I'm trying to get artwork laid out on a ceramic substrate. Our instrumentations division can add metal and etch the artwork, but I need to get a ceramic board that already has copper with a good adhesion to the ceramic board. (I'm worried about it peeling away when the masking is removed or the card-edge connector is used) I'm looking for advice on how to ensure I will get good adhesion to the ceramic and/or a company who can join the copper to the ceramic. Any help would be appreciated. Jesse M. Fite Mechanical Engineer Brookhaven National Laboratory Bldg. 911B Upton, NY 11973 Tele: 631-344-2055 Fax: 631-344-5954 email: [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------