Recently one of our PCB houses has shipped boards with the VIAS
filled with
solder. Generally per IPC600, it states that VIAS other than blind
or buried
can be solder masked or solder (coated). Since this area is quiet in
the IPC
or J-Standards, what is your take on this. In addition on the same
boards we
see both solder mask and solder filled.
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################