Hi Jim!
Didn't find it on the site, but IPC is fixin (Alabamese) to put it on. In
fact it may be there by time this is posted. It is also attached.
Mel Parrish
Soldering Technology International
Madison, AL
256 705 5530
256 705 5538 Fax
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Marsico, James
Sent: Thursday, December 20, 2001 3:51 AM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Is the adoption notice available on the IPC web site?
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Mel Parrish [SMTP:[log in to unmask]]
Sent: Wednesday, December 19, 2001 6:31 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hans
Depending on the exact year, the 454 (Requirement 5?) reference
could be to
any number of standards including WS-6536 or 45743, but you are very
correct
they were eliminated without any identified replacement. J-STD-001
has a
recent DoD adoption notice that I can send if you like, or you can
get it
from IPC directly.
Mel
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Hinners Hans M
Civ
WRALC/LUGE
Sent: Wednesday, December 19, 2001 1:08 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hello Fellow Techies,
Thanks for the comments!
The original drawings are from the late 80's and we're conformally
coating
the assembly instead of using an insulating foam so I get to
change/improve
things.
MIL-STD-2000 came out after the drawings (which reference
MIL-STD-454). And
then there's the disconnect when both specs got canceled without an
identified replacement. I'd rather identify a non-government
specification
supporting DOD's decision to get out of the spec. business. (They
had
better solder the thing to J-STD-001 or I've got bigger problems
than
getting a good coating.)
Happy Holidays.
Hans
Integrity First - Service Before Self - Excellence in All We Do
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans M. Hinners
Electronics Engineer
Warner Robins - Air Logistics Center (WR-ALC/LUGE)
226 Cochran Street
Robins AFB GA 31098-1622
mailto:[log in to unmask]
Com: (478) 926 - 5224
Fax: (478) 926 - 4911
DSN Prefix: 468
-----Original Message-----
From: Mel Parrish [mailto:[log in to unmask]]
Sent: Wednesday, December 19, 2001 5:10 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hans
The only standard from the Mil specs that expressly addressed
acceptability
like 610 was the DOD-STD-2000, Volume 3. The other standards like
MIL-STD-2000 and 2000, Rev A included acceptability as would be
equivalent
to J-STD-001.
Mel Parrish
Soldering Technology International
Madison, AL
256 705 5530
256 705 5538 Fax
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Hinners Hans M
Civ
WRALC/LUGE
Sent: Wednesday, December 19, 2001 11:42 AM
To: [log in to unmask]
Subject: [TN] Mil Spec Equivalent for IPC-A-610
Hi All,
Can anyone remember the equivalent Mil spec for IPC-A-610?
Is it MIL-STD-454?
Hans
Integrity First - Service Before Self - Excellence in All We Do
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans M. Hinners
Electronics Engineer
Warner Robins - Air Logistics Center (WR-ALC/LUGE)
226 Cochran Street
Robins AFB GA 31098-1622
mailto:[log in to unmask]
Com: (478) 926 - 5224
Fax: (478) 926 - 4911
DSN Prefix: 468
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|