Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 22 Sep 2000 13:57:45 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Steve,
Thanks for the information. Not being too familiar with these things, is
there any problem with pressure sensitive adhesive sticking to parts or am I
looking at a non-issue? I ask because on occasion we seem to get parts that
randomly stick to the cover tape.
Rick Thompson
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Stephen R. Gregory
Sent: Friday, September 22, 2000 11:16 AM
To: [log in to unmask]
Subject: Re: [TN] Component Taping Equipment?
In a message dated 09/22/2000 12:20:07 PM Central Daylight Time,
[log in to unmask] writes:
> As a small contract manufacturer, we receive alot of components that
aren't
> machine placeable from our customers. I'm looking into the possibility
of
> putting the components on tape and reel in-house. Any feedback on
vendors
> for this equipment and the feasability/cost effectiveness of doing this
> would be appreciated. Should I even consider it or just send parts out?
>
> Thanks in advance,
>
>
> Rick Thompson
> Ventura Electronics Assembly
> 2665A Park Center Dr.
> Simi Valley, CA 93065
>
> +1 (805) 584-9858 voice
> +1 (805) 584-1529 fax
> [log in to unmask]
Hi Rick!
We've got a V-Tek machine here...it's a model that I don't think they make
any more...it's called a Compak. It's manual but we don't do any high-volume
tape and reeling. I like it because the set-up is so easy. Uses PSA
(pressure
sensitive adhesive) cover tape, so you don't have to worry about heat shoe
settings or things of that sort...
Go to:
http://www.vtekusa.com/products.htm
There will be their latest models there...they're not that expensive either.
Like I said we don't do any high volume taping, so it fits our needs pretty
good.
-Steve Gregory-
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|