TECHNET Archives

July 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Type:
text/plain
Sender:
Subject:
From:
"Maguire, James F" <[log in to unmask]>
Date:
Wed, 1 Jul 1998 08:31:22 -0700
MIME-Version:
1.0
X-To:
Jerry Cupples <[log in to unmask]>
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, "Maguire, James F" <[log in to unmask]>
Parts/Attachments:
text/plain (92 lines)
Jerry,

We recently did some testing of "double sided reflow" related to
reliability. In our testing we were wondering if reflowing a 2nd time
with the part on the "bottom" of the PWB (so gravity pulls the part away
from the PWB surface) would impact reliability (and also, if it would
stay in place during reflow).

Our results showed a) it stayed in place and b) no impact on reliability
(we've passed >1600 cycles -55/125C thermal shock with 30 min. dwells at
temp per side without any electrical intermittents.

Jim
================================================
James F Maguire
Associate Technical Fellow
Boeing
 Information, Space & Defense Systems - Phantom Works
phone  (253)657-9063
fax         (253)657-8903
pager   (206)982-3737
email     [log in to unmask]
=================================================

> ----------
> From:         Jerry Cupples[SMTP:[log in to unmask]]
> Reply To:     TechNet E-Mail Forum.;Jerry Cupples
> Sent:         Tuesday, June 23, 1998 3:15 PM
> To:   [log in to unmask]
> Subject:      [TN] ASSY: BGA sanity check
>
> Hello, TechNet....
>
> Soldering (inline convection furnace) BGA's on both sides of a board
> is
> beyond my own experience, but it seems to violate a principle (at
> least an
> imaginary one) related to the controlled collapse, or perhaps liquids
> under
> tension.
>
> For a board design using 3 commercial BGA packages (PBGA 256, eutectic
> balls on 1.27 mm pitch), am I obstinately blocking the path of
> progress by
> requesting that this package style be confined to only one surface of
> a new
> board design?
>
> If you are doing this today and it is a piece of cake, go ahead and
> brag;
> but I would prefer to hear that caution is well advised, i.e. tales of
> misery, shame and corporate disaster resulting from such mistakes. ;-)
>
>
> cheers,
>
>
>
>
> Jerry Cupples
> Interphase Corporation
> Dallas, TX USA
> http://www.iphase.com
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2