Mike, I'm not sure why I was on SST's web page, and I can't answer your question, maybe someone on [log in to unmask] will be able to provide information. Regards Dave Bergman, IPC On Tue, 28 Jan 1997 [log in to unmask] wrote: > Dear David > > I noticed your company`s name listed under conferences on Solid State > Technology`s web page http:/www.solid-state.com with your name mentioned as > contact person for the conference which was held between 19 and 24 December > last year. > > Not having had much success here in South Africa with my enquiry, it would be > appreciated if you could possibly assist with the following: > > "What are the dimensions of the smallest aluminium metallized contact pad to > which conductive epoxies can be successfully applied on a high speed IC > assembly line, and what epoxies would you recommend?". > > I would be most grateful for any assistance you could offer in this regard. > > Yours sincerely > > Mike > > ---- > > Mike Crooke, P O Box 2531, Durbanville 7551, > South Africa. Tel: (+27) (021) 975-4545. > E-mail: <[log in to unmask]> > > > *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************