Try this site www.asg-jergens.com we use a electric torque screw driver with a screw hopper, assemble 25,000 units a week ( 1 screw per module ) with this setup. Jason -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Rick Thompson Sent: Wednesday, April 12, 2000 10:44 AM To: [log in to unmask] Subject: [TN] Screw Tool Source Needed? We have a fairly high-volume project coming up that requires us to install about 30 2-56 screws per unit at final assembly. Can anyone recommend sources of automated or semi-automated screw insertion tools? I'm hoping to find something that will allow us to preload the tool with the screws to avoid having the operator hand load screws one at a time. I'm assuming this type of tooling is available but since we don't do alot of mechanical assembly, I don't know of sources. Thanks for your help, Rick Thompson Ventura Electronics Assembly 2665A Park Center Dr. Simi Valley, CA 93065 +1 (805) 584-9858 voice +1 (805) 584-1529 fax [log in to unmask] ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################