -0000
New Sender Efendy Wijaya
SVS 8200
Efendy Wijaya
Thu, 26 Jan 2006 16:58:43 -0800
New Sender Eddie Rocha
Re: sulfur free paper
Eddie Rocha
Mon, 9 Jan 2006 15:28:52 -0700
Re: Rocha Laminate Voids..
Eddie Rocha
Thu, 5 Jan 2006 09:21:29 -0700
Re: Rocha Laminate Voids..
Eddie Rocha
Wed, 4 Jan 2006 17:11:19 -0700
Re: Drill and plated hole callouts
Eddie Rocha
Tue, 17 Jan 2006 11:34:28 -0700
Re: <List>Re: [TN] Drill and plated hole callouts
Eddie Rocha
Tue, 17 Jan 2006 15:59:57 -0700
New Sender Dwight Mattix
Re: Immersion Gold and LF PROCESS
Dwight Mattix
Thu, 26 Jan 2006 11:52:02 -0800
Re: Drill and plated hole callouts
Dwight Mattix
Tue, 17 Jan 2006 15:34:30 -0800
Re: Drill and plated hole callouts
Dwight Mattix
Tue, 17 Jan 2006 07:22:58 -0800
New Sender Douglas O. Pauls
Re: Testing for Thiourea
Douglas O. Pauls
Tue, 3 Jan 2006 13:14:06 -0600
Re: System International Units versus Imperial English units??
Douglas O. Pauls
Wed, 11 Jan 2006 13:11:29 -0600
Re: System International Units versus Imperial English units??
Douglas O. Pauls
Wed, 11 Jan 2006 10:31:58 -0600
Re: Soldering matte tin over nickel plating
Douglas O. Pauls
Thu, 19 Jan 2006 17:01:14 -0600
Re: Manual conformal coat dipping process
Douglas O. Pauls
Wed, 11 Jan 2006 10:28:28 -0600
Re: Definition
Douglas O. Pauls
Thu, 26 Jan 2006 17:03:43 -0600
Re: Definition
Douglas O. Pauls
Thu, 26 Jan 2006 16:42:35 -0600
Re: Definition
Douglas O. Pauls
Tue, 24 Jan 2006 13:33:32 -0600
Re: Definition
Douglas O. Pauls
Mon, 23 Jan 2006 10:03:23 -0600
Definition
Douglas O. Pauls
Fri, 20 Jan 2006 16:54:43 -0600
Re: Conforma Coat (Urethane) & bubbles
Douglas O. Pauls
Tue, 24 Jan 2006 09:34:07 -0600
New Sender Dehoyos, Ramon
FW: [TN] Wire Harness Repair Standard
Dehoyos, Ramon
Tue, 17 Jan 2006 12:03:05 -0500
Re: Wire Harness Repair Standard
Dehoyos, Ramon
Tue, 17 Jan 2006 11:02:49 -0500
Re: Wire Harness Repair Standard
Dehoyos, Ramon
Mon, 16 Jan 2006 14:53:51 -0500
Re: Soldered J lead components vs socketed
Dehoyos, Ramon
Fri, 27 Jan 2006 15:24:39 -0500
Re: RoHS board finish
Dehoyos, Ramon
Wed, 18 Jan 2006 15:41:39 -0500
Re: RoHS board finish
Dehoyos, Ramon
Wed, 18 Jan 2006 15:32:12 -0500
Re: RoHS board finish
Dehoyos, Ramon
Wed, 18 Jan 2006 15:14:44 -0500
Re: Prepping Stranded Litz wire for soldering...
Dehoyos, Ramon
Mon, 30 Jan 2006 12:39:37 -0500
Re: Plugged via issue
Dehoyos, Ramon
Thu, 19 Jan 2006 13:46:16 -0500
Re: Pansert AVKII through hole diameter?
Dehoyos, Ramon
Mon, 30 Jan 2006 10:12:59 -0500
Re: Panelization of backplanes
Dehoyos, Ramon
Mon, 23 Jan 2006 08:23:21 -0500
Re: Pad Damage, Leave it alone, or fix it?
Dehoyos, Ramon
Wed, 25 Jan 2006 16:26:35 -0500
Re: Optimum dia of thru-holes
Dehoyos, Ramon
Tue, 31 Jan 2006 08:16:36 -0500
Re: Optimum dia of thru-holes
Dehoyos, Ramon
Mon, 30 Jan 2006 16:08:13 -0500
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Dehoyos, Ramon
Thu, 19 Jan 2006 08:38:53 -0500
Re: NTC 8 Monkeys (was going to save this till Friday but why not break the rules?)
Dehoyos, Ramon
Thu, 19 Jan 2006 08:35:35 -0500
Lead Free
Dehoyos, Ramon
Tue, 31 Jan 2006 10:42:50 -0500
Re: Humidity Cure Chambers
Dehoyos, Ramon
Mon, 23 Jan 2006 13:23:41 -0500
Re: Heller 1500W Oven
Dehoyos, Ramon
Thu, 26 Jan 2006 13:44:46 -0500
Re: Conformal Coat (Urethane) & bubbles
Dehoyos, Ramon
Tue, 24 Jan 2006 16:33:37 -0500
Re: baking moisture sensitive components
Dehoyos, Ramon
Tue, 24 Jan 2006 14:04:02 -0500
Re: <List>[TN] Panelization of backplanes
Dehoyos, Ramon
Fri, 20 Jan 2006 09:00:00 -0500
New Sender Davis, Larry
Re: Image transfer
Davis, Larry
Mon, 9 Jan 2006 10:10:45 -0800
New Sender David Tremmel
Re: System International Units versus Imperial English units??
David Tremmel
Wed, 11 Jan 2006 14:22:16 -0600
New Sender David Ricketts
Re: Drill and plated hole callouts
David Ricketts
Tue, 17 Jan 2006 14:59:36 -0800
New Sender David D. Hillman
Re: Time to fish or cut bait
David D. Hillman
Wed, 18 Jan 2006 14:38:49 -0600
Re: Soldering matte tin over nickel plating NTC
David D. Hillman
Thu, 19 Jan 2006 17:12:39 -0600
Re: Soldering matte tin over nickel plating
David D. Hillman
Thu, 19 Jan 2006 16:30:22 -0600
Re: Solder "Stop the Wicking" Plugs
David D. Hillman
Wed, 4 Jan 2006 13:05:36 -0600
Re: Solder "Stop the Wicking" Plugs
David D. Hillman
Wed, 4 Jan 2006 08:25:50 -0600
Re: Solder "Stop the Wicking" Plugs
David D. Hillman
Wed, 4 Jan 2006 07:58:25 -0600
Solder "Stop the Wicking" Plugs
David D. Hillman
Tue, 3 Jan 2006 16:31:21 -0600
Re: RoHS board finish
David D. Hillman
Wed, 18 Jan 2006 11:54:38 -0600
Re: Immersion Gold and LF PROCESS
David D. Hillman
Wed, 25 Jan 2006 08:05:35 -0600
Re: Immersion Gold and LF PROCESS
David D. Hillman
Tue, 24 Jan 2006 12:52:09 -0600
Re: Dissolution rates and solder paste selection
David D. Hillman
Mon, 16 Jan 2006 11:56:24 -0600
New Sender Dave Dixon
Re: Definition
Dave Dixon
Fri, 20 Jan 2006 16:58:59 -0600
New Sender Darrel Therriault
Re: System International Units versus Imperial English units??
Darrel Therriault
Tue, 10 Jan 2006 12:24:29 -0800
New Sender Creswick, Steven
Re: Wire bondable gold pads
Creswick, Steven
Wed, 11 Jan 2006 12:24:47 -0500
Re: Gold over Tin
Creswick, Steven
Fri, 6 Jan 2006 06:00:30 -0500
New Sender Crepeau, Phil (Space Technology)
Re: lpi soldermask
Crepeau, Phil (Space Technology)
Tue, 31 Jan 2006 07:48:28 -0800
lpi soldermask
Crepeau, Phil (Space Technology)
Mon, 30 Jan 2006 16:32:48 -0800
Re: Definition
Crepeau, Phil (Space Technology)
Fri, 20 Jan 2006 15:17:14 -0800
New Sender Craig Sullivan
Re: Trace Resistance
Craig Sullivan
Thu, 26 Jan 2006 07:46:23 -0500
New Sender Chris Schaefer
Bin/ Tote Aqueous Washer
Chris Schaefer
Wed, 4 Jan 2006 10:30:55 -0600
New Sender Chris Ball
Re: Pansert AVKII through hole diameter?
Chris Ball
Mon, 30 Jan 2006 16:31:20 -0500
Re: LPI - matte vs. gloss or semi-gloss
Chris Ball
Tue, 24 Jan 2006 07:42:33 -0500
LPI - matte vs. gloss or semi-gloss
Chris Ball
Mon, 23 Jan 2006 13:02:41 -0500
New Sender Cheryl Johnson
Re: System International Units versus Imperial English units??
Cheryl Johnson
Wed, 11 Jan 2006 12:54:59 -0700
New Sender Brooks,Bill
Impedance/ Diff pairs/ layer stack up calculator?
Brooks,Bill
Fri, 27 Jan 2006 15:25:27 -0800
New Sender Brian Pulis
Soldermask Tolerance
Brian Pulis
Wed, 25 Jan 2006 13:16:36 +0100
New Sender Brian Ellis
Re: Time before Cleaning WS Flux
Brian Ellis
Tue, 24 Jan 2006 13:29:48 +0200
Re: Time before Cleaning WS Flux
Brian Ellis
Fri, 20 Jan 2006 12:15:43 +0200
Re: Time before Cleaning WS Flux
Brian Ellis
Thu, 19 Jan 2006 10:50:05 +0200
Re: Thiourea
Brian Ellis
Wed, 4 Jan 2006 09:29:54 +0200
Re: System International Units versus Imperial English units??
Brian Ellis
Wed, 11 Jan 2006 11:30:08 +0200
Re: Solder Wettability Problem
Brian Ellis
Mon, 9 Jan 2006 10:35:32 +0200
Re: Manual conformal coat dipping process
Brian Ellis
Wed, 11 Jan 2006 10:54:33 +0200
Re: Humidity Cure Chambers
Brian Ellis
Mon, 23 Jan 2006 17:42:47 +0200
Re: Gold over Tin
Brian Ellis
Fri, 6 Jan 2006 11:47:03 +0200
Re: Definition
Brian Ellis
Mon, 23 Jan 2006 17:23:26 +0200
New Sender Bremer, Gary
Re: Soldering Weights
Bremer, Gary
Wed, 25 Jan 2006 09:00:42 -0800
Re: Mil Spec Downloads
Bremer, Gary
Tue, 3 Jan 2006 07:54:10 -0800
New Sender Brad Saunders
Re: What is a .pho file
Brad Saunders
Tue, 10 Jan 2006 22:16:24 -0500
Re: Press Fit Pins / Compliance Pins
Brad Saunders
Tue, 10 Jan 2006 23:34:15 -0500
Re: Conformal Coatings
Brad Saunders
Fri, 6 Jan 2006 13:55:44 -0500
Re: Compliance Pins
Brad Saunders
Fri, 6 Jan 2006 13:45:07 -0500
New Sender Bob Wilson
Drill and plated hole callouts
Bob Wilson
Mon, 16 Jan 2006 15:05:49 -0800
New Sender bob wettermann
Re: Pad Damage, Leave it alone, or fix it?
bob wettermann
Thu, 26 Jan 2006 11:03:28 -0800
New Sender Bob Walker
baking moisture sensitive components
Bob Walker
Tue, 24 Jan 2006 11:12:15 EST
New Sender Bob K Veale
Bob K Veale/Cleveland/RA/Rockwell is out of the office.
Bob K Veale
Fri, 13 Jan 2006 00:20:10 -0600
New Sender Bloomquist, Ken
Re: Soldering Weights
Bloomquist, Ken
Wed, 25 Jan 2006 09:38:21 -0800
Re: Pad Damage, Leave it alone, or fix it?
Bloomquist, Ken
Wed, 25 Jan 2006 13:37:22 -0800
Re: Conformal Coat (Urethane) & bubbles
Bloomquist, Ken
Tue, 24 Jan 2006 12:15:19 -0800
New Sender Blomberg, Rainer (FL51)
Re: Seeking Information on Test for Pb content in SnPb finis hed component leads
Blomberg, Rainer (FL51)
Thu, 5 Jan 2006 08:09:54 -0700
Re: Conforma Coat (Urethane) & bubbles
Blomberg, Rainer (FL51)
Tue, 24 Jan 2006 08:54:33 -0700
New Sender Blair K. Hogg
Re: Trace Resistance
Blair K. Hogg
Thu, 26 Jan 2006 08:30:52 -0800
Re: Conforma Coat (Urethane) & bubbles
Blair K. Hogg
Tue, 24 Jan 2006 07:39:44 -0800
New Sender Bill Coleman
Re: Paste In-Hole process
Bill Coleman
Fri, 6 Jan 2006 07:25:43 -0700
New Sender Bev Christian
Re: Solder Paste
Bev Christian
Fri, 13 Jan 2006 17:06:26 -0500
Re: Solder "Stop the Wicking" Plugs
Bev Christian
Wed, 4 Jan 2006 08:38:08 -0500
Hard gold question
Bev Christian
Thu, 26 Jan 2006 11:59:03 -0500
New Sender Barry Gallegos
Pick and Place machine
Barry Gallegos
Mon, 9 Jan 2006 07:12:37 -0700
New Sender Barmuta, Mike
Re: Water Solvable Mask
Barmuta, Mike
Mon, 9 Jan 2006 10:32:20 -0800
Re: RoHS board finish
Barmuta, Mike
Wed, 18 Jan 2006 10:43:49 -0800
New Sender Babcock John
Re: Large SMT physical failure prevention
Babcock John
Tue, 31 Jan 2006 08:39:43 -0800
Conformal Coatings
Babcock John
Fri, 6 Jan 2006 09:58:08 -0800
New Sender Anil Kher
glass photo tools need help
Anil Kher
Thu, 12 Jan 2006 12:28:07 +0530
New Sender Ahne Oosterhof
Re: System International Units versus Imperial English units??
Ahne Oosterhof
Wed, 11 Jan 2006 07:39:21 -0800
Re: Prepping Stranded Litz wire for soldering...
Ahne Oosterhof
Mon, 30 Jan 2006 09:21:12 -0800
Re: Pick and Place machine
Ahne Oosterhof
Tue, 10 Jan 2006 08:09:30 -0800
New Sender <>
Re: Time to fish or cut bait
<>
Wed, 18 Jan 2006 17:26:02 EST
Re: Time before Cleaning WS Flux
<>
Thu, 19 Jan 2006 11:59:18 EST
Re: Time before Cleaning WS Flux
<>
Wed, 18 Jan 2006 17:47:11 EST
Re: Testing for Thiourea
<>
Wed, 4 Jan 2006 01:38:54 EST
Re: PWB SMT pad retention
<>
Fri, 20 Jan 2006 17:36:14 EST
Re: PWB SMT pad retention
<>
Fri, 20 Jan 2006 17:27:22 EST
Lavenir Question
<>
Mon, 23 Jan 2006 12:10:54 EST
Re: Immersion Gold and LF PROCESS
<>
Wed, 25 Jan 2006 20:37:55 EST
Re: Immersion Gold and LF PROCESS
<>
Tue, 24 Jan 2006 19:26:35 EST
Re: Hot bar/Laser soldering of QFPs
<>
Wed, 11 Jan 2006 23:13:49 EST
New Sender - Bogert
Re: Soldered J lead components vs socketed
- Bogert
Sat, 28 Jan 2006 12:29:57 -0500
Seeking Information on Test for Pb content in SnPb finished component leads
- Bogert
Wed, 4 Jan 2006 19:02:20 -0500

ATOM RSS1 RSS2