Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vpIhC-0000ajC; Tue, 28 Jan 97 12:55 CST |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
<bergda> |
Date: |
Tue, 28 Jan 1997 12:55:47 -0600 (CST) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
Resent-Message-ID: |
<"xgm6a.0.n7E.rkaxo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
In-Reply-To: |
|
From [log in to unmask] Tue Jan 28 13: |
35:35 1997 |
Message-ID: |
<Pine.3.89.9701281228.A93986-0100000@ipc> |
Parts/Attachments: |
|
|
Mike, I'm not sure why I was on SST's web page, and I can't answer your
question, maybe someone on [log in to unmask] will be able to provide
information.
Regards
Dave Bergman, IPC
On Tue, 28 Jan 1997 [log in to unmask] wrote:
> Dear David
>
> I noticed your company`s name listed under conferences on Solid State
> Technology`s web page http:/www.solid-state.com with your name mentioned as
> contact person for the conference which was held between 19 and 24 December
> last year.
>
> Not having had much success here in South Africa with my enquiry, it would be
> appreciated if you could possibly assist with the following:
>
> "What are the dimensions of the smallest aluminium metallized contact pad to
> which conductive epoxies can be successfully applied on a high speed IC
> assembly line, and what epoxies would you recommend?".
>
> I would be most grateful for any assistance you could offer in this regard.
>
> Yours sincerely
>
> Mike
>
> ----
>
> Mike Crooke, P O Box 2531, Durbanville 7551,
> South Africa. Tel: (+27) (021) 975-4545.
> E-mail: <[log in to unmask]>
>
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|