Sender: |
|
X-To: |
|
Date: |
Fri, 14 Apr 2000 14:56:12 -0700 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Try this site www.asg-jergens.com we use a electric torque screw driver
with a screw hopper, assemble 25,000 units a week ( 1 screw per module )
with this setup.
Jason
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Rick Thompson
Sent: Wednesday, April 12, 2000 10:44 AM
To: [log in to unmask]
Subject: [TN] Screw Tool Source Needed?
We have a fairly high-volume project coming up that requires us to install
about 30 2-56 screws per unit at final assembly. Can anyone recommend
sources of automated or semi-automated screw insertion tools? I'm hoping to
find something that will allow us to preload the tool with the screws to
avoid having the operator hand load screws one at a time. I'm assuming this
type of tooling is available but since we don't do alot of mechanical
assembly, I don't know of sources.
Thanks for your help,
Rick Thompson
Ventura Electronics Assembly
2665A Park Center Dr.
Simi Valley, CA 93065
+1 (805) 584-9858 voice
+1 (805) 584-1529 fax
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|