Subject: | |
From: | |
Reply To: | |
Date: | Thu, 22 Aug 2019 18:20:42 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The IPC 5-21M Committee which is developing the IPC-9797 press-fit spec
"recommends" a 1.5-4mm board thickness.
Design and acceptability criteria may require a thicker or thinner board.
On Thu, Aug 22, 2019 at 4:05 PM Steve Gregory <[log in to unmask]> wrote:
> Hi all!
>
> I thought I'd throw the question out there while I'm google-ing for it, is
> there a minimum PCB thickness that you would want to use press-fit
> technology? I'm thinking it's .062", I think I read that somewhere, now I'm
> trying to find it. But a .031" thick PCB seems too thin. Thoughts?
>
> Steve
>
> --
> Steve Gregory
> Kimco Design and Manufacturing
> Process Engineer
> (208) 322-0500 Ext. -3133
>
> --
>
>
>
> This email and any attachments are only
> for use by the intended
> recipient(s) and may contain legally privileged,
> confidential, proprietary
> or otherwise private information. Any
> unauthorized use, reproduction,
> dissemination, distribution or other
> disclosure of the contents of this
> e-mail or its attachments is strictly
> prohibited. If you have received
> this email in error, please notify the
> sender immediately and delete the
> original.
>
--
|
|
|