TECHNET Archives

December 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Tue, 8 Dec 2009 07:48:10 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Subject:
From:
"David D. Hillman" <[log in to unmask]>
X-cc:
In-Reply-To:
Content-Type:
text/plain; charset="US-ASCII"
MIME-Version:
1.0
Parts/Attachments:
text/plain (89 lines)
Hi Vlad - hummm, here might be a few people that would disagree with you 
on that! There are some very good published studies that show a SAC 
solderball in a tin/lead soldering process does not result in good solder 
joint integrity (even if thoroughly mixed) in many High Performance use 
environments. Sorry Vlad but the industry data does not support such a 
general statement.

Dave Hillman
Rockwell Collins
[log in to unmask]




vladimir Igoshev <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
12/08/2009 07:42 AM
Please respond to
[log in to unmask]


To
[log in to unmask]
cc

Subject
Re: [TN] SnPb SOLDER BALLS WITH SAC SOLDER PASTE






Lee,

If both of the alloys will mix thoroughly during re-flow, it shouldn't 
make much of a difference whether you solder SAC balls with the eutectic 
paste, or vise versa.

Regards,

Vladimir


------Original Message------
From: Lee Whiteman
Sender: TechNet
To: [log in to unmask]
Subject: [TN] SnPb SOLDER BALLS WITH SAC SOLDER PASTE
Sent: Dec 8, 2009 08:17

I know about the problems with soldering BGAs with SAC solder balls and 
SnPb solder paste and read plenty of papers pro and con.

I heard about a report where if you solder BGAs with SnPb solder balls 
using SAC solder paste, the resulting solder joint will be unreliable. Has 
anyone heard of anything like that? If there are any cross-sections or 
papers that you can share with me, that would be great.

Thanks again.

Lee Whiteman, PMP
Senior Member Engineering Staff
L-3 Communications East
Telephone: (856) 338-3508
FAX: (856) 338-2906
E-Mail: [log in to unmask]
 




SENTEC
11 Canadian Road, Unit 7.
Scarborough, ON M1R 5G1
Tel: (416) 899-1882
Fax: (905) 882-8812
www.sentec.ca

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2