I would definitely use the gold finish if you have fine pitch devices. This finish is a lot smoother and will cause less defects through surface mount. I haven't seen or read any reliability reports were the length of life is any different between the two. As for solderability it is just as good if not better. It is also easier to inspect since the gold is a different color paste screening defects are easier to see and insufficient solder is also easier to detect after reflow.
Kathy
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR></HEAD>
<BODY style="FONT: 10pt Haettenschweiler; MARGIN-LEFT: 2px; MARGIN-TOP: 2px">
<DIV>I would definitely use the gold finish if you have fine pitch
devices. This finish is a lot smoother and will cause less defects through
surface mount. I haven't seen or read any reliability reports were
the length of life is any different between the two. As for solderability
it is just as good if not better. It is also easier to inspect since the
gold is a different color paste screening defects are easier to see and
insufficient solder is also easier to detect after reflow. </DIV>
<DIV> </DIV>
<DIV>Kathy </DIV></BODY></HTML>
