Sender: |
|
X-To: |
|
Date: |
Thu, 28 Oct 1999 21:01:26 EDT |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="us-ascii" |
From: |
|
Parts/Attachments: |
|
|
In a message dated 10/28/99 7:42:49 PM Central Daylight Time,
[log in to unmask] writes:
> Guys,
>
> What stencil thicknesses are typically being used for MicroBGA's?
>
> What kind of solder paste height is considered to be enough for these
> packages?
>
> Thanks
>
>
> John Harris
>
> AEMS Pty Ltd
>
Hi John!
At my past employer we had a 146-ball DSP micro-bga and I used a 4-mil
stencil and had all the bigger stuff (50-mil) "solder paste compensated"...
which means that the pads are actually overprinted a bit, this is to give you
the volume back that you took away reducing the stencil thickness to print
the micro-BGA good...it'll all wick back to the joints during reflow. Didn't
have a way to measure the solder paste height, but it seemed to work good for
me. Every board we built fired-up, and we didn't have a RMA...take it for
what it's worth. Good starting point anyway...
-Steve Gregory-
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|