Sender: |
|
X-To: |
|
Date: |
Tue, 4 Jan 2000 16:26:49 -0800 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
To all
I've been keeping out of this discussion. But one thing I don't get... why
isn't the board industry looking at a fluxless process?
Carey
-----Original Message-----
From: Kelly M. Schriver <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Tuesday, January 04, 2000 2:52 PM
Subject: Re: [TN] cleaning flex circuits
>Hi Nancy -
>
>To begin with, the cleaning media is driven by the particular flux you are
>using. This, in turn, will drive the issue of what equipment you may be
>able to use for the process. I have had good success removing RMA residues
>from flex circuits with quite a number of blended solvents in vapor
>degreasers and conveyorized spray systems. Size of the flex assembly must
>obviously be considered - there are a number of suppliers who can provide
>cleaning baskets to restrain small flexes for processing thru conveyorized
>cleaning systems. Manual cleaning would not be my first choice if I were
>dealing with a high reliability article, particularly if it were to be
>conformal coated.
>
>Another possibility might be one of the saponifiers, in either a heated
bath
>or a "dishwasher" type system.
>
>If you are not currently using a low residue ("no clean") flux, might that
>be a possibility? If this is a consideration, and you plan to conformal
>coat or use adhesives on the assembly, be sure to verify full compatibility
>of the flux residues and the specific coating material you intend to use
>before proceeding.
>
>Contact me directly if I can be of assistance.
>
>Regards - Kelly
>
>
>
>
>-----Original Message-----
>From: Nancy M. H. Holloway <[log in to unmask]>
>To: [log in to unmask] <[log in to unmask]>
>Date: Tuesday, January 04, 2000 10:57 AM
>Subject: [TN] cleaning flex circuits
>
>
>>TechNet,
>>
>> What is the best technique to clean flux off of a polyimide flex
circuit
>>after population? Thus far, we have been cleaning the flex circuits with
>>alcohol but it is time consuming and tedious. We use a machine to clean
>>rigid boards, but I am hesitant to use it for our flex circuits. How are
>>you all cleaning your soldered flexible printed circuit boards.
>>
>> Thanks,
>> Nancy
>>
>>##############################################################
>>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>>##############################################################
>>To subscribe/unsubscribe, send a message to [log in to unmask] with
following
>text in
>>the body:
>>To subscribe: SUBSCRIBE TECHNET <your full name>
>>To unsubscribe: SIGNOFF TECHNET
>>##############################################################
>>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
>additional
>>information.
>>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>>847-509-9700 ext.5365
>>##############################################################
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|