Geoff, Most laminates are pressed at higher pressures and temps.Almost 
     anything will work other than specialty materials.
     
     Mike Doty
     P.E. Hadco TCE


______________________________ Reply Separator _________________________________
Subject: [TN] laminate in hot oil
Author:  Geoff Layhe <[log in to unmask]> at smtplink-hadco
Date:    12/1/99 5:00 PM


Here's a strange request,
     
I,ve been asked to specify a copper clad laminate for a circuit board 
which will be immersed in hot oil (80ºC) at 3000psi pressure. Anybody 
got any ideas?
     
Geoff Layhe
     
www.lamar-uk.co.uk
     
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c 
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name> 
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional 
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 
847-509-9700 ext.5365
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################