Dennis,

You're not alone.......

Composite layers are when the CAM software uses several layers to create one
artwork layer i.e. what exists as one layer in Allegro e.g. your power plane
is made up of several layers in the CAM environment. (forgive me if you
already knew this!)

The fabricator only has a limited number of layers available to play with
and we have had a problem with RS274X, especially on boards with several
PWR/GND layers, where the fabricator has complained of not having enough
layers to complete all the composites.

I believe there is a Skill routine on the Cadence Web site that allows you
to reduce the number of layers needed for composites. I've never used it so
I don't know how reliable it is or if it's any good. Other than that, the
only thing I can suggest is that you talk to your fabricator.

Hope this helps.

Adam Hawes

> -----Original Message-----
> From: Dennis Ward [SMTP:[log in to unmask]]
> Sent: Wednesday, October 14, 1998 12:49 AM
> To:   [log in to unmask]
> Subject:      [DC] RS274X format problem
>
> Hello,
>
> The fab house I'm using has encountered a problem importing my RS274X
> artwork.
> I believe their software is having a hard time compositing(?) the power
> plane layers.
> I'm still unsure what exactly is happening - I plan on visiting them
> tomorrow and see
> first hand.
>
> My software (output) - Allegro designer - version 13
> Theirs (Input) - Tibor Davos - version unknown.
>
> Has anyone else experienced any difficulties with RS274X formatted power
> and ground planes
> generated from Allegro??
>
> Any (I do mean ANY) help would be appreciated.
>
> Thanks
> Dennis Ward
> Net to Net Technologies
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################