Subject: | |
From: | |
Reply To: | |
Date: | Wed, 29 Mar 2000 17:21:33 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Peter
I know that you have a million design rules to carry about in your head when
designing these but can you also try not to forget about the pallet
manufacturer. I have put down a few design rules relating to clearances
around smt and pth parts so that effective pallets can be manufactured.
These can be found by going to our web page http://www.datumdynamics.com and
selecting "Design Rules for Selective Wave Solder".
Hope this helps, If you wish you could send me the Gerber files (embedded
aperture if possible) and I will comment and mark up any changes which would
make the board better to flow.
Regards
Fin
Finlay Buchan
Technical Director
Datum Dynamics Ltd Datum Dynamics Inc
Tel +44 (0)1290 426200 +1 401 683 5300
Fax +44 (0)1290 426212 +1 401 683 3995
Email [log in to unmask]
Web Page http://www.datumdynamics.com
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Peter Tremewen
> Sent: 29 March 2000 06:52
> To: [log in to unmask]
> Subject: [TN] Double sided mixed technology P.W.B.s....
>
>
> Hi to all,
>
> I have recently joined the list and enjoyed lurking in
> the shadows for a little while. However, the company I am working for
> has now decided to design double sided mixed technology P.W.B.s for
> manufacture. Having had little experiance with this, I would apreciate
> it if anyone out there could steer me in the corrct direction
> regarding
> some text books or articals on it...... Thanks.
>
> Peter Tremewen
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using
> LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask]
> with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm)
> for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|