Subject: | |
From: | |
Reply To: | |
Date: | Thu, 12 May 2005 07:12:51 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
FR406 is manufactured by Isola, they have an FR4
(IS410)with a higher Td (350C). That would be a better
choice for the lead-free process. I always try to recommend
that that fab drawing notes callout the characteristics of
the material required, rather than specify a particular
supplier's product. In this case indicate the Td
requirement and allow the PCB fabricator to use his
existing supplier's product that meets the Td requirement.
Thank you,
Eddie Rocha
South Bay Circuits
Hi TechNetters
Can I use FR406 175 Degrees C laminate during a lead free
assembly process
where the reflow temp will be around 260 Degrees C. ?
The boards will be ENIG. Any disadvantages.
I know there was a thread, but I can't find it.
---------------------------------------------------
Technet Mail List provided as a service by IPC using
LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with
following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send
e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at
[log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|