I'm trying to get artwork laid out on a ceramic substrate.  Our instrumentations division can add metal and etch the artwork, but I need to get a ceramic board that already has copper with a good adhesion to the ceramic board. (I'm worried about it peeling away when the masking is removed or the card-edge connector is used)
 
I'm looking for advice on how to ensure I will get good adhesion to the ceramic and/or a company who can join the copper to the ceramic.  Any help would be appreciated. 
 
Jesse M. Fite
Mechanical Engineer
Brookhaven National Laboratory
Bldg. 911B
Upton, NY 11973
 
Tele: 631-344-2055
Fax: 631-344-5954
email: [log in to unmask]
 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------