Subject: | |
From: | |
Reply To: | |
Date: | Thu, 31 Aug 1995 18:00:49 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Does anybody have any experience with L-configuration (Multiline)
tooling on outer circuit and PISM printing. We are currently
considering this system but would be interested to know whether it
improves registration significantly (both circuit to drill and
PISM to circuit).
Alternatively, is anyone aware of any printers or upgrades that
allow alignment to drilled reference targets on a volume basis (ie
fully or semi-automatic). We currently have an ORC 6626 which has
cameras and an alignment system, but this has to be carried out
manually for each panel (low throughput) and is also limited in
size.
We are also aware of a Tamarak unit, but this only aligns the two
artworks together prior to printing a batch.
Any information in these areas would be appreciated.
Tim Tatton
Development Engineer
Design to Distribution (D2D).
Kidsgrove
Stoke-on-Trent
UK
Tel: 44 1782 771000
Fax: 44 1782 787259
E-mail: [log in to unmask]
|
|
|