Sender: |
|
X-To: |
|
Date: |
Thu, 16 Oct 2008 14:31:20 +0300 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=ISO-8859-15; format=flowed |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
In the equipment we used to make, a long time ago, the test ran until
there was no further significant change or 15 minutes, whichever was the
longer. We then mathematically analysed the curve of measured
contamination against time and were able to extrapolate it to infinite
time. The shape of the curve was used to give an idea of the nature of
the contaminants (and their relative danger) and whether they were
trapped under components or whether the substrate was leaching. All
these data were on the print-out.
The danger of letting a test go along too long is that leaching from the
substrate, which may actually be harmless, may give higher levels than
the real contaminants.
Brian
Chris Schaefer wrote:
> Hey all,
>
> There is a big hubub about how our Static Ionic test machine (600SMD)
> should be configured. Meaning what industry standard and its interpretation
> dictates if the machine should be setup in auto-terminate mode or set a timed
> mode. Is a heating solution better for enabling improved measurement of OA
> species or rosin species. We use our machine to measure product coming off
> of two cleaning processes - one hot DI water and other semi-aqueous using
> soap hot DI water. I interpret the standard as saying that the test should
> continue until there is no more change in conductivity - thus meaning that it
> should be in auto-terminate mode letting the machine do the math and shut
> down when no change is measured.
>
> Any thoughts... Thanks in advance.
>
> Chris
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|