The IPC 5-21M Committee which is developing the IPC-9797 press-fit spec
"recommends" a 1.5-4mm board thickness.
Design and acceptability criteria may require a thicker or thinner board.

On Thu, Aug 22, 2019 at 4:05 PM Steve Gregory <[log in to unmask]> wrote:

> Hi all!
>
> I thought I'd throw the question out there while I'm google-ing for it, is
> there a minimum PCB thickness that you would want to use press-fit
> technology? I'm thinking it's .062", I think I read that somewhere, now I'm
> trying to find it. But a .031" thick PCB seems too thin. Thoughts?
>
> Steve
>
> --
> Steve Gregory
> Kimco Design and Manufacturing
> Process Engineer
> (208) 322-0500 Ext. -3133
>
> --
>
>
>
> This email and any attachments are only
> for use by the intended
> recipient(s) and may contain legally privileged,
>  confidential, proprietary
> or otherwise private information. Any
> unauthorized use, reproduction,
> dissemination, distribution or other
> disclosure of the contents of this
> e-mail or its attachments is strictly
>  prohibited. If you have received
> this email in error, please notify the
>  sender immediately and delete the
> original.
>


--