LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


April 2003


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

'Unique' BGA Reflow Problem (4 messages)
0402 resistors (4 messages)
0402/0202 Part Handling (4 messages)
1000 Pin PBGA .5mm pitch (25mmx25mm) (3 messages)
24 pin SOIC JEDEC land pattern request (1 message)
39%] [TN] Aspect Ratio&Area Ratio Defines (1 message)
3D-Xray Source? (6 messages)
: Shining smooth solder joint on ENIG or Gold plating Board. (1 message)
: velcro straps for matrix trays? (2 messages)
<No subject> (2 messages)
Aluminum and Halogenated Fluorocarbons (6 messages)
An apology, and a question (8 messages)
An apology, and a question... (5 messages)
AOI (11 messages)
Apertures for intrusive reflow (7 messages)
APEX 2003 Technetter get together... (2 messages)
Aspect Ratio&Area Ratio Defines (10 messages)
Bent BGA (2 messages)
BGA (8 messages)
BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he question'.... (2 messages)
BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he... (1 message)
BGA connector assembly question on flex board (2 messages)
BGA reflow (1 message)
BGA Void Acceptability IPC Standard (4 messages)
BGA's on both sides of an assembly (1 message)
Blued solder joints (9 messages)
Board Shop Audit (28 messages)
Board Shop Audit (+ ENIG question) (5 messages)
Board warpage (5 messages)
Brominated Hydrocarbons and Mountain Dew (NTC-sort of) (14 messages)
BVO, PVC, NTC, but relevant (4 messages)
CEM-1 (5 messages)
CLEANER (4 messages)
Cleaning Question - Rinse water resistivity? (12 messages)
cleaning under BGAs (8 messages)
Communication (1 message)
Communication style (NTC) (14 messages)
Component Identification (2 messages)
Component Prep (2 messages)
Componet Prep (3 messages)
Con Coat Stripper masking materials (7 messages)
Conductive Epoxy/Adhesive... (3 messages)
Controlled Solder (9 messages)
Cost Comparison of Flex Circuit Mat'l (8 messages)
CR Technology's CRX-2000 capability (4 messages)
Cracking in vias (6 messages)
CSP 0.8 and humidity (3 messages)
cupric chloride parameters (8 messages)
Custom Transformer Source (5 messages)
Date Change for Teleconference on Materials Declarations Handbook (1 message)
Defect rates. (2 messages)
Dek 265 (3 messages)
Dwindling members (10 messages)
Dwindling members, No Technical Content (7 messages)
dwindling numbers (8 messages)
EDX (7 messages)
ESD Damage and EEPROMs (2 messages)
Expansion Testing (2 messages)
Expiry time in vacuum package (11 messages)
External finish selection (3 messages)
FAB: Film Labeling Source (2 messages)
Fiducial clearance (3 messages)
Filling PTH with solder (2 messages)
Flex Board Assembly (5 messages)
Flex circuits and lead free (1 message)
Flip Chip Die Packaging (2 messages)
Flux activity _ Säurezahl (1 message)
FW: Gold PLating over Copper/or Nickel (3 messages)
Fw: Info (2 messages)
FW: [TN] Warpage NSTC (1 message)
gage R&R on TDR measurements (3 messages)
Gigaver - replacement? (3 messages)
Halogen-free No-flow Materials (12 messages)
HELLO TO ALL (1 message)
High resistance via (2 messages)
HSP 4792 part description. (4 messages)
ICT machines and high cleanliness requirements (8 messages)
In response to "niether a question or a response" (3 messages)
Info (14 messages)
Intermittent solder mask problems, again. (6 messages)
Ionograph 500m (1 message)
IPC certified training programs (8 messages)
IPC to Develop Handbook on Materials Declarations (3 messages)
IPC/HKPCA call for participation 2003 International Printed Circuit & Electronics Assembly Fair (1 message)
ISO and Board Shop Audits (2 messages)
Jewel cases for Texas Instrument part... (3 messages)
Leadtime (10 messages)
LIFE/NO OF INSERTIONS FOR ETP PROBE OF COPPER THICKNESS MEASURING EQPT-CMI-MODEL XRF-TRP-1A/S (1 message)
Listserv etiquette (1 message)
MARKING ON PTFE (3 messages)
MIL SPECS. (10 messages)
Minimum component spacing (5 messages)
modified gerber file (4 messages)
Molex 3BF, "the ancient" (1 message)
Neither a query, nor a response... (NON-TECHNICAL CONTEN T!) (1 message)
Neither a query, nor a response... (NON-TECHNICAL CONTENT!) (6 messages)
Neither a question, or a response... (10 messages)
New Topic: Why are most solder mask requirements, for GR EEN mask??? (5 messages)
New Topic: Why are most solder mask requirements, for GREEN mask??? (5 messages)
New Topic: Why are most solder mask requirements, for GREENmask??? (2 messages)
New Topic: Why are most solder mask requirements,for GREEN mask??? (1 message)
New Topic: Why are most solder mask requirements,for GREENm... (1 message)
New Topic: Why are most solder mask requirements,for GREENmas... (2 messages)
New Topic: Why are most solder mask requirements,for GREENmask??? (5 messages)
New Topic: Why GREEN and halide minimal. (2 messages)
Niether a question, or a response... (4 messages)
NPI (New Product Introductions) (11 messages)
NTC - Dwindling members - Just My Opinion... (1 message)
NTC - personnel whereabouts (1 message)
NTC? Hazards of chemicals, etc. (1 message)
Omega Testing AND No-Clean (11 messages)
oxygen index (5 messages)
Ozone usage limitations (1 message)
Packaging Standards (1 message)
Paste / flux separation (1 message)
PCB Material Question (13 messages)
Pizza Cutter (2 messages)
Please keep it up Steve.... (1 message)
Power Boards (3 messages)
problem with gold pads of the pcb (7 messages)
process capability (Cpk) (1 message)
Public review of Nordic ecolabelling criteria for Printed wiring (1 message)
PWB shop audit/assessment checklist (5 messages)
Raw card solderability (6 messages)
Re: [TN] Flux activity _ Säurezahl (1 message)
Request for help ESD Simulator. (2 messages)
Saponifiers and no-residue/no-clean fluxes (4 messages)
Sapponifiers and no-residue/no-clean fluxes (8 messages)
Seeking a Quad technician (3 messages)
selective wave solder pallets (7 messages)
selective wave solder pallets(1) (1 message)
Silver Fill Plugged Vias / Gold Body (1 message)
Single Lead IPC solder joint calculator (3 messages)
SMT part description standard (2 messages)
SMT utilization (4 messages)
SNEC Meeting (1 message)
Solder Balls (1 message)
SOLDER/EPOXY REACTION (4 messages)
Soldermask inspection question (4 messages)
Source for inspection stamps/ink (6 messages)
SRAM on bottomside (8 messages)
Stacked DRAM (4 messages)
Strain Gage Test + Copper Grade (2 messages)
Sulfamate NI?? (2 messages)
Surface Finish (5 messages)
TechNet E-mail forum / Lifted lands / As Received sample / Root c... (2 messages)
TechNet E-mail forum / Lifted lands / As Received sample / Root causes? (7 messages)
Test... (1 message)
This "verbage" thread - NTC (1 message)
Tin Anodes (1 message)
Tin Stripping (1 message)
Tin Whiskers (5 messages)
Too Much No Clean (8 messages)
UL Spacing requirements 1.5kV (3 messages)
Underfil with or without Encapsulate (1 message)
USE OF CAC / SEPARATORS (3 messages)
velcro straps for matrix trays? (18 messages)
via filling (3 messages)
Via Plugging (5 messages)
via-filling on build-up PCB's (2 messages)
Voids / Air Pockets in Laminates (5 messages)
Warp and Twist (3 messages)
Warpage (8 messages)
Warpage... long url link... (1 message)
Warped boards (6 messages)
Wave soldering - Spray fluxer parameters (5 messages)
Wave soldering SMD's (2 messages)
Wavesoldering SOT 23's (2 messages)
White Tin Processing Before Soldering (1 message)
wire assembly suggestions (7 messages)
wire coatings (10 messages)
[TN] Flux activity _ Säurezahl (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Steve Gregory <[log in to unmask]>

Fri, 18 Apr 2003 19:46:13 EDT

116 lines

Re:

Charles Caswell <[log in to unmask]>

Wed, 23 Apr 2003 08:33:04 -0500

77 lines

Re:

Mcmaster, Michael <[log in to unmask]>

Wed, 23 Apr 2003 11:36:56 -0700

211 lines

New Thread

'Unique' BGA Reflow Problem

'Unique' BGA Reflow Problem

Rick Thompson <[log in to unmask]>

Thu, 24 Apr 2003 09:45:32 -0700

42 lines

Re: 'Unique' BGA Reflow Problem

Marsico, James <[log in to unmask]>

Thu, 24 Apr 2003 13:00:30 -0400

77 lines

Re: 'Unique' BGA Reflow Problem

joyce <[log in to unmask]>

Thu, 24 Apr 2003 13:34:40 -0400

77 lines

Re: 'Unique' BGA Reflow Problem

Eli Sarig <[log in to unmask]>

Sat, 26 Apr 2003 10:08:32 +0200

78 lines

New Thread

0402 resistors

0402 resistors

Graham Collins <[log in to unmask]>

Wed, 2 Apr 2003 14:01:27 -0500

39 lines

Re: 0402 resistors

Daan Terstegge <[log in to unmask]>

Wed, 2 Apr 2003 21:36:28 +0200

76 lines

Re: 0402 resistors

Dorothy Lush <[log in to unmask]>

Wed, 2 Apr 2003 11:40:33 -0800

63 lines

Re: 0402 resistors

Steve Gregory <[log in to unmask]>

Wed, 2 Apr 2003 17:12:17 -0500

45 lines

New Thread

0402/0202 Part Handling

0402/0202 Part Handling

Sherry Warner <[log in to unmask]>

Tue, 29 Apr 2003 11:05:12 -0400

27 lines

Re: 0402/0202 Part Handling

Randy Bock Sr. <[log in to unmask]>

Tue, 29 Apr 2003 13:54:25 -0400

56 lines

Re: 0402/0202 Part Handling

Grabski III, John R. <[log in to unmask]>

Tue, 29 Apr 2003 14:33:40 -0400

86 lines

Re: 0402/0202 Part Handling

Dave Dixon <[log in to unmask]>

Tue, 29 Apr 2003 13:58:27 -0500

122 lines

New Thread

1000 Pin PBGA .5mm pitch (25mmx25mm)

1000 Pin PBGA .5mm pitch (25mmx25mm)

Scott Lefebvre <[log in to unmask]>

Fri, 4 Apr 2003 12:51:09 -0800

33 lines

Re: 1000 Pin PBGA .5mm pitch (25mmx25mm)

Dwight Mattix <[log in to unmask]>

Mon, 7 Apr 2003 19:53:35 -0700

56 lines

Re: 1000 Pin PBGA .5mm pitch (25mmx25mm)

Jim Kittel <[log in to unmask]>

Tue, 8 Apr 2003 06:24:32 -0600

104 lines

New Thread

24 pin SOIC JEDEC land pattern request

24 pin SOIC JEDEC land pattern request

Ian Rees <[log in to unmask]>

Mon, 7 Apr 2003 10:50:19 +1000

43 lines

New Thread

39%] [TN] Aspect Ratio&Area Ratio Defines

Re: 39%] [TN] Aspect Ratio&Area Ratio Defines

[log in to unmask]

Mon, 21 Apr 2003 09:16:37 -0700

65 lines

New Thread

3D-Xray Source?

3D-Xray Source?

Rick Thompson <[log in to unmask]>

Wed, 30 Apr 2003 09:28:14 -0700

35 lines

Re: 3D-Xray Source?

Joe Fjelstad <[log in to unmask]>

Wed, 30 Apr 2003 12:47:10 EDT

98 lines

Re: 3D-Xray Source?

Simonik, Dave <[log in to unmask]>

Wed, 30 Apr 2003 12:55:16 -0400

176 lines

Re: 3D-Xray Source?

Steve Gregory <[log in to unmask]>

Wed, 30 Apr 2003 14:06:03 EDT

111 lines

Re: 3D-Xray Source?

Macko, Joe @ IEC <[log in to unmask]>

Wed, 30 Apr 2003 12:12:03 -0700

74 lines

Re: 3D-Xray Source?

[log in to unmask]

Wed, 30 Apr 2003 21:45:35 EDT

76 lines

New Thread

: Shining smooth solder joint on ENIG or Gold plating Board.

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Sasha Miladinovic <[log in to unmask]>

Tue, 8 Apr 2003 13:01:31 +0200

535 lines

New Thread

: velcro straps for matrix trays?

Re: : velcro straps for matrix trays?

Ed Popielarski <[log in to unmask]>

Fri, 25 Apr 2003 08:09:35 -0700

149 lines

Re: : velcro straps for matrix trays?

Steve Gregory <[log in to unmask]>

Fri, 25 Apr 2003 14:06:03 EDT

155 lines

New Thread

<No subject>

<No subject>

Coleman, Bill <[log in to unmask]>

Fri, 18 Apr 2003 14:45:45 -0600

29 lines

<No subject>

Gray, Matthew D HS-SNS <[log in to unmask]>

Wed, 23 Apr 2003 08:39:21 -0400

36 lines

New Thread

Aluminum and Halogenated Fluorocarbons

Aluminum and Halogenated Fluorocarbons

Gaugler, Kevin <[log in to unmask]>

Wed, 30 Apr 2003 09:58:47 -0400

103 lines

Re: Aluminum and Halogenated Fluorocarbons

Rudy Sedlak <[log in to unmask]>

Wed, 30 Apr 2003 10:43:49 EDT

86 lines

Re: Aluminum and Halogenated Fluorocarbons

Crepeau, Phil <[log in to unmask]>

Wed, 30 Apr 2003 07:56:41 -0700

207 lines

Re: Aluminum and Halogenated Fluorocarbons

Gaugler, Kevin <[log in to unmask]>

Wed, 30 Apr 2003 11:07:52 -0400

222 lines

Re: Aluminum and Halogenated Fluorocarbons

Brian Ellis <[log in to unmask]>

Wed, 30 Apr 2003 19:02:54 +0300

79 lines

Re: Aluminum and Halogenated Fluorocarbons

Carroll, George <[log in to unmask]>

Wed, 30 Apr 2003 17:10:51 -0400

27 lines

New Thread

An apology, and a question

Re: An apology, and a question

Ed Popielarski <[log in to unmask]>

Tue, 15 Apr 2003 08:10:13 -0700

89 lines

Re: An apology, and a question

Brian Ellis <[log in to unmask]>

Tue, 15 Apr 2003 18:24:26 +0300

59 lines

Re: An apology, and a question

FOX, Ian (York Rd) <[log in to unmask]>

Tue, 15 Apr 2003 16:39:38 +0100

85 lines

Re: An apology, and a question

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 15 Apr 2003 11:23:36 -0400

113 lines

Re: An apology, and a question

Hal Winslow <[log in to unmask]>

Tue, 15 Apr 2003 11:42:34 -0400

85 lines

Re: An apology, and a question

Ed Popielarski <[log in to unmask]>

Tue, 15 Apr 2003 09:17:51 -0700

85 lines

Re: An apology, and a question

Bloomquist, Ken <[log in to unmask]>

Tue, 15 Apr 2003 09:27:19 -0700

43 lines

Re: An apology, and a question

Brian Ellis <[log in to unmask]>

Wed, 16 Apr 2003 10:17:23 +0300

101 lines

New Thread

An apology, and a question...

An apology, and a question...

Steve Gregory <[log in to unmask]>

Mon, 14 Apr 2003 20:32:29 EDT

118 lines

Re: An apology, and a question...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 15 Apr 2003 07:27:34 -0400

102 lines

Re: An apology, and a question...

Charles Caswell <[log in to unmask]>

Tue, 15 Apr 2003 07:15:19 -0500

219 lines

Re: An apology, and a question...

Lakshmi Dwivedula <[log in to unmask]>

Tue, 15 Apr 2003 08:12:40 -0400

224 lines

Re: An apology, and a question...

[log in to unmask]

Wed, 16 Apr 2003 08:09:42 +0800

155 lines

New Thread

AOI

AOI

Robert J. Vega <[log in to unmask]>

Wed, 16 Apr 2003 11:16:12 -0400

35 lines

Re: AOI

Kathy Kuhlow <[log in to unmask]>

Wed, 16 Apr 2003 10:23:11 -0500

70 lines

Re: AOI

Cagle, James <[log in to unmask]>

Wed, 16 Apr 2003 11:40:55 -0400

68 lines

Re: AOI

Laroe, Mike <[log in to unmask]>

Wed, 16 Apr 2003 11:59:22 -0400

34 lines

Re: AOI

Taylor, Royce <[log in to unmask]>

Wed, 16 Apr 2003 12:45:40 -0500

114 lines

Re: AOI

Kari Rambo <[log in to unmask]>

Wed, 16 Apr 2003 13:03:37 -0500

133 lines

Re: AOI

Darryl Tarpley <[log in to unmask]>

Mon, 21 Apr 2003 15:11:37 -0500

59 lines

Re: AOI

BRAD VANDERHOOF <[log in to unmask]>

Tue, 22 Apr 2003 03:32:55 -0700

101 lines

Re: AOI

Kari Rambo <[log in to unmask]>

Tue, 22 Apr 2003 07:47:21 -0500

136 lines

Re: AOI

Darryl Tarpley <[log in to unmask]>

Tue, 22 Apr 2003 12:57:48 -0500

43 lines

Re: AOI

Kari Rambo <[log in to unmask]>

Wed, 23 Apr 2003 10:17:57 -0500

76 lines

New Thread

Apertures for intrusive reflow

Apertures for intrusive reflow

Tempea, Ioan <[log in to unmask]>

Fri, 11 Apr 2003 08:21:59 -0400

38 lines

Re: Apertures for intrusive reflow

Miguel Vallejo <[log in to unmask]>

Fri, 11 Apr 2003 07:22:07 -0700

64 lines

Re: Apertures for intrusive reflow

David Schaefer <[log in to unmask]>

Fri, 11 Apr 2003 10:35:19 -0400

213 lines

Re: Apertures for intrusive reflow

Miguel Vallejo <[log in to unmask]>

Fri, 11 Apr 2003 08:00:22 -0700

281 lines

Re: Apertures for intrusive reflow

Morse, Carrie <[log in to unmask]>

Fri, 11 Apr 2003 11:37:13 -0400

81 lines

Re: Apertures for intrusive reflow

Howard Watson <[log in to unmask]>

Fri, 11 Apr 2003 13:01:16 -0400

173 lines

Re: Apertures for intrusive reflow

Coleman, Bill <[log in to unmask]>

Fri, 11 Apr 2003 17:10:15 -0600

121 lines

New Thread

APEX 2003 Technetter get together...

APEX 2003 Technetter get together...

Steve Gregory <[log in to unmask]>

Tue, 1 Apr 2003 19:11:18 EST

140 lines

Re: APEX 2003 Technetter get together...

Gaby Bogdan <[log in to unmask]>

Wed, 2 Apr 2003 06:56:26 +0200

156 lines

New Thread

Aspect Ratio&Area Ratio Defines

Aspect Ratio&Area Ratio Defines

Don_well <[log in to unmask]>

Mon, 21 Apr 2003 14:27:07 +0800

42 lines

Re: Aspect Ratio&Area Ratio Defines

Victor Hernandez <[log in to unmask]>

Wed, 23 Apr 2003 06:53:40 -0500

128 lines

Re: Aspect Ratio&Area Ratio Defines

Bresnan, Thomas <[log in to unmask]>

Wed, 23 Apr 2003 13:48:17 -0700

177 lines

Re: Aspect Ratio&Area Ratio Defines

Victor Hernandez <[log in to unmask]>

Wed, 23 Apr 2003 16:18:45 -0500

247 lines

Re: Aspect Ratio&Area Ratio Defines

McGlaughlin, Jeffrey A <[log in to unmask]>

Thu, 24 Apr 2003 07:21:28 -0400

161 lines

Re: Aspect Ratio&Area Ratio Defines

Roger Stoops <[log in to unmask]>

Thu, 24 Apr 2003 08:51:24 -0400

283 lines

Re: Aspect Ratio&Area Ratio Defines

Werner Engelmaier <[log in to unmask]>

Thu, 24 Apr 2003 11:33:44 EDT

32 lines

Re: Aspect Ratio&Area Ratio Defines

Werner Engelmaier <[log in to unmask]>

Thu, 24 Apr 2003 12:11:36 EDT

44 lines

Re: Aspect Ratio&Area Ratio Defines

Victor Hernandez <[log in to unmask]>

Thu, 24 Apr 2003 16:31:43 -0500

78 lines

Re: Aspect Ratio&Area Ratio Defines

Werner Engelmaier <[log in to unmask]>

Mon, 28 Apr 2003 01:09:02 EDT

36 lines

New Thread

Bent BGA

Bent BGA

Ofer Cohen <[log in to unmask]>

Tue, 15 Apr 2003 08:03:59 +0200

35 lines

Re: Bent BGA

David Douthit <[log in to unmask]>

Tue, 15 Apr 2003 05:34:48 -0700

60 lines

New Thread

BGA

Re: BGA

Dave Chapman <[log in to unmask]>

Mon, 28 Apr 2003 09:02:39 -0500

67 lines

Re: BGA

Reuven ROKAH <[log in to unmask]>

Mon, 28 Apr 2003 17:16:47 +0300

112 lines

Re: BGA

d. terstegge <[log in to unmask]>

Mon, 28 Apr 2003 16:38:05 +0200

124 lines

Re: BGA

Morse, Carrie <[log in to unmask]>

Mon, 28 Apr 2003 11:20:37 -0400

123 lines

Re: BGA

Eric Dawson <[log in to unmask]>

Mon, 28 Apr 2003 16:27:27 +0100

70 lines

Re: BGA

Charles Caswell <[log in to unmask]>

Mon, 28 Apr 2003 10:48:40 -0500

97 lines

Re: BGA

[log in to unmask]

Tue, 29 Apr 2003 07:49:03 +0800

127 lines

Re: BGA

JaMi Smith <[log in to unmask]>

Mon, 28 Apr 2003 17:16:13 -0700

202 lines

New Thread

BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he question'....

BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he question'....

Brooks,Bill <[log in to unmask]>

Fri, 25 Apr 2003 08:30:39 -0700

35 lines

Re: BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he question'....

Ted Kong <[log in to unmask]>

Fri, 25 Apr 2003 15:18:54 -0700

79 lines

New Thread

BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he...

Re: BGA .8mm pitch.... 'To Dog-bone, or not to Dog-bone.... that is t he...

[log in to unmask]

Mon, 28 Apr 2003 14:09:16 EDT

64 lines

New Thread

BGA connector assembly question on flex board

BGA connector assembly question on flex board

Don_well <[log in to unmask]>

Fri, 11 Apr 2003 12:56:19 +0800

70 lines

Re: BGA connector assembly question on flex board

Ted Kong <[log in to unmask]>

Mon, 14 Apr 2003 09:14:22 -0700

69 lines

New Thread

BGA reflow

BGA reflow

Macko, Joe @ IEC <[log in to unmask]>

Fri, 4 Apr 2003 13:39:33 -0800

39 lines

New Thread

BGA Void Acceptability IPC Standard

BGA Void Acceptability IPC Standard

Laroe, Mike <[log in to unmask]>

Tue, 29 Apr 2003 09:48:34 -0400

33 lines

Re: BGA Void Acceptability IPC Standard

Jensen, Juanita <[log in to unmask]>

Tue, 29 Apr 2003 06:58:13 -0700

63 lines

Re: BGA Void Acceptability IPC Standard

Joe Fjelstad <[log in to unmask]>

Tue, 29 Apr 2003 10:27:21 EDT

56 lines

Re: BGA Void Acceptability IPC Standard

Charley Dennehy <[log in to unmask]>

Wed, 30 Apr 2003 08:28:48 -0400

65 lines

New Thread

BGA's on both sides of an assembly

Re: BGA's on both sides of an assembly

Zweigart, Siegmund <[log in to unmask]>

Tue, 1 Apr 2003 13:08:37 +0200

98 lines

New Thread

Blued solder joints

Blued solder joints

Charlie Pitarys <[log in to unmask]>

Wed, 9 Apr 2003 15:56:04 -0400

109 lines

Re: Blued solder joints

Maguire, James F <[log in to unmask]>

Wed, 9 Apr 2003 13:10:42 -0700

502 lines

Re: Blued solder joints

joyce <[log in to unmask]>

Wed, 9 Apr 2003 16:16:19 -0400

550 lines

Re: Blued solder joints

Candace Garcia <[log in to unmask]>

Wed, 9 Apr 2003 17:07:14 -0400

601 lines

Re: Blued solder joints

Steve Gregory <[log in to unmask]>

Wed, 9 Apr 2003 18:04:49 EDT

146 lines

Re: Blued solder joints

Dave Hillman <[log in to unmask]>

Wed, 9 Apr 2003 17:55:59 -0500

103 lines

Re: Blued solder joints

Steve Gregory <[log in to unmask]>

Wed, 9 Apr 2003 20:00:29 EDT

108 lines

Re: Blued solder joints

Brian Ellis <[log in to unmask]>

Thu, 10 Apr 2003 13:06:02 +0300

73 lines

Re: Blued solder joints

Victor Hernandez <[log in to unmask]>

Thu, 10 Apr 2003 06:37:29 -0500

204 lines

New Thread

Board Shop Audit

Board Shop Audit

Franklin D Asbell <[log in to unmask]>

Tue, 1 Apr 2003 08:34:54 -0600

39 lines

Re: Board Shop Audit

[log in to unmask]

Tue, 1 Apr 2003 10:00:58 EST

61 lines

Re: Board Shop Audit

Steve MacDonald <[log in to unmask]>

Tue, 1 Apr 2003 11:29:03 -0500

114 lines

Re: Board Shop Audit

[log in to unmask]

Tue, 1 Apr 2003 12:45:00 EST

58 lines

Re: Board Shop Audit

[log in to unmask]

Tue, 1 Apr 2003 12:49:27 EST

59 lines

Re: Board Shop Audit

Franklin D Asbell <[log in to unmask]>

Tue, 1 Apr 2003 12:00:39 -0600

149 lines

Re: Board Shop Audit

Mark Hargreaves <[log in to unmask]>

Tue, 1 Apr 2003 14:38:42 -0500

57 lines

Re: Board Shop Audit

Steve MacDonald <[log in to unmask]>

Tue, 1 Apr 2003 15:26:45 -0500

100 lines

Board Shop Audit

Timothy A. Estes <[log in to unmask]>

Wed, 2 Apr 2003 09:29:14 -0700

38 lines

Re: Board Shop Audit

Blair K. Hogg <[log in to unmask]>

Wed, 2 Apr 2003 11:39:46 -0500

52 lines

Re: Board Shop Audit

Franklin D Asbell <[log in to unmask]>

Wed, 2 Apr 2003 11:07:14 -0600

73 lines

Re: Board Shop Audit

Randy Bock Sr. <[log in to unmask]>

Wed, 2 Apr 2003 12:23:47 -0500

107 lines

Re: Board Shop Audit

Roland Jaquet <[log in to unmask]>

Wed, 2 Apr 2003 21:53:54 +0200

381 lines

Re: Board Shop Audit

Kathy Kuhlow <[log in to unmask]>

Wed, 2 Apr 2003 14:49:45 -0600

102 lines

Re: Board Shop Audit

Valerie St.Cyr <[log in to unmask]>

Wed, 2 Apr 2003 17:16:49 -0500

44 lines

Re: Board Shop Audit

Franklin D Asbell <[log in to unmask]>

Wed, 2 Apr 2003 17:27:18 -0600

87 lines

Re: Board Shop Audit

BRAD VANDERHOOF <[log in to unmask]>

Thu, 3 Apr 2003 01:41:41 -0800

514 lines

Re: Board Shop Audit

d. terstegge <[log in to unmask]>

Thu, 3 Apr 2003 14:58:49 +0200

86 lines

Re: Board Shop Audit

paul reid <[log in to unmask]>

Thu, 3 Apr 2003 08:30:30 -0500

116 lines

Re: Board Shop Audit

Blair K. Hogg <[log in to unmask]>

Thu, 3 Apr 2003 08:50:31 -0500

134 lines

Re: Board Shop Audit

Edward Szpruch <[log in to unmask]>

Thu, 3 Apr 2003 16:54:55 +0200

135 lines

Re: Board Shop Audit

Richard Brennan <[log in to unmask]>

Thu, 3 Apr 2003 15:10:46 +0100

178 lines

Re: Board Shop Audit

Kari Rambo <[log in to unmask]>

Thu, 3 Apr 2003 08:39:34 -0600

179 lines

Re: Board Shop Audit

Ofer Cohen <[log in to unmask]>

Thu, 3 Apr 2003 18:13:11 +0200

142 lines

Re: Board Shop Audit

Steve MacDonald <[log in to unmask]>

Thu, 3 Apr 2003 10:41:01 -0500

161 lines

Re: Board Shop Audit

[log in to unmask]

Fri, 4 Apr 2003 08:22:54 +0800

179 lines

Re: Board Shop Audit

Ofer Cohen <[log in to unmask]>

Sun, 6 Apr 2003 09:36:26 +0200

78 lines

Re: Board Shop Audit

Hillel Dzigan <[log in to unmask]>

Sun, 6 Apr 2003 11:27:23 +0200

101 lines

New Thread

Board Shop Audit (+ ENIG question)

Re: Board Shop Audit (+ ENIG question)

d. terstegge <[log in to unmask]>

Wed, 2 Apr 2003 11:23:18 +0200

46 lines

Re: Board Shop Audit (+ ENIG question)

Zweigart, Siegmund <[log in to unmask]>

Wed, 2 Apr 2003 11:31:50 +0200

78 lines

Re: Board Shop Audit (+ ENIG question)

d. terstegge <[log in to unmask]>

Wed, 2 Apr 2003 11:45:36 +0200

116 lines

Re: Board Shop Audit (+ ENIG question)

[log in to unmask]

Wed, 2 Apr 2003 18:30:17 +0800

163 lines

Re: Board Shop Audit (+ ENIG question)

Franklin D Asbell <[log in to unmask]>

Wed, 2 Apr 2003 08:19:19 -0600

95 lines

New Thread

Board warpage

Board warpage

Carlr Ray <[log in to unmask]>

Tue, 1 Apr 2003 16:14:17 -0600

46 lines

Re: Board warpage

Jason W. Gregory <[log in to unmask]>

Tue, 1 Apr 2003 16:33:53 -0600

97 lines

Re: Board warpage

d. terstegge <[log in to unmask]>

Wed, 2 Apr 2003 09:52:54 +0200

82 lines

Re: Board warpage

Ofer Cohen <[log in to unmask]>

Wed, 2 Apr 2003 11:56:43 +0200

121 lines

Re: Board warpage

Dehoyos, Ramon <[log in to unmask]>

Wed, 2 Apr 2003 05:47:06 -0800

77 lines

New Thread

Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Mcmaster, Michael <[log in to unmask]>

Tue, 29 Apr 2003 08:56:48 -0700

125 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Gaugler, Kevin <[log in to unmask]>

Tue, 29 Apr 2003 12:11:44 -0400

178 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Hal Winslow <[log in to unmask]>

Tue, 29 Apr 2003 12:23:19 -0400

323 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Steve Gregory <[log in to unmask]>

Tue, 29 Apr 2003 12:24:49 EDT

282 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Bev Christian <[log in to unmask]>

Tue, 29 Apr 2003 12:34:50 -0400

444 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Collins Graham <[log in to unmask]>

Tue, 29 Apr 2003 12:38:37 -0400

192 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Munie, Gregory <[log in to unmask]>

Tue, 29 Apr 2003 12:25:22 -0500

488 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Charlie Pitarys <[log in to unmask]>

Tue, 29 Apr 2003 16:04:43 -0400

468 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

[log in to unmask]

Tue, 29 Apr 2003 15:23:06 -0500

106 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

David Ricketts <[log in to unmask]>

Tue, 29 Apr 2003 14:01:49 -0700

471 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Charlie Pitarys <[log in to unmask]>

Tue, 29 Apr 2003 17:21:18 -0400

496 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

[log in to unmask]

Wed, 30 Apr 2003 12:17:57 +0800

135 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

Randy Bock Sr. <[log in to unmask]>

Wed, 30 Apr 2003 12:25:42 -0400

166 lines

Re: Brominated Hydrocarbons and Mountain Dew (NTC-sort of)

joyce <[log in to unmask]>

Wed, 30 Apr 2003 12:27:59 -0400

227 lines

New Thread

BVO, PVC, NTC, but relevant

BVO, PVC, NTC, but relevant

Rudy Sedlak <[log in to unmask]>

Tue, 29 Apr 2003 14:04:56 EDT

67 lines

Re: BVO, PVC, NTC, but relevant

Gaugler, Kevin <[log in to unmask]>

Tue, 29 Apr 2003 14:12:56 -0400

96 lines

Re: BVO, PVC, NTC, but relevant

Joe Fjelstad <[log in to unmask]>

Tue, 29 Apr 2003 14:29:52 EDT

66 lines

Re: BVO, PVC, NTC, but relevant

Brian Ellis <[log in to unmask]>

Wed, 30 Apr 2003 11:07:50 +0300

131 lines

New Thread

CEM-1

CEM-1

Zweigart, Siegmund <[log in to unmask]>

Thu, 10 Apr 2003 13:42:24 +0200

101 lines

Re: CEM-1

Croslin, Robert <[log in to unmask]>

Thu, 10 Apr 2003 08:27:49 -0400

200 lines

Re: CEM-1

Geoff Layhe <[log in to unmask]>

Thu, 10 Apr 2003 13:34:36 +0100

218 lines

Re: CEM-1

Werner Engelmaier <[log in to unmask]>

Thu, 10 Apr 2003 12:10:11 EDT

30 lines

Re: CEM-1

Gary Camac <[log in to unmask]>

Thu, 10 Apr 2003 11:15:03 -0500

140 lines

New Thread

CLEANER

CLEANER

Dehoyos, Ramon <[log in to unmask]>

Fri, 25 Apr 2003 11:32:36 -0700

25 lines

Re: CLEANER

Rich Buccieri <[log in to unmask]>

Fri, 25 Apr 2003 13:40:07 -0500

51 lines

Re: CLEANER

Ed Popielarski <[log in to unmask]>

Sat, 26 Apr 2003 07:24:57 -0700

90 lines

Re: CLEANER

[log in to unmask]

Mon, 28 Apr 2003 12:38:35 +0800

74 lines

New Thread

Cleaning Question - Rinse water resistivity?

Cleaning Question - Rinse water resistivity?

Jason Wilson <[log in to unmask]>

Tue, 15 Apr 2003 13:39:48 -0500

35 lines

Re: Cleaning Question - Rinse water resistivity?

[log in to unmask]

Tue, 15 Apr 2003 14:31:40 -0500

87 lines

Re: Cleaning Question - Rinse water resistivity?

Wilson Jason <[log in to unmask]>

Wed, 16 Apr 2003 06:34:05 -0400

140 lines

Re: Cleaning Question - Rinse water resistivity?

Brian Ellis <[log in to unmask]>

Wed, 16 Apr 2003 13:53:25 +0300

84 lines

Re: Cleaning Question - Rinse water resistivity?

joyce <[log in to unmask]>

Wed, 16 Apr 2003 10:29:33 -0400

125 lines

Re: Cleaning Question - Rinse water resistivity?

[log in to unmask]

Thu, 17 Apr 2003 08:12:18 +0800

238 lines

Re: Cleaning Question - Rinse water resistivity?

Kane, Joseph <[log in to unmask]>

Fri, 18 Apr 2003 11:10:42 -0400

289 lines

Re: Cleaning Question - Rinse water resistivity?

Graham Naisbitt <[log in to unmask]>

Tue, 22 Apr 2003 11:47:24 +0100

69 lines

Re: Cleaning Question - Rinse water resistivity?

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 22 Apr 2003 07:48:09 -0400

104 lines

Re: Cleaning Question - Rinse water resistivity?

Graham Naisbitt <[log in to unmask]>

Tue, 22 Apr 2003 14:55:14 +0100

128 lines

Re: Cleaning Question - Rinse water resistivity?

Dehoyos, Ramon <[log in to unmask]>

Tue, 22 Apr 2003 07:15:23 -0700

171 lines

Re: Cleaning Question - Rinse water resistivity?

Kane, Joseph <[log in to unmask]>

Tue, 22 Apr 2003 10:46:37 -0400

200 lines

New Thread

cleaning under BGAs

cleaning under BGAs

Macko, Joe @ IEC <[log in to unmask]>

Sat, 26 Apr 2003 10:57:27 -0700

36 lines

Re: cleaning under BGAs

Charles Caswell <[log in to unmask]>

Sat, 26 Apr 2003 14:22:27 -0500

74 lines

Re: cleaning under BGAs

Brian Ellis <[log in to unmask]>

Sun, 27 Apr 2003 10:09:11 +0300

79 lines

Re: cleaning under BGAs

Charles Caswell <[log in to unmask]>

Sun, 27 Apr 2003 11:33:53 -0500

127 lines

Re: cleaning under BGAs

Kasprzak, Bill (sys) USX <[log in to unmask]>

Mon, 28 Apr 2003 07:42:08 -0400

75 lines

Re: cleaning under BGAs

Charlie Pitarys <[log in to unmask]>

Mon, 28 Apr 2003 11:00:12 -0400

365 lines

Re: cleaning under BGAs

Brian Ellis <[log in to unmask]>

Mon, 28 Apr 2003 18:41:13 +0300

186 lines

Re: cleaning under BGAs

Macko, Joe @ IEC <[log in to unmask]>

Mon, 28 Apr 2003 09:16:56 -0700

101 lines

New Thread

Communication

Communication

Richard Brennan <[log in to unmask]>

Tue, 22 Apr 2003 09:57:25 +0100

41 lines

New Thread

Communication style (NTC)

Communication style (NTC)

Eric Dawson <[log in to unmask]>

Tue, 22 Apr 2003 09:14:37 +0100

33 lines

Re: Communication style (NTC)

[log in to unmask]

Tue, 22 Apr 2003 16:59:04 +0800

97 lines

Re: Communication style (NTC)

Sasha Miladinovic <[log in to unmask]>

Tue, 22 Apr 2003 11:16:37 +0200

203 lines

Re: Communication style (NTC)

Marie-Elisabeth MAGNIN <[log in to unmask]>

Tue, 22 Apr 2003 11:34:43 +0200

332 lines

Re: Communication style (NTC)

Brian Ellis <[log in to unmask]>

Tue, 22 Apr 2003 13:34:14 +0300

50 lines

Re: Communication style (NTC)

Randy Bock Sr. <[log in to unmask]>

Tue, 22 Apr 2003 08:32:50 -0400

123 lines

Re: Communication style (NTC)

Grabski III, John R. <[log in to unmask]>

Tue, 22 Apr 2003 08:52:25 -0400

118 lines

Re: Communication style (NTC)

Werner Engelmaier <[log in to unmask]>

Tue, 22 Apr 2003 21:30:42 EDT

26 lines

Re: Communication style (NTC)

Steve Gregory <[log in to unmask]>

Tue, 22 Apr 2003 21:48:06 EDT

87 lines

Re: Communication style (NTC)

Randy Bock Sr. <[log in to unmask]>

Wed, 23 Apr 2003 07:39:17 -0400

167 lines

Re: Communication style (NTC)

Jack C. Olson <[log in to unmask]>

Wed, 23 Apr 2003 09:16:09 -0500

78 lines

Re: Communication style (NTC)

Crepeau, Phil <[log in to unmask]>

Wed, 23 Apr 2003 07:36:31 -0700

126 lines

Re: Communication style (NTC)

Dave Dixon <[log in to unmask]>

Wed, 23 Apr 2003 09:58:03 -0500

80 lines

Re: Communication style (NTC)

Laroe, Mike <[log in to unmask]>

Wed, 23 Apr 2003 11:01:40 -0400

149 lines

New Thread

Component Identification

Component Identification

McGlaughlin, Jeffrey A <[log in to unmask]>

Wed, 23 Apr 2003 08:56:28 -0400

107 lines

Re: Component Identification

Roger Stoops <[log in to unmask]>

Wed, 23 Apr 2003 09:02:18 -0400

183 lines

New Thread

Component Prep

Re: Component Prep

Dehoyos, Ramon <[log in to unmask]>

Mon, 28 Apr 2003 09:47:57 -0700

65 lines

Re: Component Prep

[log in to unmask]

Tue, 29 Apr 2003 08:55:04 +0800

111 lines

New Thread

Componet Prep

Componet Prep

Barbara Sillanpaa <[log in to unmask]>

Mon, 28 Apr 2003 10:24:15 -0500

35 lines

Re: Componet Prep

Jensen, Juanita <[log in to unmask]>

Mon, 28 Apr 2003 09:38:32 -0700

72 lines

Re: Componet Prep

Juan T. Marugán <[log in to unmask]>

Tue, 29 Apr 2003 05:41:59 -0500

28 lines

New Thread

Con Coat Stripper masking materials

Con Coat Stripper masking materials

[log in to unmask]

Tue, 15 Apr 2003 10:35:59 +0800

45 lines

Re: Con Coat Stripper masking materials

Lakshmi Dwivedula <[log in to unmask]>

Tue, 15 Apr 2003 07:36:30 -0400

82 lines

Re: Con Coat Stripper masking materials

Charles Caswell <[log in to unmask]>

Tue, 15 Apr 2003 07:11:18 -0500

78 lines

Re: Con Coat Stripper masking materials

[log in to unmask]

Wed, 16 Apr 2003 08:30:49 +0800

96 lines

Re: Con Coat Stripper masking materials

[log in to unmask]

Wed, 16 Apr 2003 08:41:18 +0800

129 lines

Re: Con Coat Stripper masking materials

Lakshmi Dwivedula <[log in to unmask]>

Wed, 16 Apr 2003 06:11:42 -0400

134 lines

Re: Con Coat Stripper masking materials

Charles Caswell <[log in to unmask]>

Wed, 16 Apr 2003 07:04:25 -0500

174 lines

New Thread

Conductive Epoxy/Adhesive...

Conductive Epoxy/Adhesive...

Kevin Syverson <[log in to unmask]>

Fri, 4 Apr 2003 07:32:45 -0800

274 lines

Re: Conductive Epoxy/Adhesive...

Brian Ellis <[log in to unmask]>

Fri, 4 Apr 2003 18:55:09 +0300

73 lines

Re: Conductive Epoxy/Adhesive...

Creswick, Steven <[log in to unmask]>

Fri, 4 Apr 2003 14:11:33 -0500

376 lines

New Thread

Controlled Solder

Controlled Solder

Angela Gregor <[log in to unmask]>

Thu, 17 Apr 2003 13:44:08 -0400

32 lines

Re: Controlled Solder

Laroe, Mike <[log in to unmask]>

Thu, 17 Apr 2003 14:05:47 -0400

77 lines

Re: Controlled Solder

David Fish <[log in to unmask]>

Thu, 17 Apr 2003 21:33:37 -0400

71 lines

Re: Controlled Solder

Dave Hillman <[log in to unmask]>

Fri, 18 Apr 2003 08:12:46 -0500

77 lines

Re: Controlled Solder

[log in to unmask]

Fri, 18 Apr 2003 08:26:58 -0500

24 lines

Re: Controlled Solder

Dave Hillman <[log in to unmask]>

Fri, 18 Apr 2003 08:31:29 -0500

42 lines

Re: Controlled Solder

Ed Popielarski <[log in to unmask]>

Fri, 18 Apr 2003 06:53:11 -0700

101 lines

Re: Controlled Solder

Randy Bock Sr. <[log in to unmask]>

Fri, 18 Apr 2003 11:41:24 -0400

50 lines

Re: Controlled Solder

Dehoyos, Ramon <[log in to unmask]>

Tue, 22 Apr 2003 13:12:18 -0700

102 lines

New Thread

Cost Comparison of Flex Circuit Mat'l

Cost Comparison of Flex Circuit Mat'l

Roger Stoops <[log in to unmask]>

Tue, 22 Apr 2003 16:26:22 -0400

41 lines

Re: Cost Comparison of Flex Circuit Mat'l

Steve kelly <[log in to unmask]>

Tue, 22 Apr 2003 17:14:48 -0400

76 lines

Re: Cost Comparison of Flex Circuit Mat'l

Brummer Chuck <[log in to unmask]>

Tue, 22 Apr 2003 14:48:28 -0700

157 lines

Re: Cost Comparison of Flex Circuit Mat'l

Ted Edwards <[log in to unmask]>

Tue, 22 Apr 2003 18:04:44 -0700

75 lines

Re: Cost Comparison of Flex Circuit Mat'l

Zweigart, Siegmund <[log in to unmask]>

Wed, 23 Apr 2003 10:04:44 +0200

73 lines

Re: Cost Comparison of Flex Circuit Mat'l

Roger Stoops <[log in to unmask]>

Wed, 23 Apr 2003 08:49:43 -0400

118 lines

Re: Cost Comparison of Flex Circuit Mat'l

Roger Stoops <[log in to unmask]>

Wed, 23 Apr 2003 08:49:52 -0400

121 lines

Re: Cost Comparison of Flex Circuit Mat'l

[log in to unmask]

Mon, 28 Apr 2003 13:50:57 EDT

71 lines

New Thread

CR Technology's CRX-2000 capability

CR Technology's CRX-2000 capability

[log in to unmask]

Wed, 30 Apr 2003 13:51:56 -0700

38 lines

Re: CR Technology's CRX-2000 capability

Tempea, Ioan <[log in to unmask]>

Wed, 30 Apr 2003 17:06:22 -0400

77 lines

Re: CR Technology's CRX-2000 capability

Steve Gregory <[log in to unmask]>

Wed, 30 Apr 2003 17:08:27 EDT

106 lines

Re: CR Technology's CRX-2000 capability

Rick Thompson <[log in to unmask]>

Wed, 30 Apr 2003 16:53:50 -0700

87 lines

New Thread

Cracking in vias

Cracking in vias

Keith Calhoun <[log in to unmask]>

Fri, 18 Apr 2003 13:24:48 -0500

25 lines

Re: Cracking in vias

Bill Decray <[log in to unmask]>

Fri, 18 Apr 2003 14:56:08 -0400

65 lines

Re: Cracking in vias

Steve Gregory <[log in to unmask]>

Fri, 18 Apr 2003 16:30:39 EDT

94 lines

Re: Cracking in vias

Mcmaster, Michael <[log in to unmask]>

Fri, 18 Apr 2003 13:43:43 -0700

224 lines

Re: Cracking in vias

Keith Calhoun <[log in to unmask]>

Sat, 19 Apr 2003 11:42:55 -0400

245 lines

Re: Cracking in vias

[log in to unmask]

Mon, 21 Apr 2003 08:15:29 +0800

202 lines

New Thread

CSP 0.8 and humidity

CSP 0.8 and humidity

Guenter Grossmann <[log in to unmask]>

Tue, 1 Apr 2003 14:25:36 +0200

47 lines

Re: CSP 0.8 and humidity

Zweigart, Siegmund <[log in to unmask]>

Tue, 1 Apr 2003 15:09:53 +0200

83 lines

Re: CSP 0.8 and humidity

joyce <[log in to unmask]>

Tue, 1 Apr 2003 13:26:59 -0500

101 lines

New Thread

cupric chloride parameters

cupric chloride parameters

Adam Seychell <[log in to unmask]>

Tue, 8 Apr 2003 22:51:39 -0500

48 lines

Re: cupric chloride parameters

Brian Ellis <[log in to unmask]>

Wed, 9 Apr 2003 08:59:54 +0300

83 lines

Re: cupric chloride parameters

Edward Szpruch <[log in to unmask]>

Wed, 9 Apr 2003 09:30:42 +0200

134 lines

Re: cupric chloride parameters

Phil Culpovich <[log in to unmask]>

Tue, 8 Apr 2003 23:49:15 -0700

99 lines

Re: cupric chloride parameters

Adam Seychell <[log in to unmask]>

Wed, 9 Apr 2003 04:00:29 -0500

45 lines

Re: cupric chloride parameters

Carroll, George <[log in to unmask]>

Wed, 9 Apr 2003 08:46:37 -0400

79 lines

Re: cupric chloride parameters

Rudy Sedlak <[log in to unmask]>

Wed, 9 Apr 2003 09:51:10 EDT

56 lines

Re: cupric chloride parameters

Phil Culpovich <[log in to unmask]>

Wed, 9 Apr 2003 09:53:55 -0700

126 lines

New Thread

Custom Transformer Source

Custom Transformer Source

Croslin, Robert <[log in to unmask]>

Tue, 22 Apr 2003 09:50:36 -0400

28 lines

Re: Custom Transformer Source

Randy Bock Sr. <[log in to unmask]>

Tue, 22 Apr 2003 10:06:41 -0400

61 lines

Re: Custom Transformer Source

Blair K. Hogg <[log in to unmask]>

Tue, 22 Apr 2003 10:05:32 -0400

71 lines

Re: Custom Transformer Source

David Fish <[log in to unmask]>

Tue, 22 Apr 2003 10:11:56 -0400

75 lines

Re: Custom Transformer Source

Croslin, Robert <[log in to unmask]>

Tue, 22 Apr 2003 10:36:59 -0400

96 lines

New Thread

Date Change for Teleconference on Materials Declarations Handbook

Date Change for Teleconference on Materials Declarations Handbook

Jack Crawford <[log in to unmask]>

Mon, 14 Apr 2003 10:53:22 -0500

77 lines

New Thread

Defect rates.

Defect rates.

Henry Rekers <[log in to unmask]>

Tue, 29 Apr 2003 13:45:33 -0700

39 lines

Re: Defect rates.

Leland Woodall <[log in to unmask]>

Tue, 29 Apr 2003 20:44:35 -0400

80 lines

New Thread

Dek 265

Dek 265

Chad Haima <[log in to unmask]>

Tue, 22 Apr 2003 09:53:01 -0700

312 lines

Re: Dek 265

Jesse Martin <[log in to unmask]>

Tue, 22 Apr 2003 13:39:04 -0400

46 lines

Re: Dek 265

Crepeau, Phil <[log in to unmask]>

Tue, 22 Apr 2003 11:23:17 -0700

120 lines

New Thread

Dwindling members

Dwindling members

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 15 Apr 2003 10:51:42 -0400

32 lines

Re: Dwindling members

Eric Christison <[log in to unmask]>

Tue, 15 Apr 2003 16:01:13 +0100

43 lines

Re: Dwindling members

Randy Bock Sr. <[log in to unmask]>

Tue, 15 Apr 2003 12:33:06 -0400

73 lines

Re: Dwindling members

Graham Naisbitt <[log in to unmask]>

Tue, 15 Apr 2003 17:34:03 +0100

82 lines

Re: Dwindling members

Eric Christison <[log in to unmask]>

Tue, 15 Apr 2003 18:05:53 +0100

106 lines

Re: Dwindling members

Ofer Cohen <[log in to unmask]>

Tue, 15 Apr 2003 20:18:42 +0200

32 lines

Re: Dwindling members

Joe Fjelstad <[log in to unmask]>

Tue, 15 Apr 2003 13:23:59 EDT

58 lines

Re: Dwindling members

Yu, Rudolph <[log in to unmask]>

Tue, 15 Apr 2003 10:48:44 -0700

36 lines

Re: Dwindling members

Daan Terstegge <[log in to unmask]>

Tue, 15 Apr 2003 21:16:35 +0200

161 lines

Re: Dwindling members

Eric Dawson <[log in to unmask]>

Wed, 16 Apr 2003 07:39:27 +0100

130 lines

New Thread

Dwindling members, No Technical Content

Re: Dwindling members, No Technical Content

Ted Edwards <[log in to unmask]>

Tue, 15 Apr 2003 08:58:41 -0700

72 lines

Re: Dwindling members, No Technical Content

Randy Bock Sr. <[log in to unmask]>

Tue, 15 Apr 2003 12:56:39 -0400

107 lines

Re: Dwindling members, No Technical Content

Victor Hernandez <[log in to unmask]>

Tue, 15 Apr 2003 11:59:56 -0500

141 lines

Re: Dwindling members, No Technical Content

Steve MacDonald <[log in to unmask]>

Tue, 15 Apr 2003 13:26:18 -0400

151 lines

Re: Dwindling members, No Technical Content

Joe Fjelstad <[log in to unmask]>

Tue, 15 Apr 2003 13:32:37 EDT

51 lines

Re: Dwindling members, No Technical Content

Mcmaster, Michael <[log in to unmask]>

Tue, 15 Apr 2003 10:46:20 -0700

486 lines

Re: Dwindling members, No Technical Content

joyce <[log in to unmask]>

Tue, 15 Apr 2003 14:14:22 -0400

954 lines

New Thread

dwindling numbers

Re: dwindling numbers

J. Brewer <[log in to unmask]>

Tue, 15 Apr 2003 13:34:51 -0400

31 lines

Re: dwindling numbers

Roland Jaquet <[log in to unmask]>

Wed, 16 Apr 2003 13:30:36 +0200

366 lines

Re: dwindling numbers

Brian Ellis <[log in to unmask]>

Wed, 16 Apr 2003 15:06:06 +0300

62 lines

Re: dwindling numbers

Roland Jaquet <[log in to unmask]>

Wed, 16 Apr 2003 18:44:17 +0200

332 lines

Re: dwindling numbers

Jeff Seeger <[log in to unmask]>

Wed, 16 Apr 2003 13:02:35 -0400

62 lines

Re: dwindling numbers

J. Brewer <[log in to unmask]>

Wed, 16 Apr 2003 14:01:01 -0400

33 lines

Re: dwindling numbers

joyce <[log in to unmask]>

Wed, 16 Apr 2003 14:26:31 -0400

66 lines

Re: dwindling numbers

Brian Ellis <[log in to unmask]>

Fri, 18 Apr 2003 19:32:28 +0300

198 lines

New Thread

EDX

EDX

Stolar, Paul W <[log in to unmask]>

Tue, 8 Apr 2003 12:29:54 -0500

39 lines

Re: EDX

Richard Fudalewski <[log in to unmask]>

Tue, 8 Apr 2003 13:36:12 -0400

65 lines

Re: EDX

Bev Christian <[log in to unmask]>

Tue, 8 Apr 2003 13:40:20 -0400

72 lines

Re: EDX

Bev Christian <[log in to unmask]>

Tue, 8 Apr 2003 13:48:24 -0400

73 lines

Re: EDX

Wenger, George M. <[log in to unmask]>

Tue, 8 Apr 2003 13:54:21 -0400

89 lines

Re: EDX

Blair K. Hogg <[log in to unmask]>

Tue, 8 Apr 2003 13:49:23 -0400

73 lines

Re: EDX

Zweigart, Siegmund <[log in to unmask]>

Wed, 9 Apr 2003 09:16:09 +0200

63 lines

New Thread

ESD Damage and EEPROMs

ESD Damage and EEPROMs

Dacia Super <[log in to unmask]>

Wed, 9 Apr 2003 16:34:24 -0500

116 lines

Re: ESD Damage and EEPROMs

Dave Dixon <[log in to unmask]>

Thu, 10 Apr 2003 09:05:19 -0500

149 lines

New Thread

Expansion Testing

Expansion Testing

Carlr Ray <[log in to unmask]>

Thu, 24 Apr 2003 10:38:41 -0500

33 lines

Re: Expansion Testing

Creswick, Steven <[log in to unmask]>

Thu, 24 Apr 2003 12:05:24 -0400

64 lines

New Thread

Expiry time in vacuum package

Expiry time in vacuum package

Reuven ROKAH <[log in to unmask]>

Sun, 27 Apr 2003 10:27:35 +0300

30 lines

Re: Expiry time in vacuum package

Brian Ellis <[log in to unmask]>

Sun, 27 Apr 2003 12:06:15 +0300

52 lines

Re: Expiry time in vacuum package

Reuven ROKAH <[log in to unmask]>

Sun, 27 Apr 2003 12:49:02 +0300

104 lines

Re: Expiry time in vacuum package

Brian Ellis <[log in to unmask]>

Sun, 27 Apr 2003 13:38:45 +0300

143 lines

Re: Expiry time in vacuum package

Reuven ROKAH <[log in to unmask]>

Sun, 27 Apr 2003 13:48:56 +0300

197 lines

Re: Expiry time in vacuum package

Brian Ellis <[log in to unmask]>

Sun, 27 Apr 2003 14:07:03 +0300

256 lines

Re: Expiry time in vacuum package

Charles Caswell <[log in to unmask]>

Sun, 27 Apr 2003 13:30:21 -0500

72 lines

Expiry time in vacuum package

Francois Monette <[log in to unmask]>

Mon, 28 Apr 2003 13:31:14 -0400

90 lines

Re: Expiry time in vacuum package

Reuven ROKAH <[log in to unmask]>

Tue, 29 Apr 2003 08:31:32 +0300

144 lines

Re: Expiry time in vacuum package

Francois Monette <[log in to unmask]>

Tue, 29 Apr 2003 14:18:17 -0400

180 lines

Re: Expiry time in vacuum package

Reuven ROKAH <[log in to unmask]>

Wed, 30 Apr 2003 08:47:22 +0300

228 lines

New Thread

External finish selection

External finish selection

Ofer Cohen <[log in to unmask]>

Wed, 30 Apr 2003 16:47:18 +0200

40 lines

Re: External finish selection

Franklin D Asbell <[log in to unmask]>

Wed, 30 Apr 2003 10:42:59 -0500

81 lines

Re: External finish selection

Jeff Seeger <[log in to unmask]>

Wed, 30 Apr 2003 11:50:18 -0400

46 lines

New Thread

FAB: Film Labeling Source

FAB: Film Labeling Source

John Parsons <[log in to unmask]>

Mon, 14 Apr 2003 16:27:57 -0700

36 lines

Re: FAB: Film Labeling Source

Mark Hargreaves <[log in to unmask]>

Tue, 15 Apr 2003 08:29:48 -0400

76 lines

New Thread

Fiducial clearance

Fiducial clearance

Adair, Bret <[log in to unmask]>

Fri, 11 Apr 2003 14:21:54 -0700

65 lines

Re: Fiducial clearance

Cyker, Howard A (Howie) <[log in to unmask]>

Fri, 11 Apr 2003 17:32:10 -0400

131 lines

Re: Fiducial clearance

Adair, Bret <[log in to unmask]>

Fri, 11 Apr 2003 15:50:55 -0700

163 lines

New Thread

Filling PTH with solder

Filling PTH with solder

Peter L. <[log in to unmask]>

Mon, 7 Apr 2003 13:18:47 -0500

31 lines

Re: Filling PTH with solder

Morse, Carrie <[log in to unmask]>

Mon, 7 Apr 2003 15:48:50 -0400

70 lines

New Thread

Flex Board Assembly

Flex Board Assembly

Don_well <[log in to unmask]>

Thu, 17 Apr 2003 09:20:33 +0800

69 lines

Re: Flex Board Assembly

Russ Steiner <[log in to unmask]>

Thu, 17 Apr 2003 08:50:09 -0400

193 lines

Re: Flex Board Assembly

Kathy Kuhlow <[log in to unmask]>

Thu, 17 Apr 2003 08:01:03 -0500

67 lines

Re: Flex Board Assembly

Werner Engelmaier <[log in to unmask]>

Thu, 17 Apr 2003 16:12:17 EDT

35 lines

Re: Flex Board Assembly

Barbara Burcham <[log in to unmask]>

Thu, 17 Apr 2003 16:27:01 -0500

65 lines

New Thread

Flex circuits and lead free

Flex circuits and lead free

Steve kelly <[log in to unmask]>

Wed, 2 Apr 2003 16:34:27 -0500

137 lines

New Thread

Flip Chip Die Packaging

Flip Chip Die Packaging

Glenn Pelkey <[log in to unmask]>

Thu, 24 Apr 2003 11:16:58 -0700

29 lines

Re: Flip Chip Die Packaging

Creswick, Steven <[log in to unmask]>

Fri, 25 Apr 2003 05:23:06 -0400

77 lines

New Thread

Flux activity _ Säurezahl

Flux activity _ Säurezahl

Zweigart, Siegmund <[log in to unmask]>

Tue, 1 Apr 2003 15:50:27 +0200

34 lines

New Thread

FW: Gold PLating over Copper/or Nickel

FW: Gold PLating over Copper/or Nickel

Edwin Louis <[log in to unmask]>

Tue, 1 Apr 2003 10:48:39 -0500

42 lines

Re: FW: Gold PLating over Copper/or Nickel

Eddie Rocha <[log in to unmask]>

Tue, 1 Apr 2003 15:23:32 -0800

24 lines

Re: FW: Gold PLating over Copper/or Nickel

Valerie St.Cyr <[log in to unmask]>

Wed, 2 Apr 2003 17:27:00 -0500

36 lines

New Thread

Fw: Info

Fw: Info

kon akbar <[log in to unmask]>

Sun, 13 Apr 2003 07:51:02 -0400

109 lines

Re: Fw: Info

BRAD VANDERHOOF <[log in to unmask]>

Sun, 13 Apr 2003 05:26:24 -0700

202 lines

New Thread

FW: [TN] Warpage NSTC

FW: [TN] Warpage NSTC

joyce <[log in to unmask]>

Fri, 25 Apr 2003 10:15:48 -0400

194 lines

New Thread

gage R&R on TDR measurements

gage R&R on TDR measurements

Bresnan, Thomas <[log in to unmask]>

Tue, 15 Apr 2003 12:18:26 -0700

101 lines

Re: gage R&R on TDR measurements

Brian Butler <[log in to unmask]>

Tue, 15 Apr 2003 17:10:01 -0600

169 lines

Re: gage R&R on TDR measurements

Valerie St.Cyr <[log in to unmask]>

Wed, 16 Apr 2003 14:26:25 -0400

141 lines

New Thread

Gigaver - replacement?

Gigaver - replacement?

Zweigart, Siegmund <[log in to unmask]>

Wed, 16 Apr 2003 08:44:09 +0200

30 lines

Re: Gigaver - replacement?

Geoff Layhe <[log in to unmask]>

Wed, 16 Apr 2003 09:37:11 +0100

63 lines

Re: Gigaver - replacement?

Mcmaster, Michael <[log in to unmask]>

Wed, 16 Apr 2003 10:56:21 -0700

311 lines

New Thread

Halogen-free No-flow Materials

Halogen-free No-flow Materials

Mcmaster, Michael <[log in to unmask]>

Tue, 15 Apr 2003 12:24:18 -0700

93 lines

Re: Halogen-free No-flow Materials

David Douthit <[log in to unmask]>

Tue, 15 Apr 2003 18:58:14 -0700

125 lines

Re: Halogen-free No-flow Materials

d. terstegge <[log in to unmask]>

Wed, 16 Apr 2003 09:16:58 +0200

100 lines

Re: Halogen-free No-flow Materials

Zweigart, Siegmund <[log in to unmask]>

Wed, 16 Apr 2003 09:27:57 +0200

125 lines

Re: Halogen-free No-flow Materials

[log in to unmask]

Wed, 16 Apr 2003 15:44:06 +0800

171 lines

Re: Halogen-free No-flow Materials

Zweigart, Siegmund <[log in to unmask]>

Wed, 16 Apr 2003 09:49:27 +0200

192 lines

Re: Halogen-free No-flow Materials

Geoff Layhe <[log in to unmask]>

Wed, 16 Apr 2003 09:32:05 +0100

170 lines

Re: Halogen-free No-flow Materials

d. terstegge <[log in to unmask]>

Wed, 16 Apr 2003 10:45:30 +0200

128 lines

Re: Halogen-free No-flow Materials

Geoff Layhe <[log in to unmask]>

Wed, 16 Apr 2003 10:38:21 +0100

162 lines

Re: Halogen-free No-flow Materials

David Douthit <[log in to unmask]>

Wed, 16 Apr 2003 05:39:29 -0700

149 lines

Re: Halogen-free No-flow Materials

Tim Reeves <[log in to unmask]>

Wed, 16 Apr 2003 11:55:01 -0700

153 lines

Re: Halogen-free No-flow Materials

Mcmaster, Michael <[log in to unmask]>

Wed, 16 Apr 2003 14:38:22 -0700

608 lines

New Thread

HELLO TO ALL

HELLO TO ALL

John S. Grosso <[log in to unmask]>

Mon, 28 Apr 2003 12:24:26 -0500

24 lines

New Thread

High resistance via

High resistance via

Gary Camac <[log in to unmask]>

Tue, 29 Apr 2003 11:21:19 -0500

33 lines

Re: High resistance via

Steve Gregory <[log in to unmask]>

Wed, 30 Apr 2003 18:17:14 EDT

98 lines

New Thread

HSP 4792 part description.

HSP 4792 part description.

Barry Gallegos <[log in to unmask]>

Tue, 1 Apr 2003 07:08:47 -0700

32 lines

Re: HSP 4792 part description.

David Fish <[log in to unmask]>

Tue, 1 Apr 2003 10:11:23 -0500

61 lines

Re: HSP 4792 part description.

Taylor, Royce <[log in to unmask]>

Tue, 1 Apr 2003 09:23:44 -0600

110 lines

Re: HSP 4792 part description.

Barry Gallegos <[log in to unmask]>

Tue, 1 Apr 2003 09:42:07 -0700

85 lines

New Thread

ICT machines and high cleanliness requirements

ICT machines and high cleanliness requirements

[log in to unmask]

Tue, 15 Apr 2003 10:20:57 +0800

73 lines

Re: ICT machines and high cleanliness requirements

Brian Ellis <[log in to unmask]>

Tue, 15 Apr 2003 10:20:39 +0300

168 lines

Re: ICT machines and high cleanliness requirements

[log in to unmask]

Tue, 15 Apr 2003 17:38:52 +0800

276 lines

Re: ICT machines and high cleanliness requirements

Miller, Greg @ DISPLAYS <[log in to unmask]>

Tue, 15 Apr 2003 08:33:46 -0400

319 lines

Re: ICT machines and high cleanliness requirements

Brian Ellis <[log in to unmask]>

Tue, 15 Apr 2003 17:27:24 +0300

414 lines

Re: ICT machines and high cleanliness requirements

[log in to unmask]

Wed, 16 Apr 2003 09:01:23 +0800

367 lines

Re: ICT machines and high cleanliness requirements

Miller, Greg @ DISPLAYS <[log in to unmask]>

Wed, 16 Apr 2003 09:12:15 -0400

415 lines

Re: ICT machines and high cleanliness requirements

[log in to unmask]

Thu, 17 Apr 2003 09:56:32 +0800

470 lines

New Thread

In response to "niether a question or a response"

In response to "niether a question or a response"

Franklin D Asbell <[log in to unmask]>

Mon, 14 Apr 2003 16:01:26 -0500

35 lines

Re: In response to "niether a question or a response"

Jeff Seeger <[log in to unmask]>

Mon, 14 Apr 2003 17:05:49 -0400

39 lines

Re: In response to "niether a question or a response"

Steve Thomas <[log in to unmask]>

Mon, 14 Apr 2003 14:28:48 -0700

83 lines

New Thread

Info

Info

kon akbar <[log in to unmask]>

Sat, 12 Apr 2003 16:43:32 -0400

78 lines

Re: Info

Steve Gregory <[log in to unmask]>

Sat, 12 Apr 2003 17:04:05 EDT

110 lines

Re: Info

Brian Ellis <[log in to unmask]>

Sun, 13 Apr 2003 10:08:05 +0300

65 lines

Re: Info

Allen T. Maddox <[log in to unmask]>

Mon, 14 Apr 2003 09:36:56 -0400

186 lines

Re: Info

Kris Keating <[log in to unmask]>

Mon, 14 Apr 2003 15:09:36 -0400

154 lines

Re: Info

Alcorn, Brent <[log in to unmask]>

Mon, 14 Apr 2003 15:17:33 -0400

206 lines

Re: Info

Steve Thomas <[log in to unmask]>

Mon, 14 Apr 2003 12:53:46 -0700

360 lines

Re: Info

Bill Decray <[log in to unmask]>

Mon, 14 Apr 2003 16:22:07 -0400

169 lines

Re: Info

Grabski III, John R. <[log in to unmask]>

Mon, 14 Apr 2003 16:32:57 -0400

202 lines

Re: Info

Randy Bock Sr. <[log in to unmask]>

Mon, 14 Apr 2003 16:57:03 -0400

234 lines

Re: Info

Cyker, Howard A (Howie) <[log in to unmask]>

Mon, 14 Apr 2003 17:14:21 -0400

240 lines

Re: Info

Barry Gallegos <[log in to unmask]>

Tue, 15 Apr 2003 06:53:09 -0600

256 lines

Re: Info

Roland Jaquet <[log in to unmask]>

Tue, 15 Apr 2003 16:30:37 +0200

732 lines

Re: Info

d. terstegge <[log in to unmask]>

Tue, 15 Apr 2003 16:55:25 +0200

380 lines

New Thread

Intermittent solder mask problems, again.

Intermittent solder mask problems, again.

Charlie Pitarys <[log in to unmask]>

Wed, 30 Apr 2003 09:49:58 -0400

132 lines

Re: Intermittent solder mask problems, again.

Franklin D Asbell <[log in to unmask]>

Wed, 30 Apr 2003 10:52:52 -0500

250 lines

Re: Intermittent solder mask problems, again.

Franklin D Asbell <[log in to unmask]>

Wed, 30 Apr 2003 10:57:07 -0500

76 lines

Re: Intermittent solder mask problems, again.

Barmuta, Mike <[log in to unmask]>

Wed, 30 Apr 2003 09:36:59 -0700

120 lines

Re: Intermittent solder mask problems, again.

Steve Gregory <[log in to unmask]>

Wed, 30 Apr 2003 13:58:26 EDT

186 lines

Re: Intermittent solder mask problems, again.

Steve MacDonald <[log in to unmask]>

Wed, 30 Apr 2003 14:09:12 -0400

138 lines

New Thread

Ionograph 500m

Ionograph 500m

Charles Caswell <[log in to unmask]>

Fri, 18 Apr 2003 09:37:39 -0500

76 lines

New Thread

IPC certified training programs

IPC certified training programs

Franklin D Asbell <[log in to unmask]>

Wed, 9 Apr 2003 14:43:56 -0500

31 lines

Re: IPC certified training programs

Kathy Kuhlow <[log in to unmask]>

Wed, 9 Apr 2003 14:49:17 -0500

81 lines

Re: IPC certified training programs

Randy Bock Sr. <[log in to unmask]>

Wed, 9 Apr 2003 16:03:36 -0400

64 lines

Re: IPC certified training programs

Tom Parkinson - Quality System Manager - WinTronics, Inc. <[log in to unmask]>

Wed, 9 Apr 2003 16:10:33 -0400

78 lines

Re: IPC certified training programs

Dick Pond <[log in to unmask]>

Thu, 10 Apr 2003 12:36:15 -0400

47 lines

Re: IPC certified training programs

[log in to unmask]

Thu, 24 Apr 2003 00:54:53 +0800

80 lines

Re: IPC certified training programs

Randy Bock Sr. <[log in to unmask]>

Wed, 23 Apr 2003 14:54:38 -0400

117 lines

Re: IPC certified training programs

Leo Lambert <[log in to unmask]>

Wed, 23 Apr 2003 15:39:04 -0100

112 lines

New Thread

IPC to Develop Handbook on Materials Declarations

IPC to Develop Handbook on Materials Declarations

Keach Sasamori <[log in to unmask]>

Thu, 10 Apr 2003 10:40:29 -0500

54 lines

IPC to Develop Handbook on Materials Declarations

Jack Crawford <[log in to unmask]>

Thu, 10 Apr 2003 13:19:23 -0500

64 lines

Re: IPC to Develop Handbook on Materials Declarations

Hal Winslow <[log in to unmask]>

Thu, 10 Apr 2003 14:32:32 -0400

88 lines

New Thread

IPC/HKPCA call for participation 2003 International Printed Circuit & Electronics Assembly Fair

IPC/HKPCA call for participation 2003 International Printed Circuit & Electronics Assembly Fair

Jack Crawford <[log in to unmask]>

Wed, 30 Apr 2003 12:50:28 -0500

71 lines

New Thread

ISO and Board Shop Audits

ISO and Board Shop Audits

Franklin D Asbell <[log in to unmask]>

Fri, 4 Apr 2003 09:12:07 -0600

64 lines

Re: ISO and Board Shop Audits

Randy Bock Sr. <[log in to unmask]>

Fri, 4 Apr 2003 10:26:18 -0500

112 lines

New Thread

Jewel cases for Texas Instrument part...

Jewel cases for Texas Instrument part...

Steve Gregory <[log in to unmask]>

Thu, 17 Apr 2003 10:30:52 EDT

81 lines

Re: Jewel cases for Texas Instrument part...

d. terstegge <[log in to unmask]>

Thu, 17 Apr 2003 16:49:21 +0200

78 lines

Re: Jewel cases for Texas Instrument part...

Ed Popielarski <[log in to unmask]>

Fri, 18 Apr 2003 06:47:35 -0700

96 lines

New Thread

Leadtime

Leadtime

d. terstegge <[log in to unmask]>

Mon, 28 Apr 2003 18:21:19 +0200

41 lines

Re: Leadtime

Zweigart, Siegmund <[log in to unmask]>

Mon, 28 Apr 2003 18:27:15 +0200

67 lines

Re: Leadtime

Crepeau, Phil <[log in to unmask]>

Mon, 28 Apr 2003 09:32:44 -0700

73 lines

Re: Leadtime

Dave Chapman <[log in to unmask]>

Mon, 28 Apr 2003 11:32:23 -0500

92 lines

Re: Leadtime

Zweigart, Siegmund <[log in to unmask]>

Mon, 28 Apr 2003 18:36:36 +0200

104 lines

Re: Leadtime

Dave Chapman <[log in to unmask]>

Mon, 28 Apr 2003 11:41:26 -0500

128 lines

Re: Leadtime

Russ Steiner <[log in to unmask]>

Mon, 28 Apr 2003 12:47:15 -0400

95 lines

Re: Leadtime

Steve MacDonald <[log in to unmask]>

Mon, 28 Apr 2003 13:14:58 -0400

73 lines

Re: Leadtime

[log in to unmask]

Tue, 29 Apr 2003 08:43:51 +0800

95 lines

Re: Leadtime

Ofer Cohen <[log in to unmask]>

Tue, 29 Apr 2003 08:44:15 +0200

70 lines

New Thread

LIFE/NO OF INSERTIONS FOR ETP PROBE OF COPPER THICKNESS MEASURING EQPT-CMI-MODEL XRF-TRP-1A/S

LIFE/NO OF INSERTIONS FOR ETP PROBE OF COPPER THICKNESS MEASURING EQPT-CMI-MODEL XRF-TRP-1A/S

[log in to unmask]

Wed, 9 Apr 2003 15:56:44 +0530

80 lines

New Thread

Listserv etiquette

Listserv etiquette

Keach Sasamori <[log in to unmask]>

Wed, 23 Apr 2003 10:26:59 -0500

88 lines

New Thread

MARKING ON PTFE

MARKING ON PTFE

Marsico, James <[log in to unmask]>

Mon, 7 Apr 2003 14:42:25 -0400

33 lines

Re: MARKING ON PTFE

Morse, Carrie <[log in to unmask]>

Mon, 7 Apr 2003 14:50:35 -0400

62 lines

Re: MARKING ON PTFE

Mcmaster, Michael <[log in to unmask]>

Mon, 7 Apr 2003 12:13:04 -0700

252 lines

New Thread

MIL SPECS.

MIL SPECS.

Barry Gallegos <[log in to unmask]>

Thu, 24 Apr 2003 12:24:11 -0600

37 lines

Re: MIL SPECS.

Collins Graham <[log in to unmask]>

Thu, 24 Apr 2003 14:26:25 -0400

70 lines

Re: MIL SPECS.

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 13:36:59 -0500

68 lines

Re: MIL SPECS.

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 13:45:17 -0500

24 lines

Re: MIL SPECS.

Kathy Kuhlow <[log in to unmask]>

Thu, 24 Apr 2003 13:39:48 -0500

59 lines

Re: MIL SPECS.

Barry Gallegos <[log in to unmask]>

Thu, 24 Apr 2003 12:51:46 -0600

94 lines

Re: MIL SPECS.

Barry Gallegos <[log in to unmask]>

Thu, 24 Apr 2003 12:52:05 -0600

50 lines

Re: MIL SPECS.

Barry Gallegos <[log in to unmask]>

Thu, 24 Apr 2003 12:53:04 -0600

92 lines

Re: MIL SPECS.

Lee Whiteman <[log in to unmask]>

Thu, 24 Apr 2003 15:05:36 -0400

79 lines

Re: MIL SPECS.

Dave Dixon <[log in to unmask]>

Thu, 24 Apr 2003 15:04:08 -0500

95 lines

New Thread

Minimum component spacing

Minimum component spacing

Phil Rothbauer <[log in to unmask]>

Wed, 16 Apr 2003 10:02:28 -0500

36 lines

Re: Minimum component spacing

Alcorn, Brent <[log in to unmask]>

Wed, 16 Apr 2003 11:33:50 -0400

72 lines

Re: Minimum component spacing

Charles Caswell <[log in to unmask]>

Wed, 16 Apr 2003 10:48:00 -0500

75 lines

Re: Minimum component spacing

Linda Langley <[log in to unmask]>

Wed, 16 Apr 2003 12:24:35 -0400

66 lines

Re: Minimum component spacing

Roger Stoops <[log in to unmask]>

Wed, 16 Apr 2003 11:48:18 -0400

116 lines

New Thread

modified gerber file

modified gerber file

Rama Vemulapalli <[log in to unmask]>

Wed, 9 Apr 2003 10:47:29 -0700

51 lines

Re: modified gerber file

Daan Terstegge <[log in to unmask]>

Wed, 9 Apr 2003 20:04:28 +0200

66 lines

Re: modified gerber file

William Sullivan <[log in to unmask]>

Wed, 9 Apr 2003 11:07:09 -0700

105 lines

Re: modified gerber file

Jeff Seeger <[log in to unmask]>

Wed, 9 Apr 2003 14:07:50 -0400

41 lines

New Thread

Molex 3BF, "the ancient"

Molex 3BF, "the ancient"

Grabski III, John R. <[log in to unmask]>

Wed, 30 Apr 2003 08:40:24 -0400

55 lines

New Thread

Neither a query, nor a response... (NON-TECHNICAL CONTEN T!)

Re: Neither a query, nor a response... (NON-TECHNICAL CONTEN T!)

Grabski III, John R. <[log in to unmask]>

Tue, 15 Apr 2003 13:24:28 -0400

114 lines

New Thread

Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

Tim Reeves <[log in to unmask]>

Tue, 15 Apr 2003 10:09:22 -0700

74 lines

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

Steve MacDonald <[log in to unmask]>

Tue, 15 Apr 2003 14:02:32 -0400

111 lines

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

David Douthit <[log in to unmask]>

Tue, 15 Apr 2003 18:42:20 -0700

88 lines

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

[log in to unmask]

Wed, 16 Apr 2003 10:29:21 +0800

164 lines

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

Eric Dawson <[log in to unmask]>

Wed, 16 Apr 2003 07:46:29 +0100

157 lines

Re: Neither a query, nor a response... (NON-TECHNICAL CONTENT!)

David Ricketts <[log in to unmask]>

Wed, 16 Apr 2003 12:42:25 -0700

70 lines

New Thread

Neither a question, or a response...

Re: Neither a question, or a response...

Dave Chapman <[log in to unmask]>

Tue, 15 Apr 2003 06:09:10 -0500

53 lines

Re: Neither a question, or a response...

Ofer Cohen <[log in to unmask]>

Tue, 15 Apr 2003 14:28:21 +0200

87 lines

Re: Neither a question, or a response...

Sasha Miladinovic <[log in to unmask]>

Tue, 15 Apr 2003 13:27:26 +0200

249 lines

Re: Neither a question, or a response...

Collins Graham <[log in to unmask]>

Tue, 15 Apr 2003 07:32:48 -0400

110 lines

Re: Neither a question, or a response...

d. terstegge <[log in to unmask]>

Tue, 15 Apr 2003 13:59:36 +0200

100 lines

Re: Neither a question, or a response...

Barbara Burcham <[log in to unmask]>

Tue, 15 Apr 2003 09:06:16 -0500

93 lines

Re: Neither a question, or a response...

Dave Chapman <[log in to unmask]>

Tue, 15 Apr 2003 10:14:01 -0500

47 lines

Re: Neither a question, or a response...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 15 Apr 2003 11:39:37 -0400

84 lines

Re: Neither a question, or a response...

[log in to unmask]

Wed, 16 Apr 2003 08:22:16 +0800

166 lines

Re: Neither a question, or a response...

Dave Chapman <[log in to unmask]>

Wed, 16 Apr 2003 11:30:44 -0500

133 lines

New Thread

New Topic: Why are most solder mask requirements, for GR EEN mask???

Re: New Topic: Why are most solder mask requirements, for GR EEN mask???

Genny Gibbard <[log in to unmask]>

Mon, 7 Apr 2003 13:17:10 -0600

38 lines

Re: New Topic: Why are most solder mask requirements, for GR EEN mask???

Bill Christoffel <[log in to unmask]>

Mon, 7 Apr 2003 14:18:15 -0500

71 lines

Re: New Topic: Why are most solder mask requirements, for GR EEN mask???

Franklin D Asbell <[log in to unmask]>

Mon, 7 Apr 2003 16:23:12 -0500

74 lines

Re: New Topic: Why are most solder mask requirements, for GR EEN mask???

Tim Reeves <[log in to unmask]>

Tue, 8 Apr 2003 09:56:21 -0700

81 lines

Re: New Topic: Why are most solder mask requirements, for GR EEN mask???

joyce <[log in to unmask]>

Wed, 9 Apr 2003 08:41:25 -0400

115 lines

New Thread

New Topic: Why are most solder mask requirements, for GREEN mask???

New Topic: Why are most solder mask requirements, for GREEN mask???

Franklin D Asbell <[log in to unmask]>

Mon, 7 Apr 2003 13:17:51 -0500

26 lines

Re: New Topic: Why are most solder mask requirements, for GREEN mask???

[log in to unmask]

Mon, 7 Apr 2003 13:20:54 -0500

68 lines

Re: New Topic: Why are most solder mask requirements, for GREEN mask???

joyce <[log in to unmask]>

Mon, 7 Apr 2003 14:23:13 -0400

54 lines

Re: New Topic: Why are most solder mask requirements, for GREEN mask???

Joe Fjelstad <[log in to unmask]>

Mon, 7 Apr 2003 14:33:46 EDT

56 lines

Re: New Topic: Why are most solder mask requirements, for GREEN mask???

Dan R. Johnson <[log in to unmask]>

Mon, 7 Apr 2003 11:41:19 -0700

61 lines

New Thread

New Topic: Why are most solder mask requirements, for GREENmask???

Re: New Topic: Why are most solder mask requirements, for GREENmask???

Barmuta, Mike <[log in to unmask]>

Mon, 7 Apr 2003 14:15:25 -0700

132 lines

Re: New Topic: Why are most solder mask requirements, for GREENmask???

Smith, Russell (US LA) <[log in to unmask]>

Mon, 7 Apr 2003 14:32:13 -0700

191 lines

New Thread

New Topic: Why are most solder mask requirements,for GREEN mask???

Re: New Topic: Why are most solder mask requirements,for GREEN mask???

Blair K. Hogg <[log in to unmask]>

Mon, 7 Apr 2003 15:04:42 -0400

47 lines

New Thread

New Topic: Why are most solder mask requirements,for GREENm...

Re: New Topic: Why are most solder mask requirements,for GREENm...

Dennis Fritz <[log in to unmask]>

Tue, 8 Apr 2003 10:57:48 EDT

36 lines

New Thread

New Topic: Why are most solder mask requirements,for GREENmas...

Re: New Topic: Why are most solder mask requirements,for GREENmas...

Dennis Fritz <[log in to unmask]>

Mon, 7 Apr 2003 17:00:01 EDT

40 lines

Re: New Topic: Why are most solder mask requirements,for GREENmas...

Smith, Russell (US LA) <[log in to unmask]>

Mon, 7 Apr 2003 14:50:37 -0700

104 lines

New Thread

New Topic: Why are most solder mask requirements,for GREENmask???

Re: New Topic: Why are most solder mask requirements,for GREENmask???

Kathy Kuhlow <[log in to unmask]>

Mon, 7 Apr 2003 14:11:53 -0500

68 lines

Re: New Topic: Why are most solder mask requirements,for GREENmask???

Smith, Russell (US LA) <[log in to unmask]>

Mon, 7 Apr 2003 13:07:54 -0700

89 lines

Re: New Topic: Why are most solder mask requirements,for GREENmask???

Franklin D Asbell <[log in to unmask]>

Mon, 7 Apr 2003 16:26:23 -0500

118 lines

Re: New Topic: Why are most solder mask requirements,for GREENmask???

Smith, Russell (US LA) <[log in to unmask]>

Mon, 7 Apr 2003 14:34:00 -0700

173 lines

Re: New Topic: Why are most solder mask requirements,for GREENmask???

Jack C. Olson <[log in to unmask]>

Tue, 8 Apr 2003 10:59:04 -0500

39 lines

New Thread

New Topic: Why GREEN and halide minimal.

Re: New Topic: Why GREEN and halide minimal.

Smith, Russell (US LA) <[log in to unmask]>

Tue, 8 Apr 2003 09:24:39 -0700

78 lines

Re: New Topic: Why GREEN and halide minimal.

Brian Ellis <[log in to unmask]>

Wed, 9 Apr 2003 09:17:18 +0300

104 lines

New Thread

Niether a question, or a response...

Niether a question, or a response...

Franklin D Asbell <[log in to unmask]>

Mon, 14 Apr 2003 15:58:23 -0500

25 lines

Re: Niether a question, or a response...

Jason W. Gregory <[log in to unmask]>

Mon, 14 Apr 2003 15:59:09 -0500

66 lines

Re: Niether a question, or a response...

Franklin D Asbell <[log in to unmask]>

Mon, 14 Apr 2003 16:42:28 -0500

92 lines

Re: Niether a question, or a response...

[log in to unmask]

Tue, 15 Apr 2003 12:36:34 +0800

115 lines

New Thread

NPI (New Product Introductions)

NPI (New Product Introductions)

Barry Gallegos <[log in to unmask]>

Thu, 3 Apr 2003 07:20:58 -0700

35 lines

Re: NPI (New Product Introductions)

Bill Decray <[log in to unmask]>

Thu, 3 Apr 2003 09:23:22 -0500

77 lines

Re: NPI (New Product Introductions)

Daan Terstegge <[log in to unmask]>

Thu, 3 Apr 2003 20:01:53 +0200

68 lines

Re: NPI (New Product Introductions)

Dave Chapman <[log in to unmask]>

Thu, 3 Apr 2003 12:30:03 -0600

90 lines

Re: NPI (New Product Introductions)

Bill Decray <[log in to unmask]>

Thu, 3 Apr 2003 13:39:46 -0500

131 lines

Re: NPI (New Product Introductions)

Randy Bock Sr. <[log in to unmask]>

Thu, 3 Apr 2003 14:53:19 -0500

119 lines

Re: NPI (New Product Introductions)

Dieselberg, Ron <[log in to unmask]>

Thu, 3 Apr 2003 14:22:02 -0500

134 lines

Re: NPI (New Product Introductions)

Randy Bock Sr. <[log in to unmask]>

Thu, 3 Apr 2003 16:29:14 -0500

152 lines

Re: NPI (New Product Introductions)

Dan R. Johnson <[log in to unmask]>

Thu, 3 Apr 2003 13:32:23 -0800

25 lines

Re: NPI (New Product Introductions)

jinhong <[log in to unmask]>

Fri, 4 Apr 2003 08:02:56 +0800

30 lines

Re: NPI (New Product Introductions)

[log in to unmask]

Fri, 4 Apr 2003 18:36:57 +0800

25 lines

New Thread

NTC - Dwindling members - Just My Opinion...

Re: NTC - Dwindling members - Just My Opinion...

Phil Culpovich <[log in to unmask]>

Tue, 15 Apr 2003 13:19:28 -0700

192 lines

New Thread

NTC - personnel whereabouts

NTC - personnel whereabouts

Dougal Stewart <[log in to unmask]>

Fri, 25 Apr 2003 09:30:27 +0100

73 lines

New Thread

NTC? Hazards of chemicals, etc.

NTC? Hazards of chemicals, etc.

Rudy Sedlak <[log in to unmask]>

Tue, 29 Apr 2003 14:13:04 EDT

33 lines

New Thread

Omega Testing AND No-Clean

Omega Testing AND No-Clean

Morse, Carrie <[log in to unmask]>

Tue, 22 Apr 2003 17:59:58 -0400

42 lines

Re: Omega Testing AND No-Clean

Brian Ellis <[log in to unmask]>

Wed, 23 Apr 2003 10:46:02 +0300

72 lines

Re: Omega Testing AND No-Clean

[log in to unmask]

Wed, 23 Apr 2003 08:23:04 -0500

130 lines

Re: Omega Testing AND No-Clean

Morse, Carrie <[log in to unmask]>

Wed, 23 Apr 2003 09:42:03 -0400

210 lines

Re: Omega Testing AND No-Clean

Carroll, George <[log in to unmask]>

Wed, 23 Apr 2003 10:02:39 -0400

92 lines

Re: Omega Testing AND No-Clean

[log in to unmask]

Wed, 23 Apr 2003 09:12:32 -0500

83 lines

Re: Omega Testing AND No-Clean

Morse, Carrie <[log in to unmask]>

Wed, 23 Apr 2003 10:38:08 -0400

126 lines

Re: Omega Testing AND No-Clean

Carroll, George <[log in to unmask]>

Wed, 23 Apr 2003 11:08:28 -0400

39 lines

Re: Omega Testing AND No-Clean

Brian Ellis <[log in to unmask]>

Wed, 23 Apr 2003 18:53:37 +0300

61 lines

Re: Omega Testing AND No-Clean

Morse, Carrie <[log in to unmask]>

Wed, 23 Apr 2003 12:16:01 -0400

108 lines

Re: Omega Testing AND No-Clean

Daan Terstegge <[log in to unmask]>

Wed, 23 Apr 2003 20:12:15 +0200

30 lines

New Thread

oxygen index

oxygen index

Mark Hargreaves <[log in to unmask]>

Mon, 28 Apr 2003 15:56:41 -0400

30 lines

Re: oxygen index

Franklin D Asbell <[log in to unmask]>

Mon, 28 Apr 2003 15:17:16 -0500

26 lines

Re: oxygen index

Donald Durett <[log in to unmask]>

Mon, 28 Apr 2003 16:31:47 -0400

64 lines

Re: oxygen index

Steve MacDonald <[log in to unmask]>

Tue, 29 Apr 2003 09:46:22 -0400

94 lines

Re: oxygen index

joyce <[log in to unmask]>

Wed, 30 Apr 2003 08:32:26 -0400

222 lines

New Thread

Ozone usage limitations

Re: Ozone usage limitations

Tim Reeves <[log in to unmask]>

Tue, 1 Apr 2003 09:49:57 -0800

278 lines

New Thread

Packaging Standards

Packaging Standards

Carlr Ray <[log in to unmask]>

Wed, 9 Apr 2003 14:24:51 -0500

41 lines

New Thread

Paste / flux separation

Paste / flux separation

Chris Murphy <[log in to unmask]>

Mon, 7 Apr 2003 17:09:07 +1200

57 lines

New Thread

PCB Material Question

PCB Material Question

Carl VanWormer <[log in to unmask]>

Fri, 25 Apr 2003 07:08:01 -0700

38 lines

Re: PCB Material Question

[log in to unmask]

Fri, 25 Apr 2003 11:01:35 EDT

56 lines

Re: PCB Material Question

Carl VanWormer <[log in to unmask]>

Fri, 25 Apr 2003 08:04:52 -0700

155 lines

Re: PCB Material Question

Randy Bock Sr. <[log in to unmask]>

Fri, 25 Apr 2003 11:13:04 -0400

66 lines

Re: PCB Material Question

Franklin D Asbell <[log in to unmask]>

Fri, 25 Apr 2003 10:16:50 -0500

70 lines

Re: PCB Material Question

[log in to unmask]

Fri, 25 Apr 2003 11:12:30 EDT

56 lines

Re: PCB Material Question

Brian Ellis <[log in to unmask]>

Fri, 25 Apr 2003 18:19:27 +0300

62 lines

Re: PCB Material Question

Zweigart, Siegmund <[log in to unmask]>

Fri, 25 Apr 2003 17:18:42 +0200

103 lines

Re: PCB Material Question

[log in to unmask]

Fri, 25 Apr 2003 10:39:36 -0500

72 lines

Re: PCB Material Question

Geoff Layhe <[log in to unmask]>

Mon, 28 Apr 2003 17:12:16 +0100

74 lines

Re: PCB Material Question

Bernard Kessler <[log in to unmask]>

Mon, 28 Apr 2003 09:14:50 -0700

104 lines

Re: PCB Material Question

[log in to unmask]

Tue, 29 Apr 2003 08:22:01 +0800

123 lines

Re: PCB Material Question

Quality <[log in to unmask]>

Wed, 30 Apr 2003 12:09:47 -0400

97 lines

New Thread

Pizza Cutter

Pizza Cutter

rgrant <[log in to unmask]>

Tue, 22 Apr 2003 17:09:50 -0600

30 lines

Re: Pizza Cutter

Roger Cook <[log in to unmask]>

Tue, 22 Apr 2003 16:15:11 -0700

54 lines

New Thread

Please keep it up Steve....

Please keep it up Steve....

Rudy Sedlak <[log in to unmask]>

Tue, 15 Apr 2003 00:31:14 EDT

58 lines

New Thread

Power Boards

Power Boards

Ken Hafften <[log in to unmask]>

Wed, 30 Apr 2003 08:33:00 -0500

33 lines

Re: Power Boards

Ted Kong <[log in to unmask]>

Wed, 30 Apr 2003 13:42:01 -0700

72 lines

Re: Power Boards

David Douthit <[log in to unmask]>

Wed, 30 Apr 2003 17:05:53 -0700

56 lines

New Thread

problem with gold pads of the pcb

problem with gold pads of the pcb

Prashant Chopra <[log in to unmask]>

Tue, 22 Apr 2003 01:59:02 -0500

32 lines

Re: problem with gold pads of the pcb

Sasha Miladinovic <[log in to unmask]>

Tue, 22 Apr 2003 09:51:28 +0200

201 lines

Re: problem with gold pads of the pcb

Grant Emandien <[log in to unmask]>

Tue, 22 Apr 2003 11:50:55 +0200

84 lines

Re: problem with gold pads of the pcb

joyce <[log in to unmask]>

Tue, 22 Apr 2003 08:40:44 -0400

64 lines

Re: problem with gold pads of the pcb

Cyker, Howard A (Howie) <[log in to unmask]>

Tue, 22 Apr 2003 08:54:11 -0400

79 lines

Re: problem with gold pads of the pcb

Kathy Kuhlow <[log in to unmask]>

Tue, 22 Apr 2003 08:22:59 -0500

62 lines

Re: problem with gold pads of the pcb

Mike Fenner <[log in to unmask]>

Thu, 24 Apr 2003 09:20:10 +0100

136 lines

New Thread

process capability (Cpk)

process capability (Cpk)

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Thu, 3 Apr 2003 13:25:43 -0500

126 lines

New Thread

Public review of Nordic ecolabelling criteria for Printed wiring

Public review of Nordic ecolabelling criteria for Printed wiring

Keach Sasamori <[log in to unmask]>

Mon, 21 Apr 2003 11:05:31 -0500

765 lines

New Thread

PWB shop audit/assessment checklist

PWB shop audit/assessment checklist

J. Brewer <[log in to unmask]>

Mon, 14 Apr 2003 14:57:48 -0400

30 lines

Re: PWB shop audit/assessment checklist

Randy Bock Sr. <[log in to unmask]>

Mon, 14 Apr 2003 15:21:35 -0400

76 lines

Re: PWB shop audit/assessment checklist

Franklin D Asbell <[log in to unmask]>

Mon, 14 Apr 2003 14:45:25 -0500

58 lines

Re: PWB shop audit/assessment checklist

Franklin D Asbell <[log in to unmask]>

Mon, 14 Apr 2003 14:49:27 -0500

63 lines

Re: PWB shop audit/assessment checklist

Roland Jaquet <[log in to unmask]>

Tue, 15 Apr 2003 08:41:40 +0200

137 lines

New Thread

Raw card solderability

Raw card solderability

Bill Page <[log in to unmask]>

Fri, 25 Apr 2003 15:48:53 -0500

40 lines

Re: Raw card solderability

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Fri, 25 Apr 2003 17:15:21 -0400

86 lines

Re: Raw card solderability

Franklin D Asbell <[log in to unmask]>

Fri, 25 Apr 2003 16:34:41 -0500

45 lines

Re: Raw card solderability

Dave Hillman <[log in to unmask]>

Mon, 28 Apr 2003 09:16:32 -0500

95 lines

Re: Raw card solderability

joyce <[log in to unmask]>

Mon, 28 Apr 2003 10:47:34 -0400

128 lines

Re: Raw card solderability

Dave Hillman <[log in to unmask]>

Mon, 28 Apr 2003 11:17:54 -0500

135 lines

New Thread

Re: [TN] Flux activity _ Säurezahl

Re: Re: [TN] Flux activity _ Säurezahl

Brian Ellis <[log in to unmask]>

Tue, 1 Apr 2003 23:34:18 +0300

61 lines

New Thread

Request for help ESD Simulator.

Re: Request for help ESD Simulator.

Randy Bock Sr. <[log in to unmask]>

Wed, 30 Apr 2003 12:45:51 -0400

81 lines

Re: Request for help ESD Simulator.

Jensen, Juanita <[log in to unmask]>

Wed, 30 Apr 2003 10:30:16 -0700

122 lines

New Thread

Saponifiers and no-residue/no-clean fluxes

Re: Saponifiers and no-residue/no-clean fluxes

Charlie Pitarys <[log in to unmask]>

Wed, 16 Apr 2003 09:39:20 -0400

221 lines

Re: Saponifiers and no-residue/no-clean fluxes

Franklin D Asbell <[log in to unmask]>

Wed, 16 Apr 2003 09:29:25 -0500

327 lines

Re: Saponifiers and no-residue/no-clean fluxes

Barmuta, Mike <[log in to unmask]>

Wed, 16 Apr 2003 09:35:57 -0700

195 lines

Re: Saponifiers and no-residue/no-clean fluxes

Mike Fenner <[log in to unmask]>

Thu, 17 Apr 2003 16:51:59 +0100

247 lines

New Thread

Sapponifiers and no-residue/no-clean fluxes

Sapponifiers and no-residue/no-clean fluxes

Franklin D Asbell <[log in to unmask]>

Thu, 10 Apr 2003 16:39:57 -0500

26 lines

Re: Sapponifiers and no-residue/no-clean fluxes

Rudy Sedlak <[log in to unmask]>

Thu, 10 Apr 2003 18:16:52 EDT

42 lines

Re: Sapponifiers and no-residue/no-clean fluxes

[log in to unmask]

Fri, 11 Apr 2003 08:05:07 -0500

31 lines

Re: Sapponifiers and no-residue/no-clean fluxes

joyce <[log in to unmask]>

Fri, 11 Apr 2003 09:14:41 -0400

63 lines

Re: Sapponifiers and no-residue/no-clean fluxes

Franklin D Asbell <[log in to unmask]>

Fri, 11 Apr 2003 08:41:01 -0500

59 lines

Re: Sapponifiers and no-residue/no-clean fluxes

Grabski III, John R. <[log in to unmask]>

Fri, 11 Apr 2003 09:36:02 -0400

80 lines

Re: Sapponifiers and no-residue/no-clean fluxes

Rudy Sedlak <[log in to unmask]>

Fri, 11 Apr 2003 09:47:38 EDT

65 lines

Re: Sapponifiers and no-residue/no-clean fluxes

Steve Gregory <[log in to unmask]>

Fri, 11 Apr 2003 11:07:51 EDT

103 lines

New Thread

Seeking a Quad technician

Seeking a Quad technician

Ed Popielarski <[log in to unmask]>

Fri, 25 Apr 2003 11:04:53 -0700

99 lines

Re: Seeking a Quad technician

Dehoyos, Ramon <[log in to unmask]>

Fri, 25 Apr 2003 11:44:17 -0700

70 lines

Re: Seeking a Quad technician

Debbie Goodwin <[log in to unmask]>

Fri, 25 Apr 2003 12:25:53 -0700

207 lines

New Thread

selective wave solder pallets

selective wave solder pallets

Tenison Stone <[log in to unmask]>

Wed, 9 Apr 2003 13:33:54 -0500

67 lines

Re: selective wave solder pallets

Mcmaster, Michael <[log in to unmask]>

Wed, 9 Apr 2003 12:08:48 -0700

197 lines

Re: selective wave solder pallets

Ed Popielarski <[log in to unmask]>

Thu, 10 Apr 2003 07:37:57 -0700

108 lines

Re: selective wave solder pallets

Victor Hernandez <[log in to unmask]>

Thu, 10 Apr 2003 10:44:24 -0500

165 lines

Re: selective wave solder pallets

Ed Popielarski <[log in to unmask]>

Thu, 10 Apr 2003 09:49:39 -0700

261 lines

Re: selective wave solder pallets

[log in to unmask]

Thu, 10 Apr 2003 14:45:13 EDT

84 lines

Re: selective wave solder pallets

Tenison Stone <[log in to unmask]>

Thu, 10 Apr 2003 14:00:22 -0500

57 lines

New Thread

selective wave solder pallets(1)

Re: selective wave solder pallets(1)

Ed Popielarski <[log in to unmask]>

Fri, 11 Apr 2003 07:37:06 -0700

460 lines

New Thread

Silver Fill Plugged Vias / Gold Body

Re: Silver Fill Plugged Vias / Gold Body

Hoyt, Kelly <[log in to unmask]>

Tue, 1 Apr 2003 11:11:43 -0500

78 lines

New Thread

Single Lead IPC solder joint calculator

Single Lead IPC solder joint calculator

Carlr Ray <[log in to unmask]>

Fri, 11 Apr 2003 08:48:07 -0500

30 lines

Re: Single Lead IPC solder joint calculator

Mel Parrish <[log in to unmask]>

Fri, 11 Apr 2003 09:26:50 -0500

69 lines

Re: Single Lead IPC solder joint calculator

Carlr Ray <[log in to unmask]>

Fri, 11 Apr 2003 11:51:54 -0500

93 lines

New Thread

SMT part description standard

SMT part description standard

Phil Nutting <[log in to unmask]>

Tue, 1 Apr 2003 12:30:49 -0500

46 lines

Re: SMT part description standard

Taylor, Royce <[log in to unmask]>

Tue, 1 Apr 2003 11:51:56 -0600

92 lines

New Thread

SMT utilization

SMT utilization

Dave Chapman <[log in to unmask]>

Fri, 18 Apr 2003 15:26:17 -0500

38 lines

Re: SMT utilization

Hal Winslow <[log in to unmask]>

Fri, 18 Apr 2003 16:47:40 -0400

62 lines

Re: SMT utilization

Dave Chapman <[log in to unmask]>

Mon, 21 Apr 2003 05:55:32 -0500

85 lines

Re: SMT utilization

Jowan Iven <[log in to unmask]>

Tue, 22 Apr 2003 08:43:31 +0200

91 lines

New Thread

SNEC Meeting

SNEC Meeting

Gary Ferrari <[log in to unmask]>

Mon, 7 Apr 2003 13:39:24 EDT

98 lines

New Thread

Solder Balls

Solder Balls

Dehoyos, Ramon <[log in to unmask]>

Fri, 11 Apr 2003 08:46:33 -0700

39 lines

New Thread

SOLDER/EPOXY REACTION

SOLDER/EPOXY REACTION

Dan R. Johnson <[log in to unmask]>

Wed, 23 Apr 2003 13:04:25 -0700

28 lines

Re: SOLDER/EPOXY REACTION

Glass, Arthur G <[log in to unmask]>

Wed, 23 Apr 2003 16:34:59 -0400

55 lines

Re: SOLDER/EPOXY REACTION

Glenn Pelkey <[log in to unmask]>

Wed, 23 Apr 2003 15:49:53 -0700

44 lines

Re: SOLDER/EPOXY REACTION

Bill Christoffel <[log in to unmask]>

Thu, 24 Apr 2003 08:24:37 -0500

66 lines

New Thread

Soldermask inspection question

Soldermask inspection question

Mark Hargreaves <[log in to unmask]>

Wed, 23 Apr 2003 15:47:34 -0400

28 lines

Re: Soldermask inspection question

Franklin D Asbell <[log in to unmask]>

Wed, 23 Apr 2003 15:02:40 -0500

62 lines

Re: Soldermask inspection question

Tim Reeves <[log in to unmask]>

Thu, 24 Apr 2003 11:42:38 -0700

63 lines

Re: Soldermask inspection question

Roger Stoops <[log in to unmask]>

Mon, 28 Apr 2003 09:14:25 -0500

30 lines

New Thread

Source for inspection stamps/ink

Source for inspection stamps/ink

Hal Winslow <[log in to unmask]>

Thu, 17 Apr 2003 11:12:36 -0400

39 lines

Re: Source for inspection stamps/ink

Rich Buccieri <[log in to unmask]>

Thu, 17 Apr 2003 10:50:12 -0500

63 lines

Re: Source for inspection stamps/ink

Blair K. Hogg <[log in to unmask]>

Thu, 17 Apr 2003 12:28:43 -0400

201 lines

Re: Source for inspection stamps/ink

Charles Caswell <[log in to unmask]>

Thu, 17 Apr 2003 12:04:05 -0500

70 lines

Re: Source for inspection stamps/ink

Kathy Kuhlow <[log in to unmask]>

Thu, 17 Apr 2003 12:11:56 -0500

57 lines

Re: Source for inspection stamps/ink

Black, Paul <[log in to unmask]>

Thu, 17 Apr 2003 13:35:57 -0400

75 lines

New Thread

SRAM on bottomside

SRAM on bottomside

Jowan Iven <[log in to unmask]>

Fri, 25 Apr 2003 13:25:58 +0200

51 lines

Re: SRAM on bottomside

Eric Dawson <[log in to unmask]>

Fri, 25 Apr 2003 13:25:57 +0100

108 lines

Re: SRAM on bottomside

Jowan Iven <[log in to unmask]>

Fri, 25 Apr 2003 14:47:40 +0200

149 lines

Re: SRAM on bottomside

Cyker, Howard A (Howie) <[log in to unmask]>

Fri, 25 Apr 2003 08:57:11 -0400

192 lines

Re: SRAM on bottomside

Steve Gregory <[log in to unmask]>

Fri, 25 Apr 2003 09:28:15 EDT

120 lines

Re: SRAM on bottomside

Dave Chapman <[log in to unmask]>

Fri, 25 Apr 2003 08:40:18 -0500

183 lines

Re: SRAM on bottomside

joyce <[log in to unmask]>

Fri, 25 Apr 2003 09:42:37 -0400

240 lines

Re: SRAM on bottomside

Collins Graham <[log in to unmask]>

Fri, 25 Apr 2003 09:53:08 -0400

105 lines

New Thread

Stacked DRAM

Stacked DRAM

Dacia Super <[log in to unmask]>

Wed, 9 Apr 2003 17:11:10 -0500

116 lines

Re: Stacked DRAM

Joe Fjelstad <[log in to unmask]>

Wed, 9 Apr 2003 18:26:50 EDT

63 lines

Re: Stacked DRAM

Mark Roslawski <[log in to unmask]>

Thu, 10 Apr 2003 04:04:05 -0700

253 lines

Re: Stacked DRAM

Per Viklund <[log in to unmask]>

Thu, 10 Apr 2003 13:32:24 +0200

356 lines

New Thread

Strain Gage Test + Copper Grade

Strain Gage Test + Copper Grade

Yu, Rudolph <[log in to unmask]>

Thu, 17 Apr 2003 17:56:34 -0700

45 lines

Re: Strain Gage Test + Copper Grade

Werner Engelmaier <[log in to unmask]>

Thu, 17 Apr 2003 23:19:20 EDT

39 lines

New Thread

Sulfamate NI??

Sulfamate NI??

Russ Steiner <[log in to unmask]>

Thu, 24 Apr 2003 10:55:21 -0400

53 lines

Re: Sulfamate NI??

Barmuta, Mike <[log in to unmask]>

Thu, 24 Apr 2003 13:38:19 -0700

111 lines

New Thread

Surface Finish

Surface Finish

Ken Patel <[log in to unmask]>

Tue, 29 Apr 2003 14:26:08 -0700

28 lines

Re: Surface Finish

Franklin D Asbell <[log in to unmask]>

Tue, 29 Apr 2003 16:38:31 -0500

64 lines

Re: Surface Finish

Bev Christian <[log in to unmask]>

Tue, 29 Apr 2003 17:33:20 -0400

65 lines

Re: Surface Finish

Barmuta, Mike <[log in to unmask]>

Tue, 29 Apr 2003 15:16:20 -0700

76 lines

Re: Surface Finish

Gerard O'Brien <[log in to unmask]>

Wed, 30 Apr 2003 08:44:11 -0400

59 lines

New Thread

TechNet E-mail forum / Lifted lands / As Received sample / Root c...

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root c...

Steve Gregory <[log in to unmask]>

Thu, 10 Apr 2003 08:39:31 EDT

56 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root c...

Steve Gregory <[log in to unmask]>

Thu, 10 Apr 2003 10:01:44 EDT

133 lines

New Thread

TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Robert Coburn <[log in to unmask]>

Wed, 9 Apr 2003 14:44:00 -0400

66 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

paul reid <[log in to unmask]>

Wed, 9 Apr 2003 14:58:14 -0400

123 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Steve MacDonald <[log in to unmask]>

Wed, 9 Apr 2003 15:18:49 -0400

160 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Werner Engelmaier <[log in to unmask]>

Wed, 9 Apr 2003 23:35:38 EDT

40 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Robert Coburn <[log in to unmask]>

Thu, 10 Apr 2003 07:15:46 -0400

185 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Werner Engelmaier <[log in to unmask]>

Thu, 10 Apr 2003 12:10:12 EDT

40 lines

Re: TechNet E-mail forum / Lifted lands / As Received sample / Root causes?

Quality <[log in to unmask]>

Fri, 11 Apr 2003 12:55:35 -0400

153 lines

New Thread

Test...

Test...

Steve Gregory <[log in to unmask]>

Thu, 10 Apr 2003 13:37:36 EDT

49 lines

New Thread

This "verbage" thread - NTC

This "verbage" thread - NTC

Jason W. Gregory <[log in to unmask]>

Wed, 23 Apr 2003 16:31:44 -0500

45 lines

New Thread

Tin Anodes

Tin Anodes

Rene Lopez <[log in to unmask]>

Fri, 11 Apr 2003 09:28:26 -0700

34 lines

New Thread

Tin Stripping

Tin Stripping

Martin Goosey <[log in to unmask]>

Tue, 15 Apr 2003 08:34:04 +0100

74 lines

New Thread

Tin Whiskers

Tin Whiskers

Kane, Joseph <[log in to unmask]>

Thu, 17 Apr 2003 12:08:00 -0400

54 lines

Re: Tin Whiskers

Paul Signorelli <[log in to unmask]>

Thu, 17 Apr 2003 11:15:50 -0500

87 lines

Re: Tin Whiskers

joyce <[log in to unmask]>

Thu, 17 Apr 2003 12:20:34 -0400

98 lines

Re: Tin Whiskers

Mel Parrish <[log in to unmask]>

Thu, 17 Apr 2003 15:24:13 -0500

94 lines

Re: Tin Whiskers

Mike Fenner <[log in to unmask]>

Thu, 24 Apr 2003 09:26:07 +0100

131 lines

New Thread

Too Much No Clean

Too Much No Clean

Neda Thrash <[log in to unmask]>

Thu, 10 Apr 2003 17:07:46 -0400

24 lines

Re: Too Much No Clean

[log in to unmask]

Thu, 10 Apr 2003 16:18:09 -0500

71 lines

Re: Too Much No Clean

joyce <[log in to unmask]>

Thu, 10 Apr 2003 17:20:01 -0400

55 lines

Re: Too Much No Clean

Steve Gregory <[log in to unmask]>

Thu, 10 Apr 2003 18:23:22 EDT

126 lines

Re: Too Much No Clean

Brian Ellis <[log in to unmask]>

Fri, 11 Apr 2003 09:19:56 +0300

55 lines

Re: Too Much No Clean

d. terstegge <[log in to unmask]>

Fri, 11 Apr 2003 10:06:26 +0200

70 lines

Re: Too Much No Clean

Neda Thrash <[log in to unmask]>

Fri, 11 Apr 2003 14:38:25 -0400

23 lines

Re: Too Much No Clean

BRAD VANDERHOOF <[log in to unmask]>

Fri, 11 Apr 2003 23:49:05 -0700

100 lines

New Thread

UL Spacing requirements 1.5kV

UL Spacing requirements 1.5kV

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 15 Apr 2003 14:30:57 -0400

94 lines

Re: UL Spacing requirements 1.5kV

Hal Winslow <[log in to unmask]>

Tue, 15 Apr 2003 15:04:23 -0400

163 lines

Re: UL Spacing requirements 1.5kV

Ahne Oosterhof <[log in to unmask]>

Tue, 15 Apr 2003 12:44:32 -0700

111 lines

New Thread

Underfil with or without Encapsulate

Underfil with or without Encapsulate

Carlr Ray <[log in to unmask]>

Wed, 30 Apr 2003 09:00:47 -0500

46 lines

New Thread

USE OF CAC / SEPARATORS

USE OF CAC / SEPARATORS

John S. Grosso <[log in to unmask]>

Tue, 29 Apr 2003 08:53:20 -0500

38 lines

Re: USE OF CAC / SEPARATORS

Geoff Layhe <[log in to unmask]>

Tue, 29 Apr 2003 17:26:12 +0100

76 lines

Re: USE OF CAC / SEPARATORS

John S. Grosso <[log in to unmask]>

Tue, 29 Apr 2003 13:53:39 -0400

131 lines

New Thread

velcro straps for matrix trays?

velcro straps for matrix trays?

Collins Graham <[log in to unmask]>

Thu, 24 Apr 2003 12:58:20 -0400

56 lines

Re: velcro straps for matrix trays?

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 12:12:31 -0500

90 lines

Re: velcro straps for matrix trays?

Glass, Arthur G <[log in to unmask]>

Thu, 24 Apr 2003 13:14:13 -0400

79 lines

Re: velcro straps for matrix trays?

Crepeau, Phil <[log in to unmask]>

Thu, 24 Apr 2003 10:10:50 -0700

128 lines

Re: velcro straps for matrix trays?

Taylor, Royce <[log in to unmask]>

Thu, 24 Apr 2003 12:24:18 -0500

169 lines

Re: velcro straps for matrix trays?

[log in to unmask]

Fri, 25 Apr 2003 08:00:24 +0800

98 lines

Re: Velcro straps for matrix trays?

Eric Dawson <[log in to unmask]>

Fri, 25 Apr 2003 08:51:36 +0100

96 lines

Re: Velcro straps for matrix trays?

BRAD VANDERHOOF <[log in to unmask]>

Fri, 25 Apr 2003 01:11:44 -0700

122 lines

Re: Velcro straps for matrix trays?

Collins Graham <[log in to unmask]>

Fri, 25 Apr 2003 07:00:43 -0400

164 lines

Re: Velcro straps for matrix trays?

Drew meyer <[log in to unmask]>

Fri, 25 Apr 2003 06:32:07 -0500

207 lines

Re: Velcro straps for matrix trays?

Dehoyos, Ramon <[log in to unmask]>

Fri, 25 Apr 2003 06:08:56 -0700

74 lines

Re: Velcro straps for matrix trays?

Charles Caswell <[log in to unmask]>

Fri, 25 Apr 2003 08:33:25 -0500

109 lines

Re: Velcro straps for matrix trays?

Collins Graham <[log in to unmask]>

Fri, 25 Apr 2003 09:58:44 -0400

158 lines

Re: Velcro straps for matrix trays?

Randy Bock Sr. <[log in to unmask]>

Fri, 25 Apr 2003 10:19:20 -0400

116 lines

Re: Velcro straps for matrix trays?

Crepeau, Phil <[log in to unmask]>

Fri, 25 Apr 2003 07:20:16 -0700

25 lines

Re: Velcro straps for matrix trays?

Genny Gibbard <[log in to unmask]>

Fri, 25 Apr 2003 11:34:26 -0600

47 lines

Re: Velcro straps for matrix trays?

Gene Felder <[log in to unmask]>

Fri, 25 Apr 2003 10:47:05 -0700

130 lines

Re: Velcro straps for matrix trays?

[log in to unmask]

Mon, 28 Apr 2003 12:32:44 +0800

70 lines

New Thread

via filling

via filling

An <[log in to unmask]>

Mon, 14 Apr 2003 05:58:55 -0500

28 lines

Re: via filling

d. terstegge <[log in to unmask]>

Mon, 14 Apr 2003 13:43:32 +0200

68 lines

Re: via filling

Dave Chapman <[log in to unmask]>

Mon, 14 Apr 2003 06:46:46 -0500

63 lines

New Thread

Via Plugging

Via Plugging

Mike Williams <[log in to unmask]>

Tue, 15 Apr 2003 06:34:25 -0500

22 lines

Re: Via Plugging

Bresnan, Thomas <[log in to unmask]>

Tue, 15 Apr 2003 11:39:51 -0700

54 lines

Re: Via Plugging

Dave Chapman <[log in to unmask]>

Tue, 15 Apr 2003 13:44:21 -0500

81 lines

Re: Via Plugging

Eddie Rocha <[log in to unmask]>

Wed, 16 Apr 2003 09:45:09 -0700

25 lines

Re: Via Plugging

Dave Chapman <[log in to unmask]>

Wed, 16 Apr 2003 11:48:04 -0500

38 lines

New Thread

via-filling on build-up PCB's

via-filling on build-up PCB's

An Gielen <[log in to unmask]>

Thu, 24 Apr 2003 03:53:23 -0500

37 lines

Re: via-filling on build-up PCB's

Leigh-Ann Litavis <[log in to unmask]>

Thu, 24 Apr 2003 09:38:24 EDT

31 lines

New Thread

Voids / Air Pockets in Laminates

Voids / Air Pockets in Laminates

Brown, William G <[log in to unmask]>

Tue, 22 Apr 2003 13:45:25 -0400

40 lines

Re: Voids / Air Pockets in Laminates

Sherif Refaat <[log in to unmask]>

Tue, 22 Apr 2003 14:55:08 -0400

86 lines

Re: Voids / Air Pockets in Laminates

Mark Hargreaves <[log in to unmask]>

Tue, 22 Apr 2003 15:06:37 -0400

88 lines

Re: Voids / Air Pockets in Laminates

David Douthit <[log in to unmask]>

Tue, 22 Apr 2003 16:40:16 -0700

110 lines

Re: Voids / Air Pockets in Laminates

Leo Lambert <[log in to unmask]>

Wed, 23 Apr 2003 09:29:40 -0100

74 lines

New Thread

Warp and Twist

Warp and Twist

Leo Lambert <[log in to unmask]>

Wed, 2 Apr 2003 15:10:36 -0100

50 lines

Re: Warp and Twist

Karl Sauter <[log in to unmask]>

Wed, 2 Apr 2003 12:30:40 -0800

85 lines

Re: Warp and Twist

Valerie St.Cyr <[log in to unmask]>

Wed, 2 Apr 2003 15:51:42 -0500

154 lines

New Thread

Warpage

Warpage

[log in to unmask]

Wed, 23 Apr 2003 12:33:55 +0530

88 lines

Re: Warpage

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Wed, 23 Apr 2003 13:09:13 -0000

128 lines

Re: Warpage

Franklin D Asbell <[log in to unmask]>

Wed, 23 Apr 2003 08:42:15 -0500

170 lines

Re: Warpage

Tim Reeves <[log in to unmask]>

Thu, 24 Apr 2003 11:29:59 -0700

69 lines

Re: Warpage

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 13:42:25 -0500

33 lines

Re: Warpage

Bill Decray <[log in to unmask]>

Thu, 24 Apr 2003 14:39:28 -0400

69 lines

Re: Warpage

Tim Reeves <[log in to unmask]>

Thu, 24 Apr 2003 11:47:18 -0700

49 lines

Re: Warpage

Dougal Stewart <[log in to unmask]>

Fri, 25 Apr 2003 09:18:47 +0100

130 lines

New Thread

Warpage... long url link...

Re: Warpage... long url link...

Grabski III, John R. <[log in to unmask]>

Wed, 23 Apr 2003 09:15:10 -0400

157 lines

New Thread

Warped boards

Warped boards

Grant Emandien <[log in to unmask]>

Thu, 24 Apr 2003 08:20:24 +0200

64 lines

Re: Warped boards

Dale Ritzen <[log in to unmask]>

Thu, 24 Apr 2003 07:36:01 -0500

127 lines

Re: Warped boards

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 08:27:01 -0500

153 lines

Re: Warped boards

Crepeau, Phil <[log in to unmask]>

Thu, 24 Apr 2003 07:26:15 -0700

222 lines

Re: Warped boards

Franklin D Asbell <[log in to unmask]>

Thu, 24 Apr 2003 09:51:53 -0500

212 lines

Re: Warped boards

Charles Caswell <[log in to unmask]>

Fri, 25 Apr 2003 08:37:26 -0500

283 lines

New Thread

Wave soldering - Spray fluxer parameters

Wave soldering - Spray fluxer parameters

Peter L <[log in to unmask]>

Mon, 7 Apr 2003 18:04:13 -0700

34 lines

Re: Wave soldering - Spray fluxer parameters

Steve Gregory <[log in to unmask]>

Mon, 7 Apr 2003 22:35:48 EDT

136 lines

Re: Wave soldering - Spray fluxer parameters

BRAD VANDERHOOF <[log in to unmask]>

Tue, 8 Apr 2003 00:56:41 -0700

91 lines

Re: Wave soldering - Spray fluxer parameters

Dehoyos, Ramon <[log in to unmask]>

Tue, 8 Apr 2003 05:43:29 -0700

99 lines

Re: Wave soldering - Spray fluxer parameters

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 8 Apr 2003 09:24:15 -0400

111 lines

New Thread

Wave soldering SMD's

Wave soldering SMD's

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 15 Apr 2003 10:41:23 -0400

45 lines

Re: Wave soldering SMD's

Dave Chapman <[log in to unmask]>

Tue, 15 Apr 2003 09:50:42 -0500

71 lines

New Thread

Wavesoldering SOT 23's

Wavesoldering SOT 23's

Rich Lasko <[log in to unmask]>

Tue, 1 Apr 2003 14:19:26 -0600

224 lines

Re: Wavesoldering SOT 23's

Roger Stoops <[log in to unmask]>

Tue, 1 Apr 2003 15:18:56 -0500

282 lines

New Thread

White Tin Processing Before Soldering

White Tin Processing Before Soldering

Richard Fudalewski <[log in to unmask]>

Tue, 1 Apr 2003 17:53:32 -0500

70 lines

New Thread

wire assembly suggestions

wire assembly suggestions

Genny Gibbard <[log in to unmask]>

Fri, 11 Apr 2003 11:20:30 -0600

116 lines

Re: wire assembly suggestions

Ray Klein <[log in to unmask]>

Fri, 11 Apr 2003 11:35:42 -0700

264 lines

Re: wire assembly suggestions

Roger Stoops <[log in to unmask]>

Fri, 11 Apr 2003 15:01:53 -0400

276 lines

Re: wire assembly suggestions

Charles Caswell <[log in to unmask]>

Fri, 11 Apr 2003 14:35:10 -0500

334 lines

Re: wire assembly suggestions

Dehoyos, Ramon <[log in to unmask]>

Fri, 11 Apr 2003 12:41:37 -0700

77 lines

Re: wire assembly suggestions

Ofer Cohen <[log in to unmask]>

Sun, 13 Apr 2003 09:49:42 +0200

228 lines

Re: wire assembly suggestions

Genny Gibbard <[log in to unmask]>

Tue, 15 Apr 2003 11:44:22 -0600

67 lines

New Thread

wire coatings

wire coatings

Genny Gibbard <[log in to unmask]>

Wed, 23 Apr 2003 13:46:35 -0600

36 lines

Re: wire coatings

Phil Nutting <[log in to unmask]>

Wed, 23 Apr 2003 16:03:21 -0400

84 lines

</