Subject: | |
From: | |
Date: | Fri, 20 Oct 1995 15:24:22 -0500 (CDT) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
IPC-RF-245 would be the Rigid/Flex equivalent. IPC-FC-250 would be the
1&2 sided spec. As far as the drawing, you might consider IPC-FC-249 for
1&2 sided design, MIL-STD-2118 for Rigid Flex Design and whatever
material specs (IPC-FC-241 for copper clad, FC-231 for base material and
FC-232 for covercoats and adhesives)
Hope this helps
Regards
***************************************************
David W. Bergman, Technical Director
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
708-509-9700 x340 Phone
708-509-9798 Fax
email [log in to unmask]
***************************************************
On Fri, 20 Oct 1995 [log in to unmask] wrote:
>
> What is the equivalent spec. for flex circuits that IPC-RB-276 is for
> rigid printed boards?
>
> Also, what other IPC specs should be called out on the fab drawing?
>
> Thanks in advance:
>
> --------------------------------------
> Larry L. Pucket
> Sandia National Labs.
> Dept. 2784 MS/0624
> P.O. Box 5800
> Albuquerque, NM 87185-0624
>
> Email: [log in to unmask]
> Phone: (505) 844-1711
> Fax: (505) 844-7428
>
>
|
|
|