TECHNET Archives

August 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
Subject:
From:
Bill Davis <[log in to unmask]>
Date:
Fri, 20 Aug 1999 13:13:45 -0700
Content-Type:
text/plain; charset="iso-8859-1"
MIME-Version:
1.0
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Bill Davis <[log in to unmask]>
Parts/Attachments:
text/plain (29 lines)
I am experiencing a contaminant on the gold contact fingers on our boards
after assembly. We have identified it as polyethylene glycol laureate, a
surfactant. We do not use use tape or boots on our fingers and our process
is a no clean process. Our incoming inspection doesn't see it there when the
bare fabs arrive, but we see it there after assembly. We are more than a
lttle mystified as to the source of this. We do use OSP on the boards (Entek
160), but this doesn't appear to be the source either.

I curious if such sufactants would be used during the manufacturing
processes of the bare fabs and could be leaching out during reflow?

 Bill Davis, Ph.D.
 Senior Scientist
[log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2