Content-Type: |
text/plain; charset="iso-8859-1" |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Fri, 3 Mar 2000 08:39:12 -0000 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Marvin
If the resist is over copper and is cured/ dry, we have reasonable
success in measuring thickness with the electronic 'eddy current' devices.
We use the 'Elcometer' range, but I am sure there are others.....
If the resist is wet, you can use a 'wheel' or comb, which are specifically
designed & calibrated show the ink thickness.
There are X-ray techniques to measure dry resist thickness, but I don't know
how much they cost.
Hope some of this helps.
David Albin
Coates Circuit Products
-----Original Message-----
From: marvin v. picardal [mailto:[log in to unmask]]
Sent: 03 March 2000 20:21
To: [log in to unmask]
Subject: [TN] THICKNESS MEASUREMENT OF LIQUID RESIST
Dear technetters,
Hi all. While I am busy performing my evaluation for the
detection & identification of contamination on metal surface,
I have another question.
Is there any other method of measuring thickness of liquid resist on
a surface aside from break test or scraping? Please help.
Thanks in advance.
Marvin
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|