LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Roger Stoops

Tue, 4 Mar 2003 12:31:20 -0500

Debbie Goodwin

Tue, 4 Mar 2003 09:09:10 -0800

Macko, Joe @ IEC

Tue, 4 Mar 2003 09:08:28 -0800

Eric Christison

Tue, 4 Mar 2003 13:11:17 +0000

McGlaughlin, Jeffrey A

Tue, 4 Mar 2003 09:15:02 -0500

Bloomquist, Ken

Tue, 4 Mar 2003 05:54:58 -0800

Steve Gregory

Tue, 4 Mar 2003 08:48:09 EST

Geoff Layhe

Tue, 4 Mar 2003 13:14:37 -0000

0402 inch - mm ?

Zweigart, Siegmund

Tue, 4 Mar 2003 13:54:46 +0100

10 mil Mylar

Re: 10 mil Mylar

Franklin D Asbell

Thu, 20 Mar 2003 11:29:56 -0600

10 mil Mylar

David Bergman

Thu, 20 Mar 2003 11:02:31 -0600

2.3mm thick PCB and BGA

Mcmaster, Michael

Fri, 14 Mar 2003 17:10:26 -0800

Jowan Iven

Fri, 14 Mar 2003 11:40:05 +0100

Marie-Elisabeth MAGNIN

Fri, 14 Mar 2003 11:01:55 +0100

: rework or removal of SOT649A

Fri, 14 Mar 2003 17:33:24 +0800

2.3mm thick PCB and BGA

ME Magnin

Fri, 14 Mar 2003 08:45:05 +0100

Re: : rework or removal of SOT649A

Zweigart, Siegmund

Tue, 11 Mar 2003 11:01:24 +0100

: rework or removal of SOT649A

pohkh

Tue, 11 Mar 2003 17:57:10 +0800

: Shining smooth solder joint on ENIG or Gold plating Board.

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

joyce

Fri, 14 Mar 2003 08:30:33 -0500

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Mike Fenner

Fri, 14 Mar 2003 09:58:33 -0000

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

DUTTON Phil

Fri, 14 Mar 2003 09:58:02 +1100

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Poh Kong Hui

Fri, 14 Mar 2003 06:29:23 +0800

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Poh Kong Hui

Fri, 14 Mar 2003 06:20:07 +0800

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Sasha Miladinovic

Wed, 12 Mar 2003 15:40:50 +0100

Rey Degollado

Thu, 20 Mar 2003 18:27:14 +0800

Adhesion without oxide?

Re: Adhesion without oxide?

Quality

Thu, 20 Mar 2003 16:31:27 -0500

Re: Adhesion without oxide?

Dougal Stewart

Thu, 20 Mar 2003 13:08:06 -0000

Adhesion without oxide?

Mike Wolf

Thu, 20 Mar 2003 07:53:31 -0500

Adhesive bonding for ferrite cores

Shoda, Steve

Tue, 25 Mar 2003 16:27:33 -0500

Peter Swanson

Tue, 25 Mar 2003 08:49:34 -0000

Phil Nutting

Fri, 21 Mar 2003 08:48:53 -0500

Brian Ellis

Fri, 21 Mar 2003 11:35:52 +0200

Adhesive bonding for ferrite cores

David Fish

Thu, 20 Mar 2003 17:24:34 -0500

Shoda, Steve

Thu, 20 Mar 2003 17:00:07 -0500

An apology...

Re: An apology...

Roland Jaquet

Sat, 29 Mar 2003 01:44:33 +0100

Re: An apology...

Carlr Ray

Fri, 28 Mar 2003 17:41:02 -0600

An apology...

Steve Gregory

Fri, 28 Mar 2003 18:21:23 EST

Anybody worked with Tra Bond 2112?

Hinners Hans M Civ WRALC/LUGE

Wed, 12 Mar 2003 21:48:48 -0000

Aperture Data

Andre Leclair

Wed, 12 Mar 2003 06:42:08 -0600

Wed, 12 Mar 2003 08:28:13 +0800

David Ricketts

Tue, 11 Mar 2003 12:46:42 -0800

John Parsons

Tue, 11 Mar 2003 08:51:50 -0800

Ahne Oosterhof

Tue, 11 Mar 2003 08:25:32 -0800

Eric Dawson

Tue, 11 Mar 2003 15:45:23 -0000

Crepeau, Phil

Tue, 11 Mar 2003 07:09:34 -0800

Re: AT&T spray fluxer parts

Bill Decray

Tue, 11 Mar 2003 08:21:13 -0500

Aperture Data

Andre Leclair

Tue, 11 Mar 2003 06:54:33 -0600

APEX food review

Re: APEX food review

Steve Gregory

Mon, 17 Mar 2003 11:36:00 EST

APEX food review

Ed Popielarski

Sun, 16 Mar 2003 18:10:07 -0800

AT&T spray fluxer parts

Dave Chapman

Thu, 27 Mar 2003 14:05:48 -0600

Bar Solder

Dave Chapman

Fri, 21 Mar 2003 15:47:50 -0600

Bare board CofC

Re: Bare board CofC

Mcmaster, Michael

Wed, 12 Mar 2003 14:41:19 -0800

Re: Bare board CofC

Steve MacDonald

Wed, 12 Mar 2003 09:23:28 -0500

Bare board CofC

Mark Hargreaves

Wed, 12 Mar 2003 08:15:51 -0500

BGA reballing

Re: BGA reballing

Mel Parrish

Tue, 18 Mar 2003 16:33:18 -0600

Re: BGA reballing

Phil Bavaro

Tue, 18 Mar 2003 10:17:35 -0800

BGA vs. QFP

Re: BGA vs. QFP

Jowan Iven

Fri, 7 Mar 2003 08:38:53 +0100

Re: BGA vs. QFP

Joe Fjelstad

Thu, 6 Mar 2003 21:33:11 EST

Re: BGA vs. QFP

Fri, 7 Mar 2003 10:28:05 +0800

BGA vs. QFP

Black, Paul

Thu, 6 Mar 2003 18:22:36 -0500

BGA's on both sides of an assembly

Tue, 1 Apr 2003 07:34:03 +0800

joyce

Mon, 31 Mar 2003 17:07:31 -0500

Dan R. Johnson

Mon, 31 Mar 2003 14:04:47 -0800

Steve Gregory

Mon, 31 Mar 2003 16:49:48 EST

Paul

Mon, 31 Mar 2003 16:05:08 -0500

Daan Terstegge

Mon, 31 Mar 2003 21:45:59 +0200

John Belcher

Mon, 31 Mar 2003 11:28:37 -0800

Dehoyos, Ramon

Mon, 31 Mar 2003 11:12:57 -0800

John Belcher

Mon, 31 Mar 2003 08:43:00 -0800

Zweigart, Siegmund

Mon, 31 Mar 2003 18:45:35 +0200

BGA's on both sides of an assembly

joyce

Mon, 31 Mar 2003 11:25:37 -0500

john Belcher

Mon, 31 Mar 2003 09:57:13 -0600

Black Contamination

Re: Black Contamination

Mon, 31 Mar 2003 09:05:08 +0800

Re: Black Contamination

David Fish

Sun, 30 Mar 2003 16:11:53 -0500

Re: Black Contamination

David Douthit

Sat, 29 Mar 2003 11:21:10 -0700

Black Contamination

Arturo Medellin

Sat, 29 Mar 2003 10:59:12 -0600

Black Oxide

Denis Morrissey

Mon, 10 Mar 2003 08:00:54 -0500

Sun, 9 Mar 2003 17:53:54 -0800

Denis Morrissey

Fri, 7 Mar 2003 07:07:28 -0500

Larry Russell

Fri, 7 Mar 2003 14:56:11 +0800

Black Oxide

Thu, 6 Mar 2003 21:10:48 -0800

Board Markers

Dave Chapman

Tue, 4 Mar 2003 11:25:04 -0600

Tue, 4 Mar 2003 12:13:20 EST

joyce

Tue, 4 Mar 2003 11:07:12 -0500

Charles Caswell

Tue, 4 Mar 2003 10:00:29 -0600

Dave Chapman

Tue, 4 Mar 2003 09:45:07 -0600

joyce

Tue, 4 Mar 2003 09:05:48 -0500

Charles Caswell

Tue, 4 Mar 2003 06:49:37 -0600

Blair K. Hogg

Mon, 3 Mar 2003 17:08:28 -0500

Board Markers

Dave Chapman

Mon, 3 Mar 2003 13:25:56 -0600

Board Shop Audit

Dwight Mattix

Mon, 31 Mar 2003 20:06:47 -0800

Jason W. Gregory

Fri, 28 Mar 2003 08:13:23 -0600

Steve Gregory

Fri, 28 Mar 2003 08:32:46 EST

Dougal Stewart

Fri, 28 Mar 2003 13:09:54 -0000

Board Shop Audit

Olivia Mc Dermott

Fri, 28 Mar 2003 11:49:57 +0000

Brian Ellis

Fri, 28 Mar 2003 13:42:31 +0200

d. terstegge

Fri, 28 Mar 2003 12:24:15 +0100

Class 3 Board Rework - Lifted Pads/Lands

Roland Jaquet

Fri, 28 Mar 2003 12:14:39 +0100

Board Shop Audit

Olivia Mc Dermott

Fri, 28 Mar 2003 10:30:09 +0000

cam outsourcing..

Re: cam outsourcing..

Brian Butler

Wed, 5 Mar 2003 08:26:52 -0700

Re: cam outsourcing..

Wed, 5 Mar 2003 08:38:27 +0800

Can ICs

Re: Can ICs

Creswick, Steven

Mon, 3 Mar 2003 12:16:19 -0500

Can ICs

Dehoyos, Ramon

Mon, 3 Mar 2003 06:33:03 -0800

Re: Class 3 Board Rework - Lifted Pads/Lands

Neda Thrash

Sat, 29 Mar 2003 10:23:19 EST

Re: Class 3 Board Rework - Lifted Pads/Lands

Randy Bock Sr.

Sat, 29 Mar 2003 08:07:27 -0500

Class 3 Board Rework - Lifted Pads/Lands

Dale Ritzen

Fri, 28 Mar 2003 16:09:47 -0600

component lead plating/tinning

Debbie Goodwin

Wed, 26 Mar 2003 07:42:30 -0800

Joe Fjelstad

Tue, 25 Mar 2003 23:32:48 EST

Dave Hillman

Tue, 25 Mar 2003 20:44:15 -0600

Wenger, George M.

Tue, 25 Mar 2003 18:32:02 -0600

David Douthit

Tue, 25 Mar 2003 16:58:32 -0700

component lead plating/tinning

Debbie Goodwin

Tue, 25 Mar 2003 15:35:25 -0800

Macko, Joe @ IEC

Tue, 25 Mar 2003 14:49:29 -0800

Computer Monitors and ESD

Thu, 27 Mar 2003 13:27:30 +0800

Wed, 26 Mar 2003 14:04:34 -0500

Rich Lasko

Wed, 26 Mar 2003 13:01:29 -0600

Bloomquist, Ken

Wed, 26 Mar 2003 10:34:25 -0800

Graham Collins

Wed, 26 Mar 2003 13:34:31 -0500

Computer Monitors and ESD

David Douthit

Wed, 26 Mar 2003 11:40:56 -0700

Bloomquist, Ken

Wed, 26 Mar 2003 10:07:15 -0800

Coplanarit of BGA

Re: Coplanarit of BGA

Morse, Carrie

Mon, 17 Mar 2003 14:51:42 -0500

Coplanarit of BGA

Antonio C. T. Souza

Mon, 17 Mar 2003 16:22:15 -0300

Cracking Capacitors

Werner Engelmaier

Wed, 26 Mar 2003 11:02:24 EST

FOX, Ian (York Rd)

Wed, 26 Mar 2003 08:02:25 -0000

Tue, 25 Mar 2003 13:04:31 -0500

Steve Thomas

Tue, 25 Mar 2003 09:52:54 -0800

FOX, Ian (York Rd)

Tue, 25 Mar 2003 17:41:28 -0000

Depanelizing Long V-scored PCB

joyce

Tue, 25 Mar 2003 11:38:27 -0500

Cracking Capacitors

FOX, Ian (York Rd)

Tue, 25 Mar 2003 16:37:11 -0000

Depaneling Tools

Re: Depaneling Tools

Taylor, Royce

Mon, 3 Mar 2003 05:25:37 -0600

Peter L.

Mon, 3 Mar 2003 14:24:48 -0600

Documentation numbering system

Re: Documentation numbering system

David Fish

Fri, 7 Mar 2003 10:01:07 -0500

Documentation numbering system

Dorothy Lush

Thu, 6 Mar 2003 18:41:28 -0800

Electroless Gold Industry Standard

Re: Electroless Gold Industry Standard

Rey Degollado

Tue, 25 Mar 2003 15:36:12 +0800

Re: Electroless Gold Industry Standard

Ted Kong

Mon, 24 Mar 2003 18:13:38 -0800

Electroless Gold Industry Standard

Glenn Pelkey

Mon, 24 Mar 2003 16:44:05 -0800

ESD Survey

Randy Bock Sr.

Mon, 24 Mar 2003 08:37:17 -0500

Sun, 23 Mar 2003 13:23:13 EST

Randy Bock Sr.

Fri, 21 Mar 2003 17:15:19 -0500

Re: excess copper at etch

David Fish

Fri, 21 Mar 2003 17:04:00 -0500

ESD Survey

Randy Bock Sr.

Fri, 21 Mar 2003 17:01:13 -0500

excess copper at etch

Rudy Sedlak

Fri, 28 Mar 2003 17:06:58 EST

Re: excess copper at etch

Mark Mazzoli

Fri, 28 Mar 2003 09:03:19 -0800

excess copper at etch

Russell Burdick

Fri, 28 Mar 2003 08:24:44 -0700

Excess Flux

Re: Excess Flux

Brian Ellis

Mon, 24 Mar 2003 15:14:17 +0200

Excess Flux

Olivia Mc Dermott

Mon, 24 Mar 2003 11:53:40 +0000

exhausting a wave solder machine

Black, Paul

Tue, 18 Mar 2003 11:41:25 -0500

Leo Lambert

Tue, 18 Mar 2003 10:56:14 -0200

Ed Popielarski

Tue, 18 Mar 2003 06:40:31 -0800

Black, Paul

Tue, 18 Mar 2003 08:48:33 -0500

Brian Ellis

Tue, 18 Mar 2003 10:44:50 +0200

Mon, 17 Mar 2003 19:14:16 EST

J&J Technologies

Mon, 17 Mar 2003 17:32:08 -0500

exhausting a wave solder machine

Cagle, James

Mon, 17 Mar 2003 17:08:44 -0500

Jack Goble

Mon, 17 Mar 2003 16:00:43 -0600

Files with *.PCB Extension...

Files with *.PCB Extension...

Tom Burek

Wed, 12 Mar 2003 14:20:04 -0500

Fineline Circuits, Inc.

Wed, 12 Mar 2003 13:27:09 -0800

Ofer Cohen

Wed, 12 Mar 2003 19:18:58 +0200

Reid, Lorraine

Wed, 12 Mar 2003 16:15:34 -0000

Gary Bremer

Wed, 12 Mar 2003 11:15:03 -0500

d. terstegge

Wed, 12 Mar 2003 17:09:09 +0100

Paul

Wed, 12 Mar 2003 10:59:42 -0500

Gordon McAlpine

Wed, 12 Mar 2003 15:49:50 -0000

Donald Kyle

Wed, 12 Mar 2003 09:43:41 -0600

McGlaughlin, Jeffrey A

Wed, 12 Mar 2003 10:43:31 -0500

Wed, 12 Mar 2003 10:43:05 -0500

Bill Decray

Wed, 12 Mar 2003 10:40:47 -0500

Files with *.PCB Extension...

David Rolfe

Wed, 12 Mar 2003 10:39:09 -0500

Steve Gregory

Wed, 12 Mar 2003 10:35:55 EST

Finger cots/Gloves/nothing?

Gene Felder

Fri, 7 Mar 2003 16:26:54 -0800

Phil Nutting

Fri, 7 Mar 2003 16:59:48 -0500

Chris Almeras

Fri, 7 Mar 2003 16:24:17 -0500

Goldman, Patricia J.

Fri, 7 Mar 2003 16:08:39 -0500

Nancy Trumbull

Thu, 6 Mar 2003 12:06:01 -0500

Dieselberg, Ron

Thu, 6 Mar 2003 07:58:43 -0500

Morse, Carrie

Wed, 5 Mar 2003 17:55:11 -0500

Morse, Carrie

Wed, 5 Mar 2003 17:51:31 -0500

Finger cots/Gloves/nothing?

Dave Dixon

Wed, 5 Mar 2003 16:15:39 -0600

Howard Watson

Wed, 5 Mar 2003 14:45:47 -0700

Finish and material

Re: Finish and material

Dougal Stewart

Mon, 3 Mar 2003 13:56:16 -0000

Finish and material

Ofer Cohen

Mon, 3 Mar 2003 14:16:20 +0200

First Pass Yields

Joe Fjelstad

Mon, 3 Mar 2003 17:14:30 EST

Joe Fjelstad

Mon, 3 Mar 2003 17:10:34 EST

Rich Lasko

Mon, 3 Mar 2003 15:29:16 -0600

Smith, Russell (US LA)

Mon, 3 Mar 2003 12:14:37 -0800

Shoda, Steve

Mon, 3 Mar 2003 14:27:28 -0500

Smith, Russell (US LA)

Mon, 3 Mar 2003 11:23:00 -0800

Randy Bock Sr.

Mon, 3 Mar 2003 14:19:02 -0500

Flex circuit covercoat question

Smith, Russell (US LA)

Mon, 3 Mar 2003 10:55:46 -0800

Quality

Thu, 20 Mar 2003 16:56:26 -0500

Brummer Chuck

Tue, 11 Mar 2003 07:29:57 -0800

Steve kelly

Tue, 11 Mar 2003 06:47:46 -0500

Flex circuit covercoat question

Brummer Chuck

Mon, 10 Mar 2003 14:29:58 -0800

Steve kelly

Mon, 10 Mar 2003 16:35:52 -0500

Flux Contamination Testing

Fri, 21 Mar 2003 09:32:12 -0600

Dewey Whittaker

Fri, 21 Mar 2003 07:31:07 -0700

Bloomquist, Ken

Fri, 21 Mar 2003 06:18:32 -0800

Graham Naisbitt

Fri, 21 Mar 2003 10:50:23 +0000

Brian Ellis

Fri, 21 Mar 2003 11:45:36 +0200

BRAD VANDERHOOF

Fri, 21 Mar 2003 01:18:07 -0800

Tegehall Per-Erik

Fri, 21 Mar 2003 08:34:15 +0100

BRAD VANDERHOOF

Thu, 20 Mar 2003 23:06:08 -0800

Flux Contamination Testing

David Douthit

Thu, 20 Mar 2003 19:25:40 -0700

Bloomquist, Ken

Thu, 20 Mar 2003 13:42:09 -0800

FR-4 outgassing

Re: FR-4 outgassing

joyce

Fri, 28 Mar 2003 11:34:47 -0500

Re: FR-4 outgassing

Donald Durett

Thu, 27 Mar 2003 13:48:45 -0500

FR-4 outgassing

Dan R. Johnson

Thu, 27 Mar 2003 10:35:15 -0800

FR4 Cold temp profile

Arvin M.

Thu, 13 Mar 2003 10:23:36 +0800

Future 1 solder machine

Re: Future 1 solder machine

Keith Stone

Mon, 17 Mar 2003 10:39:31 -0600

Re: Future 1 solder machine

Dehoyos, Ramon

Fri, 14 Mar 2003 07:41:16 -0800

Future 1 solder machine

Jack Goble

Thu, 13 Mar 2003 14:05:59 -0600

Gerber data

Re: Gerber data

David Fish

Fri, 21 Mar 2003 08:37:08 -0500

Gerber data

Charlie Pitarys

Thu, 20 Mar 2003 11:08:36 -0500

gerber viewers..

Re: gerber viewers..

d. terstegge

Tue, 4 Mar 2003 08:41:06 +0100

Re: gerber viewers..

Craig Cullum

Mon, 3 Mar 2003 16:01:04 -0600

Re: gerber viewers..

Dave Chapman

Mon, 3 Mar 2003 16:05:36 -0600

gerber viewers..

Sergio T. Ruiz

Mon, 3 Mar 2003 17:04:00 -0500

gerber viewers.. - DRC capabilities

Ofer Cohen

Tue, 4 Mar 2003 09:57:56 +0200

German Silver

Dan R. Johnson

Wed, 12 Mar 2003 12:57:01 -0800

Dave Hillman

Wed, 12 Mar 2003 14:27:03 -0600

Dave Hillman

Wed, 12 Mar 2003 14:19:32 -0600

Dan R. Johnson

Wed, 12 Mar 2003 08:07:06 -0800

Bev Christian

Wed, 12 Mar 2003 11:01:14 -0500

Dan R. Johnson

Wed, 12 Mar 2003 07:58:50 -0800

Crepeau, Phil

Wed, 12 Mar 2003 07:00:29 -0800

Dave Hillman

Wed, 12 Mar 2003 07:34:42 -0600

Glue suppliers for chip-on-wave assembly

Brian Ellis

Wed, 12 Mar 2003 15:15:48 +0200

German Silver

Bev Christian

Wed, 12 Mar 2003 07:57:40 -0500

Brian Toleno

Thu, 6 Mar 2003 13:22:33 -0800

Jowan Iven

Thu, 6 Mar 2003 08:25:59 +0100

Mark Charlton

Wed, 5 Mar 2003 12:00:18 -0500

Glue suppliers for chip-on-wave assembly

Morse, Carrie

Wed, 5 Mar 2003 11:56:26 -0500

McCall,Doug

Wed, 5 Mar 2003 15:16:45 -0000

Gold Tarnish.

Re: Gold Tarnish.

Mike Fenner

Wed, 12 Mar 2003 09:16:21 -0000

Re: Gold Tarnish.

Anil Kher

Wed, 12 Mar 2003 13:04:12 +0530

Gold Tarnish.

Steve MacDonald

Tue, 11 Mar 2003 10:55:00 -0500

Hakko Hot Air Rework Equipment (Model 850)

Re: Hakko Hot Air Rework Equipment (Model 850)

Rich Lasko

Thu, 13 Mar 2003 13:18:20 -0600

Re: Hakko Hot Air Rework Equipment (Model 850)

Steve Gregory

Thu, 13 Mar 2003 14:09:40 EST

Hakko Hot Air Rework Equipment (Model 850)

Rich Lasko

Thu, 13 Mar 2003 12:45:02 -0600

handsome side filler photo needed

joyce

Thu, 20 Mar 2003 11:45:34 -0500

handsome side fillet photo needed

Re: handsome side fillet photo needed

joyce

Thu, 20 Mar 2003 14:06:36 -0500

Heat transfer from ENIG board to aluminium casing

Re: Heat transfer from ENIG board to aluminium casing

Mon, 24 Mar 2003 15:14:31 +0800

Re: Heat transfer from ENIG board to aluminium casing

Mon, 24 Mar 2003 15:09:58 +0800

Re: Heat transfer from ENIG board to aluminium casing

Tim Reeves

Wed, 19 Mar 2003 10:53:02 -0800

Re: Heat transfer from ENIG board to aluminium casing

joyce

Wed, 19 Mar 2003 07:55:03 -0500

Re: Heat transfer from ENIG board to aluminium casing

David Douthit

Tue, 18 Mar 2003 12:40:57 -0700

Re: Heat transfer from ENIG board to aluminium casing

Dave Hillman

Tue, 18 Mar 2003 10:04:10 -0600

Re: Heat transfer from ENIG board to aluminium casing

FOX, Ian (York Rd)

Tue, 18 Mar 2003 14:44:31 -0000

Re: Heat transfer from ENIG board to aluminium casing

Dave Hillman

Tue, 18 Mar 2003 07:46:48 -0600

Re: Heat transfer from ENIG board to aluminium casing

Brian Ellis

Tue, 18 Mar 2003 14:54:55 +0200

Heat transfer from ENIG board to aluminium casing

d. terstegge

Mon, 17 Mar 2003 11:32:59 +0100

How to hold component in socket

How to hold component in socket

Victor Hernandez

Thu, 20 Mar 2003 05:33:21 -0600

Genny Gibbard

Wed, 19 Mar 2003 15:57:16 -0600

joyce

Wed, 19 Mar 2003 08:02:38 -0500

Ted Kong

Tue, 18 Mar 2003 13:21:41 -0800

Dan R. Johnson

Tue, 18 Mar 2003 10:20:25 -0800

Genny Gibbard

Tue, 18 Mar 2003 11:50:05 -0600

Phil Nutting

Tue, 18 Mar 2003 12:41:34 -0500

Randy Bock Sr.

Tue, 18 Mar 2003 12:46:52 -0500

Coleman, Bill

Tue, 18 Mar 2003 10:27:55 -0700

Dan R. Johnson

Tue, 18 Mar 2003 09:17:29 -0800

Roger Stoops

Tue, 18 Mar 2003 12:11:37 -0500

Brian Ellis

Tue, 18 Mar 2003 18:47:13 +0200

Cagle, James

Tue, 18 Mar 2003 11:29:53 -0500

How to hold component in socket

Blair K. Hogg

Tue, 18 Mar 2003 11:32:19 -0500

Genny Gibbard

Tue, 18 Mar 2003 10:17:30 -0600

HTML

Re: HTML

Jeff Seeger

Fri, 14 Mar 2003 10:56:09 -0500

Re: HTML

Mike Fenner

Fri, 14 Mar 2003 15:49:12 -0000

HTML

J. Brewer

Fri, 14 Mar 2003 10:03:33 -0500

Humidity Chart Recorders

Morse, Carrie

Mon, 17 Mar 2003 11:36:27 -0500

Bill Christoffel

Mon, 17 Mar 2003 08:02:07 -0600

Randy Bock Sr.

Sat, 15 Mar 2003 07:47:45 -0500

Dave Dixon

Fri, 14 Mar 2003 16:43:34 -0600

Humidity Chart Recorders

Peter Wong

Fri, 14 Mar 2003 14:13:06 -0800

info requested

Eddie Rocha

Wed, 5 Mar 2003 10:02:59 -0800

Ofer Cohen

Wed, 5 Mar 2003 19:35:20 +0200

Wed, 5 Mar 2003 12:09:33 EST

IPC Printed Circuits Expo - Important Information From Show Management

Tom Waznis

Wed, 5 Mar 2003 09:03:37 -0800

info requested

Genny Gibbard

Wed, 5 Mar 2003 10:42:04 -0600

Ionic Equivalence

Re: Ionic Equivalence

Patrick Sullivan

Mon, 3 Mar 2003 10:24:05 -0500

Jack Crawford

Tue, 18 Mar 2003 17:53:12 -0600

IPC Revamps Web Site www.ipc.org

Jack Crawford

Fri, 21 Mar 2003 09:59:17 -0600

IPC SMEMA Council APEX - Important Information From Show Management

Jack Crawford

Tue, 18 Mar 2003 19:03:09 -0600

IPC Solder Paste Tack Testing

Re: IPC Solder Paste Tack Testing

Steve Gregory

Wed, 19 Mar 2003 10:23:40 EST

IPC Solder Paste Tack Testing

Bev Christian

Wed, 19 Mar 2003 10:01:59 -0500

IPC Test Board

Roland Jaquet

Fri, 28 Mar 2003 16:17:45 +0100

IPC-7721 Conformance Levels

Neda Thrash

Thu, 27 Mar 2003 14:26:03 EST

Thu, 27 Mar 2003 13:17:36 +0800

Crepeau, Phil

Wed, 26 Mar 2003 08:59:35 -0800

Ted Tontis, C.I.D.

Wed, 26 Mar 2003 09:53:33 -0600

Rich Lasko

Wed, 26 Mar 2003 09:47:19 -0600

Jeff Ferry

Wed, 26 Mar 2003 10:08:28 -0500

IPC-7721 Conformance Levels

Nowland, Russell Howard (Russell)

Wed, 26 Mar 2003 08:41:48 -0600

Rich Lasko

Wed, 26 Mar 2003 08:33:50 -0600

Iron for Electrolytic Copper Plating

Re: Iron for Electrolytic Copper Plating

Barmuta, Mike

Tue, 18 Mar 2003 10:02:31 -0800

Re: Iron for Electrolytic Copper Plating

Sencer Sofuoglu

Tue, 18 Mar 2003 10:32:53 -0600

Re: Iron for Electrolytic Copper Plating

Barmuta, Mike

Mon, 17 Mar 2003 14:14:27 -0800

Iron for Electrolytic Copper Plating

Sencer Sofuoglu

Fri, 14 Mar 2003 14:39:11 -0600

Is anyone going to Apex?

Ed Valentine

Fri, 21 Mar 2003 14:37:33 -0500

Howard Watson

Fri, 21 Mar 2003 11:16:29 -0500

Ed Popielarski

Fri, 21 Mar 2003 06:35:34 -0800

Werner Engelmaier

Fri, 21 Mar 2003 00:59:54 EST

Debbie Goodwin

Thu, 20 Mar 2003 12:24:43 -0800

Steve Gregory

Thu, 20 Mar 2003 15:25:23 EST

Debbie Goodwin

Thu, 20 Mar 2003 12:05:05 -0800

Tempea, Ioan

Thu, 20 Mar 2003 14:27:38 -0500

Steve Gregory

Thu, 20 Mar 2003 14:19:31 EST

Howard Watson

Thu, 20 Mar 2003 11:19:03 -0500

Dan R. Johnson

Thu, 20 Mar 2003 08:03:29 -0800

joyce

Thu, 20 Mar 2003 10:33:14 -0500

Nowland, Russell Howard (Russell)

Thu, 20 Mar 2003 09:30:59 -0600

Debbie Goodwin

Thu, 20 Mar 2003 07:00:17 -0800

Jason W. Gregory

Thu, 20 Mar 2003 08:38:32 -0600

Kester Solder-Nu replacement

Devlin, Dan

Thu, 20 Mar 2003 09:17:26 -0500

Is anyone going to Apex?

Ed Popielarski

Thu, 20 Mar 2003 05:55:25 -0800

J-Std-001B

Yannick Brisson

Thu, 13 Mar 2003 07:23:38 -0500

Charles Caswell

Tue, 11 Mar 2003 10:21:27 -0600

Black, Paul

Tue, 11 Mar 2003 10:55:05 -0500

joyce

Wed, 5 Mar 2003 11:01:09 -0500

Charles Caswell

Wed, 5 Mar 2003 09:49:47 -0600

joyce

Wed, 5 Mar 2003 10:31:23 -0500

Laminate voids & resin recession

Charles Caswell

Wed, 5 Mar 2003 09:10:06 -0600

Wed, 26 Mar 2003 11:22:52 +0530

Tim Reeves

Tue, 25 Mar 2003 15:23:44 -0800

Geoff Layhe

Tue, 25 Mar 2003 13:04:44 -0000

Laminate voids & resin recession

Rick

Tue, 25 Mar 2003 07:13:59 -0500

Tue, 25 Mar 2003 15:14:07 +0530

Leadfree alloy supplier

Re: Leadfree alloy supplier

Mike Fenner

Mon, 10 Mar 2003 12:15:03 -0000

Re: Leadfree alloy supplier

Tempea, Ioan

Fri, 7 Mar 2003 12:19:27 -0500

Leadfree alloy supplier

Gerard O'Brien

Fri, 7 Mar 2003 11:29:45 -0500

LGA Processing

Carlr Ray

Thu, 6 Mar 2003 10:49:25 -0600

Looking for X-Ray service

Re: Looking for X-Ray service

Crepeau, Phil

Tue, 25 Mar 2003 16:47:11 -0800

Re: Looking for X-Ray service

Macko, Joe @ IEC

Tue, 25 Mar 2003 14:59:05 -0800

Looking for X-Ray service

Debbie Goodwin

Tue, 25 Mar 2003 14:42:42 -0800

material data pink bubble wrap

Re: material data pink bubble wrap

Lee Whiteman

Mon, 31 Mar 2003 11:50:16 -0500

Re: material data pink bubble wrap

David Fish

Mon, 31 Mar 2003 11:12:22 -0500

material data pink bubble wrap

joyce

Mon, 31 Mar 2003 09:50:47 -0500

Material for fabrication of PCB for Smart Card applicati on.

Re: Material for fabrication of PCB for Smart Card applicati on.

Geoff Layhe

Fri, 21 Mar 2003 13:47:28 -0000

Material for fabrication of PCB for Smart Card application.

Raghavendra Rao

Fri, 21 Mar 2003 18:44:01 +0530

Mercury Free Cert

David Douthit

Fri, 21 Mar 2003 15:43:07 -0700

Tim Reeves

Fri, 21 Mar 2003 10:10:58 -0800

David Douthit

Fri, 21 Mar 2003 11:16:32 -0700

Tim Reeves

Fri, 21 Mar 2003 09:49:49 -0800

Quality

Thu, 20 Mar 2003 16:39:44 -0500

Morse, Carrie

Tue, 18 Mar 2003 12:17:34 -0500

Rudy Sedlak

Tue, 18 Mar 2003 11:27:01 EST

Brian Ellis

Tue, 18 Mar 2003 18:19:47 +0200

Rudy Sedlak

Tue, 18 Mar 2003 10:45:22 EST

Mike Fenner

Tue, 18 Mar 2003 13:58:34 -0000

Bev Christian

Tue, 18 Mar 2003 08:10:52 -0500

Mixing fluxes - documentation vacuum

Brian Ellis

Tue, 18 Mar 2003 15:01:50 +0200

Mercury Free Cert

Mark Hargreaves

Tue, 18 Mar 2003 07:46:00 -0500

Barry Gallegos

Thu, 13 Mar 2003 08:33:46 -0700

Hernandez, Victor G

Thu, 13 Mar 2003 08:58:14 -0600

Phil Kinner

Thu, 13 Mar 2003 14:38:41 -0000

Brian Ellis

Thu, 13 Mar 2003 16:29:18 +0200

Phil Kinner

Thu, 13 Mar 2003 13:59:19 -0000

Bev Christian

Thu, 13 Mar 2003 08:25:53 -0500

Cagle, James

Wed, 12 Mar 2003 13:52:11 -0500

Graham Naisbitt

Tue, 11 Mar 2003 18:29:50 +0000

Dave Hillman

Tue, 11 Mar 2003 09:45:04 -0600

Mel Parrish

Tue, 11 Mar 2003 09:44:21 -0600

Zweigart, Siegmund

Tue, 11 Mar 2003 15:57:05 +0100

Brian Ellis

Tue, 11 Mar 2003 16:41:19 +0200

Mixing fluxes - documentation vacuum

Guy Ramsey

Tue, 11 Mar 2003 09:29:19 -0500

Vivari, John

Tue, 11 Mar 2003 09:10:50 -0500

Mixing fluxes - more

Steve Thomas

Tue, 11 Mar 2003 09:42:03 -0800

Mel Parrish

Tue, 11 Mar 2003 11:27:20 -0600

Tue, 11 Mar 2003 11:20:27 -0600

Graham Collins

Tue, 11 Mar 2003 11:57:24 -0500

Phil Nutting

Tue, 11 Mar 2003 11:47:57 -0500

Mixing fluxes - very little TechContent

Tom Parkinson - Quality System Manager - WinTronics, Inc.

Tue, 11 Mar 2003 11:39:13 -0500

Re: Mixing fluxes - very little TechContent

Genny Gibbard

Tue, 11 Mar 2003 08:52:11 -0600

Mouse bites on inner layers

Re: Mouse bites on inner layers

paul reid

Fri, 28 Mar 2003 11:49:18 -0500

Mousebites on innerlayers

Dougal Stewart

Fri, 28 Mar 2003 17:02:54 -0000

Dougal Stewart

Fri, 28 Mar 2003 16:56:12 -0000

Hernandez, Victor G

Fri, 28 Mar 2003 09:34:39 -0600

Mousebites on innerlayers

Rick

Fri, 28 Mar 2003 10:03:26 -0500

Franklin D Asbell

Fri, 28 Mar 2003 08:54:50 -0600

Mousebites on innerlayers--YES

Rudy Sedlak

Fri, 28 Mar 2003 16:54:05 EST

New IPC Webite

Re: New IPC Webite

Tim Reeves

Fri, 21 Mar 2003 09:52:43 -0800

Re: New IPC Webite

Larry Russell

Fri, 21 Mar 2003 12:09:25 +0800

Re: New IPC Webite

Steve Gregory

Thu, 20 Mar 2003 22:45:11 EST

New IPC Webite

Larry Russell

Fri, 21 Mar 2003 11:28:29 +0800

new website

joyce

Wed, 26 Mar 2003 16:48:46 -0500

non functional pad removal

Werner Engelmaier

Mon, 31 Mar 2003 00:30:12 EST

Mon, 31 Mar 2003 08:30:14 +0800

Werner Engelmaier

Fri, 28 Mar 2003 10:16:37 EST

Werner Engelmaier

Fri, 28 Mar 2003 10:16:35 EST

Fri, 28 Mar 2003 07:59:40 +0800

Eddie Rocha

Thu, 27 Mar 2003 09:37:14 -0800

Mcmaster, Michael

Thu, 27 Mar 2003 09:33:09 -0800

Franklin D Asbell

Thu, 27 Mar 2003 09:53:16 -0600

Randy Bock Sr.

Thu, 27 Mar 2003 10:29:58 -0500

Werner Engelmaier

Thu, 27 Mar 2003 09:46:36 EST

Brian Ellis

Thu, 27 Mar 2003 11:56:46 +0200

FOX, Ian (York Rd)

Thu, 27 Mar 2003 09:53:57 -0000

Thu, 27 Mar 2003 13:42:59 +0800

DUTTON Phil

Thu, 27 Mar 2003 10:12:30 +1100

Wed, 26 Mar 2003 18:05:44 EST

non functional pad removal

Franklin D Asbell

Wed, 26 Mar 2003 15:48:00 -0600

Bill Decray

Wed, 26 Mar 2003 15:33:56 -0500

non functional pads

Re: non functional pads

Dougal Stewart

Fri, 28 Mar 2003 08:53:30 -0000

Non HTML version of list?

Phil Nutting

Thu, 13 Mar 2003 16:16:49 -0500

rgrant

Thu, 13 Mar 2003 14:02:54 -0700

John Parsons

Thu, 13 Mar 2003 09:10:05 -0800

Brian Ellis

Thu, 13 Mar 2003 18:23:58 +0200

Phil Nutting

Thu, 13 Mar 2003 10:51:55 -0500

Brian Ellis

Thu, 13 Mar 2003 17:46:10 +0200

Non HTML version of list?

Werner Engelmaier

Thu, 13 Mar 2003 10:26:16 EST

J. Brewer

Thu, 13 Mar 2003 07:56:49 -0500

Non HTML version of list? NTC

Re: Non HTML version of list? NTC

Genny Gibbard

Thu, 13 Mar 2003 11:29:59 -0600

Non-HTML Version of List

Keach Sasamori

Thu, 13 Mar 2003 16:51:24 -0600

NTC first pass yield

James TerVeen

Tue, 4 Mar 2003 09:13:44 -0500

NTC first pass yield , No technical content

Re: NTC first pass yield , No technical content

Dan R. Johnson

Wed, 5 Mar 2003 10:37:43 -0800

Re: NTC first pass yield , No technical content

David Fish

Wed, 5 Mar 2003 11:54:26 -0500

Re: NTC first pass yield , No technical content

Mike Fenner

Tue, 4 Mar 2003 17:52:57 -0000

NTC, A tribute...

Roland Jaquet

Mon, 31 Mar 2003 13:19:15 +0200

Bernard Kessler

Sun, 30 Mar 2003 09:31:11 -0800

Edward Szpruch

Sun, 30 Mar 2003 07:54:34 +0200

Roland Jaquet

Sat, 29 Mar 2003 00:05:11 +0100

NTC, A tribute...

Steve Gregory

Fri, 28 Mar 2003 15:35:39 EST

Ozone usage limitations

Larry Russell

Tue, 1 Apr 2003 13:56:29 +0800

David Douthit

Mon, 31 Mar 2003 22:36:48 -0700

Larry Russell

Tue, 1 Apr 2003 13:11:48 +0800

Panasonic Film Chip Capacitors and SMT Reflow

David Douthit

Mon, 31 Mar 2003 20:01:14 -0700

Ozone usage limitations

Larry Russell

Tue, 1 Apr 2003 10:02:29 +0800

Rich Lasko

Thu, 20 Mar 2003 09:47:39 -0600

Marie-Elisabeth MAGNIN

Thu, 20 Mar 2003 08:35:39 +0100

Ofer Cohen

Thu, 20 Mar 2003 09:23:19 +0200

Steve Gregory

Wed, 19 Mar 2003 18:51:36 EST

Darryl Tarpley

Wed, 19 Mar 2003 16:23:04 -0600

Steve Thomas

Wed, 19 Mar 2003 13:30:10 -0800

Bev Christian

Wed, 19 Mar 2003 16:48:10 -0500

Blair K. Hogg

Wed, 19 Mar 2003 16:13:08 -0500

Panasonic Film Chip Capacitors and SMT Reflow

Wed, 19 Mar 2003 14:12:04 -0700

Rich Lasko

Wed, 19 Mar 2003 14:51:00 -0600

PC Board thickness measurement

Mon, 3 Mar 2003 13:00:16 EST

Mcmaster, Michael

Mon, 3 Mar 2003 09:01:07 -0800

Scott Westheimer

Mon, 3 Mar 2003 11:26:07 -0500

Franklin D Asbell

Mon, 3 Mar 2003 09:31:59 -0600

Marie-Elisabeth MAGNIN

Mon, 3 Mar 2003 16:10:09 +0100

PC Board thickness measurement

Scott Westheimer

Mon, 3 Mar 2003 09:52:50 -0500

Franklin D Asbell

Mon, 3 Mar 2003 08:49:23 -0600

PCB thickness vs Hole side ( ASPECT Rratio )

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Werner Engelmaier

Sat, 22 Mar 2003 12:30:49 EST

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Guy Ramsey

Fri, 21 Mar 2003 16:04:25 -0500

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Paul Holloway

Fri, 21 Mar 2003 11:33:21 -0600

PCB thickness vs Hole side ( ASPECT Rratio )

Victor Hernandez

Fri, 21 Mar 2003 10:47:08 -0600

Picture of PWB delamination

Re: Picture of PWB delamination

Mon, 3 Mar 2003 09:58:39 EST

Re: Picture of PWB delamination

Gaby Bogdan

Mon, 3 Mar 2003 12:25:29 +0200

Picture of PWB delamination

Werner Engelmaier

Sun, 2 Mar 2003 22:16:58 EST

Plastic

Lakshmi Dwivedula

Thu, 27 Mar 2003 09:49:40 -0500

Blair K. Hogg

Thu, 27 Mar 2003 09:41:07 -0500

Stolar, Paul W

Thu, 27 Mar 2003 08:31:47 -0600

Eric Christison

Thu, 27 Mar 2003 09:57:16 +0000

Juan T. Marugán

Thu, 27 Mar 2003 03:16:04 -0600

Crepeau, Phil

Wed, 26 Mar 2003 15:45:49 -0800

jim

Wed, 26 Mar 2003 17:10:52 -0600

Plastic

Stolar, Paul W

Wed, 26 Mar 2003 16:57:21 -0600

PLCC socket removal

ME Magnin

Wed, 5 Mar 2003 09:05:48 +0100

Jeff Ferry

Tue, 4 Mar 2003 13:52:30 -0500

Charles Caswell

Tue, 4 Mar 2003 12:53:24 -0600

Probimer 65 - Probimer 77

Kathy Kuhlow

Tue, 4 Mar 2003 12:30:46 -0600

PLCC socket removal

Black, Paul

Tue, 4 Mar 2003 13:23:46 -0500

Re: Probimer 65 - Probimer 77

Barmuta, Mike

Wed, 5 Mar 2003 11:01:42 -0800

Probimer 65 - Probimer 77

Zweigart, Siegmund

Wed, 5 Mar 2003 16:33:40 +0100

Problem of delamination with a silver filled board

Re: Problem of delamination with a silver filled board

Tue, 11 Mar 2003 14:40:08 EST

Re: Problem of delamination with a silver filled board

Dougal Stewart

Tue, 11 Mar 2003 09:21:38 -0000

Re: Problem of delamination with a silver filled board

Mcmaster, Michael

Mon, 10 Mar 2003 16:50:46 -0800

Problem of delamination with a silver filled board

Arbour, Michel

Mon, 10 Mar 2003 13:45:56 -0500

production shifts from Western Europe to Eastern Europe and A sia.

Re: FW: production shifts from Western Europe to Eastern Europe and A sia.

Mon, 31 Mar 2003 10:29:24 -0500

Re: FW: production shifts from Western Europe to Eastern Europe and A sia.

Crepeau, Phil

Mon, 31 Mar 2003 07:23:53 -0800

FW: production shifts from Western Europe to Eastern Europe and A sia.

Zweigart, Siegmund

Mon, 31 Mar 2003 14:11:16 +0200

Properties of copper foil

Re: Properties of copper foil

Werner Engelmaier

Mon, 24 Mar 2003 21:07:27 EST

Re: Properties of copper foil

Brummer Chuck

Mon, 24 Mar 2003 14:21:51 -0800

Properties of copper foil

Jim

Mon, 24 Mar 2003 14:32:48 -0600

PTH clearance between pad and gnd plane

Phil Nutting

Mon, 31 Mar 2003 12:34:48 -0500

Genny Gibbard

Mon, 31 Mar 2003 11:27:43 -0600

Phil Nutting

Mon, 31 Mar 2003 12:22:00 -0500

Fri, 28 Mar 2003 07:52:22 +0800

PTH clearance between pad and gnd plane

Eddie Rocha

Thu, 27 Mar 2003 09:15:10 -0800

Phil Nutting

Thu, 27 Mar 2003 09:38:18 -0500

QTA becomes a CLEAN Machine!

Re: QTA becomes a CLEAN Machine!

Randy Bock Sr.

Sat, 1 Mar 2003 14:13:30 -0500

QTA becomes a CLEAN Machine!

Ed Popielarski

Sat, 1 Mar 2003 07:57:59 -0800

Question about crimping

Juan T. Marugán

Thu, 13 Mar 2003 07:53:26 -0600

Grabski III, John R.

Wed, 12 Mar 2003 12:43:35 -0500

Phil Nutting

Wed, 12 Mar 2003 08:54:22 -0500

Kasprzak, Bill (sys) USX

Wed, 12 Mar 2003 08:38:02 -0500

Renewal notice on Technet

BRAD VANDERHOOF

Tue, 11 Mar 2003 23:41:45 -0800

Question about crimping

Juan T. Marugán

Wed, 12 Mar 2003 01:16:39 -0600

Recycling

Re: Recycling

Barr, Bob

Mon, 3 Mar 2003 10:20:50 -0500

Re: Recycling

Lakshmi Dwivedula

Mon, 3 Mar 2003 10:08:22 -0500

reliabillity standards

Eddie Rocha

Thu, 13 Mar 2003 16:52:19 -0800

Re: Renewal notice on Technet

Randy Bock Sr.

Thu, 27 Mar 2003 13:16:33 -0500

Renewal notice on Technet

Keach Sasamori

Thu, 27 Mar 2003 10:18:59 -0600

Repairing

Re: Repairing

Guy Ramsey

Fri, 21 Mar 2003 13:09:34 -0500

Re: Repairing

Dave Chapman

Fri, 21 Mar 2003 11:49:53 -0600

Repairing

Cagle, James

Fri, 21 Mar 2003 12:33:13 -0500

Report card

Malewicz Wesley

Wed, 5 Mar 2003 13:13:01 -0500

Request for help ESD Simulator.

Re: Request for help ESD Simulator.

Randy Bock Sr.

Mon, 3 Mar 2003 16:04:02 -0500

Roller Tinned PCB's

Gary Camac

Tue, 25 Mar 2003 10:01:37 -0600

Mike Fenner

Tue, 25 Mar 2003 14:29:17 -0000

paul reid

Tue, 25 Mar 2003 07:24:53 -0500

Brian Ellis

Tue, 25 Mar 2003 10:27:20 +0200

Mcmaster, Michael

Mon, 24 Mar 2003 14:43:14 -0800

Screwing in place fine-pitch SMT connectors

Russ Steiner

Mon, 24 Mar 2003 16:01:06 -0500

Roller Tinned PCB's

Michael Bell

Tue, 25 Mar 2003 07:39:14 +1100

Zweigart, Siegmund

Thu, 20 Mar 2003 16:21:52 +0100

Morse, Carrie

Thu, 20 Mar 2003 10:19:13 -0500

Crepeau, Phil

Thu, 20 Mar 2003 07:15:15 -0800

Screwing in place fine-pitch SMT connectors

Morse, Carrie

Thu, 20 Mar 2003 10:13:39 -0500

McCall,Doug

Thu, 20 Mar 2003 14:48:50 -0000

Set TechNet NOMAIL

Olivia Mc Dermott

Tue, 4 Mar 2003 13:48:23 +0000

shelf life of spare parts - electronic units

Bev Christian

Wed, 26 Mar 2003 09:25:07 -0500

Dave Hillman

Tue, 25 Mar 2003 20:37:19 -0600

Wed, 26 Mar 2003 08:34:46 +0800

joyce

Tue, 25 Mar 2003 17:22:33 -0500

Dan R. Johnson

Tue, 25 Mar 2003 14:15:51 -0800

shelf life of spare parts - electronic units

Bev Christian

Tue, 25 Mar 2003 16:57:31 -0500

Sklenar Vit (RBAU-EB/MGE4)

Wed, 26 Mar 2003 08:28:16 +1100

Silver Fill Plugged Vias / Gold Body

Tue, 1 Apr 2003 08:19:07 +0800

Ted Kong

Mon, 31 Mar 2003 15:25:14 -0800

Eddie Rocha

Mon, 31 Mar 2003 15:05:01 -0800

Silver Fill Plugged Vias / Gold Body

Bill Decray

Mon, 31 Mar 2003 17:50:39 -0500

Ezequiel Cruz

Mon, 31 Mar 2003 16:23:27 -0600

Smoke damage to electronic assemblies

Thu, 27 Mar 2003 13:10:50 +0800

David Douthit

Wed, 26 Mar 2003 11:37:27 -0700

Steve Gregory

Wed, 26 Mar 2003 12:12:11 EST

Barr, Bob

Wed, 26 Mar 2003 12:02:26 -0500

Eric Dawson

Wed, 26 Mar 2003 16:48:57 -0000

Steve Gregory

Wed, 26 Mar 2003 11:28:18 EST

Bev Christian

Wed, 26 Mar 2003 09:56:46 -0500

Ofer Cohen

Wed, 26 Mar 2003 16:51:23 +0200

Guy Ramsey

Wed, 26 Mar 2003 09:29:10 -0500

Randy Bock Sr.

Wed, 26 Mar 2003 09:24:33 -0500

Smoke damage to electronic assemblies

Blair K. Hogg

Wed, 26 Mar 2003 09:18:48 -0500

Grant Emandien

Wed, 26 Mar 2003 16:09:05 +0200

SMT Component Standoffs

Fri, 21 Mar 2003 11:47:17 EST

Werner Engelmaier

Fri, 21 Mar 2003 09:15:51 EST

Bev Christian

Thu, 20 Mar 2003 17:30:17 -0500

Mel Parrish

Thu, 20 Mar 2003 15:17:57 -0600

Bev Christian

Thu, 20 Mar 2003 14:30:44 -0500

Guy Ramsey

Thu, 20 Mar 2003 14:28:19 -0500

Bev Christian

Thu, 20 Mar 2003 13:31:14 -0500

Solder analysis for 63/37

Guy Ramsey

Thu, 20 Mar 2003 13:17:55 -0500

SMT Component Standoffs

Bev Christian

Thu, 20 Mar 2003 12:56:18 -0500

Sn97Cu3 solder

Re: Sn97Cu3 solder

Mike Fenner

Fri, 21 Mar 2003 17:26:34 -0000

Sn97Cu3 solder

Phillip Hinton

Fri, 21 Mar 2003 11:33:04 EST

Louis Hart

Mon, 17 Mar 2003 14:04:16 -0500

Mike Fenner

Mon, 17 Mar 2003 16:01:28 -0000

Paul Truit

Mon, 17 Mar 2003 09:08:08 -0500

BRAD VANDERHOOF

Sat, 15 Mar 2003 02:16:33 -0800

joyce

Fri, 14 Mar 2003 12:43:19 -0500

Brian Ellis

Fri, 14 Mar 2003 18:58:38 +0200

Guy Ramsey

Fri, 14 Mar 2003 11:31:57 -0500

Mike Fenner

Fri, 14 Mar 2003 16:29:35 -0000

Hinners Hans M Civ WRALC/LUGE

Fri, 14 Mar 2003 11:22:59 -0500

Solder analysis for 63/37

Morse, Carrie

Fri, 14 Mar 2003 11:19:34 -0500

Paul Truit

Fri, 14 Mar 2003 11:04:56 -0500

Solder ball composition

paresh limaye

Fri, 7 Mar 2003 14:17:47 +0100

Hernandez, Victor G

Fri, 7 Mar 2003 06:49:01 -0600

Devlin, Dan

Thu, 6 Mar 2003 16:27:33 -0500

Nowland, Russell Howard (Russell)

Thu, 6 Mar 2003 15:19:41 -0600

Blair K. Hogg

Thu, 6 Mar 2003 16:00:07 -0500

Solder Paste with 0.4% silver

Nowland, Russell Howard (Russell)

Thu, 6 Mar 2003 14:47:57 -0600

Solder ball composition

Victor Hernandez

Thu, 6 Mar 2003 14:40:06 -0600

Re: Solder Paste with 0.4% silver

Dave Hillman

Mon, 24 Mar 2003 11:08:14 -0600

Re: Solder Paste with 0.4% silver

Jason W. Gregory

Sat, 22 Mar 2003 06:31:38 -0600

Solder Paste with 0.4% silver

Poh Kong Hui

Sat, 22 Mar 2003 19:50:17 +0800

Solvents document

Brian Ellis

Mon, 3 Mar 2003 15:00:30 +0200

Splicing 8mm SMT tape

Hal Winslow

Wed, 12 Mar 2003 13:12:39 -0500

Squeegee blades for printers

Vivari, John

Thu, 20 Mar 2003 09:04:39 -0500

Dan R. Johnson

Wed, 19 Mar 2003 07:54:13 -0800

Jowan Iven

Wed, 19 Mar 2003 10:45:00 +0100

Mike Fenner

Wed, 19 Mar 2003 09:11:56 -0000

BRAD VANDERHOOF

Wed, 19 Mar 2003 00:20:10 -0800

Steve Gregory

Tue, 18 Mar 2003 20:29:38 EST

David Fish

Tue, 18 Mar 2003 20:22:24 -0500

Steve Gregory

Tue, 18 Mar 2003 20:17:49 EST

David Fish

Tue, 18 Mar 2003 20:10:53 -0500

Coleman, Bill

Tue, 18 Mar 2003 17:53:09 -0700

Tue, 18 Mar 2003 17:57:51 EST

Squeegee blades for printers

Jason W. Gregory

Tue, 18 Mar 2003 16:32:54 -0600

Rama Vemulapalli

Tue, 18 Mar 2003 14:14:15 -0800

T&E testing at high temp

Gerard O'Brien

Mon, 3 Mar 2003 13:15:44 -0500

TCE above Tg for Dupont CB100 silver resin

Re: TCE above Tg for Dupont CB100 silver resin

Guy Ramsey

Fri, 21 Mar 2003 16:00:55 -0500

Re: TCE above Tg for Dupont CB100 silver resin

Barbara Burcham

Fri, 21 Mar 2003 14:14:06 -0600

TCE above Tg for Dupont CB100 silver resin

Arbour, Michel

Fri, 21 Mar 2003 14:51:45 -0500

Technical Conference for IPC Printed Circuits Expo 2003

Timothy A. Estes

Mon, 3 Mar 2003 12:51:56 -0700

test

Thu, 6 Mar 2003 21:05:59 -0800

Test coupon for Impedance Control Board.

Karl Sauter

Wed, 19 Mar 2003 09:11:00 -0800

Steve MacDonald

Wed, 19 Mar 2003 11:56:07 -0500

Hinners Hans M Civ WRALC/LUGE

Wed, 19 Mar 2003 14:45:41 -0000

Brian Butler

Tue, 18 Mar 2003 19:40:04 -0700

Test coupon for Impedance Control Board.

Arvin M.

Wed, 19 Mar 2003 09:19:25 +0800

Raghavendra Rao

Tue, 18 Mar 2003 17:43:49 +0530

Testing Procedures for ESD ground mats

Gene Felder

Mon, 3 Mar 2003 08:33:26 -0800

Re: testing Procedures for ESD ground mats

Paul Signorelli

Mon, 3 Mar 2003 09:20:34 -0600

Re: testing Procedures for ESD ground mats

Anthony York

Mon, 3 Mar 2003 11:00:50 +1000

Thanks to those who offered advice on smoke damage

Re: Thanks to those who offered advice on smoke damage

Randy Bock Sr.

Thu, 27 Mar 2003 08:58:29 -0500

Re: Thanks to those who offered advice on smoke damage

Ofer Cohen

Thu, 27 Mar 2003 15:50:53 +0200

Thanks to those who offered advice on smoke damage

Grant Emandien

Thu, 27 Mar 2003 15:44:55 +0200

The relations between mulit-layers and thermal transition

Jason Cheng

Wed, 19 Mar 2003 16:00:37 +0800

tin stripping

Re: tin stripping

Rudy Sedlak

Sat, 22 Mar 2003 00:07:33 EST

Re: tin stripping

Fri, 21 Mar 2003 14:28:21 EST

tin stripping

Martin Goosey

Fri, 21 Mar 2003 18:10:45 +0000

tined wire with insulated lug

Re: tined wire with insulated lug

Grabski III, John R.

Tue, 4 Mar 2003 10:08:16 -0500

Re: tined wire with insulated lug

Phil Nutting

Tue, 4 Mar 2003 10:00:25 -0500

Re: tined wire with insulated lug

Kathy Kuhlow

Tue, 4 Mar 2003 08:42:15 -0600

tined wire with insulated lug

Bissonnette, Jean-Francois

Tue, 4 Mar 2003 09:02:27 -0500

Tinning requirements

Re: Tinning requirements

Dave Hillman

Wed, 12 Mar 2003 17:13:01 -0600

Tinning requirements

Mummert, Randy

Wed, 12 Mar 2003 16:22:35 -0600

Torque Testers

Re: Torque Testers

James R. Berry

Thu, 6 Mar 2003 07:36:37 -0500

Re: Torque Testers

Randy Bock Sr.

Wed, 5 Mar 2003 17:05:15 -0500

Torque Testers

Rich Lasko

Wed, 5 Mar 2003 15:24:46 -0600

Trace Current Capacity w/ Occasional Spikes

Brown, William G

Fri, 7 Mar 2003 05:15:04 -0500

Ultrasonic Cleaning of Black Anodized Parts?

Munie, Gregory

Fri, 14 Mar 2003 10:14:56 -0600

Rudy Sedlak

Thu, 13 Mar 2003 22:01:13 EST

Dennis Fritz

Thu, 13 Mar 2003 10:03:37 EST

Guy Ramsey

Thu, 13 Mar 2003 06:16:27 -0500

Geoff Layhe

Thu, 13 Mar 2003 10:11:42 -0000

Brian Ellis

Thu, 13 Mar 2003 11:20:23 +0200

Dan R. Johnson

Wed, 12 Mar 2003 08:41:07 -0800

BRAD VANDERHOOF

Tue, 11 Mar 2003 23:50:24 -0800

Brian Ellis

Wed, 12 Mar 2003 09:22:34 +0200

Ultrasonic Cleaning of Black Anodized Parts?

Tom Waznis

Tue, 11 Mar 2003 15:20:15 -0800

Morse, Carrie

Tue, 11 Mar 2003 17:57:07 -0500

Underfill BGA on Backplane?

Liu Changkang

Mon, 24 Mar 2003 18:05:44 +0800

Via Fill and Soldermask

Crepeau, Phil

Thu, 20 Mar 2003 13:39:32 -0800

Quality

Thu, 20 Mar 2003 16:25:15 -0500

Randy Bock Sr.

Thu, 20 Mar 2003 15:22:27 -0500

Randy Bock Sr.

Thu, 20 Mar 2003 15:17:55 -0500

Tim Reeves

Thu, 20 Mar 2003 11:36:21 -0800

Thu, 20 Mar 2003 12:31:56 -0500

Crepeau, Phil

Thu, 20 Mar 2003 07:07:51 -0800

joyce

Thu, 20 Mar 2003 08:33:33 -0500

David Fish

Thu, 20 Mar 2003 06:47:06 -0500

Via Fill and Soldermask

Hendy, LeRoy

Wed, 19 Mar 2003 20:27:55 -0500

Void

Re: Void

Rick Thompson

Tue, 11 Mar 2003 06:57:00 -0800

Void

Yannick Brisson

Tue, 11 Mar 2003 08:14:00 -0500

Welcome

Leigh-Ann Litavis

Mon, 10 Mar 2003 09:39:59 EST

LINO REBOREDO

Sat, 8 Mar 2003 16:40:45 +0000

Dan Mauro

Sat, 8 Mar 2003 10:42:31 -0600