LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Ofer Cohen

Sat, 7 May 2005 08:41:25 +0200

Blair K. Hogg

Fri, 6 May 2005 13:06:39 -0700

David D. Hillman

Fri, 6 May 2005 12:53:14 -0500

Kerry McMullen

Fri, 6 May 2005 13:29:20 -0400

David Greig

Fri, 6 May 2005 18:24:52 +0100

Paul Edwards

Fri, 6 May 2005 10:16:40 -0700

0402 issues

Frank Kimmey

Fri, 6 May 2005 10:05:21 -0700

0402 pad layout

Re: 0402 pad layout

Judy Brown

Wed, 11 May 2005 10:59:50 -0700

18 Layer Boards

Re: 18 Layer Boards

Jeffrey Bush

Mon, 2 May 2005 07:44:49 -0400

20-degree bevel blade

Bernard Kessler

Mon, 9 May 2005 10:43:09 -0700

Tuan Le

Mon, 9 May 2005 09:56:07 -0700

Mike Fenner

Fri, 6 May 2005 13:39:17 +0100

Jeffrey Bush

Fri, 6 May 2005 08:25:21 -0400

Matthew Lamkin

Fri, 6 May 2005 10:37:29 +0100

Matthew Lamkin

Fri, 6 May 2005 10:28:46 +0100

Tuan Le

Thu, 5 May 2005 14:19:18 -0700

about the surface finish of the substrate in FC-BGA

Jeffrey Bush

Thu, 5 May 2005 13:18:16 -0400

20-degree bevel blade

Tuan Le

Thu, 5 May 2005 09:24:40 -0700

Don Van Patten

Tue, 17 May 2005 19:33:42 GMT

liusunny

Fri, 27 May 2005 13:31:35 +0800

Accidental Short draws current

Re: Accidental Short draws current

Johnson, Joseph SEA

Thu, 5 May 2005 07:53:58 -0400

Re: Accidental Short draws current

Brian Ellis

Wed, 4 May 2005 10:03:31 +0300

Re: Accidental Short draws current

Dave Seymour

Tue, 3 May 2005 16:45:53 -0400

Accidental Short draws current

Pete menuez

Tue, 3 May 2005 16:40:09 -0400

Ag Through Hole

Atkinson, Neil

Tue, 17 May 2005 12:06:42 +0100

Annular ring:- What should we sign up for ????

Re: Annular ring:- What should we sign up for ????

Jeffrey Bush

Tue, 3 May 2005 16:36:05 -0400

Re: Annular ring:- What should we sign up for ????

COOKE, ROBERT W. (JSC-NX) (WGI)

Tue, 3 May 2005 13:37:00 -0500

Annular ring:- What should we sign up for ????

Tue, 3 May 2005 13:55:50 EDT

Antw: Re: [TN] Suggested failure analysis technique?

Guenter Grossmann

Tue, 10 May 2005 15:14:06 +0200

Antw: [TN] Lead-Free solder for wave solder machine

Re: Antw: [TN] Lead-Free solder for wave solder machine

Kaye Clayo

Fri, 13 May 2005 10:56:55 -0400

Antw: [TN] Lead-Free solder for wave solder machine

Guenter Grossmann

Fri, 13 May 2005 09:09:11 +0200

Antw: [TN] micro cracks in leadfree wavesolder

Guenter Grossmann

Mon, 30 May 2005 09:00:10 +0200

AOI machine

Le Thanh Tung

Tue, 10 May 2005 15:00:22 +0700

Archive updates

Re: Archive updates

Blair K. Hogg

Thu, 26 May 2005 12:35:48 -0700

Archive updates

Larry Russell

Tue, 24 May 2005 09:35:00 +0800

Articles on NOT Outsourcing to foreign shores

Joyce Koo

Thu, 12 May 2005 14:10:43 -0400

Gene Felder

Thu, 12 May 2005 08:30:06 -0700

Joyce Koo

Wed, 11 May 2005 17:20:45 -0400

Paul Edwards

Wed, 11 May 2005 11:40:37 -0700

Gene Felder

Wed, 11 May 2005 13:49:27 -0700

Roland Jaquet

Wed, 11 May 2005 19:34:39 +0200

Bev Christian

Wed, 11 May 2005 12:23:17 -0400

Phil Nutting

Wed, 11 May 2005 12:19:26 -0400

Jeffrey Bush

Wed, 11 May 2005 11:19:29 -0400

Phil Nutting

Wed, 11 May 2005 10:42:22 -0400

Articles on NOT Outsourcing to foreign shores

Kaye Clayo

Wed, 11 May 2005 10:04:09 -0400

Bev Christian

Wed, 11 May 2005 09:48:31 -0400

ATI buffers

Re: ATI buffers

Roach, David

Tue, 17 May 2005 11:18:23 -0500

Re: ATI buffers

Jerry Dengler

Tue, 17 May 2005 12:03:10 -0400

ATI buffers

Gary Camac

Tue, 17 May 2005 10:51:14 -0500

Atlanta Chapter Invitation for Picnic - Hope you can come

Christi Poulsen

Thu, 26 May 2005 13:18:04 -0500

battery powered soldering iron

Joyce Koo

Thu, 5 May 2005 15:40:49 -0400

Joyce Koo

Thu, 5 May 2005 15:37:59 -0400

Thorup, John

Thu, 5 May 2005 12:08:28 -0700

John Burke

Thu, 5 May 2005 12:04:56 -0700

battery powered soldering iron

Matthias Mansfeld

Thu, 5 May 2005 20:29:20 +0200

Joyce Koo

Thu, 5 May 2005 09:41:43 -0400

Bending flex 90 deg

Re: Bending flex 90 deg

Steve Kelly

Thu, 12 May 2005 17:27:48 -0400

Re: Bending flex 90 deg

Werner Engelmaier

Thu, 12 May 2005 16:57:35 EDT

Bending flex 90 deg

Lon Weffers

Thu, 12 May 2005 13:12:30 +0200

Best plating for 10-15 GHz (Ku band?)

Re: Best plating for 10-15 GHz (Ku band?)

Brooks,Bill

Tue, 17 May 2005 12:00:19 -0700

Re: Best plating for 10-15 GHz (Ku band?)

Stadem, Richard

Tue, 17 May 2005 13:23:15 -0500

Re: Best plating for 10-15 GHz (Ku band?)

Ingemar Hernefjord (KC/EMW)

Tue, 17 May 2005 08:43:43 +0200

Best plating for 10-15 GHz (Ku band?)

Brooks,Bill

Mon, 16 May 2005 08:34:44 -0700

BGA Ball/Pad Size Ratio

MattyK

Wed, 11 May 2005 15:19:42 GMT

Jenny Prosmitsky

Wed, 11 May 2005 10:03:31 -0500

MattyK

Tue, 10 May 2005 20:13:42 GMT

David Greig

Tue, 10 May 2005 21:17:50 +0100

Eddie Rocha

Tue, 10 May 2005 12:55:59 -0700

David Greig

Tue, 10 May 2005 18:50:01 +0100

Alcorn, Brent

Tue, 10 May 2005 13:08:31 -0400

BGA Ball/Pad Size Ratio

John Guy

Tue, 10 May 2005 11:59:08 -0500

BGA Intermittent

Guy Ramsey

Tue, 24 May 2005 10:31:06 -0400

Laroe, Michael

Tue, 24 May 2005 10:19:39 -0400

Vladimir Igoshev

Tue, 24 May 2005 10:05:18 -0400

Dehoyos, Ramon

Tue, 24 May 2005 09:57:23 -0400

Werner Engelmaier

Tue, 24 May 2005 09:47:36 EDT

fraley , barrie

Tue, 24 May 2005 09:12:33 -0400

Black, Paul

Tue, 24 May 2005 09:11:25 -0400

Dehoyos, Ramon

Tue, 24 May 2005 09:10:06 -0400

fraley , barrie

Tue, 24 May 2005 09:06:44 -0400

Kerry McMullen

Tue, 24 May 2005 08:59:46 -0400

Kerry McMullen

Tue, 24 May 2005 08:54:46 -0400

Tempea, Ioan

Tue, 24 May 2005 08:34:16 -0400

Wenger, George M.

Tue, 24 May 2005 08:28:06 -0400

Kerry McMullen

Tue, 24 May 2005 08:17:08 -0400

Guy Ramsey

Tue, 24 May 2005 06:17:02 -0400

Leo Higgins

Mon, 23 May 2005 14:31:35 -0700

BGA Intermittents

Werner Engelmaier

Tue, 24 May 2005 09:16:48 EDT

Kerry McMullen

Tue, 24 May 2005 08:46:59 -0400

liusunny

Tue, 24 May 2005 14:25:48 +0800

Tue, 24 May 2005 00:44:22 EDT

Werner Engelmaier

Tue, 24 May 2005 00:27:39 EDT

Kerry McMullen

Mon, 23 May 2005 14:00:37 -0400

Paul Edwards

Mon, 23 May 2005 10:40:26 -0700

Kerry McMullen

Mon, 23 May 2005 13:31:18 -0400

Bev Christian

Mon, 23 May 2005 13:21:35 -0400

Macko, Joe @ IEC

Mon, 23 May 2005 10:19:17 -0700

Wenger, George M.

Mon, 23 May 2005 13:19:01 -0400

BGA Intermittents

Kerry McMullen

Mon, 23 May 2005 13:09:44 -0400

BGA Rework Station

John Guy

Fri, 27 May 2005 08:27:00 -0500

BGA test coupon

Charlie Pitarys

Thu, 19 May 2005 15:44:06 -0400

Joe Russeau

Thu, 19 May 2005 14:32:48 -0500

Douglas O. Pauls

Thu, 19 May 2005 13:06:21 -0500

Sara Gorcos

Thu, 19 May 2005 09:51:38 -0500

Dehoyos, Ramon

Thu, 19 May 2005 10:50:55 -0400

Stadem, Richard

Thu, 19 May 2005 09:35:17 -0500

BGA test coupon

Charlie Pitarys

Thu, 19 May 2005 10:29:01 -0400

board fab

Werner Engelmaier

Fri, 13 May 2005 14:46:37 EDT

Ofer Cohen

Fri, 13 May 2005 13:46:42 +0200

Stephen Roy Gregory

Thu, 12 May 2005 19:57:21 EDT

Werner Engelmaier

Thu, 12 May 2005 19:47:55 EDT

Franklin D Asbell

Thu, 12 May 2005 13:27:13 -0500

Franklin D Asbell

Thu, 12 May 2005 13:24:06 -0500

Scott B. Westheimer

Thu, 12 May 2005 14:15:25 -0400

Eddie Rocha

Thu, 12 May 2005 09:51:50 -0700

Jeffrey Bush

Thu, 12 May 2005 13:23:23 -0400

Eddie Rocha

Thu, 12 May 2005 09:47:51 -0700

Eddie Rocha

Thu, 12 May 2005 09:44:31 -0700

Deac Descoteaux

Thu, 12 May 2005 13:17:42 -0400

Franklin D Asbell

Thu, 12 May 2005 12:05:35 -0500

Deac Descoteaux

Thu, 12 May 2005 12:59:05 -0400

Happy Holden

Thu, 12 May 2005 12:58:04 -0400

John Parsons

Thu, 12 May 2005 09:45:17 -0700

James Hofer

Thu, 12 May 2005 09:23:07 -0700

Bubbly, flaking, soldermask...

Jeffrey Bush

Thu, 12 May 2005 12:29:52 -0400

board fab

Deac Descoteaux

Thu, 12 May 2005 12:27:45 -0400

Eddie Rocha

Tue, 17 May 2005 13:51:23 -0700

Bob Metcalf

Tue, 17 May 2005 14:22:54 -0700

Charles Caswell

Tue, 17 May 2005 13:26:39 -0500

Terry Kozlyk

Tue, 17 May 2005 11:23:17 -0600

Bubbly, flaking, soldermask...

Tue, 17 May 2005 13:21:18 EDT

Stephen Gregory

Tue, 17 May 2005 11:27:57 -0500

Calibration of SIR equipment

Bev Christian

Thu, 5 May 2005 06:57:16 -0400

R Sedlak

Thu, 5 May 2005 03:45:45 -0700

Stephen Gregory

Wed, 4 May 2005 17:41:24 -0500

Douglas O. Pauls

Wed, 4 May 2005 14:57:56 -0500

Bev Christian

Wed, 4 May 2005 12:16:55 -0400

Brian Ellis

Wed, 4 May 2005 18:45:32 +0300

Joe Russeau

Wed, 4 May 2005 10:44:36 -0500

Jason Gregory

Wed, 4 May 2005 10:42:59 -0500

R Sedlak

Wed, 4 May 2005 08:40:24 -0700

Joe Russeau

Wed, 4 May 2005 10:37:41 -0500

R Sedlak

Wed, 4 May 2005 08:31:30 -0700

Bev Christian

Wed, 4 May 2005 11:27:17 -0400

Richard Kraszewski

Wed, 4 May 2005 10:26:06 -0500

R Sedlak

Wed, 4 May 2005 08:22:22 -0700

Joe Russeau

Wed, 4 May 2005 09:55:25 -0500

Calibration of SIR equipment

Richard Kraszewski

Wed, 4 May 2005 09:51:45 -0500

Jason Koch

Wed, 4 May 2005 09:01:39 -0500

Calibration of SIR equipment

Graham Naisbitt

Wed, 4 May 2005 14:58:55 +0100

Bev Christian

Wed, 4 May 2005 08:51:40 -0400

Call for Papers Abstracts due June 3rd

Tom Newton

Fri, 27 May 2005 13:26:16 -0500

Call for Papers due by June 3

Keach Sasamori

Fri, 27 May 2005 09:00:58 -0500

Causes of voids in BGA's

Franklin D Asbell

Thu, 5 May 2005 08:13:44 -0500

Conformal Coating of Assembled Boards

Blomberg, Rainer (FL51)

Wed, 18 May 2005 14:27:36 -0700

Chris Ball

Wed, 18 May 2005 09:11:07 -0400

COOKE, ROBERT W. (JSC-NX) (WGI)

Tue, 17 May 2005 12:26:06 -0500

Douglas O. Pauls

Tue, 17 May 2005 07:59:07 -0500

David Douthit

Mon, 16 May 2005 17:48:13 -0700

Brooks,Bill

Mon, 16 May 2005 15:59:35 -0700

Barmuta, Mike

Mon, 16 May 2005 15:42:30 -0700

Mon, 16 May 2005 18:42:22 EDT

Stephen Gregory

Mon, 16 May 2005 17:40:21 -0500

- Bogert

Mon, 16 May 2005 18:34:34 -0400

Brooks,Bill

Mon, 16 May 2005 15:16:28 -0700

Conformal Coating of Assembled Boards

John Burke

Mon, 16 May 2005 15:00:32 -0700

Barbara Burcham

Mon, 16 May 2005 16:55:56 -0500

DI/DT Placement

Gumpert, Ben

Wed, 11 May 2005 16:26:17 -0400

Double sided assembly

Blair K. Hogg

Fri, 27 May 2005 08:08:10 -0700

Embedded Resistors

Johnson, Joseph SEA

Thu, 19 May 2005 14:21:32 -0400

End-of-life Hazardous Waste

Re: End-of-life Hazardous Waste

R Sedlak

Mon, 9 May 2005 14:59:09 -0700

End-of-life Hazardous Waste

David Tremmel

Mon, 9 May 2005 14:23:33 -0500

ENIG Board finish and RoHS

George Milad

Mon, 23 May 2005 07:23:03 EDT

Steve Kelly

Fri, 20 May 2005 10:42:50 -0400

George Milad

Fri, 20 May 2005 10:35:09 EDT

Russell Burdick

Fri, 20 May 2005 06:17:39 -0700

Burtt, Nigel

Fri, 20 May 2005 14:00:47 +0100

Jeffrey Bush

Fri, 20 May 2005 08:28:38 -0400

Burtt, Nigel

Fri, 20 May 2005 10:04:30 +0100

ENIG Board finish and RoHS

Jason Gregory

Thu, 19 May 2005 17:16:36 -0500

Bob Donaldson

Thu, 19 May 2005 16:57:41 -0500

Fabrication and Manufacture

Suganthi

Fri, 27 May 2005 14:42:37 +0530

Failed Tantalum Capacitors

Re: Failed Tantalum Capacitors

Paul Edwards

Wed, 4 May 2005 12:13:01 -0700

Failed Tantalum Capacitors

McGlaughlin, Jeffrey A

Wed, 4 May 2005 14:00:46 -0400

fishbone

Re: fishbone

Joyce Koo

Wed, 11 May 2005 16:36:46 -0400

Re: fishbone

Franklin D Asbell

Wed, 11 May 2005 15:14:00 -0500

fishbone

Joyce Koo

Wed, 11 May 2005 15:56:54 -0400

Flux

Dehoyos, Ramon

Fri, 6 May 2005 08:39:23 -0400

Brian Ellis

Fri, 6 May 2005 09:35:58 +0300

Steve Mikell

Fri, 6 May 2005 05:08:47 +0700

Flux Cored Solder Shelf Life

Phil Nutting

Thu, 5 May 2005 16:13:24 -0400

Flux

Dehoyos, Ramon

Thu, 5 May 2005 15:35:11 -0400

Mike Fenner

Fri, 6 May 2005 13:49:07 +0100

David D. Hillman

Fri, 6 May 2005 07:29:25 -0500

Brian Ellis

Fri, 6 May 2005 09:39:56 +0300

Flux Cored Solder Shelf Life

Blomberg, Rainer (FL51)

Thu, 5 May 2005 13:12:01 -0700

Gregg A. Owens

Thu, 5 May 2005 12:30:19 -0700

FR406 Tg 175 Degrees C - Lead Free Processing

Eddie Rocha

Thu, 12 May 2005 07:12:51 -0700

Gerard O'Brien

Wed, 11 May 2005 14:17:42 -0400

Lee Whiteman

Wed, 11 May 2005 13:20:58 -0400

FR406 Tg 175 Degrees C - Lead Free Processing

Jeffrey Bush

Wed, 11 May 2005 13:15:41 -0400

Kerry McMullen

Wed, 11 May 2005 13:02:46 -0400

FR5

Geoff Layhe of Lamar Group

Thu, 19 May 2005 16:51:42 +0100

Randy Bock Sr.

Thu, 19 May 2005 11:14:07 -0400

Jeffrey Bush

Thu, 19 May 2005 10:53:25 -0400

Baski Devre

Thu, 19 May 2005 15:51:46 +0300

Geoff Layhe of Lamar Group

Thu, 19 May 2005 13:04:55 +0100

Jeffrey Bush

Thu, 19 May 2005 07:52:41 -0400

Free electrical engineering technical support links

Randy Bock Sr.

Thu, 19 May 2005 07:14:02 -0400

FR5

Baski Devre

Thu, 19 May 2005 13:40:45 +0300

Stephen Hopkins

Tue, 24 May 2005 18:32:15 -0500

Fun with shipping NTC

Jeffrey Bush

Fri, 13 May 2005 12:30:39 -0400

Jason Gregory

Fri, 13 May 2005 11:13:46 -0500

Art Glass

Fri, 13 May 2005 10:56:50 -0500

Werner Engelmaier

Thu, 12 May 2005 20:02:16 EDT

Roland Jaquet

Thu, 12 May 2005 22:26:00 +0200

Phil Nutting

Thu, 12 May 2005 15:02:38 -0400

Franklin D Asbell

Thu, 12 May 2005 14:38:52 -0500

Douglas O. Pauls

Thu, 12 May 2005 13:56:27 -0500

Stephen Gregory

Thu, 12 May 2005 13:00:17 -0500

Graham Naisbitt

Thu, 12 May 2005 18:29:34 +0100

Roach, David

Thu, 12 May 2005 11:50:56 -0500

Franklin D Asbell

Thu, 12 May 2005 11:23:33 -0500

George Patrick

Thu, 12 May 2005 09:15:30 -0700

Franklin D Asbell

Thu, 12 May 2005 10:30:53 -0500

Jim Clark

Thu, 12 May 2005 11:26:56 -0400

R Sedlak

Thu, 12 May 2005 08:22:38 -0700

Phil Nutting

Thu, 12 May 2005 11:16:37 -0400

R Sedlak

Thu, 12 May 2005 08:11:55 -0700

Jim Clark

Thu, 12 May 2005 11:12:14 -0400

Franklin D Asbell

Thu, 12 May 2005 09:57:45 -0500

Jim Clark

Thu, 12 May 2005 10:46:05 -0400

Franklin D Asbell

Thu, 12 May 2005 08:44:01 -0500

Kelly Morris

Thu, 12 May 2005 08:19:17 -0500

Stadem, Richard

Thu, 12 May 2005 08:00:57 -0500

Douglas O. Pauls

Thu, 12 May 2005 07:42:59 -0500

Franklin D Asbell

Thu, 12 May 2005 07:40:37 -0500

Fun with shipping NTC

R Sedlak

Wed, 11 May 2005 16:04:05 -0700

Gerber files

John Parsons

Fri, 20 May 2005 11:29:37 -0700

Cheryl Johnson

Fri, 20 May 2005 12:27:01 -0600

Tempea, Ioan

Fri, 20 May 2005 14:16:38 -0400

David Tremmel

Fri, 20 May 2005 12:59:48 -0500

Get Ready for Lead Free-- in Barcelona

Cheryl Johnson

Fri, 20 May 2005 11:59:18 -0600

Gerber files

David Tremmel

Fri, 20 May 2005 12:46:36 -0500

Keach Sasamori

Fri, 13 May 2005 16:01:29 -0500

Gloves for handling Immersion Silver finished boards

Re: Gloves for handling Immersion Silver finished boards

Joe Russeau

Thu, 12 May 2005 10:08:05 -0500

Re: Gloves for handling Immersion Silver finished boards

Matthew Lamkin

Thu, 12 May 2005 11:46:02 +0100

Re: Gloves for handling Immersion Silver finished boards

Ofer Cohen

Thu, 12 May 2005 12:35:07 +0200

Re: Gloves for handling Immersion Silver finished boards

Jeffrey Bush

Wed, 11 May 2005 16:57:19 -0400

Re: Gloves for handling Immersion Silver finished boards

Lee parker

Wed, 11 May 2005 16:13:49 -0400

Re: Gloves for handling Immersion Silver finished boards

Jeffrey Bush

Wed, 11 May 2005 15:26:29 -0400

Re: Gloves for handling Immersion Silver finished boards

Joe Russeau

Wed, 11 May 2005 13:28:11 -0500

Re: Gloves for handling Immersion Silver finished boards

Franklin D Asbell

Wed, 11 May 2005 13:11:10 -0500

Gloves for handling Immersion Silver finished boards

Kaye Clayo

Wed, 11 May 2005 13:53:11 -0400

gold vs copper plating on pcb's - Black PAD???

Re: gold vs copper plating on pcb's - Black PAD???

Dehoyos, Ramon

Tue, 3 May 2005 10:48:21 -0400

Re: gold vs copper plating on pcb's - Black PAD???

McFaddin, Wade

Mon, 2 May 2005 08:31:59 -0500

Hal SnPb Tichness

Re: FW: Hal SnPb Tichness

Susan Mansilla

Sat, 21 May 2005 09:21:55 EDT

FW: Hal SnPb Tichness

Baski Devre

Sat, 21 May 2005 08:48:27 +0300

Hal SnPb Tichness

Baski Devre

Sat, 21 May 2005 08:37:23 +0300

HAL TIN THICKNESS

Re: HAL TIN THICKNESS

Eddie Rocha

Fri, 20 May 2005 09:10:00 -0700

Re: HAL TIN THICKNESS

Tempea, Ioan

Fri, 20 May 2005 10:41:13 -0400

Re: HAL TIN THICKNESS

Pete Lymn

Fri, 20 May 2005 15:23:59 +0100

HAL TIN THICKNESS

Baski Devre

Fri, 20 May 2005 17:33:07 +0300

HAL TIN THICKNESS

Baski Devre

Fri, 20 May 2005 17:22:22 +0300

Halogen Contamination

Re: Halogen Contamination

Joe Russeau

Fri, 13 May 2005 09:53:58 -0500

Re: Halogen Contamination

R Sedlak

Fri, 13 May 2005 07:40:23 -0700

Re: Halogen Contamination

Brian Ellis

Fri, 13 May 2005 15:56:39 +0200

Halogen Contamination

Bissonnette, Jean-Francois

Fri, 13 May 2005 08:20:26 -0400

Heavy copper wave soldering update...

Re: Heavy copper wave soldering update...

John Burke

Fri, 13 May 2005 11:47:23 -0700

Heavy copper wave soldering update...

Stephen Gregory

Fri, 13 May 2005 13:23:38 -0500

How would you quote this board?

Gary Crowell

Fri, 20 May 2005 11:03:58 -0600

I'm in Ohio

Stone, Tenison (MN10)

Sun, 15 May 2005 16:00:23 -0700

Im not getting any posts??

Mark Austin

Tue, 24 May 2005 08:19:00 +0100

IMC and Wetting

Re: IMC and Wetting

Vladimir Igoshev

Fri, 27 May 2005 11:07:05 -0400

Re: IMC and Wetting

Werner Engelmaier

Thu, 26 May 2005 19:18:35 -0400

Immersion Plating

Sencer Sofuoglu

Tue, 31 May 2005 08:36:36 -0500

George Milad

Sun, 29 May 2005 09:25:09 EDT

Lee parker

Fri, 27 May 2005 20:18:48 -0400

R Sedlak

Fri, 27 May 2005 16:06:34 -0700

Lee parker

Fri, 27 May 2005 17:59:13 -0400

Immersion Silver - Fab notes

R Sedlak

Fri, 27 May 2005 14:55:19 -0700

Wenger, George M.

Fri, 27 May 2005 18:29:38 -0400

Lee parker

Fri, 27 May 2005 17:10:25 -0400

R Sedlak

Fri, 27 May 2005 11:28:28 -0700

Whittaker, Dewey (AZ75)

Fri, 27 May 2005 10:04:09 -0700

Wenger, George M.

Fri, 27 May 2005 12:51:42 -0400

R Sedlak

Fri, 27 May 2005 09:36:49 -0700

Dave Seymour

Fri, 27 May 2005 11:38:30 -0400

Gerard O'Brien

Fri, 27 May 2005 11:16:09 -0400

Dave Seymour

Fri, 27 May 2005 10:02:30 -0400

IPA classifications

John Burke

Wed, 11 May 2005 09:17:16 -0700

Douglas O. Pauls

Wed, 11 May 2005 10:02:14 -0500

Matthew Lamkin

Wed, 11 May 2005 15:50:44 +0100

Graham Naisbitt

Wed, 11 May 2005 15:45:52 +0100

Douglas O. Pauls

Wed, 11 May 2005 07:20:09 -0500

IPC 9701 Failure Definition

R Sedlak

Tue, 10 May 2005 15:39:24 -0700

IPA classifications

Douglas O. Pauls

Tue, 10 May 2005 16:56:35 -0500

Werner Engelmaier

Fri, 6 May 2005 20:22:39 -0400

Bev Christian

Fri, 6 May 2005 08:53:57 -0400

Wenger, George M.

Fri, 6 May 2005 08:51:15 -0400

Bev Christian

Fri, 6 May 2005 08:05:26 -0400

IPC 9701 Failure Definition

Werner Engelmaier

Thu, 5 May 2005 23:50:04 -0400

Kirshenbaum Mordechai

Wed, 4 May 2005 16:22:06 -0500

IPC table of Organics acids

Re: IPC table of Organics acids

Douglas O. Pauls

Fri, 6 May 2005 13:03:00 -0500

IPC table of Organics acids

Richard Kraszewski

Fri, 6 May 2005 12:14:23 -0500

IPC Webcast on Future Flame Retardants in the Electronics Industry - Register Now

Alexandra Curtis

Mon, 2 May 2005 18:32:59 -0500

IPC-2581 (was: Re: [TN] ODB++ Files...)

Indrek Rebane

Tue, 24 May 2005 12:19:17 +0300

IPC-D-356 A/B

Re: IPC-D-356 A/B

Roland Jaquet

Wed, 25 May 2005 18:52:26 +0200

Re: IPC-D-356 A/B

Jeffrey Bush

Tue, 24 May 2005 13:37:33 -0400

Re: IPC-D-356 A/B

Franklin D Asbell

Tue, 24 May 2005 11:54:40 -0500

IPC-D-356 A/B

Roland Jaquet

Tue, 24 May 2005 18:11:55 +0200

IPCWorks 2005 Call for Papers

John Perry

Wed, 18 May 2005 15:45:22 -0500

Is it Friday yet?

John Burke

Tue, 10 May 2005 08:45:30 -0700

John Burke

Tue, 10 May 2005 08:37:25 -0700

Douglas O. Pauls

Tue, 10 May 2005 08:22:58 -0500

Ingemar Hernefjord (KC/EMW)

Tue, 10 May 2005 12:35:52 +0200

Brian Ellis

Tue, 10 May 2005 11:49:21 +0300

Matthew Lamkin

Tue, 10 May 2005 08:31:12 +0100

Chris Ball

Mon, 9 May 2005 16:34:54 -0400

John Burke

Mon, 9 May 2005 13:31:08 -0700

Blair K. Hogg

Mon, 9 May 2005 13:27:21 -0700

Blair K. Hogg

Mon, 9 May 2005 13:23:52 -0700

Phil Nutting

Mon, 9 May 2005 15:26:35 -0400

Phil Nutting

Mon, 9 May 2005 15:24:42 -0400

John Burke

Mon, 9 May 2005 12:23:22 -0700

Chris Ball

Mon, 9 May 2005 15:19:55 -0400

George Patrick

Mon, 9 May 2005 12:04:42 -0700

Brian Ellis

Mon, 9 May 2005 13:14:00 +0300

Ingemar Hernefjord (KC/EMW)

Mon, 9 May 2005 10:18:27 +0200

John Burke

Fri, 6 May 2005 14:02:32 -0700

George Patrick

Fri, 6 May 2005 12:09:12 -0700

Scott B. Westheimer

Fri, 6 May 2005 14:40:17 -0400

Dwight Mattix

Fri, 6 May 2005 10:45:01 -0700

Graham Naisbitt

Fri, 6 May 2005 15:16:16 +0100

Randy Bock Sr.

Fri, 6 May 2005 12:01:31 -0400

John Burke

Fri, 6 May 2005 09:00:31 -0700

Peter Swanson

Fri, 6 May 2005 15:22:15 +0100

Douglas O. Pauls

Fri, 6 May 2005 09:18:56 -0500

Graham Naisbitt

Fri, 6 May 2005 15:16:16 +0100

Stephen Gregory

Fri, 6 May 2005 09:02:27 -0500

David Greig

Fri, 6 May 2005 14:55:58 +0100

Garry Foskett

Fri, 6 May 2005 14:40:52 +0100

Douglas O. Pauls

Fri, 6 May 2005 08:34:10 -0500

Is it Friday yet? acronyms

R Sedlak

Fri, 6 May 2005 06:26:21 -0700

Is it Friday yet?

David Greig

Fri, 6 May 2005 14:21:07 +0100

John Burke

Tue, 10 May 2005 10:31:40 -0700

Bill Kasprzak

Tue, 10 May 2005 12:53:33 -0400

Phil Nutting

Tue, 10 May 2005 12:43:46 -0400

Roger Stoops

Tue, 10 May 2005 12:40:50 -0400

George Patrick

Tue, 10 May 2005 09:31:58 -0700

John Burke

Tue, 10 May 2005 08:59:55 -0700

Re: Is it Friday yet? NTC

Dave Dixon

Tue, 10 May 2005 10:53:57 -0500

Is it Friday yet? NTC

Mike Fenner

Fri, 6 May 2005 14:55:37 +0100

Is it Friday yet? NTC Pronuciation

Re: Is it Friday yet? NTC Pronuciation

Larry Russell

Wed, 11 May 2005 08:15:18 +0800

Re: Is it Friday yet? NTC Pronuciation

Phil Nutting

Tue, 10 May 2005 10:04:36 -0400

Re: Is it Friday yet? NTC Pronuciation

Bev Christian

Tue, 10 May 2005 09:33:26 -0400

J-std-033

Stadem, Richard

Thu, 5 May 2005 10:19:27 -0500

Land Pattern vs. Copper Weight fabrication clearances

Kevin Buchanan

Thu, 5 May 2005 10:11:17 -0400

Last Chance to Register for "The Future of Flame Retardants in the Electronics Industry" Webcast

Alexandra Curtis

Wed, 11 May 2005 11:00:39 -0500

Last Chance to Register for 610 & 001 Revision D Workshop in the UK

Alexandra Curtis

Mon, 9 May 2005 10:50:46 -0500

Last Chance to Submit Abstracts for Flex & Chips and RFID Conference

Alexandra Curtis

Thu, 5 May 2005 13:22:26 -0500

Lead-Free solder for wave solder machine

Re: Lead-Free solder for wave solder machine

John Maxwell

Wed, 11 May 2005 08:09:44 -0700

Re: Lead-Free solder for wave solder machine

Phil Nutting

Tue, 10 May 2005 15:21:03 -0400

Re: Lead-Free solder for wave solder machine

John Maxwell

Tue, 10 May 2005 10:41:09 -0700

Lead-Free solder for wave solder machine

Kaye Clayo

Tue, 10 May 2005 13:19:59 -0400

LPI adhesion on ENIG vs. copper...

Eddie Rocha

Thu, 12 May 2005 06:48:08 -0700

Franklin D Asbell

Wed, 11 May 2005 13:22:24 -0500

Jeffrey Bush

Wed, 11 May 2005 11:18:00 -0400

John Parsons

Wed, 11 May 2005 08:03:40 -0700

Ryan Grant

Wed, 11 May 2005 08:39:33 -0600

Scott B. Westheimer

Wed, 11 May 2005 10:20:36 -0400

Franklin D Asbell

Wed, 11 May 2005 08:53:08 -0500

LPI adhesion on ENIG vs. copper...

Frank Kimmey

Wed, 11 May 2005 06:50:21 -0700

Stephen Gregory

Wed, 11 May 2005 08:32:33 -0500

Make Your Travel Plans NOW for the Lead Free Conference in Barcelona

Alexandra Curtis

Fri, 6 May 2005 10:30:41 -0500

Manufacturing Process Engineer Position in Austin, Texas

Cheryl Tulkoff

Wed, 11 May 2005 09:31:54 -0500

Markings

Re: Markings

TDK

Tue, 17 May 2005 06:48:58 -0600

Re: Markings

Dehoyos, Ramon

Tue, 17 May 2005 08:29:20 -0400

Re: Markings

Matthew Lamkin

Tue, 17 May 2005 11:09:20 +0100

Markings

Green, Mike

Mon, 16 May 2005 17:19:44 -0700

micro cracks in leadfree wavesolder

Re: micro cracks in leadfree wavesolder

Whittaker, Dewey (AZ75)

Tue, 31 May 2005 08:48:51 -0700

Re: micro cracks in leadfree wavesolder

Stephen Roy Gregory

Tue, 31 May 2005 11:41:58 EDT

Re: micro cracks in leadfree wavesolder

Gabriela Bogdan

Sat, 28 May 2005 07:01:51 +0200

micro cracks in leadfree wavesolder

No Name

Fri, 27 May 2005 16:18:06 -0500

Mil Spec NTC

Stephen Ayotte

Wed, 25 May 2005 14:20:01 -0400

minimum nickel thickness`

Glenn Pelkey

Wed, 4 May 2005 12:09:01 -0700

Macconnell, Richard (ES)

Wed, 4 May 2005 11:15:27 -0700

Judy Brown

Wed, 4 May 2005 09:35:09 -0700

Crepeau, Phil (Space Technology)

Wed, 4 May 2005 07:32:23 -0700

Ingemar Hernefjord (KC/EMW)

Wed, 4 May 2005 10:34:09 +0200

Brian Ellis

Wed, 4 May 2005 10:07:17 +0300

R Sedlak

Tue, 3 May 2005 17:39:16 -0700

minimum nickel thickness`

Glenn Pelkey

Tue, 3 May 2005 14:36:15 -0700

Crepeau, Phil (Space Technology)

Tue, 3 May 2005 13:28:16 -0700

Mixed bed resin for Ionic contamination tester

Re: Mixed bed resin for Ionic contamination tester

Brian Ellis

Tue, 3 May 2005 13:46:01 +0300

Re: Mixed bed resin for Ionic contamination tester

Edwin Louis

Mon, 2 May 2005 16:13:49 -0400

Mixed bed resin for Ionic contamination tester

Charlie Pitarys

Mon, 2 May 2005 12:56:30 -0400

Moisture sensitive components

Gabriela Bogdan

Wed, 18 May 2005 21:46:57 +0200

mouse bites causing me problems

Re: mouse bites causing me problems

Ted Tontis

Wed, 11 May 2005 15:35:10 -0500

Re: mouse bites causing me problems

Chris Ball

Wed, 11 May 2005 16:13:28 -0400

Re: mouse bites causing me problems

Franklin D Asbell

Wed, 11 May 2005 15:10:55 -0500

mouse bites causing me problems

Ted Tontis

Wed, 11 May 2005 14:57:45 -0500

MSL?

Eddie Rocha

Thu, 12 May 2005 06:57:24 -0700

Glenn Pelkey

Wed, 11 May 2005 08:08:24 -0700

Roger Stoops

Wed, 11 May 2005 10:12:44 -0400

Bev Christian

Wed, 11 May 2005 09:59:13 -0400

Roger Stoops

Wed, 11 May 2005 09:51:30 -0400

MSL?

Eddie Rocha

Tue, 10 May 2005 15:22:31 -0700

NDT Question

Werner Engelmaier

Fri, 13 May 2005 17:53:51 EDT

Joyce Koo

Fri, 13 May 2005 17:09:54 -0400

Bev Christian

Fri, 13 May 2005 15:17:15 -0400

Nickel separation from Silver layer on resistor

Werner Engelmaier

Fri, 13 May 2005 15:13:47 EDT

NDT Question

Bev Christian

Fri, 13 May 2005 15:04:45 -0400

Ryan Grant

Thu, 19 May 2005 09:45:02 -0600

NTC - Contacts

Re: NTC - Contacts

Stephen Gregory

Mon, 9 May 2005 12:45:35 -0500

NTC - Contacts

Stephen Ayotte

Mon, 9 May 2005 13:38:31 -0400

NTC Flux Cored Solder Shelf Life

Brian Ellis

Fri, 6 May 2005 19:04:12 +0300

John Burke

Fri, 6 May 2005 09:02:36 -0700

Randy Bock Sr.

Fri, 6 May 2005 12:01:31 -0400

Whittaker, Dewey (AZ75)

Fri, 6 May 2005 07:19:15 -0700

Jason Gregory

Fri, 6 May 2005 09:02:32 -0500

Mike Fenner

Fri, 6 May 2005 15:03:29 +0100

Bloomquist, Ken

Fri, 6 May 2005 06:56:21 -0700

Jason Gregory

Fri, 6 May 2005 08:51:21 -0500

Bloomquist, Ken

Fri, 6 May 2005 06:45:28 -0700

NTC Friday Factoids

R Sedlak

Fri, 6 May 2005 06:18:52 -0700

NTC Friday post...

Phil Nutting

Mon, 2 May 2005 09:17:44 -0400

Dehoyos, Ramon

Mon, 2 May 2005 09:11:01 -0400

Randy Bock Sr.

Mon, 2 May 2005 06:10:04 -0400

Re: NTC Friday reflecxion

Ingemar Hernefjord (KC/EMW)

Mon, 2 May 2005 09:24:33 +0200

NTC Friday reflecxion

Brian Ellis

Fri, 20 May 2005 17:53:27 +0300

Re: NTC Friday reflecxion

Chris Ball

Fri, 20 May 2005 10:38:55 -0400

NTC Friday reflecxion

Ingemar Hernefjord (KC/EMW)

Fri, 20 May 2005 16:12:05 +0200

NTC Memorial Day

Re: NTC Memorial Day

Lee Whiteman

Fri, 27 May 2005 16:18:25 -0400

Re: NTC Memorial Day

Kathy Kuhlow

Fri, 27 May 2005 14:05:07 -0500

Re: NTC Memorial Day

Stephen Roy Gregory

Fri, 27 May 2005 14:59:26 EDT

NTC Memorial Day

Stephen Roy Gregory

Fri, 27 May 2005 14:34:50 EDT

NTC: Hot debate

Gregg Owens

Fri, 20 May 2005 12:41:39 -0700

Charles Caswell

Fri, 20 May 2005 12:43:42 -0500

George Patrick

Fri, 20 May 2005 10:27:35 -0700

Lee Whiteman

Fri, 20 May 2005 13:08:08 -0400

Chris Ball

Fri, 20 May 2005 12:59:02 -0400

Mike Fenner

Fri, 20 May 2005 17:16:04 +0100

Chris Allen

Fri, 20 May 2005 17:14:26 +0100

George Patrick

Fri, 20 May 2005 08:25:01 -0700

Blomberg, Rainer (FL51)

Fri, 20 May 2005 08:13:50 -0700

Matthew Lamkin

Fri, 20 May 2005 16:17:53 +0100

Ryan Grant

Fri, 20 May 2005 09:17:16 -0600

George Patrick

Fri, 20 May 2005 08:15:38 -0700

Johnson, Joseph SEA

Fri, 20 May 2005 11:12:06 -0400

Charles Caswell

Fri, 20 May 2005 10:12:29 -0500

COOKE, ROBERT W. (JSC-NX) (WGI)

Fri, 20 May 2005 10:05:59 -0500

Kevin Jaworenko

Fri, 20 May 2005 10:01:00 -0500

Johnson, Joseph SEA

Fri, 20 May 2005 10:55:22 -0400

Brian Ellis

Fri, 20 May 2005 17:52:20 +0300

NTC: Hot debate

Kathy Kuhlow

Fri, 20 May 2005 09:34:28 -0500

ODB++ Files...

Ahne Oosterhof

Mon, 23 May 2005 13:11:58 -0700

Carroll, Jon

Wed, 18 May 2005 09:46:57 -0400

Indrek Rebane

Wed, 18 May 2005 16:40:10 +0300

Parial Swati/NAN/ATS/IN is out of the office.

Dave Seymour

Wed, 18 May 2005 09:29:43 -0400

ODB++ Files...

Stephen Gregory

Wed, 18 May 2005 08:14:27 -0500

Parial Swati

Fri, 6 May 2005 01:03:31 +0530

PCB Commutator

Roger M Unwin

Fri, 27 May 2005 20:50:48 +0100

Whittaker, Dewey (AZ75)

Fri, 27 May 2005 12:23:25 -0700

Crepeau, Phil (Space Technology)

Fri, 27 May 2005 12:12:51 -0700

Roger M Unwin

Fri, 27 May 2005 18:20:07 +0100

Anil Kher

Fri, 27 May 2005 10:29:47 +0530

Jeffrey Bush

Mon, 23 May 2005 15:50:11 -0400

Chris Ball

Mon, 23 May 2005 15:24:49 -0400

PCB Commutator

Roger M Unwin

Mon, 23 May 2005 20:05:48 +0100

PCB design

George Patrick

Fri, 27 May 2005 11:33:11 -0700

Jim Clark

Fri, 27 May 2005 14:30:36 -0400

Jeffrey Bush

Fri, 27 May 2005 13:45:44 -0400

John Burke

Fri, 27 May 2005 09:43:36 -0700

Whittaker, Dewey (AZ75)

Fri, 27 May 2005 09:34:36 -0700

Handley, William

Fri, 27 May 2005 09:16:40 -0700

Frank Kimmey

Fri, 27 May 2005 09:25:33 -0700

Deac Descoteaux

Fri, 27 May 2005 12:09:38 -0400

Plating problem at the "Knee"

George Patrick

Fri, 27 May 2005 09:06:40 -0700

PCB design

Deac Descoteaux

Fri, 27 May 2005 11:59:31 -0400

PCB soldermask spec

Re: PCB soldermask spec

Dennis Fritz

Wed, 11 May 2005 10:56:04 EDT

Re: PCB soldermask spec

Jeffrey Bush

Wed, 11 May 2005 08:02:24 -0400

Re: PCB soldermask spec

Mark Hargreaves

Tue, 10 May 2005 15:16:51 -0400

PCB soldermask spec

Matthew Park

Tue, 10 May 2005 13:27:08 -0500

pcb storage

Bob Arciolla

Fri, 27 May 2005 11:54:44 -0400

Per-Erik Tegehall

Re: Per-Erik Tegehall

David Douthit

Thu, 26 May 2005 22:31:41 -0700

Per-Erik Tegehall

Douglas O. Pauls

Thu, 26 May 2005 11:53:48 -0500

planarity

Baski Devre

Wed, 25 May 2005 18:04:24 +0300

Re: Plating problem at the "Knee"

Steve Mikell

Sat, 21 May 2005 13:34:46 +0700

Re: Plating problem at the "Knee"

Guy Ramsey

Fri, 20 May 2005 16:31:10 -0400

Re: Plating problem at the "Knee"

Ingemar Hernefjord (KC/EMW)

Fri, 20 May 2005 16:46:20 +0200

Plating problem at the "Knee"

Bill Kasprzak

Fri, 20 May 2005 10:25:00 -0400

Possible Lead

Ingemar Hernefjord (KC/EMW)

Mon, 16 May 2005 16:18:57 +0200

Tempea, Ioan

Mon, 16 May 2005 09:04:07 -0400

Ingemar Hernefjord (KC/EMW)

Mon, 16 May 2005 07:58:36 +0200

Joyce Koo

Fri, 13 May 2005 17:11:21 -0400

John Burke

Fri, 13 May 2005 13:03:54 -0700

John Burke

Fri, 13 May 2005 13:03:21 -0700

Marvin Gaines

Fri, 13 May 2005 13:01:51 -0700

John Burke

Fri, 13 May 2005 12:59:20 -0700

David Douthit

Fri, 13 May 2005 12:38:43 -0700

Deac Descoteaux

Fri, 13 May 2005 15:30:05 -0400

Deac Descoteaux

Fri, 13 May 2005 15:29:29 -0400

FW: Possible Lead

Charlie McMahon

Fri, 13 May 2005 15:27:54 -0400

PWB Consultant

Re: PWB Consultant

Isaacson, Lynn

Tue, 24 May 2005 11:00:17 -0700

PWB Consultant

Long, Thomas - Avionics

Tue, 24 May 2005 08:24:02 -0400

R & R evaluation

Wed, 25 May 2005 16:58:12 EDT

Sherif Refaat

Wed, 25 May 2005 09:08:36 -0400

Douglas O. Pauls

Wed, 25 May 2005 07:05:41 -0500

Reuven Rokah/ECI Telecom is out of the office.

Graham Naisbitt

Wed, 25 May 2005 00:16:05 +0100

R & R evaluation

Sherif Refaat

Tue, 24 May 2005 17:41:27 -0400

RECALL!!! W: I'm in Ohio

Stone, Tenison (MN10)

Sun, 15 May 2005 16:03:18 -0700

Recertification

Re: Recertification

Lance Mayes

Wed, 18 May 2005 08:57:57 -0600

Re: Recertification

Jack Crawford

Tue, 17 May 2005 17:19:12 -0500

Recertification

Lance Mayes

Tue, 17 May 2005 17:08:07 -0400

Christi Poulsen

Fri, 6 May 2005 21:49:04 -0500

Christi Poulsen

Fri, 6 May 2005 21:42:33 -0500

Reuven ROKAH

Tue, 10 May 2005 18:30:26 +0300

RMII ETHERNET PHY Controller

Balasubramanian Krishnan

Thu, 12 May 2005 11:08:22 +0530

ROHS Pronuciation NTC

mohammed israr

Sun, 15 May 2005 23:01:11 -0700

R Sedlak

Wed, 11 May 2005 03:52:10 -0700

Hughes, Chris

Wed, 11 May 2005 02:56:11 -0400

Blair K. Hogg

Tue, 10 May 2005 13:56:42 -0700

Jason Gregory

Tue, 10 May 2005 15:31:30 -0500

Judy Brown

Tue, 10 May 2005 12:50:58 -0700

R Sedlak

Tue, 10 May 2005 11:58:34 -0700

Jeffrey Bush

Tue, 10 May 2005 12:25:35 -0400

Phil Nutting

Tue, 10 May 2005 12:41:22 -0400

Hughes, Chris

Tue, 10 May 2005 12:14:22 -0400

Baski Devre

Tue, 10 May 2005 19:12:46 +0300

Richard Kraszewski

Tue, 10 May 2005 11:08:29 -0500

Franklin D Asbell

Tue, 10 May 2005 11:02:14 -0500

SAMCO Swing Beam Die Cutting Machines

Phil Zarrow

Tue, 10 May 2005 11:59:05 EDT

ROHS Pronuciation NTC

R Sedlak

Tue, 10 May 2005 08:53:58 -0700

RoHS/WEEE workshop

John Burke

Thu, 26 May 2005 15:09:58 -0700

Tuan Le

Fri, 20 May 2005 17:46:24 -0700

Semi q about power zeners

Re: Semi q about power zeners

Ingemar Hernefjord (KC/EMW)

Wed, 25 May 2005 09:14:51 +0200

Re: Semi q about power zeners

Joyce Koo

Fri, 20 May 2005 09:53:25 -0400

Semi q about power zeners

Ingemar Hernefjord (KC/EMW)

Fri, 20 May 2005 15:37:41 +0200

SIGNOFF TECHNET

Reid, Lorraine

Mon, 16 May 2005 12:08:27 +0100

SIR calibration

Graham Naisbitt

Thu, 5 May 2005 17:03:58 +0100

SMOBC question...

Roger Stoops

Thu, 19 May 2005 10:27:55 -0400

Craig Cullum

Thu, 19 May 2005 08:49:42 -0500

Blair K. Hogg

Thu, 19 May 2005 05:13:55 -0700

Jeffrey Bush

Thu, 19 May 2005 07:47:10 -0400

Wolfgang E. Erat

Wed, 18 May 2005 19:58:54 -0400

Ryan Grant

Wed, 18 May 2005 17:00:51 -0600

SMOBC question...

Frederick Miller

Wed, 18 May 2005 14:51:04 -0400

James Hofer

Wed, 18 May 2005 11:45:53 -0700

Allen T. Maddox

Wed, 18 May 2005 11:46:34 -0700

Jack C. Olson

Wed, 18 May 2005 12:36:56 -0500

Chris Ball

Wed, 18 May 2005 13:35:40 -0400

Charlie McMahon

Wed, 18 May 2005 12:54:19 -0400

Stephen Gregory

Wed, 18 May 2005 11:12:44 -0500

Wolfgang E. Erat

Wed, 18 May 2005 12:03:01 -0400

Jack C. Olson

Wed, 18 May 2005 10:34:32 -0500

Eddie Rocha

Tue, 17 May 2005 14:28:55 -0700

Stephen Gregory

Tue, 17 May 2005 08:32:08 -0500

R Sedlak

Tue, 17 May 2005 06:14:42 -0700

Stephen Gregory

Tue, 17 May 2005 08:03:12 -0500

Jeffrey Bush

Tue, 17 May 2005 07:57:41 -0400

R Sedlak

Mon, 16 May 2005 20:05:32 -0700

SMOBC question...

Stephen Gregory

Mon, 16 May 2005 18:50:01 -0500

Solder Joint Anomaly

Gabriela Bogdan

Wed, 25 May 2005 17:58:47 +0200

Ingemar Hernefjord (KC/EMW)

Wed, 25 May 2005 08:54:04 +0200

Leo Higgins

Tue, 24 May 2005 19:51:39 -0700

Al Onderick

Tue, 24 May 2005 16:48:32 -0500

Victor G. Hernandez

Tue, 24 May 2005 15:51:30 -0500

Werner Engelmaier

Tue, 24 May 2005 16:40:39 EDT

Al Onderick

Tue, 24 May 2005 15:30:32 -0500

Al Onderick

Tue, 24 May 2005 15:29:31 -0500

Tue, 24 May 2005 16:28:08 -0400

Stadem, Richard

Tue, 24 May 2005 15:19:34 -0500

Solderablity of ElectrolessNickel

Werner Engelmaier

Tue, 24 May 2005 16:08:21 EDT

Solder Joint Anomaly

Al Onderick

Tue, 24 May 2005 14:44:03 -0500

Solder mask

Janoch Jiří, Ing.

Fri, 27 May 2005 07:12:59 +0200

Solder Spheres

David Tremmel

Fri, 13 May 2005 12:14:47 -0500

Re: Solder Spheres

Richard Kraszewski

Fri, 13 May 2005 07:31:48 -0500

Solder Spheres

David Tremmel

Thu, 12 May 2005 16:44:32 -0500

Solder Terminals

Re: Solder Terminals

Whittaker, Dewey (AZ75)

Mon, 23 May 2005 14:50:42 -0700

Re: Solder Terminals

Green, Mike

Mon, 23 May 2005 13:56:55 -0700

George Milad

Sun, 29 May 2005 08:52:05 EDT

Werner Engelmaier

Fri, 27 May 2005 21:14:15 -0400

Vladimir Igoshev

Fri, 27 May 2005 11:35:40 -0400

Stadem, Richard

Fri, 27 May 2005 10:14:38 -0500

Gerard O'Brien

Fri, 27 May 2005 11:03:24 -0400

Brian Ellis

Fri, 27 May 2005 17:37:13 +0300

Vladimir Igoshev

Fri, 27 May 2005 10:17:03 -0400

Solderablity of ElectrolessNickel

COOKE, ROBERT W. (JSC-NX) (WGI)

Fri, 27 May 2005 09:13:00 -0500

Richard Kraszewski

Fri, 27 May 2005 08:11:26 -0500

Staking Adhesive

Re: Staking Adhesive

Crepeau, Phil (Space Technology)

Tue, 31 May 2005 17:11:29 -0700

Staking Adhesive

Mary Jane Chism

Tue, 31 May 2005 15:40:04 -0500

Standard Core thickeness

Suganthi

Mon, 2 May 2005 12:13:42 +0530

Static and break over voltage spacing standards?

Re: FW: Static and break over voltage spacing standards?

Gene Felder

Mon, 9 May 2005 10:20:39 -0700

Re: FW: Static and break over voltage spacing standards?

Van Beveren Richard (RBAU/MFE4)

Mon, 9 May 2005 15:46:39 +1000

Re: FW: Static and break over voltage spacing standards?

Mike Sewell

Sat, 7 May 2005 06:29:35 -0500

Re: FW: Static and break over voltage spacing standards?

Blair K. Hogg

Fri, 6 May 2005 12:46:57 -0700

Re: FW: Static and break over voltage spacing standards?

Phil Nutting

Fri, 6 May 2005 15:23:22 -0400

Re: FW: Static and break over voltage spacing standards?

Dehoyos, Ramon

Fri, 6 May 2005 15:16:14 -0400

FW: Static and break over voltage spacing standards?

Brooks,Bill

Fri, 6 May 2005 08:07:22 -0700

Stencil Accuracy

Re: Stencil Accuracy

Ahne Oosterhof

Tue, 3 May 2005 11:31:47 -0700

storage conditions of PCB

Baski Devre

Wed, 25 May 2005 13:35:26 +0300

Dehoyos, Ramon

Fri, 20 May 2005 13:20:32 -0400

Richard Kraszewski

Fri, 20 May 2005 11:13:23 -0500

Roach, David

Fri, 20 May 2005 11:01:50 -0500

Jeffrey Bush

Fri, 20 May 2005 11:32:01 -0400

Glenn Pelkey

Fri, 20 May 2005 07:49:57 -0700

Ryan Grant

Fri, 20 May 2005 08:42:33 -0600

FW: storage conditions of PCB

Richard Kraszewski

Fri, 20 May 2005 09:09:13 -0500

Baski Devre

Fri, 20 May 2005 16:57:10 +0300

Suggested failure analysis technique?

Dehoyos, Ramon

Tue, 10 May 2005 10:17:10 -0400

Bev Christian

Tue, 10 May 2005 09:14:56 -0400

liusunny

Tue, 10 May 2005 09:15:20 +0800

Joyce Koo

Mon, 9 May 2005 17:27:52 -0400

John Burke

Mon, 9 May 2005 14:23:24 -0700

Cheryl Tulkoff

Mon, 9 May 2005 16:10:52 -0500

Cheryl Tulkoff

Mon, 9 May 2005 16:08:49 -0500

Bev Christian

Mon, 9 May 2005 16:57:06 -0400

Vladimir Igoshev

Mon, 9 May 2005 16:56:33 -0400

Suggested failure analysis technique?

Cheryl Tulkoff

Mon, 9 May 2005 15:45:38 -0500

supply audit checklist

Re: supply audit checklist

Joyce Koo

Wed, 4 May 2005 13:51:59 -0400

Re: supply audit checklist

Franklin D Asbell

Wed, 4 May 2005 11:46:41 -0500

Re: supply audit checklist

Anslow, Phillip

Wed, 4 May 2005 17:33:35 +0100

supply audit checklist

Joyce Koo

Wed, 4 May 2005 12:27:02 -0400

Tangency Definition

Re: Tangency Definition

Jeffrey Bush

Fri, 27 May 2005 10:59:44 -0400

Tangency Definition

Susan Mansilla

Fri, 27 May 2005 10:02:05 EDT

Tg measurement

Re: Tg measurement

Brummer Chuck

Wed, 11 May 2005 08:24:01 -0700

Re: Tg measurement

Jeffrey Bush

Wed, 11 May 2005 08:15:57 -0400

Tg measurement

Murulidhara

Wed, 11 May 2005 12:49:06 +0530

Thick PCB Fab Construction Question

Re: Thick PCB Fab Construction Question

James Hofer

Thu, 12 May 2005 09:06:30 -0700

Re: Thick PCB Fab Construction Question

Eddie Rocha

Thu, 12 May 2005 07:33:56 -0700

Re: Thick PCB Fab Construction Question

Jeffrey Bush

Thu, 12 May 2005 08:19:35 -0400

Thick PCB Fab Construction Question

Richard

Wed, 11 May 2005 23:29:40 -0700

THICKNESS FOR 5 A

Re: THICKNESS FOR 5 A

Clover Baker

Wed, 11 May 2005 10:51:13 -0500

Re: THICKNESS FOR 5 A

Clover Baker

Wed, 11 May 2005 07:12:21 -0500

THICKNESS FOR 5 A

Baski Devre

Wed, 11 May 2005 14:46:44 +0300

Through hole drill accuracy

Terry Kozlyk

Tue, 10 May 2005 08:01:57 -0600

TDK

Fri, 6 May 2005 05:51:44 -0600

Roger Stoops

Thu, 5 May 2005 13:35:58 -0400

Jeffrey Bush

Thu, 5 May 2005 13:12:56 -0400

George Carroll

Thu, 5 May 2005 11:11:17 -0400

Roger Stoops

Thu, 5 May 2005 10:33:12 -0400

Jeffrey Bush

Thu, 5 May 2005 10:08:34 -0400

Roger Stoops

Thu, 5 May 2005 09:29:53 -0400

Jeffrey Bush

Thu, 5 May 2005 07:37:33 -0400

Lee parker

Wed, 4 May 2005 23:15:44 -0400

Through hole drill accuracy

Stephen Gregory

Wed, 4 May 2005 17:52:29 -0500

Scott Lefebvre

Wed, 4 May 2005 15:10:02 -0700

Tombstone

Re: Tombstone

Le Ai Quoc

Wed, 11 May 2005 11:44:38 +0700

Re: Tombstone

TDK

Tue, 10 May 2005 19:26:44 -0600

Re: Tombstone

Le Thanh Tung

Wed, 11 May 2005 07:38:47 +0700

Tombstone

Suganthi

Tue, 10 May 2005 13:21:59 +0530

Torque

Ofer Cohen

Mon, 9 May 2005 14:51:19 +0200

Victor G. Hernandez

Mon, 9 May 2005 06:50:51 -0500

Martin Butcher

Fri, 6 May 2005 14:46:34 -0700

Phil Nutting

Fri, 6 May 2005 14:49:10 -0400

Dehoyos, Ramon

Fri, 6 May 2005 14:59:09 -0400

Ross K. Wilcoxon

Fri, 6 May 2005 13:01:08 -0500

Phil Nutting

Fri, 6 May 2005 11:49:09 -0400

Dehoyos, Ramon

Fri, 6 May 2005 12:15:51 -0400

Roach, David

Fri, 6 May 2005 10:52:16 -0500

Graham Collins

Fri, 6 May 2005 11:50:53 -0400

Phil Nutting

Fri, 6 May 2005 11:34:44 -0400

Roach, David

Fri, 6 May 2005 10:30:23 -0500

Bloomquist, Ken

Fri, 6 May 2005 08:22:54 -0700

Victor G. Hernandez

Fri, 6 May 2005 10:10:28 -0500

James TerVeen

Fri, 6 May 2005 11:08:23 -0400

Blomberg, Rainer (FL51)

Fri, 6 May 2005 07:59:15 -0700

Dehoyos, Ramon

Fri, 6 May 2005 10:57:55 -0400

Roach, David

Fri, 6 May 2005 09:40:37 -0500

Bloomquist, Ken

Fri, 6 May 2005 07:25:17 -0700

Dehoyos, Ramon

Fri, 6 May 2005 10:22:45 -0400

Phil Nutting

Fri, 6 May 2005 08:19:23 -0400

Blomberg, Rainer (FL51)

Fri, 6 May 2005 05:32:55 -0700

Phil Nutting

Fri, 6 May 2005 08:04:09 -0400

Torque

Victor G. Hernandez

Thu, 5 May 2005 16:25:00 -0500

Torque Drivers

Martin Butcher

Mon, 2 May 2005 11:56:42 -0700

Martin Butcher

Mon, 2 May 2005 11:41:31 -0700

Schleman, Joe A.

Mon, 2 May 2005 14:45:22 -0400

Bob Arciolla

Mon, 2 May 2005 14:39:58 -0400

Uralane / Arathane 5750 Conformal Coating...

Bloomquist, Ken

Mon, 2 May 2005 11:23:41 -0700

Torque Drivers

Martin Butcher

Mon, 2 May 2005 10:48:20 -0700

Re: Uralane / Arathane 5750 Conformal Coating...

Blomberg, Rainer (FL51)

Mon, 2 May 2005 13:04:47 -0700

Re: Uralane / Arathane 5750 Conformal Coating...

John Burke

Mon, 2 May 2005 12:58:23 -0700

Re: Uralane / Arathane 5750 Conformal Coating...

Mike Sewell

Mon, 2 May 2005 14:27:23 -0500

Uralane / Arathane 5750 Conformal Coating...

Stephen Gregory

Mon, 2 May 2005 13:55:23 -0500

USAF Airworthiness Advisory concerning Lead-Free solders...

Stephen Gregory

Thu, 26 May 2005 12:44:30 -0500

Via contamination

Al Onderick

Wed, 4 May 2005 09:06:07 -0500

Mark Austin

Wed, 4 May 2005 09:34:00 +0100

Colin McVean

Wed, 4 May 2005 07:57:16 +0100

Pete menuez

Tue, 3 May 2005 16:36:25 -0400

Colin McVean

Tue, 3 May 2005 17:14:09 +0100

Susan Mansilla

Tue, 3 May 2005 12:12:22 EDT

Via contamination...another instance

Colin McVean

Tue, 3 May 2005 17:01:35 +0100

Via contamination

Al Onderick

Tue, 3 May 2005 10:40:29 -0500

Re: Via contamination...another instance

Stephen Gregory

Wed, 4 May 2005 11:46:40 -0500

Via in (SMT) pad

Re: Via in (SMT) pad

Karl Sauter

Wed, 18 May 2005 09:38:33 -0700

Re: Via in (SMT) pad

Jeffrey Bush

Wed, 18 May 2005 11:20:46 -0400

Re: Via in (SMT) pad

Dave Seymour

Wed, 18 May 2005 11:09:44 -0400

Via in (SMT) pad

Allen T. Maddox

Wed, 18 May 2005 07:42:30 -0700

WANTED: Board design review

FW: WANTED: Board design review

Simms, Michael

Fri, 13 May 2005 15:30:06 -0500

Re: WANTED: Board design review

James Hofer

Fri, 13 May 2005 10:37:17 -0700

Re: WANTED: Board design review

Jeffrey Bush

Fri, 13 May 2005 13:13:52 -0400

WANTED: Board design review

Simms, Michael

Fri, 13 May 2005 11:49:57 -0500

Washing OSP boards

Barmuta, Mike

Thu, 12 May 2005 07:12:47 -0700

Bev Christian

Thu, 12 May 2005 07:10:40 -0400

Ted Kong

Wed, 11 May 2005 17:19:40 -0700

Douglas O. Pauls

Wed, 11 May 2005 13:25:42 -0500

Bev Christian

Wed, 11 May 2005 13:04:05 -0400

Barmuta, Mike

Wed, 11 May 2005 10:03:45 -0700

Weldable solder terminals

Morse, Carrie

Wed, 11 May 2005 12:59:09 -0400

Washing OSP boards

Bev Christian

Wed, 11 May 2005 12:50:51 -0400

Re: Weldable solder terminals

Kerry McMullen

Tue, 10 May 2005 08:35:32 -0400

Re: Weldable solder terminals

Stephen Gregory

Tue, 10 May 2005 07:23:00 -0500

Re: Weldable solder terminals

David Fish

Tue, 10 May 2005 07:51:30 -0400

Weldable solder terminals

Stephen Gregory

Fri, 6 May 2005 10:50:48 -0500

Wetting balance

Bev Christian

Tue, 31 May 2005 15:39:47 -0400

Stadem, Richard

Tue, 31 May 2005 14:18:07 -0500

Ingemar Hernefjord (KC/EMW)

Tue, 31 May 2005 16:06:44 +0200

Bev Christian

Tue, 31 May 2005 09:14:42 -0400

Ingemar Hernefjord (KC/EMW)

Tue, 31 May 2005 09:37:40 +0200

Whittaker, Dewey (AZ75)

Fri, 27 May 2005 08:01:44 -0700

Wenger, George M.

Fri, 27 May 2005 10:59:54 -0400

Graham Naisbitt

Fri, 27 May 2005 15:29:45 +0100

Bev Christian

Fri, 27 May 2005 10:29:50 -0400

Wenger, George M.

Fri, 27 May 2005 10:21:26 -0400

Bev Christian

Fri, 27 May 2005 09:45:15 -0400

Deac Descoteaux

Fri, 27 May 2005 09:44:59 -0400

Brian Ellis

Fri, 27 May 2005 16:40:55 +0300

Bev Christian

Fri, 27 May 2005 09:25:15 -0400

Gerard O'Brien

Fri, 27 May 2005 08:55:50 -0400

Wenger, George M.

Thu, 26 May 2005 21:14:49 -0400

Stadem, Richard

Thu, 26 May 2005 12:35:45 -0500

Werner Engelmaier

Thu, 26 May 2005 13:02:30 -0400

Werner Engelmaier

Thu, 26 May 2005 08:46:11 -0400

Stadem, Richard

Thu, 26 May 2005 06:54:21 -0500

Wenger, George M.

Wed, 25 May 2005 16:56:28 -0400

Lee parker

Wed, 25 May 2005 16:41:27 -0400

Richard Kraszewski

Wed, 25 May 2005 15:35:41 -0500

Wenger, George M.

Wed, 25 May 2005 15:36:43 -0400

peter blokhuis

Wed, 25 May 2005 10:10:32 -0700

Munie, Gregory

Wed, 25 May 2005 08:17:41 -0500

Wetting balance, going off-topic!

Douglas O. Pauls

Wed, 25 May 2005 07:10:40 -0500

Wetting balance

Luigi Cantagallo

Wed, 25 May 2005 11:00:02 +0200

Re: Wetting balance, going off-topic!

Brian Ellis

Thu, 26 May 2005 11:36:11 +0300

What is ATE

Re: What is ATE

Ofer Cohen

Tue, 24 May 2005 12:27:06 +0200

What is ATE

Suganthi

Tue, 24 May 2005 14:45:29 +0530

Wire wrap

Crepeau, Phil (Space Technology)

Wed, 4 May 2005 10:37:39 -0700

Bev Christian

Wed, 4 May 2005 13:36:47 -0400

Phil Nutting

Wed, 4 May 2005 13:30:55 -0400

McGlaughlin, Jeffrey A

Wed, 4 May 2005 13:28:29 -0400

Linda Langley

Wed, 4 May 2005 13:28:53 -0400

Crepeau, Phil (Space Technology)

Wed, 4 May 2005 10:25:22 -0700

Wire wrap

Bob Arciolla

Wed, 4 May 2005 13:16:22 -0400

Wire wrap update

Dehoyos, Ramon

Thu, 5 May 2005 09:58:36 -0400

Bob Arciolla

Wed, 4 May 2005 16:02:18 -0400

Blomberg, Rainer (FL51)

Wed, 4 May 2005 12:28:58 -0700

Crepeau, Phil (Space Technology)

Wed, 4 May 2005 11:28:34 -0700

Bob Arciolla

Wed, 4 May 2005 14:27:32 -0400

Bev Christian

Wed, 4 May 2005 14:17:59 -0400

Wire wrap update

Bob Arciolla

Wed, 4 May 2005 14:09:13 -0400

X bar R charts

Happy Holden

Mon, 16 May 2005 18:53:03 -0400

Mary Jane Chism

Mon, 16 May 2005 15:01:05 -0500

Franklin D Asbell

Mon, 16 May 2005 14:49:51 -0500

Joyce Koo

Mon, 16 May 2005 15:41:17 -0400

X-ray equipment experiences...

Richard Kraszewski

Mon, 16 May 2005 14:06:49 -0500

X bar R charts

Brummer Chuck

Mon, 16 May 2005 10:49:59 -0700

X-Ray

Re: X-Ray

Victor G. Hernandez

Mon, 23 May 2005 11:59:22 -0500

Re: X-Ray

Al Onderick

Mon, 23 May 2005 11:36:19 -0500

X-Ray

Dehoyos, Ramon

Mon, 23 May 2005 09:24:43 -0400

Re: X-ray equipment experiences...

Stadem, Richard

Tue, 24 May 2005 14:20:35 -0500

Re: X-ray equipment experiences...

Phil Zarrow

Mon, 23 May 2005 02:52:26 EDT

Re: X-ray equipment experiences...

Werner Engelmaier

Fri, 20 May 2005 17:22:35 EDT

X-ray equipment experiences...

Stephen Gregory

Fri, 20 May 2005 16:14:28 -0500

XRAYed through holes ??

Gary Camac

Fri, 20 May 2005 11:07:11 -0500

Al Onderick

Fri, 20 May 2005 08:09:40 -0500

Gabriela Bogdan

Fri, 20 May 2005 07:58:33 +0200

Jeffrey Bush

Thu, 19 May 2005 16:45:37 -0400

Victor G. Hernandez

Thu, 19 May 2005 15:31:14 -0500