Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Thu, 17 Apr 97 09:42:45 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Thu Apr 17 09: |
35:23 1997 |
X-Status: |
|
Resent-Message-ID: |
<"WdVhi.0.OpH.YJZLp"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wHsGK-000BjYC; Thu, 17 Apr 97 09:34 CDT |
X-Mailer: |
ccMail Link to SMTP R6.00.01 |
Message-Id: |
|
Parts/Attachments: |
|
|
Kic Thermal Profiling
15950 Bernardo Center Drive
Suite E
San Diego, CA. 92127
Tel: 619-673-6050
fax: 619-673-0085
Works well with Windows based software. This works well for most all
kinds of profiling of printed circuit assemblies across the wave or
through the SMT reflow machines.
I would highly recommend the Wave Solder Optimizer to track
parameters on your wave solder machine. Parallelism, solder depth,
preheat consistency, etc. Martin Ingle is the person I deal with.
Address below.
Technology Information Corporation
P.O. Box 10121
Silver Spring, Maryland
20914-0121 USA
Phone: 301-933-7842
Fax: 301-933-7653
Hope this helps.
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: Re: ASSY: wave solder profiling
Author: <[log in to unmask]> at INTERNET
Date: 4/17/97 8:18 AM
YOU WROTE:
>Does anyone have experience with using wave solder profiling
instruments,>e.g. the Mole WaveRIDER and Alpha solder wave optimiser?
>
>Are there any other instruments out there?
>
>Do these instruments measure the critical parameters in wave solder process
setup?
>
>Have you found them usefull/reliable/easy to use?
>
>Are there any other factors I should be looking for in purchasing one?
>
>Thanks in advance for your help.
>
>David Whalley
>Manufacturing Engineering Department
>Loughborough University
>Loughborough
>Leics LE11 3TU
>UK
>
>Tel. +44(0)1509 222930
>Fax. +44(0)1509 267725
>
>[log in to unmask]
>http://info.lboro.ac.uk/departments/en/STAFF/David_Whalley/index.html
We use an ECD M.O.L.E. for all our solder profiling but are considering one
of these also. Hope you get some good replies to your question to help in
our evaluation also.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|