Content-type: |
text/plain; charset=us-ascii |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 15 Jan 2002 11:54:44 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
In a past life we used brass shields that were tin/lead plated. They were
a few mils thick and were etched and with forming grooves for the operator
to bend at installation. This worked very well and never had a soldering
problem.
Earl Moon
<[log in to unmask] To: [log in to unmask]
.COM> cc:
Sent by: Subject: Re: [TN] RF Shield Plating
TechNet
<[log in to unmask]
RG>
01/15/02 11:24
AM
Please respond
to "TechNet
E-Mail
Forum.";
Please respond
to Earl Moon
Dan,
Can't thank you enough. I'm sure Peter thanks you as well. His problems
seems a bit different with the Ni finish. Any suggestions?
The German silver thing occurred using shields on R/F filters. It happened
several times so I contacted someone at HAC and they recommended the "pink
death" flux that did the job but not without regrets.
Thanks again,
Earl Moon
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|